How to setup antispam correctly?

I set anti-spam to true and do not fill in any of the rejectdomains, rejectsenders or rejectrecipients.
when i use telent <ip> 25 to connect the smtp_in serivice
it's failed.
550 5.7.1 Spam check failed for your IP address
If I set anitspam to false.It's all ok.
why?
And how to setup antispam correctly?

I have struggled somewhat with the antispam settings, and find it a little confusing. Raffa is right when it comes to reverse DNS lookup. Reverse DNS must be configured by the originating ISP (where the physical connection goes), and has nothing to do with the "normal" DNS set up administered by the registrar for the domain name.
This is possible when you know what network the user connects from. I find this to be a problem for users whith å portable PC connecting from different locations (home/office/travel), as normal user identification fails with the "Spam check failed for your IP address" error message.
Has anyone successfully set up an OCS SMTP_IN that correctly allows users to send mail through this SMTP with the SPAM-check enabled? The documents in Metalink does not address my problem, as far as I can see.

Similar Messages

How to setup DNS correctly

Dear all,
I'm trying to setup my first macmini-server correctly so that i can access files and ical chances of my coworkers when I'm on the road. After reading many posting I now it is important to set up the DNS correctly, as many things depend on this.
Still I get this messages in the "Next Step"-pdf after the installation:
http://dl.dropbox.com/u/427417/dns%20configruation.jpg
This is my DNS-setup:
- I have one static IP: 80.xxx.xxx.222
- I made a A-Typ entry at my Domain-Registrar: miniserver.example.com => 80.xxx.xxx.222
- My ISP made a PTR Entry in his DNS-Servers: 80.xxx.xxx.222 => miniserver.example.com
Both are working when I test it with: http://www.mxtoolbox.com/
And this is my hardware-setup:
Modem => linksys 160N-Router with public IP 80.xxx.xxx.222 =>switch => 4 Macs and my macminiserver with a fixed internal IP (192.168.1.133 made with DHCP-Reservation on the Linksys Router). FTP-Portforwarding to 192.168.1.133
What confuses me is the fact, that I can turn on FTP on the miniserver and access it from outside with a ftp-client using "miniserver.example.com" as the server name. For me this working FTP-connection looks like I have setup the Public IP/DNS things right? But why I still get the is message in "next Step"
I'm glad about any reply which helps me to understand the this.
Dietmar
Message was edited by: dietmar
Message was edited by: dietmar

Dear MrHoffman
Thank you for your answer. It looks like in your answer is everything I need to now. But as I'm not a professional I only understand your recommendations partially. Here are my thoughts about it:
MrHoffman wrote:
You'll usually want an external static IP and an external DNS domain that gets you to your firewall device, and then you implement a VPN at the firewall to connect to your LAN. The external DNS is (or static IP) is how you get connected to your firewall.
I do have a external static IP: 80.xxx.xxx.222 and DNS domain: miniserver.example.com which both gets me to my firewall (within the linksys router). So I think I've got this part right?
Within your LAN, here's [getting DNS going|http://labs.hoffmanlabs.com/node/1436]; but that's LAN-local stuff and useful for getting around once you have the VPN connected. You probably don't want to be serving public DNS; leave that to your ISP.
And yes, Mac OS X Server does really want to have DNS for itself either running locally on the box or within other DNS server(s) in your environment, and that usually then gets extended to running DNS for the rest of your LAN.
Setting up DNS on the Macmini Server for my local LAN will be my next task, but as this would be a to long post I would like to ask you in a extra post about this. As I understand from your answer, I do server public DNS at the moment, also I did not intend this !!!
I generally encourage using an [external firewall-based VPN|http://labs.hoffmanlabs.com/node/275], as that approach simplifies the requirements here and particularly when you're using NAT as is typical. You VPN to the firewall, then the connection works like you're on the LAN.
My linksys router supports VPN-Passthrough and server-admin has the VPN-Service. Will this two do what you are recommanding me. I know I have to read into VPN first, before digging questions into others.
[ftp is nasty|http://labs.hoffmanlabs.com/node/530] in several dimensions (your credentials are exposed in cleartext, and it requires a fancy firewall or the ephemeral port range to be opened on one of the intervening firewall), and usually best avoided during debugging. ftp is older than the internet, and largely incompatible with firewalls. VPNs or sftp is usually a better approach (and because you can use certificates or such, you can reduce your exposure to brute-force password attacks or password sniffing), save for anonymous ftp access or file drops, and only get around to setting up ftp once you get the rest of your network working here.
FTP was only for testing, as I thought it is a simple way to test access to my server.
As for your confusion, in your zone-level settings, you have the name server referring to the name server itself as its forwarding entries; this definitely won't work. Look at my notes and specifically look for the details on setting up the forwarding entry for the zone. This is the zone-level display (your http://dl.dropbox.com/u/427417/dns1.png) and the nameserver: field. That needs to be your upstream DNS provider.
As written before, Local-DNS is the next thing to do/learn for me. But I have to leave for now to support a friend with his Mac thank you for your answers
Dietmar
here are my screenshot when setting up the mac osx server:
http://dl.dropbox.com/u/427417/networkname.jpg
http://dl.dropbox.com/u/427417/Hostname.jpg
Did I made something wrong here?
Is the field "Primary DNS Name" for local or public DNS ?? I thought it is for public: miniserver.example.com

