How to setup and run CD Recovery?

For HP Pavillion DV9925nr Laptop, I replaced a new Hard-Drive and installed the first CD Recovery (purchased online). After one minus installing the CD Recovery, it shows Errors message: "Error 0x4001100200000100A, If this error, contact HP" What can I do? Need help!

Hi
Once unit is powered on keep tapping F10 Key go to Diagnostics run the Hard drive test and check it this passes.
Use the following steps to recover the computer from a set of recovery discs (either CDs or DVDs):
Disconnect and remove all external devices such as printers, USB drives, and memory cards.
Turn on the computer, if it is not already on, and insert the first recovery disc labeled #1.
After the first disc is in the drive and the drive is closed, turn off the computer by pressing and holding the Power button.
Turn on the computer. The computer opens the Recovery Manager program.
On the System recovery screen, select Run program from disc , and then click Next . A Welcome to Recovery Manager screen opens.
On the Welcome to Recovery Manager screen, click Next .
On the Microsoft System Restore screen, select No , and then click Next .
Another System recovery screen opens. Select Yes , and then click Next .
The Recovery Manager gives you the option of backing up your data files. To do so, readBacking up your files .
If you do not want to backup your files, select Recover without backing up your files , and then click Next .
Read and respond to the screens as they appear. If a screen prompts for a disc, insert the next disc. In some cases, you may have to repeatedly insert the same disc several times before the screen allows you to continue.
After the System Recovery is complete, the computer restarts and continues into Windows setup. Complete the setup screens and wait until the computer finishes the setup. Then, turn off the computer, reconnect all peripheral devices, and turn on the computer.
Before using the computer, update and protect your computer. Reinstall any virus and security software that was installed before the System Recovery.
Reinstall any software applications that were after purchasing the computer, and any files that were backed up.
If all off these does not work please call HP technical support and order the new recovery disc.
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

How to setup and run Oracle Report server 10g !

Hello everybody,
I have installed the Reports Server as a service on a Windows machine ( my OS is Window server 2003).
I created a new reports server service as following (in Command Prompt):
c:\ rwserver -install repserver autostart=yes
but not working and notified ' Please consult the installation guides for how to set up and run this program'
Has anyone showed me 'the syntax rwserver.exe' to install this service.
Please help me!
Thanks you very much,
Tran Le

Hello,
Thank you for help me very much. I use 10g(10.1.2)
After I do to follow the configuration on web but not working.
Can you show me more clearly than ?
Sorry to bother you,
Tran Le

How to setup and run JSP project in BEA Weblogic

i am trying to run my JSP project located in c:\project. i am actually running it in Tomcat webserver, this time i wanna test it in bea weblogic server, i have downloaded a version 8.1, before purchasing the software for development use, i wanna know and test first BEA's integrity and use... my question is how can i set up the base document path that i have in tomcat in bea, so i can just point it to such directory and run it directly using port 7001 for bea weblogic server..
can anybody help me get tru it step-by-step??
help please...

Jason Combras napisa?(a):
how can i set up the base document path that i have in tomcat in bea, so i can just point it to such directory and run it directly using port 7001 for bea weblogic server..
can anybody help me get tru it step-by-step??
help please...Jason,
Simplest way "in my opinion":
1. start weblogic Server. You can use Server with examples. This domain
is already configured, so You will not need any domain configuration tasks.
2. open weblogic administration console using browser
http://localhost:7001/console/. Log in.
3. On the left side choose Deployments -> Web Application Modules
4. Click "Deploy a new Web Application Module"
5. Find folder with Your application. Mark it and click Target Module.
6. Define Application name and click Deploy
7. If deployed successfully, Your application should be accessible at
http://localhost:7001/YourApplicationContextRoot
Best Regards,
KArol Muszynski

Got new miniMac servers with 2x750GB drives. How to setup and confirm RAID mirror?

