How to setup Check Writer (XML) for Canada?

I need to set up Check Writer (XML) for Canada. On MOS Note 459306.1 it appears that this is for US legislation. Has anyone successfully set this up for Canada, and if so, how?
Thanks...Paul

Please see (Cannot Find Documentation On Configuring Canada Check And Deposit Advice For XML [ID 557717.1]).
Thanks,
Hussein

Similar Messages

Data source for deposit advice xml and check writer xml

Could someone please tell me where I can find the data source for the Deposit Advice XML and Check Writer XML programs. Since these executables are now a spawned process (PYUGEN), I don't know how to get to the data source. I was able before to look at the queries in PAYUSPST.rdf and PAYUSCHK.rdf. Where are these queries located now? Any help is appreaciated.

Hi All,
I applyied the patch 6399100 and i got the seeded Check Writer (XML) and Deposit Advice (XML) programs.Im able to run the Check Writer (XML) with Parameter (Check Style :Seeded Archive Check Writer Template ) but where as the im unable to run the Deposit Advice (XML) due to Error msg: "No enties found for list of vales"for the 'Check Style' Parameter.
And for the above (only for Deposit Advice) i am not able to ecexute the SQL script given in the Doc ID : 459306.1 due to the error msg : cannot insert NULL into ("HR"."PAY_REPORT_CATEGORIES"."REPORT_GROUP_ID") if i see query the select * from apps.pay_report_categories where short_name like 'ARCHIVE%' there is no record exixts for ARCHIVE_DEPOSIT....
for this we required any other patch/setups.
And is the "Third Pary Check" will support XML Publisher ??
Any respose will be greatly appriciated.
Thanks,
Madhu
Message was edited by:
user589951

MICR font not displayed in PDF on SUSE Linux Server for Check Writer (XML)

We are generating checks by running the Check Writer(XML) concurrent request and are not able to see MICR fonts on the Check. We downloaded the free version from IDAutomationSMICR.ttf and the fonts were registered under /usr/local/fonts/micr directory. I registered in APPS and uploaded the file IDAutomationSMICR.ttf. Am I missing any steps. The DBA's have registered the fonts under /usr/local/fonts/micr on SUSE Linux Server . The custom Checks are generated but no luck with the fonts. Please advise. Can I download MICR fonts other than IDAutomation site? Appreciate your response.
Thanks,
Hari

I use version 11i, so the steps are probably different. Download a font file (gnuMICR for me). Extract it to a location of your choice on your operating system.
Follow these steps to load the MICR font to the server. (Step 11 was missing in some of the metalink documents in late 2007. I think Jan. 2008 will be OK).
1.     Log in as XML Publisher Administrator.
2.     Navigate to Administration->Font Files->Create Font File.
3.     Fields are Font Name and File. For Font Name choose any descriptive name. File will browse your PC to locate the font file.
4.     Navigate to Font Mappings->Create Font Mapping Set.
5.     Mapping name is the name you will give to a set of fonts. [MICR Font]
6.     Mapping code is the internal name you will give to this set. [MICR]
7.     Type: 'PDF Form' for PDF templates. 'FO to PDF' for all other template types.
8.     Create Font Mapping (this allows you to add multiple fonts to a set).
9.     Font Family is the exact same name you see in Word under Fonts. If you don't use the same name the font will not be picked up at runtime. [GnuMICR]
10.     Style and weight must also match how you use the font in Windows. Normal and Normal are good defaults. [Normal, Normal]
11.     DO NOT enter Language or Territory
12.     Choose a value for Font Type. [Truetype]
13.     Search for the Font you just created in step 3. [GnuMICR]
14.     Navigate to Configuration -> FO Processing -> Font Mapping Set. Can also be done at data def and template level under Edit Configuration. Hierarchy is Site-> Data Def -> Template.
15.     Select your new mapping set.
16.     Make sure the font is not referenced under File->Properties->Custom in the RTF template file.
17.     Select a temporary directory on your concurrent processing node (Configuration -> General). This needs to be a private area not shared by other processes, read writeable by the applmgr (owner of the $APPL_TOP file system). It should be fairly large 5 GB or 20x larger than any datafile being used. The fonts will be downloaded here the first time they are used.
18.     Also at this site level select your font mapping set.
19.     Upload a template that uses your special font and test using preview.

How to generate postscript in Check Writer (XML).

I have set the format for Check writer (XML) in the system administrator responsibility to Postscript, still it generates PDF and XML, but not the postscript. Where am I going wrong? Do I need to enable or do additional setups? Appreciate your help.
Thanks,
Hari

Hello,
Just install a Postscript Printer Driver and use :
rwrun.exe report=.. destype=file desname=c:\temp\output.ps desformat=psprinter
if psprinter is the name of the postscript printer you have installed.
Regards

Check writer XML not working.

