How to setup a vpn over the internet

Hi ,
how to setup a vpn over the internet ? Just I have using window server 2012 r2, I already install 'remote access service' also ready enable VPN service but I can't connect to vpn server over Internet(Other network), when I connect from LAN , vpn service
is enable I can connected. My ADSL router also Enable VPN access(PPTP, L2TP, IPsec). But I can't access my server over Internet :'( . What I need to do? Help me please.
Thanks,

Hiya,
Did you have a look at this guide? - It gives you all the steps.
http://www.howtogeek.com/135996/how-to-create-a-vpn-server-on-your-windows-computer-without-installing-any-software/

Similar Messages

This is how to wake your desktop over the internet via WRT54GS!

Assuming you've read how to configure the BIOS and Network adapter, this is what needs completed on the router. If you search this subject you'll discover a gazillion threads about failure. I tried hard for several weeks, only being able to wake it over my LAN, but never over the internet and then abandoned the whole idea months ago, but tried it again today with success. I had my brother in law test the configuration from 500 miles away - Indiana to PA. I Port Forwarded and Port Triggered to port 1649 but you can select a different port. I enabled Wireless Access and Remote Management in Administration. Months ago I believe I'd tried Port Triggering without the Administration settings and, with Administration settings enabled, without triggering. Now the most interesting thing is after the initial test I re-enabled the routers Firewall and I was still able to wake the PC. I also set up a rule in my software firewall to open port 1649. I'm not sure that is necessary, since in theory the pc and the firewall are off. Now my external IP is not static, however, it never, never, ever changes so all other settings were just default. One thread I read one time was a person could only wake the PC in the first 30 seconds after shutdown. I haven't tested that problem. I'm also going to retest Port Triggering without Wireless Access and/or Remote Management enabled. Give it a try and good luck!
I edit! So I just woke it up without Wireless Access and Remote Management enabled or the port open in the software firewall. I went through a VPN tunnel, however, not 100% sure that is a valid test. It would seem that triggering and not just forwarding maybe the key!
Message Edited by ratchet on 11-08-2008 11:01 PM
Message Edited by ratchet on 11-09-2008 04:27 AM

Hi Jasbryan,
If RV220W doesn't forward UDP to a broadcast address, could you ( i.e. Cisco) provide a tools for sending WOL Magic Packet to the LAN on Router Device Manager page?
I see many routers also provide this tools from their manager page.
Thanks.
Raymond

RV220W- How to setup SSLVPN for browsing the internet.

Hello all!
My question is the following: I have bought a RV220W router at home for my need to browse securely the internet with my laptop (Win 7 32bit) while at airports, internet cafes, WiFi hotspots, etc via SSLVPN. After many attempts and because I am not an experienced person in these matters, I have totally failed. Is there any step by step guide to follow?
Any help would very much appreciated!

Hiya,
Did you have a look at this guide? - It gives you all the steps.
http://www.howtogeek.com/135996/how-to-create-a-vpn-server-on-your-windows-computer-without-installing-any-software/

How to record streamed audio over the internet in iTunes?

One option is iRecordMusic:
http://www.bitcartel.com/irecordmusic/index.html
The problem is that you have to pay for it (USD 25). Any more cost-effective solutions?

WireTap Pro $19 (Probably the best)
Audio Hijack $16
Audio Hijack Pro $32
Radiotastic Free
other stuff
http://www.versiontracker.com/php/search.php?mode=basic&action=search&str=intern et+stream&plt%5B%5D=macosx

Saving an Image to an Oracle Database over the Internet

I would like to know how to transfer an image over the Internet and save that image to an Oracle Database. That is I am trying to make it so that a user can connect to the Internet and select an image file form their PC in TIFF, JPEG, or some other format. Next, I would like to save this image to an Oracle 7.3.4 Database in a LongRaw data type. This image will need to be save into a certain record in a table that I created. In the next few months we will be upgrading to Oracle 8 that uses Blob data type. Any one who knows how this can be done, please let me know.

