How to setup Blazeds with Flex builder 3

I need to setup Blazeds with Flex builder 3. Can anyone help me out regarding this?

Very helpful! Should be placed in the blazeDS docs!
Chris

Similar Messages

Researching to use Blazeds with spring. I can use blazeds with flex builder 3.

I would like to know, If i can use balzeds 4 with flex builder 3.
I have all my applications on flex builder 3 with web services.
Trying to convert to blazeds with spring.

Yes, it is very much possible. I have done the integration, please check the steps in my post.
http://sixtyfourarts.blogspot.com/2009/05/gae-integration-with-blazeds-in-eclipse.html

How to setup headphone with in-build microphone in hp 15 r-022tx

hey,
i have hp 15 r-022TX laptop and in this laptop as you know there is only 1 3.5 mm jack slot for headphone.
i want to use headphone with in-build microphone (philips SHM1900) and for that i purchased a 2 in 1 jack to connect to laptop
jack details are here ( "http://www.flipkart.com/callmate-asc-iphone-audio-split-data-cable/p/itmdh9nfhfjz35fc?pid=ACCDDRSYRH... )
but using this jack still laptop is using its in-build microphone not the headphone's mic.
headphone is working with the jack but i cant use its mic.
i am using windows 7 ultimate(64 bit).
can anyone help me out.
thanks.
This question was solved.
View Solution.

HI @Rajatsharma_yam ,
Thank you for your inquiry, I will do my best to assist you.
I grasp that when you connect your combo headphones and mic the mic portion is not working.
Have you done all your Windows updates?
Have you ran the HP Support Assistant to ensure you have the latest HP drivers installed.
If you look at the physical connector how may bands do you see on it? You should have 3 or 4 bands.
Are you sure they are connected all the way into the headset and the port on the notebook.
When you have the combo headset connected go to control panel/sound and open the Window.
Click on the recording tab, is the mic listed? You should be able to select and configure from this Window.
Here is a link to Resolving headphones and headset problems (Windows 8) that may also be of aid.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

How can I create an executable with Flex Builder 3?

I'm working with Flex Builder 3 right now and I've run my
head into a brick wall. Here's the situation:
I'm creating a standalone application (runs in its own
window, not in a web page) and I want to run it on a computer that
does not have Flex Builder 3 installed. Help files and web searches
haven't directed me to the right answer, so I was hoping that
someone on this forum could help. Anyone know how to create a .exe
file or something else that can be run outside of Flex Builder?
Thanks a lot for any help!

quote:
Originally posted by:
rob_parkhill
Convert it to an AIR Application?
Thanks Rob,
This may be what I'm looking for, but I don't know enough
about the difference. I guess I should have pointed out that I'm a
complete Flex Novice!
Anyway, with Flex Builder, I created an MXML Application. I
went through all my various options again in Flex Builder and found
that under the project menu, I could export a release build in what
appears to be the format you mentioned. I managed to create a .air
file, but it is not a recognized file type on my computer. I tried
double clicking it and the built-in windows services couldn't even
find a possible way to run it. Am I missing some important step?
Thanks again.

How to integrate flex 4 SDK with Flex builder 3

Hi,
I am trying to integrate flex sdk 4 with flex builder 3 but I am unable to run the code and as well as I am unable to see the design screen while creating.
Can anyone please suggest me how to integrate sdk 4 with flex builder 3.
Thanks,
Sri

So you've unpacked the SDK, added it in the list in properties, and confirmed your project is using the new SDK, right ?
If you create a brand new project with a simple file in, exactly what happens ?

Use VSS or similar tool with Flex Builder 3 Profesional

Hi
I want to use Visual Sorcesafe or other similar tool with
Flex Builder 3. so that we can work in a team on single project.
Can anyone please give some ideas, that how can i do this.
Thanks & Regards
Ajay Dekavadiya

Almost anyone using this list is probably going to be using
CVS or SVN with Flex rather than Visual SourceSafe, as they are
free. You can get plugins for Flex Builder/Eclipse that integrate
CVS or SVN source code control into your project. Many projects use
SVN now, and on Windows TortoiseSVN is frequently used as a context
menu based way of managing changes in your source code repository.
You can do some googling for 'eclipse svn plugin', or I
believe CVS is built-in by default, which you would see under
Window->Preferences->Team->CVS in eclipse/FB.

