How to setup checkman in 7.01 system

Hello colleagues,
I need to setup checkman for system that is 7.01.
Currently I am using ATC on 7,30 systems and I dont have a lot of expirience with checkman.
The problem is that we have to run all the checks one by one on classes and function modules.
I need to set it up for a group of packages and make it run on scheduled basis.
In checkman_a I cant see a way to set a check on a group of classes or objects.
Please help.

Hi,
If You Want to Cosnume Enterprise Services From Enterprise Service Repository In Webdynpro Of NWDS CE 7.1.
Gothrough Below Blog.
How to Consume an Enterprise Service from the ES Workplace in Web Dynpro in the new SAP NetWeaver Composition Environment 7.1
in the above blog contains the video of consuming Enterprise Services From ESR into Webdynpro.
The Below 3 Links Have Step by Step Procedure For Calling Enetrprise Services In Webdynpro From ESR.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2076831c-efce-2910-7582-ff2b4495d81b?prtmode=navigate
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0eeea30-f1ce-2910-c180-d5758441de56?prtmode=navigate
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50038f8d-fbce-2910-e289-92154874ab4a?prtmode=navigate
Thanks
Subbarao Chinta

Similar Messages

How to setup workplace message in SAP system

Hi Experts,
how to setup workplace message in SAP system.
when am logon SAP GUI i am getting mesage of Document workplace. ( you have one new document)
saying that in Inbox i have 1 document.
my client they dont want Receive that pop up message. thy want receive document but no pop up message .
where can i do customize thia i hope there was a T-code for this.
Thank INadvance,
Anthyodaya.

Hi,
Go to transaction SBWP and Click Distribution list and choose the list where you can find one check box send express. you just deselect the check box and save it. After that you will not receive any express note . but you will get messge to your inbox.
Regards,
abi

How to setup a MDK in our system

Hi all,
I have downloaded the file MDK.zip. There are a lot of files in it. Please suggest me how to install it in our system.
Thanks
Sanket sethi

hi,
refer this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/mobile/mobile-infrastructure/mobile%20development%20kit%202.5/content/eclipse/guideeclipse.html
antd this link refers to the configuration of MDK
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/com.sap.km.cm.docs/library/mobile/mobile-infrastructure/mobile%20development%20kit%202.5/content/eclipse/eclipsemdkwizardsconfiguration.html
Regards
Manohar
Edited by: Gouri Manohar Gadhamsetty on Jan 5, 2009 8:35 AM

How to setup EWA for non-ABAP system with SM 4.0 ?

Hi, we are running SM 4.0 with the support-stack 06. I have set-up a solution for monitoring which includes a NW04 WebAS 6.40 Java only system. Has anyone set-up EWA reports for this type of non_ABAP system who can advise of the steps necessary for this ?
It seems like you need to define RFC destinations for where the monitored system data should be collected from , but there doesn't appear to be anywhere to do this for non-ABAP systems ?
I have looked at Note 738676 - Service Data Download for Non-ABAP Components but it hasn't helped and it seems to be SDCC specific, rather than SDCCN.
Thanks.

Hi Andrew,
we are just developing it, at the moment you have the following option, your java system has to send by ccms agends its data to an ABAP 640 system or higher, there you can see its alerts in ccms, then you have to make both system available in SMSY. Then important you have to assign the java system as a system component, then we collect also the java data and shows them in the EWA of the ABAP system. There for go to the main instance tab and set a java main instance to relevant and assign your java system.
This is the old, available standard solution. At the moment we develop it also for java stand alone.
I think it will be available with the new ST-SER in autumn
Regards,
uDo

How to setup the connection between non-unicode client and unicode server?

hi.
we played the program in 4.6x that call a data from unicode server (ECC6.0) to non-unicode server. ( not played in the unicode server.)
When a program ended that English Character was normal, but Korean Chinease... was unknown text.
I think conversion from unicode to non-unicode is a main reason.
General Notes are issued for the unicode side rfc connection configuration.
but, i want to know how to setup into the non-unicode system to interface with unicode system.
I hope your great answer.

