How to setup calendar email connectivity

How do i setup the email connectivity of a collaboration room calendar without using a microsoft exchange server. Can i just use java mail server?

You can configurate the email connectivity under configuration -> collaboration ->
transports -> mail transport. This mail transport uses the java mail library. You
need to provide the host name of your mail server. But keep in mind that by doing it you won't have calendar connectivity. You will have only mail connectivity to send mails from KM folders and mails for collaboration tasks for example.
Regards,
Marc

Similar Messages

How do You Test EMail Connectivity?

How do You Test EMail Connectivity?
Once you setup the mail gateway with an IP address, port, and domain name. How can you test email connectivity? How do you force the MARS Appliance to send an email?

There is no "test e-mail connectivity" button/function. Essentially you need to configure inspection rules to notify you when they are fired by mars.
You will need to setup a user (preferably a non-admin account for testing) under "Management"-"user management"(if you haven't already done so) make sure to supply e-mail address.
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/initial/configuration/setup.html#wp1030836
Now you can "Configure a Rule to Send an Alert Action." the following link explains how to do this...An easy one would be the "System Rule: CS-MARS Login Failures - Non-Admin User" rule. Follow the instructions in the link below under the "Configure a Rule to Send an Alert Action" section to modify the rule mentioned above. Keep in mind that this rule only fires when there are login failures. Once you have modified this rule try logging into mars using the non-admin user with a bad password...you should get a e-mail from MARS.
http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/user/guide/combo/alerts.html#wp1056101
Hope this helps.
Dustin Suko

How to setup the email application for my gmail account in firefox os.. I need the configuration steps for gmail.

I don't know how to setup the email account sync in firefox os.. can anyone explain the steps to be followed for setting up a gmail account...

hello Dhanraj K, for gmail accounts there shouldn't be much manual configuration required. please try to set it up like described in [[Add an email account to the Mail app in Firefox OS]]

How to setup excel workbook connection AUTO refresh in Power-pivot?

How to setup excel workbook connection AUTO/Online refresh in Power-pivot portal?
Please do let us know your feedback. Thank You - KG, MCTS

Power Pivot portal? On SharePoint? On PBI for O365?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

How to setup singnet email using other? So desperate.

Can anyone in Singapore help me. I bought it from shop. How to setup singnet email under add new account> other>......

Have you tried what is suggested here http://forums.hardwarezone.com.sg/showthread.php?t=3043300 ?
Incoming : pop.singnet.com.sg
Outgoing : mail.singnet.com.sg
Edit: you should also be able to sync email account settings from your computer via iTunes on the device's Info tab (from the iPad manual) :
You can sync email account settings from Mail on a Mac, and from Microsoft Outlook 2003, 2007, or 2010 or Microsoft Outlook Express on a PC. Account settings are only transferred from your computer to iPad. Changes you make to an email account on iPad don’t affect the account on your computer.
Message was edited by: King_Penguin

How to setup verizon email on macpro book

can anybody tell me how to setup verizon email on macbook pro?

The same way you would setup any email account using any email program on any type of computer.
Go to the Verizon website and get all the info on the settings needed.

How to setup rescue email in icloud

i want to know how to reset the security questions of an icloud account as i have the password but dont remember the security answer of the icloud account and
also want to how to setup rescue email address in icloud account as there is no rescue email id in my account please guide and assist with the problem.
thankyou

Dear John,
Goto Tcode SCOT:Node>create node>give node name and description>ten continue>choose RFC or HTTP radio button>if say you choose RFC>continue>click address type>then continue-->check various options
Check Tcode SCOT, the configuration of the SMTP should look like:Mail Host: the Exchange server domain name (FQDN)
Mail port: 25
Code Page: what ever you need (like 4110 unicode UTF8)
in the supported address choose Internet then click on the SET button and include your company address like:@XXX.ac.in:)
In the SAP's user manager (SU01) the user need an email address to be able to send emails.
Please check weather the default domain in transaction SCOT>menu>settings is set or not.
Check SAP note If you use SMTP check the note --> 455140,487754. & 455140 Also check that in Tnx SCOT
-->Node SMTP
-->Supported address type
-->button internet set.
--> Address area
'*' must be there.
Regards,
Ashutosh
Edited by: ashutosh singh on Sep 3, 2008 7:08 AM

How to setup dialup internet connection(PPP) in Solaris for ADSL modem

I ,m new to Solaris. How to setup dialup internet connection(PPP) in Solaris for ethernet ADSL modem? will solaris recognise the ethernet modem?? I only have windows drivers for the ethernet modem. Where to look for info on this?

The setting you set in IE also affects Firefox. For example, if you set the following, then when Firefox makes a connection request to Windows, Windows is supposed to dial the connection:
Windows Control Panel > Internet Options > Connections or <br>
Internet Explorer Tools menu > Internet Options > Connections
"Dial whenever a network connection is not present"
Source: [[How to make Firefox automatically dial up]]

How to setup a T3 connection for use in weblogic

When I try to make a t3 connection using the existing http port that I have, I get the following exception
Error message :javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://srvr:7092: Bootstrap unable to get a t3 connection to srvr/11.16.8.10]
How do I setup a T3 connection
Thanks