How to setup iMessage correctly to avoid double replys

Hi there.
I have just installed Mountain Lion on my macbook air. I also have an iPhone.
I now have connected my account with iMessage on the macbook.
I am using the same account on my iPhone. So far so good.
I then start a chat in iMessage from my macbook. As sson as I get a reply from the
person I am chatting with I receive 2 replys. One in the iMessage center on the macbook
and at the same time I am receiving the same message on my iPhone.
That is pretty annoying. Is ther a way how I can get rid of this problem?
Looking forward to your answers.
BR
Gerhard

I'll describe how it works for me.
I have two email addresses assigned to each device (except the iPhone 4s as it also has a phone #). One is device specific and one is group specific.
Sending to group from any of the devices will cause the sent message to appear on all devices. If the responding device has 'group' as its caller ID then responses to it from the original sender will also go to all devices. If the caller ID of the responding device is specific to that device then replies to the responding device from the original sender will go only to that specific device.
So, if you wish all devices to be able to participate in all conversations then the caller ID of all devices must be set to the group email. If you wish to use the group address to send to all devices initially but want to continue the conversation with only the responding device then the responding device must have a device specific email as its caller ID.
IOW all devices with an email address that is 'sent to' will receive the transmission. A responding device responds only to the caller ID of the sending device.
This is exactly how I expect it to work and exactly how it works for all of my devices. In Messages for iMac and iPad one can easily see this as the caller ID of the responding device is displayed. It isn't so simple on the iPhone for if the caller ID of the responding device is not the same as the address originally sent to then a new conversation is started and one must physically switch to that conversation to continue.

How to setup poolman correctly?

i have problem in setting up poolman correctly while put the poolman.jar, jdbc2_0-stdext.jar, jta.jar,xerces.jar on
web-inf/lib and poolman.xml;
but it seemly can't work fine!
what step do i miss?
thanks in advice,

I have trouble too..
can you tell the error message...

How to setup more than one repository

Is there a way to setup more than one repository ?
I've installed BI EE Plus for Linux and it should be used by two different BI teams starting from next month.
Since today one BI team develop their own repository (under windows) and give it to me; then I usually copy that rpd file under $ORACLE_BI_HOME/server/Repository directory.
Next month I will receive two repository files... but I don't know how to show the correct one to the appropriate team or at least let them select their own.
Moreover I didn't find a post where someone create a script to accomplish this requirement or something like this...
Could you help me, please ?
Thanks,
Marco

Working with multiple repositories is fairly straight forward.
See:
OBIEE+ How do I work with multiple repositories
The difficulty arises with multiple Presentation Servers, this can be done and there are various blogs on the subject if you google.