Hi,
For taht you have to deploy korean and chinese langauges seprately on non unicode system.Then try to connect to the unicode system.It will work for you.
Regadrs
Vijay kumar

How to setup a BW test system?

Hi
We are having R/3 and now we are planning to install BW. Now a few questions are coming to us like...
1. In what cases we need a test system? Can we bypass test system and have development and productive system only?
2. How to setup a test system? Should we reload data from R/3 test system or can it be sourced from BW Productive system (in order to get more historical data)?
3. Has anybody setup a test system and loaded data from BW Productive system before?
Any suggestions will be highly appreciated.
Regards,
Pundit

Hi Arjun,
It is depends on client, for eg:say if client follows Sixsigma processes, then give much importance on Quality. So in this scenario it becomes much clear to have Quality box, If for other clients who don't have much Quality processes in place. you can take up the Quality (test) in Development box itself.
And it also depends on data you want have test on. For some clients they move much of their historical data for testing purpose..
Also some clients mainatain all 3 boxes(Dev,QA & Prod.)in sink..so that it would be easy for any changes or whatsoever.
Hope this helps...
Best Regards,
DMK
*Assign points if it helps...

How to setup System propterty in 10g EM

Can anyone tell me how to setup System property in 10g EM or any system config file?
My existing application has following code to access System property:
this.logDir = System.getProperty("ServletLogDirectory");
My current application server is oas 4.0. I am upgrading the application from oas 4.0 to 10g.
Thanks in advance
Don

On the OAS Control's OC4J section, there is a place you can set the OC4J instance server settings. You can create certain number of JVMs and their runtime properties.

How to setup the system monitoring using sol man ?

Experts
can any one advise me how to setup the below monitoing.
Background jobs (SM50)         - Long running jobs >24hrs
Email/Fax transmission(SCOT) - alert if there is any failire/errors in the email transmission
iDocs Processing(WE05)          - Data Transfer failure
Enque locks (SM12)         - alert if there are any Lock entries which are older than 2 days
Update Records(SM13)         - alert if there are any update request older than 90 days
Regards
Karthi

Hello Prasad
Thanks a lot your information. I wil go thorugh the documents which you have mentioned.
I have configured few alerts and unfortunately I am still struggling to configure these alerts. I am also not able find whether I will be able to configure these alerts are not. Any advice/tip would be a great help.
if I get some solution, definately I will share with all.
Regards
Karthi

DCNM5.2 as NX1010 VSB: How to setup system time or NTP?

Hello,
We installed DCNM 5.2.2c Virtual Service Blade on a Nexus 1010. But we are not able to find how to setup time or NTP neither from GUI nor from the NX1010 CLI. Do we need to touch the virtual appliance for time settings?
Steffen

What is the best way to do that?
Use ethernet.. performance of wireless is never as good as ethernet.
What wifi channel need choose to?
There is no such thing as the best channel..
Leave everything auto.. and see if it gives you full download speed.
Use 5ghz.. and keep everything up close to the TC for the best wireless speed.
If you are far away it will drop back to 2.4ghz which is slower.
Once you reach the internet speed nothing is going to help it go faster so you are worrying about nothing.

How do I clone a fully operational system that relies on Windows 7 for the underlying operating system?