Literally just got shiny new miniMac Server with the dual 70GB internakky hard drives/disks with
OS X 10.7.$ LION pre-installed. What a nice machine in a super cool box!
Seemed to bootup and run fine!
Now my issue (there will be more for this MAC newbie):
A. How to setup AND more importantly (item B below) CONFIRM that a RAID MIRROR is working?
Want nothing fancier than 2-nd drive is exact duplicate of 1-st drive at all times.
That is, an 'active and full up-to -the second" backup of the main 1-st drive.
I have done nothing to 1-st drive as it came from APPLE.
When I try to setup RAID set using DISK Utility, I get message about system(1-st drive) can't be used in a RAID or such.
yet I can add 2-nd drive to what I tink is a RAID set and then 'Enable' it.
It seems to add another entry to thr left-side of drves list panel but not sure that 1-st and 2-nd drives are BOTH in the new
"RAID SET' or that the set just consists of the "single" 2-nd disk?
B. I don't think that 1-st drive data is actually being duplicated to 2-nd drive.
For instance, how do I know that it was 'caught up' to match 1-st drive AND then is
staying caught up?
C. A 'RAID UTILITY' Icon brings up a not-available message, but I think that is because I don't
have HARDWARE RAID controller, just software RAID, correct?
D. What is 'Time Machine' and how does it play into this? I do assume that somehow/someway I need to
have off-machine backups also to be truly protected? How would a 2-nd identical miniMAC server be best
deployed to back each other up, in addition to their own internal RAID-ed disks that items above address?
My whole point of buying 2x750GB disks was to have mirror RAID set and
(foolishly) assumed that factory would set it up that way.
Please help me get setup right so when the inevitable crash happens,
I have some chance of recovering from it.
Regards,
Paul T
emai: [email protected]
Apple ID: N3UD
Phone: 610-613-0610

A. What are you adding to the RAID: a partition or a hard drive? You can only add hard drives to a RAID. RAID Utility should confirm that your RAID is working
B. No, I don't think so
C. It's because you haven't got RAID hardware.
D. Time Machine is a backup system in external drives. If you want, you can do backups in a external hard drive.

How to deploy and run EJB in eclipse without XDoclet

Hi Friends
I am new in j2ee.In my academic project i want to do some ejb programming.
For that purpose i want to write some ejb's.I have written all required class for ejb,created ejb-jar.xml file manually,weblogic .xml file manually. I am using weblogic8 as an server for deployment.
I know deployment with xdoclet but i want to know hoe to deploy ejb without xdoclet.
If u have saple code or useful link regarding this please send it as soon as possible.
Thanks in advance
How to deploy and run EJB in eclipse without XDoclet

HI Welcome to J2ee...
I am also new to this...But i ll share my ideas with you...
In EJB 3.0 No need of any Deployment Descriptors....
And If you are using Eclipse You can Deploy(as jar) using Export in File tab...
XDoclet is not mandatory...
Gopal V

I have downloaded Firefox 5.0 at least three times and saved file, but I don't know how to install and run. It keeps asking me to download new version and Save file. I'm in a never ending loop, it keeps downloading same exe & does not install Please Help

Please tell me how to install and run new Firefox 5.00 after I have downloaded the new version and chosen Save File. I just go into Loop and screen says new version available and download again !

Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Where can I find info on how to install and run Snow Leopard Server as virtual machine inside Mountain Lion

Here is the short answer:
Installing Snow Leopard Server into Parallels 10 for DUMMIES:
http://forums.macrumors.com/showpost.php?p=17285039&postcount=564

How to setup and use Passbook on iPhone 4?

How to setup and use Passbook on iPhone 4?

So your saying you can only copy part of this text?

How to compile and run java files on a mac using command line?

can someone tell me or link me to some article on how to compile and run java files from command line on a mac? I have mac OS X leopard

What do you mean by "where to put them" ? What do you want to put anywhere ?
Have you read Peter's comment in brackets ? Perhaps you have a classpath problem ?
Edited by: Michael_Knight on Aug 31, 2008 4:23 AM

How to compile and run package programs in Java

Hi,
I want to know how to compile and run the package programs in Java using -d. instead of creating the package folder manually.
eg:
package Test;
class test1
public void disp()
//Any code;
I want to compile this without creating the folder ' Test ' manually. that is if we use -d with javac the Test folder will be created automatically. I need the format of -d
could anyone please help me.
Thanks in Advance ,
Ambika