How to setup a PAC proxy on the playbook ?

Anyone know how to setup a PAC proxy on the playbook ? Thx

AGirl71985 wrote:
Hi
I have been trying to setup the mobile hotspot on my phone and haven't been able to find any instructions on how to do this. If anyone can tell me how it would be greatly appreciated. Thanks!
Amanda
Ha Amanda! First, you'll want to make sure your line has been provisioned for Mobile Hotspot service. You can add the feature to allow you to share up to 2 GB of data for 5 other devices for $20.00 per month. Once that is confirmed, please follow these steps to set up your device's mobile hotspot:
Settings> Wireless & Networks> Tethering & Portable hotspot> Portable Wi-Fi hotspot settings> check mark next to Portable Wi-Fi hotspot. This will disable all other data access so that the data usage is allocated correctly. When finished using your Xperia Play as a hotspot, remove the check mark from Portable Wi-Fi hotspot.

How to setup a canon ip2600 printer without the cd?

how to setup a canon ip2600 printer without the cd?
Solved!
Go to Solution.

Hi Santana,
The drivers for the PIXMA iP2600 can be downloaded from the Canon USA website. The following link will take you to the initial download page for your PIXMA iP2600:
PIXMA iP2600 Drivers and Software page
Once on the initial download page for your model, please do the following:
1. Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
2. Next, please click on the red arrow next to the "DRIVERS" section and click the printer driver file. When you do, another page will appear giving details of the file you are about to download will appear.
3. Please scroll down on the Details page and agree to the terms of the disclaimer message to continue with the download process by clicking on the "I AGREE - BEGIN DOWNLOAD" button. After clicking the "I AGREE - BEGIN DOWNLOAD" button, follow the instructions to download and install the driver. The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded.
Hope this helps!
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to setup the raw devices permissions permanantly in 11gr2 on RHEL 5.

Hi All,
Succesfully installed 11gr2 RAC and working fine , but in next boot raw devices permissions revert back to root .
Please advice me to how to setup permissions permanantly as the oracle user.
Regards
San
.

you find the lib on this page:
http://www.oracle.com/technetwork/topics/linux/downloads/rhel5-084877.html
in the AMD64 / Intel em64t Architecture table
this is the direct link
http://oss.oracle.com/projects/oracleasm/dist/files/RPMS/rhel5/amd64/2.0.5/2.6.18-194.el5/oracleasm-2.6.18-194.el5xen-2.0.5-1.el5.x86_64.rpm
hth
p.s. don't forget to mark question as helpful/correct and close the question.

How to setup the clock to the second.

How to setup the clock to the second. I'm able to setup hours and minutes correctly but not the seconds precisely. Can I synchronize with an atomic clock?

Set whether iPhone sets the date and time automatically
Choose General > Date & Time and turn Set Automatically on or off.
If iPhone is set to update the time automatically, it gets the correct time over the cell network, and updates it for the time zone you're in.
from: http://support.apple.com/kb/TA38641

How to setup a Seamless Transaction Gateway with PayPal (Australia Only)

