How to setup an artist mix (audio mixer) on final cut pro 7?

how to setup an artist mix (audio mixer) on final cut pro 7?

Hi Meatpuppet,
I'm having the same issue with not getting my audio through to the client on Ichat theater preveiew. I'm on a mac pro with a small DV camera attached via firewire. when I start the chat, the person on the other side sees and hears me fine, but then when I start sharing in FCP, the video switches so that the remote person sees the time line, but loses the audio from me and doesn't hear the audio from the time line...
The manual recommends "disconnecting and external video device" ( then what do us mac pro folks do?)
So my question for you, and I know that you're on and Apogee Duet, is: Was your tinkering in FCP, your system sound settings, or iChat? in other words, where was the disconnect?
thanks.

Similar Messages

How do I select just one audio channel in Final Cut Pro X?

I know this has been asked and answered somewehre... and I'm pretty sure the answer is simple. But I don't have hour's to search the net.
And the FCPX "Help" feature just ****** me off....
I recorded voice on channel 2 and shotgun nat.sound on channel 1.
I only want the voice track (channel 2) to playback in stereo.
I have already edited the video so I don't want to re-import the raw video to seperate out just the channel 2 voice track.
How do I select just one audio channel in the timeline, then pan it so it plays back in both the L and R channel?
Also, some of the audio was recorded with a air conditioner running in the background. Any suggestions on best audio filers to remove or lessen it?
Thanks, Barry

I think you want to select the clip in the Timeline, choose the Inspector and then Audio, dual mono.
You can even do this by selecting multiple clips.
In the Event Browser as well.

How do I import or export iLife music into Final Cut Pro 7. Thanks

How do I import or export iLife music into Final Cut Pro 7? Thanks.

Locate the .caf file you want to use in FCP in the Finder. Normally, iLife sound files will be in Macintosh HD/Library/Audio/Apple Loops/Apple/iLife Sound Effects/(subfolder).
Open the file on SoundTrack Pro, the go to File->Save a Copy As. In the Save As window that will open, navigate to where you want to save the file, then near the bottom of that window, use the drop-down File Format menu to choose AIFF. Set the bit depth to 16-Bit Integer and the Sampling Rate to 48000 hz.
Import the resulting AIFF file into your FCP project.
-DH

Using Tascam US-122mk11 as audio interface in Final Cut Pro 7

Using Tascam US-122mk11 as audio interface in Final Cut Pro 7. Works fine with Garage Band. Final Cut Pro won't use it. It appears in source menu in Voice Over Tools, but FCP won't use it.

This is the Final Cut Pro X forum. You are using a very different application. The Final Cut Studio forum, which is for the application you're using, is here:
https://discussions.apple.com/community/professional_applications/final_cut_stud io
Give exact details of your media and sequence settings. It would also be good to know what kind of drive you're using and how it's connected.

How do I swap one clip for another in Final Cut Pro 7?

How do I sway one clip for another in Final Cut Pro 7? I am doing what it says in a book but it is not working. Thanks.

You drag the clip from the browser to the clip on the timeline. Wait till the timeline clip goes white. Drop it and pick from the menu that appears the replace option you want.

How Do I Open a Motion (5) Project in Final Cut Pro X?

How Do I Open a Motion (5) Project in Final Cut Pro X?

You can't directly. You can either export a file, or you can save it as a template, effect, title, transition, or generator, that can be used in FCP.

How do I do the annoying orange effect in Final Cut Pro X?

I cant find any tuturials on how to do this on the new version of Final Cut Pro.

You might get a more knowledgeable answer if you post in the actual Pro Applications forums - the FCP users hang out there:
https://discussions.apple.com/community/professional_applications

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

When starting Final Cut Pro 7.0.3 I am all of a sudden getting a message that says "One or more of the scratch disks don't have read/ write access" and now the app won't operate - how do I fix this so I can use Final Cut Pro?

Glad you found the answer. But something seems wrong. FCP should be able to assign the scratch disk to your startup drive. It's not advisable, but it should be possible. You might want to try and figure out what's going on before what ever's going on cause other problems.

How do I order vouchers for Certification Exams for Final Cut Pro?

how do I order vouchers for Certification Exams for Final Cut Pro? This is for an Educational Institution.
Thanks,
Rufus Chaney

I am at the district office of a school district. One of our high schools is an Apple Authorized Training Center with a Certified Instructor. The instructor is asking for vouchers for his students in order to complete he exams. We would also like to like to make them available to oher schools within the district.

How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

How do you import a .png file into the Final Cut Pro X and at the same time keep the file's original transparency settings?

Go to the Info inspector for the still image and in settings select the alpha type.