I'm a retired IT professional desiring to assist a friend who owns a small business who recently experienced very malicious attacks on her computers from unknown parties operating anonymously on the Internet. Because
of her lack of preparation for such events, her future ability to continue to conduct her business was seriously threatened. The incident revealed, to my friend, the need to be prepared to deal with spontaneously occurring problems that create suspicious conditions
that arise with modern computer software before they can be analyzed in a sufficiently comprehensive manner to have an opinion regarding the appropriate course of action for obtaining a permanent remedy. In that, the ability to quickly react on the basis of
only suspicion is the goal.
I want to recommend an approach that involves maintaining an offline image of an operational system that is capable of running any of her computers. This image needs to include all of the software required to run
her business. In that, it is not limited to the operating system. This single image could then be used to restore any computer to a known reliable state should the need arise. This technique will also insure that each computer has sufficiently similar capability
to allow them to substitute for each other. Insofar as image restoration is itself an operation susceptible to causing unacceptable business delay I'm also recommending that each of the identical computers (i.e., from a hardware perspective) operate in a multi-boot
environment where a virtually offline backup can be instantiated via a simple reboot (i.e., an operation that all users of the Windows operating systems turn to when strange behavior is first observed). My intention is to limit the cloned system (i.e., partition
or C: drive) to the operational software. The business data along with storage for temporary data will be isolated on other partitions (i.e, mounted with other drive letters) accessible by each instance of the software eligible for multi-boot operation.
This kind of operation is something that I know how to setup on older versions of the Windows operating system. However, Microsoft has now dropped support for all of those operating systems and my much more limited
experience with the currently supported operating systems reveals that changes to the boot process will necessitate making changes to the specific preparations needed to build such an environment.
Before recommending that my friend replace all of her computers with new ones, that includes paying for new operating system (i.e., Windows) licenses, I need some assurance that the new operating systems are as
good as the old ones in this respect. These need to be relatively inexpensive desktop computers and we're only talking about a few of them. Let's say fewer than half a dozen. My friend is a sole proprietor and even though her business has become completely
dependent on what was once called personal computers she must operate on a fairly tight budget. This especially includes the budget for technology.
The articles I've been able to find on the Microsoft support websites seem to treat multi-boot as a situation where someone is running different versions of possibly difference operating systems whereas my need
to produce a single image that will both run on multiple computers as well as multiple partitions on the same computer. I'd appreciate finding some technical advice that applies to building such a system using a supported version of Windows.

I tried the image creation/restoration described by Jared. I don't think it makes much sense to rely on an operational system to do such a restoration therefore I opted for method 3 which involves using a "System Repair Disk". My first
reaction is what a crude tool. The image creation process had no trouble putting the image on a simple network share. However, it appeared as though the restoration couldn't even connect with the device. I then copied the files to a USB drive.
In this case the repair disk said it couldn't find the files even though they were there. It offered no mechanism to even look and see what was there. It appears as though it will only find the image if it is located in a folder by the certain
name used on creation and it is in root directory. Not very handy.
As ugly as all that was when we finally come to the point of making the restore it looks like the only option is to restore the entire disk, which in my case would mean also restoring both the windows partition and the recovery partition. This just
isn't what I want to do. It is also something I wouldn't even consider doing unless it was the only possible way to recover from a failed hard drive.
In summary, unless I've completely failed to notice how it works that just isn't going to work.
I hope there is something better than this. What about WinPE and ImageX?
Absent anything useful from Microsoft it will be necessary to try using other software. Time to try Acronis! I guess.

How to setup multiple content servers on one host

Hi,
We have setup 2 ECC 6.0 systems on one host ECC DEV and ECC QAS. Windows 2003 Server 64bit
We want to setup 2 standalone Content Servers (MaxDB). One contentserver pointing to ECC DEV and one to ECC QAS. Containing its own content.
Problem is that I was not able to set up 2 content servers on one host because in ISS i could only create one default webservice during installation.
To my opinion it must be possible to setup 2 standalone content servers on one host, question is how?
Can anyone help me how to proceed?
Many Thanks!
Best regards,
Jacco Raymakers.

Hi Jacco
You cannot Configure Two Content Servers on IIS( One Sigle Hardware).
As this Content Server you have configured can be used by both ECC DEV and ECC QAS.
There is no need of two content servers.Same Contentent server can be used by ECC DEV and ECC QAS.
Configure Content Repository and Content category diferrent for ECC DEV and ECC QAS.
I hope I have answered your query.Please let me know if helpfull.
With Regards
Mangesh Pande

How to setup Charms in a 2 tier landscape ?

Hi All,
We have a two tier landscape i.e only having development and production system so how to setup STMS and all other settings in this type of scenario.
Can we use Virtual system in STMS as a Quality system ? If yes then please guide us and tell me how to proceed as if we dont know how to add virtual system in SMSY in solman. Please provide us with a clear picture and give us detail documentation if possible.

Hi All,
Please tell me as per the SAP standard recommendation is it necessary to have a cycle like DEV->QUAL-PROD for Charms as we are not having any Quality system or Client here in our landscape.
Please suggest a way how to proceed in this case. Please help me out.