I've been working with the team at PayPal to allow BC Partners to set up a cost effective way to setup a Seamless Transaction Shopping Cart Process on their BC eCommerce website without the need for a 3rd Party Merchant Provider like eWay or Secure Pay or their bank. This is designed for entry level businesses who want to control their setup costs and keep all funds in one place (PayPal).
Currently BC doesn't support Paypal's Payments Pro plan in Australia so you are limited with either a non-seamless payment process or using a 3rd Party Merchant provider with can be costly.
Without going into too much detail, the setup on PayPal's side is a mixture of a couple of plans, and is a little complicated however through our discussions we come to an arrangement of any additional fee's associated with the setup being waived since this is more so of a technical workaround than anything else.
Basically PayPal is the merchant provider, and the customer doesn't leave your website when making a purchase through the Shopping Cart. The setup is only $25/month plus transaction fees of between 1.1 to 2.4% + 30 cents depending on the number of payments (this is just an initial guide and confirmed on your discussion with the PayPal).
Because the setup involves quite a few steps and departments I've arranged a contact that will fast track this process and is familiar with this unique setup.
How to setup PayPal for a Seamless Transaction Process
Sign up for PayPal Business account Timeframe: <20 minutes
Email Peter [email protected] or phone (02) 8288 0333. CC me [email protected] or mention my name so he can correctly setup the process and apply the discounted pricing.
Prepare for the Verification process for the PayPal account (Proof of ID, Proof of Address, Business documents etc).
Wait for Account Verification. You will be informed to setup both PayFlow Pro* and Website Payments Pro (*the PayFlow payment will be waived as mentioned previously). Timeframe: up to 5 business days depending on swift supply of required documentation.
Wait for your Billing Agreement for Website Payments Pro once application has been approved. Sometimes they will receive a phone call to verify details of the application. Timeframe: Up to 72 hours
Login into your PayPal account to accept the Billing Agreement.
Notify Peter once the Billing Agreement has been accepted so your PayFlow Pro can be linked to your Website Payments Pro
Login into your Business Catalyst Website and navigate e-Commerce > Payment Gateways
Select PayPal PayFlow Payment Gateway (..,AU, ..)
Enter your Username, PayPal Password, and add VSA as the Partner
Setting up PayPal Payments
If you also want to make payments via PayPal (ie, with the customers Pay Pal account) you can continue with setting up the PayPal Website Standard secure with your PayPal Customer ID and your PDT Token which you'll need to setup in your PayPal Account.
If you have any questions give me or Peter an email. I'll continue to update this document as I go.
Please note this setup is current for Australian Pay Pal Customers only. This process does not support re-occurring billing.

Dennis, sounds like you are having issues connecting to your network. Here is what we are going to do.
On your first question, and second question for that matter, I would suggest using a WPA password. Our printers doe not associate with the other types as well as WPA. You should be able to do that, though I have not personally set up a router that way to have experience in how it will react with the networked devices. As for the issues you are having, once the settings are all in the correct order I am going to suggest we connect the printer to the network through the computer.
What you will do is install the printer using a USB connection, then re-run the setup software. Here there should be an option for USB to Wireless. This will be the easiest way to be sure that all the settings are correctly transferred over.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=303770
You can find the software in the link above.
Let me know if this helps!

How to setup the fax function for a AOI device

I read in several post on this forum that people get full print/scan/FAX functionality for the supported printers.
In my case, I have a HP Photosmart C7280, which is full supported using the C7200 series drivers, including a FAX driver.
Now, I add a printer in the 'Print & Fax' panel, and right away my printer shows up for bonjour. It finds automatically the correct driver, and works like a charm for printing and scanning, but... No Faxing whatsoever. Also no 'second' printer shows up, with 'kind' HP Fax, as several posts sugguest. Not after a few seconds, not after minutes. Using the 'Fax Devices' tab also doesn't show me any HP Fax device.
So basically my question is: How do I setup the fax functionality in SL with my printer?
Yes, it is connected over network, and the fax functions did work perfect over network with the 10.5 drivers from HP. Am I running into SL limitations? Does SL fax-drivers still support the (not optional, but default builtin) network functions of the C7280? Or... Am I just a noob that just can't find out how the setup a Fax device the obvious way
Thanks
- C