Yes, that's right. Here is the pertinent code:
In the flax app:
private function captureImg(imgEnc:IImageEncoder):void {
var ohSnap:ImageSnapshot;ohSnap = ImageSnapshot.captureImage(img, 0, imgEnc);
textArea.text = ImageSnapshot.encodeImageAsBase64(ohSnap);
InsertImage(textArea.text);
In the HTTP service AS module:
private
function InsertImage(sImageCoded:String):void { var sQry:String;sQry =
"INSERT INTO image (lImageId, blbBitMap, txtImage, lRecipeId) " sQry +=
"VALUES(0, '" +sImageCoded +"', 'text', 23)"
//Alert.show(sQry);mysqlQuery(sQry,
"InsertImage");}
As mentioned previously, an HTTPrequest error is generated although I can enter
the string into the blob manually in MySQL.
Scott

Ard over the internet

How can I use ARD over the internet to access my home computer?

Come check out my tutorial on setting up Apple Remote Desktop over the internet! (Outside your local network)
http://www.youtube.com/watch?v=Ph8Cj3Jetac

Signaling over the internet

Can someone advise pls if signaling in an ITP setup be carried over the internet?

Hi!
I've used ITP for some purposes and it always used IP/SCTP for transport. Since IP is used over Internet, there should be no reason that ITP signalling could not be sent over internet.
Regards,
Ivan

Time Capsule - how to gain "over-the-internet" access from Windows 7!

Hi guys,
I've been fighting for such a long time with my Time Capsule. I have no idea how to gain access "over-the-internet" on a PC (Windows 7) which is running on another network. My Time Capsule is set up with my Macbook Pro at home running Lion OSX, and i have internet connection. My brother who also uses Macbook has no problems connecting to my Time Capsule - through finder (connect to a server). But how do I gain "over-the-internet" access to my Time Capsule through a PC (Windows 7) from my office? Is there please someone who can guide me step-by-step, how to gain connection to my TC through a PC? Or maybe just an explantaion what has to be done on the PC before this thing can work out! This was the main reason to why i bought Time Capsule - besides of the Time Machine function. I also have an iCloud account (earlier Mobile Me), if that makes any difference.
Thanks!

There is no way to do it from windows direct to the TC.
It only presents AFP to the WAN side. And most ISP block SMB from internet access due to risks. There is AFAIK, no suitable AFP protocol utility for windows at the moment. If you google and find one, be aware it probably will not work to your satisfaction anyway.
You must use a Mac to access AFP but even then it is not a secure protocol and I would recommend against it anyway.
So basically if you had have asked before purchasing, I would have said, TC is unsuitable product. It is a backup drive for a Mac. It is not a NAS.. it is not designed for remote access by any computer other than a Mac. It does not support any other file protocol to the WAN interface.. and no secure protocol even there.
A NAS with Time Machine extensions from QNAP, Synology, Netgear all are designed for web access and are far more suitable. Researching a purchase beforehand is always worthwhile.
Anyway, your choices are.. return the TC and buy something more suited to the job.
Or if return is now impossible sell the TC on ebay.. etc and do the same thing.. buy a more suitable NAS.
Or buy a cheap mac mini (even second hand) and use that for communications with home.
Or, replace your current router with something that includes vpn. This is actually a good and commercially sound decision. VPN is generally used by business to connect to remote locations, because it is secure and will allow the greatest flexibility of connection. How hard or easy depends on the current setup. I would recommend a combined modem router with vpn server if you have adsl. Or for cable you can find plenty of routers with combined vpn. You can also use those for adsl if your ISP allows pppoe with bridged modem. The TC will have to be bridged as well. For other broadband it might be harder to find the right kind of box.
Once you setup a vpn you can access it from work using the appropiate vpn client in your work computer.

How do I access my time capsule over the internet

How do I access my time capsule over the internet. I've already set it up to share over WAN, but I have ATT so my TC is connected to the router provided by ATT can I still access my TC via the internet even though its not directly connected to the Ethernet?

The TC should be in bridge mode.. not setup to share over wan.. that will never work. That is assuming you haven't bridged the ATT router.
Once you bridge the TC see if you can setup BTMM using icloud settings in the TC. As per the Apple docos.. here.
You should also be able to directly access the TC since you have a router with dyndns client at a guess.. the setup is simply forward port 548 to the TC.
Google search this.. there is huge number of resources available. eg
http://useranswer.com/answer/how-can-i-access-my-time-capsule-remotely-with-iclo ud/

How secure is USB disk file data over the Internet?

I have an Airport Extreme with an external USB drive attached. I can successfully connect to the drive both from the internal network (LAN) and from the Internet. I have secured my drive using user accounts granting either read-only or read-write access. When connecting from the Internet, how secure is the data when it is being transferred over the Internet between the USB drive and my remote device (Mac, iPhone, iPad, etc.)?