How to Setup Historical DSC Database on a standalone Server

Hey @all,
I am looking for documentation how to setup a standalone server for the DSC Module(Ver. 8) Historical Database.
My aim is to log all data to this server. The Server will be running Win2K.
Do I have to install the complete Labview 8 software and the DSC Module?
Does a walkthrough exist how to setup a DSC server?
Thx!
Carsten

After installing the runtime you should only have to reboot the computer in order to get the citadel service running. At the point, for citadel purposes, this machine will behave as though you had the DSC development system installed. The 8.0 runtime has no setup requirements...it should only need to be installed. Unlike previous versions, 8.0 requires you to build your application into an executable and the runtime should be invisible to you once you install it. If this is not the case, please post about it so it can be looked at.
If you have specific questions, please post them and I will either try and help you find the answers, get them posted, or answer them myself.
Regards,
Robert

How to Setup JMS in Siebel Server

Hi
Currently we have a Requirement to work with queuing System from JMS Queuing
How to Setup the JMS Queuing from Siebel Point of view?
Does JMS Should be Installed in Siebel Server?
Plz Provide Inputs for How to Set up the JMS Queuing Mechanism and Setting up the Queues for Posting and Receiving the Messages from JMS Queues
Thanks & Regards
Rajendra Prasad

Update - it works ! At least I can connect to Mountain Lion (not server) from my iPhone using the VPN Server Configurator app.
Here's what I did :
1) download the app and install
2) setup using the help files on the web page : http://www.greenworldsoft.com/product-vpn-server-help.html
3) at the last stage you need to setup port forwardin on your router
4) under Airport Utility 6.0 you cannot setup ports 500 or 4500 due to BTTM conflicts but setup the other 2 ports (1723 TCP and 1701 UDP), update airport extreme
5) download Airport Utility 5.6 from here : download already extracted utility it is in it's extracted form as is necessary under Mtn Lion (thanks to NetUse Monitor for the download - great app by the way)
6) run 5.6 and setup port forwarding (Advanced-Port Mapping) for the other 2 ports (500 and 4500 UDP), update airport extreme
7) that's it, I was able to connect to the VPN from my iPhone !

How to setup word docs, converted to PDF on local drive with links to a second file at a page

how to setup word docs, converted to PDF on local drive with links to a second file at a page
Need to setup a set of word documents, converted to PDF that has links from one file to a second file at a given page.
I would like to setup a set of pdf documents, on the hard disk of a PC or Mac, that can be open with acrobat pro running on the same computer and have the link jump to, and open in a new window, in acrobat pro, to a given page of a second document in the set.
Is there a way to setup a link in word and the conversion to pdf that will result in a link that is equivalent to the acrobat link type you get when you add a link of the type Go to a page in another document?
Tools-Advanced Editing-Link tool, make a box
Check: Go to page view, Next (Create go to view dialog opens)
Open second document and go to page
Click “Create go to view dialog” to set up link
Result is a link, when view by link properties, with an action of
Go to a page in another document
File: C:\My Documents\second file.pdf
Page: 43
Zoom level: Custom
I got close but did not solve the problem:
I have a version that uses links to a website, using #page=43 at the end of the hyperlink.
That works but will only open to the page if is through the web browser, opening the acrobat reader plugin.
I need to open from a folder on the local harddisk (with relative links), in acrobat pro to the given page of the pdf, on a PC or a Mac.
I could bookmark each page “pagenumberxxx” and jump to the bookmark/page if that would get around some problem
Current Systems in use to create documents with links and view them:
Windows XP SP3
Word 2003 SP3
Acrobat 9 pro version 9.4.4
Or just to view them:
Mac OS 10 Lion version 10.7.4
Acrobat 9 pro version 9.5.1
(note I have limited understanding of Mac’s)
John

No. There seems to be no automated way to do it. You can of course go into the PDF and manually add links after you have converted to PDF, but that is what we want to avoid having to do. We want it to be automatic from the Word doc.

How to setup checkman in 7.01 system

Similar Messages

Maybe you are looking for