How to setup a Proxy server

Hi all,
I have an airpot extreme router and I want to setup a proxy server to navigate Internet. I don't see any possible setup in the menus. Is it possible to do it?
Thank you

There are a number of different types of proxy servers. The AirPort, like most Internet routers, perform as a very basic tunneling proxy or gateway by providing NAT services.
What are you trying to use a proxy server for? Are you planning on setting up a dedicated proxy server device or use a router for some proxy functions like monitoring or scanning traffic inbound/outbound of your network?

Similar Messages

How to setup a Proxy Server for SSL

Hello,
We have a proxy server that uses the same port for http and https. How can I setup a proxy server in OSB (10gR3) for my business services to use with same port for both http and https?
Thanks,
Mike.

Hi Mike,
The problem is OSB doesn't seem to let me set the same port for both http and https on a proxy.Can you please let us know the exact problem you are facing? I hope you would have referred below links as well -
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/eclipsehelp/ui_ref.html#wp1347580
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#systemadminProxyAdding
You may set the proxy server at JVM level as well (workaround).
Regards,
Anuj

PAP2T - how to setup SIP proxy and codec on PAP2T

Hello
How to setup SIP Proxy server IP addres and codec settings on PAP2T ?

Your question here appears related to or a continuation of this previous question — is this the case?
Based on the previous posting, whatever information you're receiving from the vendor support folks appears rather garbled or confused, particularly based on that "The vendor mentioned that we need to route the DNS and get it working (forwarded) on port 80 and I'd tend to avoid them." comment over there.
I'd ask the vendor for documentation and details (as on its face, a requirement for this proxy seems, well, somewhat questionable), but yes, you're probably in the Apache config files here, and probably using overrides and .htaccess if the site is low-volume, as that'll keep the changes isolated for testing.
Out of curiousity, is this proxy project part of an attempt to get this package to accessible, but without the vendor actually having the package running on port 80? (Got a pointer to the package? We can check the docs, and see if we can translate the installation requirements into something useful on OS X Server.)
Are you running 10.5 or 10.6? Both are pretty old releases.

How to setup the SMTP server in Oracle apps?

Hi,
How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
Thanks,
Bijoy
Edited by: user12070886 on Feb 6, 2013 4:26 AM
Edited by: user12070886 on Feb 6, 2013 4:27 AM

How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? No, it is not mandatory. Also please note that the mails are sent out from concurrent manager mode. Not from the database node.
Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
>
It depends on the operating system you are using. If you are using *nix then sendmail needs to be configured.
Thanks

How to size a proxy server

Can anyone provide insight into how to size a proxy server? We would be using SUN hardware... Most importantly, type of server to buy, memory, number and configuration of cache disks.
For specifics.... we would have about 4000 users, and would spread the load across at least two machines.
Thanks

Hi
Please check out the following guide
http://docs.sun.com/db/coll/S1-webproxysrvrguides
Thanks
regards
maneesh.

How to setup Adobe Media Server Professional x 2 run as cluster for load balance?

How to setup Adobe Media Server Professional x 2 run as cluster for load balance?

Hi,
Welcome to adobe forums,
Please refer to these help files in order to setup AMS as a cluster : https://helpx.adobe.com/adobe-media-server/config-admin/load-balancing.html
https://helpx.adobe.com/adobe-media-server/tech-overview/scaling-server.html
Let me know if you need any help.
Regards,
Puspendra

How to configure a proxy server for Windows Azure Tools in Visual Studio 2013

Hi Visual Studio/Azure Tools team
I would like to use the Windows Azure tools in Visual Studio 2013 to manage my Azure Web sites (Server Explorer -> Windows Azure -> Web Sites) from within my corporate network which is secured using a proxy server. Unfortunately, I am not able to use
the Windows Azure tools since the required HTTPS connection to windows azure is not going through the default configured proxy. Instead, Visual Studio tries directly to connect to port 443 which is blocked by our corporate firewall (and yes: there is no way
around using our proxy server). Other visual studio features like NuGet, updates, etc. work fine and use the configured proxy server.
So my question: How can I configure visual studio respective its Azure tools to use a proxy server instead of a direct connection? I already tried configuring the proxy server within the file devenv.exe.config but this doesn't show any effect for Windows Azure
tools.
Regards
tschaena

As we have very similar problems I consider the found solution a work arround an existing problem which will not work if corporate FW policy does not allow such changes.
In my mind, any tools in charge of dealing with some sort of FW protocols should deliver the following information, should make it absolute clear how to setup that the request packages are setup rigth at the first time.
a) proxy server
b) proxy port
c) proxy user
d) proxy users-password
e) proxy.auth.Preference="BASIC"
And for moste tools (including Visual Studio and AZUR Tools) it is absolut unclear
a) how to setup that on a per tools basis
b) OR who inherits this information from whom i.e. use the same as IE does, what if we use FireFox or any other browsers?
I understand that developers requested to cure such problem areas will often have difficulty to gain all required elemenst used to realy test the solution.
But I can tell you: I loos more time figthing down the FW setups for my clients. WHat I do at home in a sniff, takes ages to be realised by all the various clients on the market where each has to deliver the same sort of information but actually does not,
or has it just somewhere, but not in the vicinity of the demanding user.
Good examples i.e. NetBeans IDE where the Option Menu shows very clearly what information is required to pass through a FW/Proxy; but even there, the hint to start with a BASIC authentication schema is not part of this OPTION menu and must be added a JAVA
environment value. But at least, it works.
Sepp