Hi,
Is the above phenomenon right? How can I know the tip connection
is established? Shouldn't it display 'Login' after it display 'connected'?
To display login at the tip connection you can do one of the following.
1. remove the keyboard and reboot with a tip connection.
2. at ok> set the output-device input-device as ttya
setenv output-device ttya
setenv input-device ttya
reset.
Note: the same can be done from a teminal/console using eeprom command.(man eeprom)
To get back the display and keyboard access during bootup
you will have to reset input/output device values back to the default values
setenv output-device display
setenv input-device keyboard
3. Add the following to the /etc/inittab file
+++++++++++++++++++++++++++++++++++++++++
c5:234:respawn:/usr/lib/saf/ttymon -g -h -p "`uname -n` ttya login: " -T sun -d /dev/ttya -l console -m ldterm,ttcompat
+++++++++++++++++++++++++++++++++++++++++
Please save the original copy ..
"init q " (to make the inittab file to be read again)
4. using admintool -->Browse->Serial ports->Select ttya->Service Enable->Ok->Exit.
For KSLD setting the output-device and input-device is the best option.
KSLD is EOL (End of Life) so product support will not be available.
HTH
-Dhruva

How to setup iPad Email to access school email hosted via google

Has anyone been able to set this up ?
I would like to setup my email account which is in the form of
[email protected]
Normally the email is accessed via the following portal which seems to be SSO for the google hosted service;
https://student.det.nsw.edu.au/
I tried several things including adding a google account, then exchange account, with no luck.
From speaking with one of the teachers at the school, it seems that students email is hosted via gmail.

Your post is a bit open ended....
First thing - You need to decide if you want to use virtual domains or not.
If
     [email protected]
     [email protected]
     [email protected]
all should be separate mailboxes, then you need virtual domains.
If those 3 addresses can all go to the same mailbox, then you don't.
If you don't need virtual domains, then don't use them... things are simpler without that feature.
If thats the case, in the domain name field in Mail service, enter your primary domain.
You'll then need to enter your other domains via command line.
First, check your mail domain setting with:
sudo serveradmin settings mail:postfix:mydomain
Here is how you enter more than one domain:
- Quit the Server app
- Issue this with your domains between the quotes
sudo serveradmin settings mail:postfix:mydomain = "domain1.com, domain2.com"
- Restart postfix to activate your change
sudo postfix reload
If you open the Server app, you will notice both domains are now listed.

How to setup BPEL JNDI connection on the application server

Hi
Can anyone tell me how to write a JNDI connection for my BPEL process? Currently we are invoking all my BPEL processes from a property file, but i need to call my BPEL process thru JNDI connection. Is it possible? If yes then How?
Has anyone got any idea? Please let me know
BTW, you need more clarification on the question, let me know please.
Thanks.
Deepak

Hi Grafl,
Chk this link
Folder creation in AL11 using ABAP program
try this code.This works on UNIX servers
data: unixcom like   rlgrap-filename.
data: begin of tabl occurs 500,
        line(400),
      end of tabl.
dir = unixcom = 'mkdir mydir'. "command to create dir
"to execute the unix command
call 'SYSTEM' id 'COMMAND' field unixcom
                  id 'TAB' field tabl[].
<b>Reward Points if Useful</b>
Regards
Gokul

How to setup Verizon email on Mac Mail

Here are the email server settings that work for me on iMac or iPad using Mac Mail program.
Verizon changed to different email server.
Make sure password for account is correct by resetting password:
Reset password by clicking "I cannot access my account link" on page or login below
https://login.yahoo.com/config/login?.intl=us&.partner=vz-acs&&.lang=en-US&.intl =US&.done=http://hom...
Enter username here to reset password :https://signin.verizon.com/sso/forgotflows
Passwords must match for verizon yahoo & verizon account.
email server settings:
Example
Name: john smith
email address:[email protected]
user name: johnsmith (Do not use full email address here)
Incoming Mail Server: incoming.yahoo.verizon.net
SSL: on (Port 995)
Authentication: Password
Outgoing Mail Server: outgoing.yahoo.verizon.net
SSL: on (Port 465)
Authentication: Password
user name:johnsmith
Password: current password for account
Save all settings and check for new email. Good luck.

The same way you would setup any email account using any email program on any type of computer.
Go to the Verizon website and get all the info on the settings needed.

How to setup imap email account on my iMac

I have set up imap accounts on my iphone, macbook pro, and ipad 3 but cannot get it set up on my imac. It appears as an account but will not connect and receive messages.

Hello, is this iCloud/MobileMe/.mac???
If not who is the provider, the part after the @ sign?
iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
IMAP (Incoming Mail Server) information:
• Server name: imap.mail.me.com
• SSL Required: Yes
• Port: 993
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password
SMTP (outgoing mail server) information:
• Server name: smtp.mail.me.com
• SSL Required: Yes
• Port: 587
• SMTP Authentication Required: Yes
• Username: [email protected] (use your @me.com address from your iCloud account)
• Password: Your iCloud password

HT4864 how to setup my email on my Acer home computer?

im trying to setup email on my computer so i can recieve mail and send mail back. how is that done? can you guide me please.

What version of Windows and what are you using as a client (Outlook?)
I assume this is iCloud mail you speak of.

How to setup and use connection pool in Web AS 7.0?

Hello SDN!
I'm developing a Web Dynpro Java application on SAP Web AS 7.0 My app using a couple of DAO classes as model instead of EJBs. These classes perform direct requests to database using JDBC drivers.
I've read that many of web-servers use their own connection pools. So I want to know:
1) how I can setup connection pool in SAP Web AS ?
2) how I can call this pool in my application?
Could you please give me some examples?
Regards, Lev.

hi lev,
check this document for jco pools
http://www.winfobase.de/lehre/lv_materialien.nsf/intern01/FB09D79A41930E34C125709F0046180C/$FILE/Tips&Tricks_JCo_Programming.pdf
ravindra

How to setup calendar email connectivity

Similar Messages

Maybe you are looking for