"advanced data grid" with flex builder 3.0

I'm getting watermark as "Flex Data Visualization
Trial" when tried to use advances data grid with flex builder 3.0. There are some links floating on the internet where it's suggested that the license key should be provided in the flex-config.xml to avoid this issue. I would like to know if this componenet is stable with flex builder 3.0 and is it ok to use this in production environment?

Someone from Adobe might be able to answer more definitely
but it's probably just not considered compatible with a modified
Eclipse (at least, the installer). It may just be the installer
blowing up when it shouldn't. I think Adobe doesn't want to support
install configurations that they don't have setup and tested. I had
a similar issue once and solved it by doing the following... not
sure if it'll work, and it's more of a last resort:
Setup a regular eclipse install - install the plugin there.
Somehow, you'll have to keep track of all the files it adds, either
using timestamps or some compare software. It should be a bunch of
files and/or folders in the '/plugins' directory, and possibly a
few others in '/configuration', maybe '/features'. Take all the new
folders and any jar files etc, and drop them into the same folders
in your special Eclipse version. Hopefully when you start it up
you'll get the Flex functions...
Of course, you could end up hosing your entire "NWDS"
(whatever this is) install. So you probably want to test it out
first!

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

How to setup airprint with my canon printer

How to setup airprint with my canon printer asnd ipad 3

Is your printer on the list of Airprint enabled printers? If it is, you set it up through your home computer and your iPad should recognize it. If it is not, you can not make a non-Airprint printer Airprint enabled.

How to create PDF with Form Builder (T-Code:SPF) and how to use it?

How to create PDF with Form Builder (T-Code:SPF) and how to use it? Is there anyone can show me some doc. or PA material ? << removed >> Thank you very much!!
Edited by: Rob Burbank on Nov 11, 2010 1:04 PM

PDF forms also known as Adobe From or Interactive Forms.
Check this link -
Interactive Forms
REG:ADOBE FORM
Adobe forms
Regards,
Amit

Tutorial for creating a J2EE project with "Flex Builder 3 Beta 3 " ?

Hi,
I'm trying to set up a Flex environment with:
Flex Builder 3 Beta 3 stand alone
WTP (from eclipse update manager)
LCDS 2.5 (with JRun)
JBoss 4.2.2GA
At this moment I successful installed everything (but not set up). I added WTP at Flex Builder3 (with the eclipse update manager). I copied the two flex-tomcat files in jboss.
Then in Flex Builder 3 I created a new Flex Project. In the wizard first window, I selected J2EE, Livecycle and WTP. Then in the next window I need to configurate the J2EE server.
I couldn't find any information/tutorial for this window? Is there a tutorial for this?
This window ask me:
Target Runtime: I created a new one for JBoss 4.2.2 (during this process flex builder asked me to add a project but actually I'm creating this project so I hadn't any project to add (??)).
ContextRoot: name of the project I'm creating (default). Is it good?
Content Folder: the default is "WebContent". Is it good?
Flex War File: What is that? Where do I find it?
Thanks a lot,
Jerome

The settings you mention all sound fine, but the I believe the Flex War file may be what you referred to as the flex-tomcat files (specifically the one should be called flex.war from the install folder).
You don't need to deploy the flex.war file to JBoss manually, when you create a project, you just select the file in the wizard and it is extracted and used as a template for the new project. In fact, it may cause a port conflict with your project if you do deploy manually it (unless you tweak some of the config files), so it's probably worth removing it from the deploy folder if you did put it there. The other file, flex-admin.war, can stay without causing issue.
The closest to a tutorial that I am aware of is if you search "New Flex Project" in the help system, it talks about what each of the options should be when creating LCDS projects.

Apps built with Flex Builder 2 - 3 not compatible with new Flash Players and/or new browsers, FB4 OK

My applications built with Flex Builder 2 and 3 do not start in new versions of Flash Player and/or new browsers when run remotely. I have not been able to test all combinations of FP and browser versions but there is no problem with applications built with Flash Builder 4. Does anyone have info on this?