My program Test.java in F:\Tomcat5\webapps\Ambika\WEB-INF\Classes. I compiled in the format below. I got like this. What should I do for this? But yesterday I compiled like this only, It compiled and the folder com\cert\Test.class is created. Today again I compiled the pgm after deleting the already created folder 'com\cert', I got the error like this.
I've given my pgm and the thing I've got when I compiled it.
Test.java
package com.cert;
public class Test
public void display()
System.out.println("Hai");
F:\Tomcat5\webapps\Ambika\WEB-INF\Classes>javac -d F:\Tomcat5\webapps\Ambika\WEB-INF\Classes\Test.java
javac: no source files
Usage: javac <options> <source files>
where possible options include:
-g Generate all debugging info
-g:none Generate no debugging info
-g:{lines,vars,source} Generate only some debugging info
-nowarn Generate no warnings
-verbose Output messages about what the compiler is doing
-deprecation Output source locations where deprecated APIs are u
sed
-classpath <path> Specify where to find user class files
-cp <path> Specify where to find user class files
-sourcepath <path> Specify where to find input source files
-bootclasspath <path> Override location of bootstrap class files
-extdirs <dirs> Override location of installed extensions
-endorseddirs <dirs> Override location of endorsed standards path
-d <directory> Specify where to place generated class files
-encoding <encoding> Specify character encoding used by source files
-source <release> Provide source compatibility with specified release
-target <release> Generate class files for specific VM version
-version Version information
-help Print a synopsis of standard options
-X Print a synopsis of nonstandard options
-J<flag> Pass <flag> directly to the runtime system
F:\Tomcat5\webapps\Ambika\WEB-INF\Classes>
Plz help me.
thanks in advance
Ambika

How to compile and run a .java file from another java program

hello,
can any one tell me how to compile and run a *.java* file from another java program which is not in same directory?

Well a smarter way of implementing this is by using a solution provided by Java Itself.
If you are using J2SE 6.0+ there is an in built solution provided along with JDK itself and inorder to go ahead with solution the below are set of API which you;d be using it for compiling Java Programs (Files)
http://java.sun.com/javase/6/docs/api/javax/tools/package-summary.html
How do i do that ??
Check out the below articles which would help you of how to do that
http://www.ibm.com/developerworks/java/library/j-jcomp/index.html
http://www.javabeat.net/javabeat/java6/articles/java_6_0_compiler_api_1.php
http://books.google.com/books?id=WVbpv8SQpkEC&pg=PA155&lpg=PA155&dq=%22javax+tools%22+compiling+java+file&source=web&ots=XOt0siYe-f&sig=HH27ovuwvJgklIf8omTykUmy-eM
Now once we are done with compilation.In order to run a Specific class all you ought to do is create an object and its specific methods of a specified class included in the CLASSPATH which you can manage it easily by usage little bit reflections.
Hope that might help :)
REGARDS,
RaHuL

How to import and run little movies made on my primarily still camera?

Camera: Sony DSC-N2
Makes besides photo's (jpeg) also mpeg movies (mov)
Could somebody tell me how to import and run them on my iPad2 ?

Hello,
If you want to import them into your iPad without using iTunes you can get an Apple iPad Camera Connection Kit. Otherwise you can first import them into your computer then from your computer to your iPad using iTunes. Once they are on your iPad you can run them from the Videos app on your iPad.

How to attach and run std payslip available through tcode HRFORMS

Hi all,
Need to have much data along with graphics on the payslip. This includes Leave data(days paid, LOP, Payroll days, etc.), gross salary break-up, Year-to-date details, Tax details(line items), Standard Salary components, company logo, custom messages, etc. on the payslip. We are running India Payroll on SAP 4.7.
<b>Wanted to know how to attach and run standard payslip available with tcode HRFORMS in place of the one we have with tcode PE51?</b>
Your help will be <u>gratefully appreciated and rewarded</u>.
Thanks in advance

can u tell me how u manage to do this

How to modify and Run Dashboards

Hi Friends,
As per the requirement I have to do small modifications and run dashboards , I never work with dashboards.
Kindly suggest me how to modify and run dashboards
Regards
Anjali

Hi Anjali,
We can definitely create dashboards using WAD. We are so involved with BO now a days that I forgot about this option :).
Anyways, there is an article which gives a lot of ideas regarding how we proceed using WAD to create dashboard -
[http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/60af3f6c-8501-2c10-57bc-e11d9f6d69b6?QuickLink=index&overridelayout=true]
Hope this helps.
Regards,
RahulM

How to compile and run java program at command console

hi there
can anyone tell me how to compile and run a java program at command console? I have installed JRE 1.3.1, and also have installed JBuilder 5 if it helps.

try this
System.out.println("Enter your Name : ");
BufferedReader console = new BufferedReader( new InputStreamReader( System.in ) );
String s = console.readLine();
System.out.println("Hello : "+ s+" !" );

How to setup and run CD Recovery?

Similar Messages

Maybe you are looking for