How to setup a trackpad to write chinese charcters ?

How to setup a trackpad to write Chinese characters?

Hooray!! I followed your instruction and it works!  Big thanks

Similar Messages

  • How to setup Oracle JDBC to suppot Chinese

    Hi, I'm using Solaris 2.6 and Oracle 8. Does anyone knows how to setup Solaris/Oracle client to support Chinese charset ? I have setup NLS_LANG to AMERICAN_AMERICA.ZHT16BIG5 and my database with ZHT16BIG5 but JDBC query still shows ????.
    Many thanks

    Try this:
    oracle.jdbc.driver.OracleDriver
    jdbc:oracle:thin:@localhost:1521:XE
    user
    password
    15

  • How to hand write chinese on Mac OS X 10.68?

    Hi, I have iMac with Mac OS 10.68, is there a way can hand write chinese like iPod?

    http://support.apple.com/kb/HT4288

  • How to setup a static IP for a wireless printer

    This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it.  For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better.  At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected".  The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
    The only way to fix this is reboot, and then the printer shows up again in Preferences.  I select it and all is well again...until a few days pass and the same thing happens again.  Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use.  I also have an Epson Artisan 725 and the same thing happens with it about once a week.  Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
    I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer.  Any help would be greatly appreciated.

    You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
    If you have AirPOrt Extreme, you could do this:
    In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
    Start up the AiPort Admin Utility
    Go to Network tab
    click + in the DHCP reservations
    Choose an IP you want for your ATV & Enter the MAC address
    From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
    It is not a static IP in a true sense, but behaves just like one.
    Works great for me...
    If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

  • How to setup the Microsoft communicator

    Hi
    What is Microsoft communicator? Is it a messenger client?
    Guys could you please tell me how to setup the Microsoft communicator (in details)
    what to write in the URL field , etc  
    Nokia E72-1 Black
    firmware : 053.001
    of 26 of nov 2010

    guys please tell me at least tell me what is the right server url of hotmail
     at first i did it with my ovi account but every time it tells me invalid url
    but when i wrote in the url bar
    ovi.com it asks me about a certificate at first i accepted once but did'nt work on the second time i accepted the cirtificate permentally and confirmed when asked it will always confirm
    and i pressed yes and also nothing happened
    then i tried to do this with hotmail but every time  i write www.hotmail.com in the server url it says invalid url
    please help me
    please
    Nokia E72-1 Black
    firmware : 053.001
    of 26 of nov 2010

  • How to setup the client application for the RMI?

    Question:
    I write a short program of RMI It contain server and client
    if server and client are run on localhost they are running ok
    but run client application on remote machine it occure issuses.
    How to setup the client on remote machine?

    hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

  • How to setup the connection between non-unicode client and unicode server?

    hi.
    we played the program in 4.6x that call a data from unicode server (ECC6.0) to non-unicode server.  ( not played in the unicode server.)
    When a program ended that English Character was normal, but Korean Chinease... was unknown text.
    I think conversion from unicode to non-unicode is a main reason.
    General Notes are issued for the unicode side rfc connection configuration.
    but, i want to know how to setup into the non-unicode system to interface with unicode system.
    I hope your great answer.

    Hi,
    For taht you have to deploy korean and chinese langauges seprately on non unicode system.Then try to connect to the unicode system.It will work for you.
    Regadrs
    Vijay kumar

  • How to Setup an ACL over a Command in solaris 2.6

    Hi all,
    Has anyone have an idea on how to setup an ACL over a command
    in solaris 2.6 . i.e: to force a user (or a group) to enter a
    password to run a command (like mount and others).
    Thanks for your help.
    haed98.
    [email protected]

    Hi head98,
    You can set ACL using setfacl commands. This way you can exclusively assign read/write/execute permissions on command that you wish. But ACL doesn't prompt for passwords or you can set passwords using ACL. One way of doing this will be to create wrapper for commands which will prompt for passwd, compare them with /etc/shadow and then execute the real command.
    Hope this helps, Thanks. SUN/DTS

  • How to setup startup script in Solaris 10

    Could anyone point me out how to setup a startup script at run level 3 or 2 in solaris 10 ?
    Any previous solaris such as 9, 8, I just write a script and put in /etc/init.d/, then link it to run level 3 or 2. But in solaris 10 is different now.
    I could not find any in the manual.
    Thanks.

    Could anyone point me out how to setup a startup
    script at run level 3 or 2 in solaris 10 ?
    Any previous solaris such as 9, 8, I just write a
    script and put in /etc/init.d/, then link it to run
    level 3 or 2. You can do the same thing in Solaris 10.
    But in solaris 10 is different now.There are alternative methods that are recommended (creating a service via a manifest file), but the old startup stuff still works just fine. You don't get the benefits of monitoring and fine-grained dependencies with the legacy startup scripts.
    I could not find any in the manual.An older doc is http://mediacast.sun.com/share/bobn/SMF-migrate.pdf. You might also check the SMF FAQ.
    http://opensolaris.org/os/community/smf/faq/ Section 4 is on manifest development.
    Darren

  • How to setup default print to landscape in Reportviewer (printmode activex)

    We have an ASP.NET (2008) application and use the ReportViewer Web Control to show a Crystal Report on the client browser.
       - We set the "PrintMode" property to ActiveX in order to print to the client's local printer.
       - We set up the Landscape in Crystal Report Page setup.
       - We also put  repdoc.PrintOptions.PaperOrientation = PaperOrientation.Landscape in the program.
    The problem is when the user clicks the print icon, the report prints in portrait, not landscape.
    Is there a solution for this or is this a software limitation?
    Thanks.