We are using the oracle provided Check writer XML program for HR Payroll check printing. Check writer XML program is getting error ed out when we attach MICR font set up to the Check writer XML Template in template definition, works fine if we remove the MICR font set up for the template. And MICR font set up is working fine for other custom programs we developed. Any suggestions?

Ya i gone through the docs in the thread. the program works fine when we remove the MICR font setup for the template.
configuration
==========
RDBMS : 11.1.0.7.0
Oracle Applications : 12.1.1
Error is
========================
HR_6859_HRPROC_OTHER_PROC_ERR
APP-PAY-06859: An error has been detected by another process.
Cause: During processing, the master or another slave process has detected an error, communicated by setting the Payroll status to 'Error'.
Action: Examine the error log file and payroll messages to investigate the cause of the error.

Check Writer(XML)

Hi Guys,
            Need your quick help. Most of you are aware of Check Writer(XML) seeded report. I could get the data for all the Business Groups dynamically.
But the Logo and the Address of the BG remain same for any sorts of parameters. The Logo and the address are defaulted as Oracle.
Could you lemme knw how shd the logo and the address of the BG be changed?
            Any i/p is highly appreciated.
            Thanks in advance.

Hi Swat,
You need to create your own Custom template.
Just cope the seeded one and change the logo to whatever you want.
How to Register Custom BI Publisher Templates for Use with Oracle XML-based US Payroll Reports (Doc ID 783942.1)
Cheers,
Vignesh

How to setup a release strategy for store generated purchase order

Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2tea

Please go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok

Segments in Check Writer XML data source

Hi,
Can anyone tell me what are the Segments 1-10 in the XML data source that I see for Check Writer (XML) when I use "Third Party Checks". I tried populating few fields in the Entry values for the corresponding element but that didn't work.
We need an additional field to populate some reference number that needs to be printed on the check and we would like to use one of these segments since it eliminates the customization.
- <EMPLOYEE_THIRD_PARTY_PAYMENTS>
<ORG_PAYMENT_METHOD_ID>63</ORG_PAYMENT_METHOD_ID>
<PERSONAL_PAYMENT_METHOD_ID>103704</PERSONAL_PAYMENT_METHOD_ID>
<CHECK_DEPOSIT_NUMBER>166986</CHECK_DEPOSIT_NUMBER>
<SEGMENT1 />
<SEGMENT2 />
<SEGMENT3 />
<SEGMENT4 />
<SEGMENT5 />
<SEGMENT6 />
<SEGMENT7 />
<SEGMENT8 />
<SEGMENT9 />
<SEGMENT10 />
<PRE_PAYMENT_ID>4077062</PRE_PAYMENT_ID>
<VALUE>151</VALUE>
<PREPAYMENT_ASSIGNMENT_ACTION>1363042534</PREPAYMENT_ASSIGNMENT_ACTION>
<ORG_PAYMENT_METHOD_NAME>TP Bethesda</ORG_PAYMENT_METHOD_NAME>
</EMPLOYEE_THIRD_PARTY_PAYMENTS>

Ok..found it. Those are the bank details.

How to Read and Write .XML datas (HELP Plz...)

hai everybody
how to read and write xml datas... plz give clean and simple example..
bcoz me want to produce such type of module...
if any one help me .. thats the only way me laid in software ladder
plz....
thank u in advance

thank u for giving idiot..
but before posting i search in google also..
but i cant get what me expect..
thus i posted...
then who is ................?
sorry javacoder01
// plz help me
Message was edited by:
drvijayy2k2

Check Writer (XML) - where to customize?

Hi everyone,
I have to add mailstop to the check writer (xml) process and it looks like it pulls the information from what is archived. Unfortunately, mailstop is in our system, but is not included in the archived data.
I feel as if I'm not the only person who has to add an additional field to their checks, so how have you done this?
At this point I am unable to even find the name of the package that pulls in the data to produce the XML output.
Can anyone out there let me know how their developers have added additional data to use in the check output?
Thank you in advance!
-CC

Hi,
Please see if this thread helps.
How Can We Change Number of Earnings on XML Checkwriter
How Can We Change Number of Earnings on XML Checkwriter
Regards,
Hussein

How to setup a company code for material management

Hi,
While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
So can you help me , how to setup a company code for material management
Help is appreciated
thanks
DIL

Hello Sendil,
You can maintain it with trns code OMSY or MMPI/MMPV.
Hope this helps
Regards
Arif Mansuri

How to setup a global artwork for a TV Show

Hi, I've a TV Show composed by 45 episodes where each one have his artwork but I don't know how to setup a global artwork for the TITLE of the TV Show while retaining the 45s artworks.
ie. when watching the Tv Shows (library on iTunes) I would like to see the global artwork of the Tv Show that is different of the other 45s episodes contained.
Bye, Roberto.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

How to setup a default direction for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
Thanks.

This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

How to setup a default size for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

How to setup the Airport Extreme for PSP?

Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
PowerBook G4 Mac OS X (10.4.3)

Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

How to setup Check Writer (XML) for Canada?

Similar Messages

Maybe you are looking for