Thank you, Kappy. I sincerely appreciate your input.
It appears that the Airport Express "Share On WAN Port" is not really a secure connection. File data is not secure as it is transferred over the Internet, which is what I suspected. So, in order to secure the data one would need to establish a VPN (or equivalent) connection to the local network and then access the Airport Extreme disk data via the VPN connection. I should note that in this scenario the "Share On WAN Port" would not be needed and should probably be disabled. For me, a VPN connection is necessary unless I only want to store and share files and data that I don't mind others obtaining while in transmission.
This is what I expected, but was hoping for something along the lines of what Apple's Messages does, which encrypts data from end-to-end between two (or more) users in a conversation to ensure the data/content is secure.
Thanks again.

How do I use airport utillity with Time Capsule(or any airport extreme) over the internet without mobile me? iCloud has disabled this function?

How do I connect to my Airports/time capsules over the internet using the mobileme function under icloud?

i want to do the same. i tried entering my @me.com account and does not work, but if I tried to go to icloud.com and using my @me.com works
why?
does the Airport express needs to be upgraded as well

How can I download a file over the internet from a WebDAV server?

I am trying to download a file over the internet from a WebDAV server. I've tried doing it with Datasocket as suggested in these articles,
<a href="http://digital.ni.com/public.nsf/websearch/f3cc5f7e60a75cb2862567e700696abf?opendocument">Retrieving an Unformatted Text File via FTP or HTTP Using DataSocket</a>
<a href="http://digital.ni.com/public.nsf/websearch/4FA09E7B3674DA34C1256BD400555C41?OpenDocument">Download a Text File from a Password Protected URL Using DataSocket</a>
but all I get is error 1181 (protocol unrecognized by Datasocket).
I know I have the URL correct, because I can put it into a web browser and it works fine - I can download the file manually.
But I want to have a LabVIEW program do the download automatically.
I have the internet toolkit, but don't have the foggiest clue how to use it, and am using LabVIEW 7.1
I am a bit out of my depth here, so any advice welcome.
Regards,
Mark.

MIG,
What is the URL to the website? Is it an FTP site? The articles you referenced are for specific transfer protocols. If the stie you're trying to get to doesn't follow these protocols, then you'll get the error you're seeing. You may have to use ActiveX to control IE and download the files programmatically.
Chris C
Chris Cilino
National Instruments
LabVIEW Product Marketing Manager
Certified LabVIEW Architect

How do I control my airport extremes/time capsules w/airport utility over the internet without mobile me? iCloud has disabled this function.

How do I use airport utillity with Time Capsule(or any airport extreme) over the internet without mobile me? iCloud has disabled this function. The mac's that I have not upgraded to icloud still see my routers over the internet with mobile me enabled. Are these routers obsolete now or will there be a firmware update to use icloud?

i want to do the same. i tried entering my @me.com account and does not work, but if I tried to go to icloud.com and using my @me.com works
why?
does the Airport express needs to be upgraded as well

How do you view a friend's screen over the internet

how do you view a friend's screen over the internet, not on the same LAN?
for 10.8.x and 10.9.x?
thanks,
g.

Look at LogMeIn, GoToMyPC or any other 'remote access service'.
LogMeIn
GoToMyPC
Apple has 'Back to my Mac' which could work well, however it is tied into iCloud & frankly makes it a real pain handling passwords to set it up.
I think the Messages application can allow you to request that someone can control the Mac via 'screen sharing' too, but I haven't tried across different OS X versions.

How to Enable Wake On Lan over the Internet??

Hi, I am using RV220W with the latest firmware, I want to make "Wake on LAN" work for my NAS, I found the following description on Internet:
"If you wish to use Wake On Lan over the internet you will need to set up your destination firewall/router to allow "Subnet Directed Broadcasts". Most routers and firewalls disable this option by default.
You will then need to allow traffic through on your firewall/router on a specific port. The choice of ports is up to you."
So how can I enable "Subnet Directed Broadcasts" on RV220W??
Thanks.
Raymond

Hi Jasbryan,
If RV220W doesn't forward UDP to a broadcast address, could you ( i.e. Cisco) provide a tools for sending WOL Magic Packet to the LAN on Router Device Manager page?
I see many routers also provide this tools from their manager page.
Thanks.
Raymond

How to setup a vpn over the internet

Similar Messages

Maybe you are looking for