Hello mscheidell,
Yes, I was aware of the 'two' 7200 series drivers, but thank you for checking with me.
Okay, now how did you 'add' your fax device for your printer? Did it show up a second version of your printer in the 'Add printer' box, with type FAX? Or did you just add the same 'found' printer again, but the second time with the FAX printer drivers (manual selected)?
Right now, I only get one entry when I try to add my printer into SL: It find the Photosmart C7200 series with 'kind' Bonjour. That's the only thing that will show up in my 'found' printers, even after waiting a few minutes. People in these discussions are telling me there should show up a second 'found' printer with 'Kind' HP-Fax, but that just won't happen for me.
I also tried to add the same found 'bonjour' printer again, and select manually the 'Photosmart C7200 series - fax' driver. SL tells me then there is already a print queue for that printer, but I tell SL to add this printer anyway. Then I have this C7200 series Fax device in my printing list. Using this driver seems to work fine, I can fill in fax recipients, but hitting the print button, caused the C7200 to spit out it's complete papertray, printed with bogus ascii signs only on the first lines of the page, instead of really faxing that document. So I concluded that this was not the right way to get the fax working....
Thanks for all the help again.
- C

Got new miniMac servers with 2x750GB drives. How to setup and confirm RAID mirror?

Literally just got shiny new miniMac Server with the dual 70GB internakky hard drives/disks with
OS X 10.7.$ LION pre-installed. What a nice machine in a super cool box!
Seemed to bootup and run fine!
Now my issue (there will be more for this MAC newbie):
A. How to setup AND more importantly (item B below) CONFIRM that a RAID MIRROR is working?
Want nothing fancier than 2-nd drive is exact duplicate of 1-st drive at all times.
That is, an 'active and full up-to -the second" backup of the main 1-st drive.
I have done nothing to 1-st drive as it came from APPLE.
When I try to setup RAID set using DISK Utility, I get message about system(1-st drive) can't be used in a RAID or such.
yet I can add 2-nd drive to what I tink is a RAID set and then 'Enable' it.
It seems to add another entry to thr left-side of drves list panel but not sure that 1-st and 2-nd drives are BOTH in the new
"RAID SET' or that the set just consists of the "single" 2-nd disk?
B. I don't think that 1-st drive data is actually being duplicated to 2-nd drive.
For instance, how do I know that it was 'caught up' to match 1-st drive AND then is
staying caught up?
C. A 'RAID UTILITY' Icon brings up a not-available message, but I think that is because I don't
have HARDWARE RAID controller, just software RAID, correct?
D. What is 'Time Machine' and how does it play into this? I do assume that somehow/someway I need to
have off-machine backups also to be truly protected? How would a 2-nd identical miniMAC server be best
deployed to back each other up, in addition to their own internal RAID-ed disks that items above address?
My whole point of buying 2x750GB disks was to have mirror RAID set and
(foolishly) assumed that factory would set it up that way.
Please help me get setup right so when the inevitable crash happens,
I have some chance of recovering from it.
Regards,
Paul T
emai: [email protected]
Apple ID: N3UD
Phone: 610-613-0610

A. What are you adding to the RAID: a partition or a hard drive? You can only add hard drives to a RAID. RAID Utility should confirm that your RAID is working
B. No, I don't think so
C. It's because you haven't got RAID hardware.
D. Time Machine is a backup system in external drives. If you want, you can do backups in a external hard drive.

How to setup NPIV as Cisco9124 directly linked a Emulex HBA N-port

I had a cisco9124 switch and enabled npiv on the switch.
also I had a HBA card, and setup a N-port.
I can find the N-port pwwn number on the cisco9124,
and setup the virtual pwwn to my vsan1.
my question is:
my configuration is correct? can let 9124 directly linked a HBA N-port as NPIV configuration? I think something is wrong. I am no NPV device.
how can let the virtual ports know which actual port manage the virtual ports.
I mean for example:
my fc1/8 port is with 4 virtual ports, how to setup the 4 virtual ports to fc1/8,
or just donot care the fc1/8, just found all the virtual ports and setup the virtual ports luns, then my emulex HBA card will find the luns?
BRs

