How to setup Blackberry L1 paging equivalent on the iPhone using Active Synch?

Hello All
I am enquiring about setting up email alerting triggers to specific email verbiage; either trigger word in the Subject of an email, or specific sender.  From an enterprise support personel perspective, our Help Desk pages us using the Remedy ticketing system that sends us an email.  On our Blackberries we then setup a Level 1 paging alert to the specific static subject line of that email that gets sent.  This way all other email alerting (audible or vibration) can be turned off and we set alerts to specific Subject line or Sender specific notifications so we are not alerted to the 1000 some odd emails we get daily and can respond to emails during an on-call rotation in the evenings.
Is there any way to setup alerts on the iPhone in a similar fashion using Active Synch to a Microsoft Exchange 2010 server?

Yeah, I can't do exactly what you are asking.  I get all the alerts as texts which alows me to then deal with them using a different "ring tone" but Apple is still behind Blackberry with thie one.  VIP support in the next version of iOS might help a litte.  Still not as roust but at least you could put remedy as a VIP and assign a different ring tone to it.

Similar Messages

  • How to setup a canon ip2600 printer without the cd?

    how to setup a canon ip2600 printer without the cd?
    Solved!
    Go to Solution.

    Hi Santana,
    The drivers for the PIXMA iP2600 can be downloaded from the Canon USA website.  The following link will take you to the initial download page for your PIXMA iP2600:
    PIXMA iP2600 Drivers and Software page
    Once on the initial download page for your model, please do the following:
    1.  Verify that the operating system detected in the "OPERATING SYSTEM" drop-down menu is correct, and if it is not, please click the drop-down menu to select your operating system.
    2.  Next, please click on the red arrow next to the "DRIVERS" section and click the printer driver file.  When you do, another page will appear giving details of the file you are about to download will appear.  
    3.  Please scroll down on the Details page and agree to the terms of the disclaimer message to continue with the download process by clicking on the "I AGREE - BEGIN DOWNLOAD" button.  After clicking the "I AGREE - BEGIN DOWNLOAD" button, follow the instructions to download and install the driver.  The time for the download process may vary depending on the speed of your Internet connection and the size of the file being downloaded. 
    Hope this helps!
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Can anyone tell me how to setup odbc driver and configure in the setup

    Can anyone tell me how to setup odbc driver and configure in the setup

    You can't switch languages in OS X programs, just in the OS itself. Insert the Leopard OS X disc, and choose your new preferred language when prompted.

  • How to setup adobe to send emails from the application?

    How to setup adobe to send emails from the application?

    Click Edit>Preferences and select the Email Account Preferences
    Click Add Account and select “Add other…” or if you use Gmail or Yahoo mail, select the appropriate choice for it.
    Enter your Email Account info and then click “Advanced Settings” and configure your incoming and outgoing mail settings per your email account in Outlook, Thunderbird or mail service.
    Click OK, and click Add. The new Email Account will now appear in your listed accounts.
    Click the new account and click “Make Default”
    The checkmark will indicate the new account is set as the default Email Account for Reader.

  • How do I set up microsoft outlook on the iphone?

    How do I set up microsoft outlook on the iphone?

    "Outlook" is the program you use to access your email account. You cannot use Outlook on the iPhone.
    You can, however, setup your same work email account you use in Outlook, in the "Mail" app on your iPhone.
    You will need to obtain the relevant email server settings, username and password that you used to set the email account up in Outlook on your PC, then follow these instructions:
    http://support.apple.com/kb/ht4810

  • How do I forward a text message with the iPhone?

    How do I forward a text message with the iPhone?

    You could take a screen shot (hold and release both buttons simultaneously) and then email the resulting image to someone.
    // crude workaround for now...

  • Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site

    Have an existing ex2010 sp3 organization.
    Could not run ex2013cu1 setup from my newly built 2012 server, getting the error in the subject line.  I used the command line to run the AD preparation steps successfully from my 2012 DC/GC, then tried to run setup again from the new 2012 server and
    still get the same error.  The error itself in the log is pretty useless:
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0137] [0] Starting Microsoft Exchange Server 2013 Cumulative Update 1 Setup
    [05/07/2013 01:19:13.0137] [0] **********************************************
    [05/07/2013 01:19:13.0152] [0] Local time zone: (UTC-08:00) Pacific Time (US & Canada).
    [05/07/2013 01:19:13.0152] [0] Operating system version: Microsoft Windows NT 6.2.9200.0.
    [05/07/2013 01:19:13.0152] [0] Setup version: 15.0.620.29.
    [05/07/2013 01:19:13.0152] [0] Logged on user: DOMAIN\ADMINISTRATOR.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0168] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='sourcedir', Value='\\h1\f$\junk\installers\server\Exchange\2013cu1'.
    [05/07/2013 01:19:13.0215] [0] Command Line Parameter Name='mode', Value='Install'.
    [05/07/2013 01:19:13.0215] [0] RuntimeAssembly was started with the following command: '/sourcedir:\\SERVER\f$\junk\installers\server\Exchange\2013cu1 /mode:Install'.
    [05/07/2013 01:19:13.0215] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:19:13.0793] [0] Finished loading screen CheckForUpdatesPage.
    [05/07/2013 01:19:38.0762] [0] Finished loading screen UpdatesDownloadsPage.
    [05/07/2013 01:19:40.0496] [0] Starting file's copying...
    [05/07/2013 01:19:40.0496] [0] Setup copy files from '\\SERVER\f$\junk\installers\server\Exchange\2013cu1\Setup\ServerRoles\Common' to 'C:\Windows\Temp\ExchangeSetup'
    [05/07/2013 01:19:40.0700] [0] Finished loading screen CopyFilesPage.
    [05/07/2013 01:19:40.0840] [0] Disk space required: 1292445007 bytes.
    [05/07/2013 01:19:40.0840] [0] Disk space available: 23767240704 bytes.
    [05/07/2013 01:19:59.0762] [0] File's copying finished.
    [05/07/2013 01:19:59.0965] [0] Finished loading screen InitializingSetupPage.
    [05/07/2013 01:20:02.0934] [0] Setup is choosing the domain controller to use
    [05/07/2013 01:20:09.0325] [0] Setup is choosing a local domain controller...
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    [05/07/2013 01:20:11.0809] [0] Setup will use the domain controller ''.
    [05/07/2013 01:20:11.0809] [0] Setup will use the global catalog ''.
    [05/07/2013 01:20:11.0825] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0919] [0] Exchange organization container for the organization is 'CN=DOMAIN,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=domain,DC=local'.
    [05/07/2013 01:20:11.0966] [0] Setup will search for an Exchange Server object for the local machine with name 'WEX1'.
    [05/07/2013 01:20:12.0028] [0] No Exchange Server with identity 'WEX1' was found.
    [05/07/2013 01:20:12.0044] [0] The following roles have been unpacked:
    [05/07/2013 01:20:12.0044] [0] The following datacenter roles are unpacked:
    [05/07/2013 01:20:12.0044] [0] The following roles are installed:
    [05/07/2013 01:20:12.0059] [0] The local server does not have any Exchange files installed.
    [05/07/2013 01:20:12.0075] [0] Server Name=WEX1
    [05/07/2013 01:20:12.0137] [0] Setup will use the path '\\SERVER\f$\junk\installers\server\Exchange\2013cu1' for installing Exchange.
    [05/07/2013 01:20:12.0137] [0] The installation mode is set to: 'Install'.
    [05/07/2013 01:20:27.0591] [0] An Exchange organization with name 'DOMAIN' was found in this forest.
    [05/07/2013 01:20:27.0591] [0] Active Directory Initialization status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Schema Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Organization Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0591] [0] Domain Configuration Update Required Status : 'False'.
    [05/07/2013 01:20:27.0841] [0] Applying default role selection state
    [05/07/2013 01:20:27.0872] [0] Setup is determining what organization-level operations to perform.
    [05/07/2013 01:20:27.0872] [0] Because the value was specified, setup is setting the argument OrganizationName to the value DOMAIN.
    [05/07/2013 01:20:27.0872] [0] Setup will run from path 'C:\Windows\Temp\ExchangeSetup'.
    [05/07/2013 01:20:27.0888] [0] InstallModeDataHandler has 0 DataHandlers
    [05/07/2013 01:20:27.0888] [0] RootDataHandler has 1 DataHandlers
    [05/07/2013 01:20:27.0903] [0] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.  See
    the Exchange setup log for more information on this error.
    [05/07/2013 01:20:27.0935] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:21:04.0154] [0] The registry key, HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\V15\Setup, wasn't found.
    [05/07/2013 01:21:04.0154] [0] End of Setup
    [05/07/2013 01:21:04.0154] [0] **********************************************

    Hi,
    The cause is clearly described in the log:
    [05/07/2013 01:20:11.0794] [0] [ERROR] Setup encountered a problem while validating the state of Active Directory: Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency. 
    See the Exchange setup log for more information on this error.
    [05/07/2013 01:20:11.0794] [0] [ERROR] Could not find information about the local site. This can be caused by incorrect configuration of subnets or sites or by replication latency.
    I'd suggest you check NIC settings and AD configuration.
    Hope it is helpful.
    Fiona Liao
    TechNet Community Support