    How to setup default print to landscape in Reportviewer (printmode activex)
    Hi David,
    Yes, I tried that 1196969 solution first, but it didn't work.  I saw all the discussion in the below thread and it seems a product issue mention by you on Aug 6, 2008 3:19 PM
    CrystalReportViewer default PageOrientation  ASP.NET VS 2008
    I don't know if the fix works for CrystalReportWebFormViewer4 which is what we have on the web server. I put debug alert in the Javascript of the following file
    WindowsMicrosoft.NETv2.0.50727ASP.NETClientFilesCrystalReportWebFormViewer4crystalprinthost.html
    I can see the call goes to the file, but won't get to the window.dialogArguments.paperorientation condition.
    When I write out: window.dialogArguments.paperorientation; it pops up "undefined".
    Is there any updated solution for CrystalReportWebFormViewer4?
    Thank you!!

  • How to setup oracle database to archivelog mode and auto delete ?

    Oracle 11g R2
    - How to setup database to archive log mode and have oracle only save 24 hours of archive logs
    and delete the rest. So at any given time I will have only 24 hours of archive log and not more.
    So only 1 day of archive logs.
    - Let me know the database parameters I need to setup to accomplish this.
    - I don't want to use the RMAN
    - I am not setting up the database to archive log mode for recovery purpose. I am setting up archive log mode
    so we can use the log miner tool to dig up achives to see log activity for any performance & tuning.
    Edited by: johnpau2013 on May 9, 2012 6:09 PM

    johnpau2013 wrote:
    Thanks everyone for there responses.
    I need to rephrase and explain everyone as what I wanted to do exactly. This might help everyone understand and suggest me.
    We have oracle database 11g r2. Its a test database. Nothing is critical. We use EXPDP utility to backup the entire database every night. Which is enough for us to recover incase something happens. Even if we loose some data. That's fine.
    We are testing our web application on this oracle test database for performance & tuning.
    One thing we have noticed is that the redo logs are switching very frequently. 50MB each log file and there are 5 logs. each log switches every 40 seconds. So we wanted to see what is getting written in this redo logs. We wanted to use the LOG MINER tool in OEM to read the logs. It needed our database to be setup in archive log mode. So the log miner can read the archive logs and show us the sql's within the archive logs.
    Now when we setup the archive log mode on our database. By default the archive logs destination was set to flash recovery area ( may be oracle default archive log location is flash recovery area folder).
    We have setup the db_recovery_file_dest_size to 100GB. Now within 2 days we have filled up the flash recovery area folder. Database was frozen. Then we realized that its because oracle couldn't write archive logs. Because it reached the 100GB. Then we physically deleted files in the flash recovery area folder. Thinking it would help us start the frozen oracle database. But it didn't . The we realized that we are doing something wrong. As Oracle does not know that at OS level we deleted the files. Then temporarily we changed the db_recovery_file_dest_size to 130GB and were able to start the oracle database. Later we turned OFF the archive log mode.
    Being a rookie DBA we would have not read something properly.
    Finally:
    We wanted to know how to always keep only 1 day of archive logs (only for our performance tuning ) and not more than that. All we need this 1 day of archive logs is to use the log miner to read them. Backup is NOT our priority here. Only be able to read the archive logs from LOG MINER is PRIORITY.
    Correct me if I am wrong.Okay, so its making much more sense now, thanks for explaining your requirement.
    Database won't honor anything that you would do over the o/s without telling it. Your deletion of the archive log from the o/s location is NOT updated in the control file of the database and that's why, even when you had deleted the entire 100GB , from the db perspective, the space was still marked as used. This is the same which would happen even if you would increase the space from 100gb to whatever size as well. To delete the space, you would need to update the database's control file and that you can do from RMAN using its two commands , crosscheck backup following with deleted expired backup . The first command would find that which database backup files are NOT on the o/s which are shown in the control file and would mark all of them as expired. The second command would simply delete those expired files. This would update the control file and you would have your 100gb or whatever space, given back to you.
    To keep the archive logs of just one day, set up that Retention Policy for RMAN to either number of copies using the Redundancy option(default and set to 1) or Recovery Window. I believe for you Redundancy would be a suitable choice but you can have a read and play around with it. Setting it up would mark the files as Obsoleted and finally, you can write a small RMAN script to delete those obsoleted files.
    Now, what I don't understand is that why you want to keep on generating the archive logs just for the log miner? If you would have generated them once and figure out the reason for extensive redo generation(did you try increasing the redo log file size, 50mb seems to be smallish) , I don't think that there is any reason to keep on generating the archive logs still .
    And last part, for your question asked about that whether we can use RMAN to put the db in the archive log and is it a backup tool, yes and yes.
    HTH
    Aman....