we use Qlogic 4G 2-port HBA and use RHEL5 OS on DellT105
we are in RHEL5 created 4 virtual ports on one port of HBA.
then we can find the 4 virtual pwwn on our MDS9124, then I added the pwwn on our vsan and reactivated.
then created 4 luns, each lun assigned to each virtual port separately, finally I checked our RHEL5, only found 1 lun is correct. found 2 luns lost and 1 luns allocated to 2 virtual HBA.
configuration like the following on our switch:
vsan 1 wwn 21:01:00:1b:32:a9:f0:04 fcid 0x2e1435 dynamic
vsan 1 wwn 21:01:00:1b:32:a9:f0:05 fcid 0x2e1436 dynamic
vsan 1 wwn 21:01:00:1b:32:a9:f0:06 fcid 0x2e1439 dynamic
vsan 1 wwn 21:01:00:1b:32:a9:f0:07 fcid 0x2e143a dynamic
    member pwwn 21:01:00:1b:32:a9:f0:06
    member pwwn 21:01:00:1b:32:a9:f0:07
    member pwwn 21:01:00:1b:32:a9:f0:04
    member pwwn 21:01:00:1b:32:a9:f0:05
zoneset name IBMzoneset2 vsan 1
    member IBMzone2
zoneset activate name IBMzoneset2 vsan 1

How to setup Cost Centres driven purchasing approval Hierarchy

Hi Guys,
My client has a Cost Centre set as a segment of their Key Flexfield
Every Approver has cost centre limited approval limit attached
Eg:
Approver AAA can approve upto 100$ for cost centre 1111 only
Approver BBB can approve upto 200$ for cost centre 2222 only
Approver CCC can approve upto 200$ for cost centre 1111 only
Required:
When Requester creates a requisition for a certain cost centre (ie cost centre 1111), oracle should build an approval list based on approval limits.
In our example:
Requestor creates requisition for 150$ for cost centre 1111
Generated Approval List: Approver AAA -> Approver CCC
Any ideas?
Thanks,
Iana

Thanks Sandeep!
My problem is not how to define approval groups (this will work!), but how to generate an approval list (or how to setup hierarchy)
Approval list should be generated from those people who can approve my cc, not my next in line manager
Eg:
when I create Req for cc 1111,
My approval list shd be: Approver AAA -> Approver CCC
when I create Req for cc 222,
My approval list shd be: Approver BBB
One solution can be to create a separate hierarchy for each CC range (ie Marketing, IT, etc) and let requestor to choose the correct hierarchy from LOV. The problem here will be that multiple hierarchies are difficult to maintain. For example, if the position for Deputy CFO changes, I have to adjust each hierarchy

How to setup a Default Playlist to Airport but allows BYOD playlist override?

Sorry for the unclear description.
Here is what I am trying to accomplish. I have my laptop or ipod playing a default playlist to my Airport express attached to my Stereo system. The music plays fine with no issues. I come into the house and want to play music from my iphone or ipad, I cannot connect or play to airport express since it is already sync'd or acquired by my laptop.
My goal is to have a default playlist playing all the time. When myself, my kids, or anyone comes in to house they can have priority over my laptop to play their music. Then when they disconnect, stop playing music, or leave the house; the default playlist kicks back on and continues to play out the speakers via the airport. I am trying to do this without human manual interaction.
I can do all of this manually like disconnect laptop, new device syncs to airport, then when they leave manually start playlist. But I am trying to figure out how to do this dynamically without human interaction.
Any ideas or solutions on how to get this to work?
Thanks!
T.

Hello,
I'm either blind or over-worked (probably both) but I can't seem to find how to setup a DMZ on the XTM 330. I need to add an Avaya IP phone system and don't want to try using SIP because the vendor said they need no NAT.
Can someone please either direct me to the correct spot in the documentation or tell me how to do it?
Thanks in advance
This topic first appeared in the Spiceworks Community

How to setup antispam correctly?

Similar Messages

Maybe you are looking for