How to setup Mobile Access Server

Hi,
I am trying to setup Mobile Access Server on my Mac Mini Server. The setup I have is a small network behind a Airport Extreme. I would like to give all users access to services using Mobile Access Server and was hoping initial setup was going to take care of that....no such luck.
What do I fill in for the local servers? How do I access this service from the outside the lan? How do I need to configure my Airport (with the other services, it happened almost automatically from the security pane).
Thanks,
Ian

Hi,
In the field for local server you just type in the local dns name for your calendar server, mail server etc... Also select which port you want publish externally and the the correct port your service is actually using on your lan (Selected under advanced tab). Make sure your mobile access server can resolv your hostnames correctly. It should point to an local ip. If an nslookup shows your public ip, you have to correct your local dns server (This is often called split dns configuration.)
To access this from outside your LAN you have setup NAT and permit the port you have configure your mobile access server to be the incomming port. How exactly you do that on the airport I am not sure, but I am sure it is explained in the user manual for the airport.
I found this video about the mobile access server on youtube: http://www.youtube.com/watch?v=_VRgl2bncZU
Hope this helps.
Bernt

How to bypass a proxy server in pocket pc 2003

Hi All,
I am trying to run a mobile web dynpro application on pocket pc emulator. As a part of this I have installed the list of installables eVC4.exe, evc4sp3.exe, Microsoft Pocket PC 2003 SDK.msi and trying to deploy the mobile web dynpro application.
Earlier I have tried the same on Blackberry, but I couldn't succeed. So I am trying it now on Pocket PC emulator. Now the issue which I am having is emulator is connecting to internet but not to server (The machine which has SAP Web Application Server).
I do not have any clue to resolve this.
I guess the problem might be to bypass the proxy in pocket pc emulator, as I done the bypassed the proxy when I deployed through desktop browser.
Could anyone please let me know if anyone of you having any idea how to bypass the proxy thru emulator or how to resolve this issue.
Emulator which I am using is Microsoft Pocket PC 2003.
Regards,
Kishore.

Hi Kishore,
Not sure whether it works but have a try..
Start>Settings>Connections>Connections> Advanced tab>Select Networks>Exceptions>Add new URL> Give the URL--> OK.
Regards,
Lakshmi

How to setup a Jabber server?

Hi,
I want to setup a Jabber server on my Archlinux machine for a couple of friends of mine to use for some personal group communication. What package can I install for such a server? I'm hoping it's easy to setup, so that's a bonus. Thanks in advance.

ejabberd is rather nice for a begginer admin/operator. I can't say anything about the quality of the provided package in [community]. Ejabberd is also distributed as a one-click-install binary which you can (with all contents) install somewhere like /opt or /usr/local/opt, and there is also a video available on process-one site which shows you how to install and setup ejabberd in under 5 minutes with it (which should tell you something about "ease of use"). For everything from installation to configuration and operating read the Ejabberd operation guide: http://www.process-one.net/en/ejabberd/guide_en

CRM 2013 - How to set a Proxy server for plugins to run with?

We have several plugins that need to query web services on the Internet, and I need them to go through a specific proxy server. How do I set this without hard coding the proxy into the plugins? I've tried adding the proxy to the machine.config,
I've updated the web.config in the CRMWeb folder, I've even added the proxy to IE under the users used by the App Pool Identity then used netsh winhttp to make this a system proxy. None of these have allowed my registered plugins to access the internet.
Any thoughts? Thanks.

The way I'd do it is to not rely on .config files, but instead set it programmatically in the plugin, and either store the proxy configuration data in the configuration string for the plugin registration step, or store it in some custom configuration entity
in CRM
Microsoft CRM MVP - http://mscrmuk.blogspot.com/ http://www.excitation.co.uk

How to set the proxy server in MIDP?

I will establish an HttpConnertion and use it to contact a website.
I use a simulators to test the HttpConnertion program by JBuilder,I can't contact the outside website. how to specify the proxy for a MIDlet application

[huangs_07],
This depends on the CLDC/MIDP implementation of the device e.g. the Palm's CLDC/kVM Java Application Manager software contains a menu for a Palm user to input the http proxy server for all the MIDlets to use when making a http connection.
What emulator are using to test your MIDlet that is making the http connection?
Allen Lai
Developer Technical Support
SUN Microsystems
http://www.sun.com/developers/support/

How to setup an Oracle server on a network

I've set up an Oracle Database server on my company network, i have an application/web server that connects to this database server.
I've configured Net8 and the service names and such, however i still cannot connect to my oracle server. The error message is "Service Name not resolved".
How can the oracle database server be setup in a Local area network for an application server to connect to it?

On the web server, check your tnsnames.ora file. Is the database correctly defined here?
Also, search this forum for "could not resolve service name". It is the most common problem.

How to set a Proxy Server for appletv

The network I'm on requires that I set a Proxy server to get out to the internet.
Is there anyway to specify a Proxy server for AppleTV?

Hi Red-Baron,
The Apple TV does not support Proxy Server configuration (http://docs.info.apple.com/article.html?artnum=305010). An alternative is to enable internet sharing on a computer and have the Apple TV connect to that computer.
Regards,
John

How to setup IOS DHCP server for redundancy?

Hi
The customer has 2 core (cat6). Plan to enable DHCP service on them for IP phones.
How to setup them so there is a redundancy for DHCP service?
Thanks in advance!

Setup two routers and have them split the range of addresses that they lease out. The pools should be non overlapping.

How to setup a Proxy server

Similar Messages

Maybe you are looking for