Apple Audio Filters in Final Cut Pro

I'm posting this question here because I didn't receive any responses in the Final Cut Pro message area, and I thought given the nature of the questions, audiofiles that read this area might have an answer.
In Final Cut Pro there are two folders of audio filters, one called APPLE and the other FINAL CUT PRO.
I fully realize none of these filters have the power of programs like SOUNDTRACK PRO.
However, I'm in a situation where I need to document what the filters do. I've already found all the material I need for the FINAL CUT PRO filters. However, I can't find any information anywhere on the APPLE category of filters.
My questions:
#1 - Does anybody know why the APPLE audio filters are seperated out from the Final Cut Pro filters? How are they different generally?
#2 - Does anybody know where I can find documentation on what each of the APPLE category of audio filters do? I can't find it in the Final Cut Pro Manuals or Diane Weyland books. I found some Ken Stone tutorials on line, but they don't address the APPLE filters.
#3 - And many of the APPLE audio filters seem to be near duplicates in the Final Cut Pro audio filters, so what's the point in having two versions?
Any info at all or a direction to look would be appreciated.
Thanks so much.
Message was edited by: brvideo

As of Leopard I was surprised to find that the Apple system plug-ins, and those that are supplied with the FCP suite are not AU plug-ins in the old sense of what a plug-in used to be. They no longer exist as a file anywhere in the system as they used to. Audio Unit plug ins formerly used to exist in Library/Audio/Plug ins/Components - now they are build into the Leopard operating system.
Any third party plug-in you purchase will still be installed in the "old" way.
Sorry, I can't remember where that documentation exists. Probably in the developer docs somewhere.

The sample audio files in Final Cut Pro X will not play

How can I hear the sample audio in Final Cut Pro X without dragging the clips onto the timeline. They used to play, but stopped after the computers were connected to Tenaka.

The only way to test it is to go to Network system prefrences and switch off all connections to networking. There are no plugins for FCP that are used for network connections.

How do I get copyright or license to show Final Cut Pro in use by a character in a film?

Hi,
I am working in a Film Production team in Brazil. We are producing a film where the main character is a film editor and he uses Apple Final Cut Pro at his work.
The film is for all ages - no restriction.
I have already written to "Copyright Permissions" but had no answer since June!
Do I need a copyright license for that?
And if I do, how do I get it from Apple?
Thank you in advance.
Sil

I am working in a Film Production team in Brazil. We are producing a film where the main character is a film editor and he uses Apple Final Cut Pro at his work.
The film is for all ages - no restriction.
I have already written to "Copyright Permissions" but had no answer since June!
Do I need a copyright license for that?
I am not a lawyer, but I don't see how you are infringing on Apple. Remember, most e-mails are not read or replied to. Your best course of action would be to send a priority letter to Apple's street address. They still may not reply, but it will be read.
A test that usually (but not always) works. Is your activity costing the other party money. Is your activity resulting in the other party losing sales.
If your movie is showing some guy at a desk using a companies software; it's beyond my comprehension why they would have a problem. In fact, many companies pay for “product placement”. However, I understand that Apple does not engage in this practice.
But I can assure you, every time you see someone with a Coke (and other products) in a movie the producers were probably paid.
http://en.wikipedia.org/wiki/Product_placement

How do I preset a title text style in Final Cut Pro X?

I want to use the same title stye again and again in Final Cut Pro X - font size, style, color.
Final Cut Pro is happy to have me "Save a Preset to Library", but then I never see it again. When I go to the dropdown menu, all I get is Apple's list of truly hideous fonts like 80s, Aqua Fade, Candy, etc.
I save my favorite style as "Basic" and that does nothing either - as soon as I add a new title and apply the "Basic" setting I get Apple's horrible Gil Sans again. What's going on?
Any tips on how to perform what should be a very simple operation? Have spent more than an hour on this now.

Well, Tom, I guess I'm just not as fortunate. Anyone else have any suggestions?

How to Free up Disk Space to export from Final Cut Pro to QuickTime?

I am using Final Cut Pro on a Mac OX10. When I try to export a Final Cut Pro project to QuickTime I get a message saying that I do not have enough disk space available. How do I free up additional disk space? (I am a little confused because I have already deleted more disk space than I am current trying to use)
Powerbook G4 Mac OS X (10.4.7)
Mac OS X (10.4.7)
Mac OS X (10.4.7)

Might try restarting the computer, just to refresh the system's memory... be sure you empty the trash too... the new space won't show up until you do.
Jerry

TS1233 How do I get chapter markers for iDVD from Final Cut Pro X?

It seems like a tremendous short-coming that Final Cut Pro X doesn't allow for chapter markers that can be used in iDVD or DVD Pro. Surely there is some way to get used-defined markers from Final Cut Pro X or at least re-define the Final Cut Pro X markers in the DVD authoring applications. Does anyone know how to do this?

I have decided to say that my problem is solved by the work-a-rounds that have been submitted. I STILL don't like the fact tha Apple has decided that DVD's are a thing of the past and therefore (chapter) markers are of no use. That may be true is the publishing world of YouTube, Vimeo, etc. but it certainly NOT true for many of us advanced hobbyists that still like distribution on DVD's to our friends or a more localized (private) community -- especially to those who are not computer literate. If Apple wants to exclude us from their customer base, I suggest that base will become even smaller than their competitors who still have chapter markers in their products. I'll get off my soapbox now. . .

How to setup an artist mix (audio mixer) on final cut pro 7?

Similar Messages

Maybe you are looking for