Hi Dimitar,
Did you close all the browsers (and applications which use
Flash Player) when you install Flex Builder 3 Beta 3 or Flash
Player? You can try manually installing it from <FB install
location>/player/ directory. Here're some
installation/unintallation instructions of Flash Player:
http://labs.adobe.com/wiki/index.php/Flex_3:Release_Notes#Installing_Flex_SDK_3_Beta_3
thanks,
Sharon

Building Flex Application with Flex Builder installed in a remote server

Building Flex Application with Flex Builder installed in a remote server and different developers accessing it via VNC etc
I have a requirement as below..........this is mainly to look for a solution where we can see a environment.............where we can stop developer to install flex builder locally, download/check out code locally and work locally ..............Please have a look ........
1. There is Remote Server hosting our source code say 1st Remote Server
2. There is another 2nd Remote Server which support workspace for each user
3. Flex Builder installed in the 2nd Remote Server
4. Each Developer connects to the 2nd Remote Server via VNC etc log in to their workspace
5. Each developer check out code in their workspace by connecting to 1st Remote Server.
6. Start Flex Builder instance which is running in the 2nd Remote Server
5. Each developer open source code modifies, build application in their workspace and check
Do anyone have any idea whether this kind of environment is possible in Flex or can anyone suggest something which is almost close to this ? I heard Cloud Computing is something that world is looking to represent this kind of solution .............not sure though

Hi
The concept of cloud computing is not even very clear to me
I think this is what I understood about it ...........from this link http://communication.howstuffworks.com/cloud-computing.htm
It says
"Instead of installing a suite of software for each computer, you'd only have to load one application. That application would allow workers to log into a Web-based service which hosts all the programs the user would need for his or her job. Remote machines owned by another company would run everything from e-mail to word processing to complex data analysis programs. It's called cloud computing, and it could change the entire computer industry"
"There's a good chance you've already used some form of cloud computing. If you have an e-mail account with a Web-based e-mail service like Hotmail, Yahoo! Mail or Gmail, then you've had some experience with cloud computing. Instead of running an e-mail program on your computer, you log in to a Web e-mail account remotely"
My issue is not with the license. The solution that I am looking for is
1. Don't want the developer to download the source code in any fashion either checked out or anything else in the local machine
2. Want the developer to work directly on the server
3. Looking for a solution where each developer is not required to install Flex Builder locally and the developer can use Flex Builder that is installed on the server and in his workspace and create/modify build on the server itself
Hope I could make you understand this time ................
Regards
Biswamit

SDK 3.3 With Flex Builder 3?

Hi --
I am new to Flex -- I am a Flash / Actionscript developer but
have been
asked to dig into Flex for possible use on a project at work.
Can I use the
3.3 SDK with Flex Builder 3? I figured as long as I was
starting out new I
should work with the latest version of the SDK.
Thanks
Rich

So you've unpacked the SDK, added it in the list in properties, and confirmed your project is using the new SDK, right ?
If you create a brand new project with a simple file in, exactly what happens ?

Install Spring IDE 2.X plugin with Flex Builder 3

I'm new to Flex environment, but what I'm trying to do here is to install Spring IDE 2x with flex builder 3 using update plug in manager....
After attempted many times, I gave up because I got a bunch of errors. Please help me any instructions would be really appreciated.
Since Flex built on top eclip, so here what I followed:
http://springide.org/project/wiki/SpringideInstall
Help Help Help please.....
Thanks,
Dave,

He levancho.
Thank you for your help. I almost got it with your advice.
Putting it all together it is the following for me:
1) create an Adobe ID at https://cocomo.acrobat.com/
2) unzip CocomoSDK_0.91 and place that directory under your
eclipse_install_dir/plugins
3) create a new Flex Project
4) add the
eclipse_install_dir/plugins/cocomo../lib/player10/afcs.swc to Flex
Build Path / Library path in the project properties
5) Change Flex Compiler / Require Flash Player version to
10.0.0 in the project properties
6) Add the attached code as a test application ...
I found the following tutorial very helpful:
http://www.adobe.com/devnet/flex/articles/cocomo_gettingstarted.html
Notice that I changed some namespaces since the given code
did not exactly work for me.
Thank you, Noam

How to setup Blazeds with Flex builder 3

Similar Messages

Maybe you are looking for