  • "Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

    Team,
    I am trying to Install Exchange on my Lab, getting below error
    message.
    The Schema Role is installed on Root Domain and trying to install
    exchange on Child domain.
    1 Root Domain - 1 Child domain. both are located on single site.
    “Setup encountered a problem while validating
    the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
    replication to complete.”
    Followed below articles:
    http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
    http://www.petenetlive.com/KB/Article/0000793.htm
    transferred the schema roles to different server on root domain, still no luck.
    can someone please help me.
    regards
    Srinivasa k
    Srinivasa K

    Hi Srinivasa,
    I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
    1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
    After finishing this,
    2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
    3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
    4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
    5. Finally, run the setup program
    Hope this will help you
    Regards from Visit ExchangeOnline |
    Visit WindowsAdmin

  • How to set a specific width to all the TextInputs used in a mxml file on its creation complete?

    How to set a specific width to all the TextInputs used in a mxml file on its creation complete?

    Hi subhajit nag,
    I think the best approach would what I say is if you can make use of a Global variable or using a Singleton class having a variable which can be accessed globally through out the application.
    Below is the sample what I am talking to:
    So in below example you can access the variables textInputWidth and textInputHeight globally throghout the application since you have decalred them in main mxml file.
    You can access these variabled in another mxml file as Application.application.textInputWidth and Application.application.textInputHeight. So if at all you are required to modify these values you are only required to modify at a single place in main mxml file..thats it.
    If you are use any Singleton classes like ModelLocator you can place these variables in this class and refer from that class.
    Hope this resoved your problem..
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical">
    <mx:Script>
      <![CDATA[
       [Bindable]private var textInputWidth:int = 250;
       [Bindable]private var textInputHeight:int = 25;
      ]]>
    </mx:Script>
    <mx:Canvas id="canvas1">
      <mx:TextInput id="txt1" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:Canvas id="canvas2">
      <mx:TextInput id="txt2" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:Canvas id="canvas3">
      <mx:TextInput id="txt3" width="{textInputWidth}" height="{textInputHeight}"/> 
    </mx:Canvas>
    <mx:TextInput id="txt4" width="{textInputWidth}" height="{textInputHeight}"/>
    <mx:TextInput id="txt5" width="{textInputWidth}" height="{textInputHeight}"/>
    </mx:Application>
    If this post answers your question or helps, please kindly mark it as such.
    Thanks,
    Bhasker Chari 

  • How do i add contacts from address book to iPhone using itunes 11.0.2

    how do i add contacts from address book to iPhone using itunes 11.0.2

    Check the manual http://manuals.info.apple.com/en_US/iphone_user_guide.pdf, but it is done via the syncing process with iTunes or iCloud.

  • How can I send an XML request to the server using servlets

    How can I send an XML request to the server using servlets

    http://forum.java.sun.com/thread.jspa?threadID=5158333
    http://forum.java.sun.com/thread.jspa?threadID=5158705
    Crossposting is lame.

  • How do i zoom in a video on the iphone 5

    How do i zoom when taking video on the iPhone 5?

    I'm having the same issue. It had the feature before and worked beautifully, and now when I try I do the same pinching/stretching method and nothing happens. I don't have an option to zoom anywhere in photo or video.

  • How do I make a settings shortcut on the iphone 5? Specifically the do not disturb function??

    How do I make a settings shortcut on the iphone 5? Specifically the do not disturb function??

    Is there an app that does it? I found a brdrck website but it is unavailable now  

  • How do I turn off location services on the iPhone 6?

    How do I turn off location services on the iPhone 6?
    Yes I already went to Settings > Privacy > Location Services, is not allowing me to turn it off.
    And yes I have disable the restrictions too.

    When I tapped the screen, there was a symbol on the left that looked like arrows going in a circle and on the right were the arrows crossed. The crossed arrows were orange, when I tapped this orange symbol, it turned to white and the songs STOPPED shuffle.

  • Good Morning.  How do I delete directly from the iPhone, with out synching, movies and/or tvshows?

    Good Morning.  How do I delete directly from the iPhone, with out synching, movies and/or tvshows?

    I had the same problem with Iphone 5 iOS 8, none of the methods described above were successful.
    Finally, Iexplorer helped to solve my problem.
    http://iexplorer-support.macroplant.com/customer/portal/articles/1325738-how-to- delete-all-photos-from-an-iphone-or-ipad
    best regards,
    salad

Maybe you are looking for