  • How to setup the jsp service

    Hi all,
    After I setup teh weblogic and write some jsp, I cannot call the jsp up from
    my URL thur a NES.
    My configuration is
    Web-server NES 3.6.3
    WebLogic App Server 4.5.2
    (URL http://hostname:81/servlet/* will proxy-forward the request to
    weblogic 4.5.2)
    like http://hostname:81/servlet/newservlet -> to
    http://weblogicserver:7001/servlet/newservlet
    for the servlet, it is ok....
    but if I call http://hostname:81/servlet/newjsp.jsp , then there will be a
    404 Not Found error....
    My properties setting for jsp is
    weblogic.httpd.register.servlet/*.jsp=weblogic.servlet.JSPServlet
    weblogic.httpd.initArgs.servlet/*.jsp=\
    pageCheckSeconds=1,\
    packagePrefix=a.b.c.d,\
    compileCommand=/jdk1.2.2/bin/javac,\
    workingDir=/abs_path_to_a_newly_created_directory,\ (weblogic
    process has the write right to this directory)
    verbose=true
    weblogic.httpd.documentRoot=public_html/
    And have already place all the jsp into the public_html/ and even one more
    copy in public_html/servlet/
    but I still can't call the jsp....
    can anyone tell me how to fix it........
    THX
    Alex

    Are you able to call the JSP pages directly? Or, does it just not work when
    you are using the plug-in?
    Michael Girdley
    BEA Systems Inc
    "Alex Wong" <[email protected]> wrote in message
    news:[email protected]..
    Hi all,
    After I setup teh weblogic and write some jsp, I cannot call the jsp upfrom
    my URL thur a NES.
    My configuration is
    Web-server NES 3.6.3
    WebLogic App Server 4.5.2
    (URL http://hostname:81/servlet/* will proxy-forward the request to
    weblogic 4.5.2)
    like http://hostname:81/servlet/newservlet -> to
    http://weblogicserver:7001/servlet/newservlet
    for the servlet, it is ok....
    but if I call http://hostname:81/servlet/newjsp.jsp , then there will be a
    404 Not Found error....
    My properties setting for jsp is
    weblogic.httpd.register.servlet/*.jsp=weblogic.servlet.JSPServlet
    weblogic.httpd.initArgs.servlet/*.jsp=\
    pageCheckSeconds=1,\
    packagePrefix=a.b.c.d,\
    compileCommand=/jdk1.2.2/bin/javac,\
    workingDir=/abs_path_to_a_newly_created_directory,\ (weblogic
    process has the write right to this directory)
    verbose=true
    weblogic.httpd.documentRoot=public_html/
    And have already place all the jsp into the public_html/ and even onemore
    copy in public_html/servlet/
    but I still can't call the jsp....
    can anyone tell me how to fix it........
    THX
    Alex

  • How to setup Collaboration Server

    Hello,
    I found that Sun studio provides Collaboration tools that allow developers to share data. But problem is, how can I set up one? What should I write on the server? Thank you.

    I was trying to find the same information on how to setup the collaboration server and eventually found it hidden in the install notes
    http://docs.sun.com/source/817-7971/ide_setup.html#96139
    It depends on whether your on windows or solaris. For solaris you need to ; cd java-studio-install-dir/CollabRuntime/bin
    ./xmppd start It muttered about having to be run as root but that is probably just a permissions issue.
    HTH
    Matthew

  • How to setup database support Multipule Language

    I want to create a database can store Chinese and English data. Previously, I have tried to use UTF8 char. set but some unexpected Chinese character shown on the client side (Window 2000).
    Which character set I should choose and how to setup Server and Client character set/code page?
    null

    Check out
    http://otn.oracle.com/products/oracle8i/listing.htm#nls
    null

  • How to setup DMZ on Watchguard XMT 330

    Hi PCITech,there is nothing, that could be directly called a 'DMZ' as you find it on some low end routers.Instead you have network interfaces, that each may represent their own full blown network (if you set them up for that). By default WatchGuard allows you to select between 'trusted' and 'optional' for a new network, that you configure, but you can also select 'custom'. Later, when you write firewall rules, you can than reference 'Any-Trusted' and 'Any-Optional' in your rules. But sometimes you don't want a network to follow the rules, that you have in place for 'Any-Optional' and than you need to set that network as a 'Custom' network.If you want to make a server in one of these additional networks accessible by the outside world, you have to set up SNAT rules, that connect between an external interface IP/port and your internal...

    Hello,
     I'm either blind or over-worked (probably both) but I can't seem to find how to setup a DMZ on the XTM 330. I need to add an Avaya IP phone system and don't want to try using SIP because the vendor said they need no NAT.
    Can someone please either direct me to the correct spot in the documentation or tell me how to do it?
    Thanks in advance
    This topic first appeared in the Spiceworks Community

Maybe you are looking for