How to setup cloud in ipad2?

I am trying to configure cloud in ipad2. Can someone help me?

When you are in iBooks - click on the collections button and make sure that you are looking in the right place for the PDF. If you can't find it, you can try restarting, resetting the iPad or quit iBooks, restart the iPad and look again.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
To quit iBooks - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If none of these things work try dragging and dropping the pdf onto the section under the Library heading on the left side of the iTunes window. Then go into the Books Tab of iTunes and make sure that the pdf is checked to sync and then sync. It should transfer to iBooks.

Similar Messages

  • How can setup the outgoing email for ipad2?

    How can setup the outgoing email for ipad2?

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
     Cheers, Tom

  • How to setup real SFTP in Yosemite?

    There's lots and lots of information online about how to setup remote access to my mac using SSH and SFTP in Yosemite...but apparently none of it is actually useful for genuinely  remote access...access from outside my network, access from miles away.  Because here is what I have learned:
    The ip address listed in the Sharing pane when you access remote login is internal.  it's some version of 192.168.x.x, which is essentially everybody's computer and utterly useless from outside the network.
    So my actual public ip as assigned by my service provider is really my IP if you are trying to get to my computer from outside.
    But that IP doesn't "just work" via SSH or, much more importantly for me, SFTP.  Evidently that involves something called "port forwarding" which one used to be able to do via Airport Utility, but is no longer possible because such options do not exist in the current version of the utility.
    (What I want to achieve is for a friend of mine, a friend on a mac about 4 miles away,  to be able to directly access very large files on my computer. I don't want to use clouds or public sites or anything like that, I just want to be my own private little FTP server just for her. That used to be no big deal.)
    So... is there a solution for this?

    Dropbox may be a better option if you can both have accounts with enough storage, it is a simple setup process that can be forgotten about.
    Bittorrent sync is another option that mirrors data between several endpoints. You should get better performance if the files are not being transferred over the network (Dropbox & Bittorrent sync create copies at each end).
    ssh & port forwarding allows you to use sftp, if you do some more setup you can also use sshfuse to mount the remote content as a network disk, it's a plugin for http://osxfuse.github.io
    Just be aware that many scripts & botnets are constantly attempting to login on visible ssh ports on routers across the internet. Enabling ssh to outside access means that any user on you Mac can be a potential login - have good passwords set on ALL user accounts, and do not enable the root account password. There are also options to disable passwords in ssh (& use ssh keys only) if you want better security.
    ssh is good, but it is not trivial to setup and it won't open ports for you. Apps like bittorrent sync can use UPnP to request port forwarding rules, to make setup easier.
    Back to My Mac is OK, provided you are willing to hand over the keys to your Apple ID.
    P.S. You keep mentioning ftp, please avoid ftp. ftp can use plain text passwords that can be sniffed over the network, avoid opening the network to inbound ftp traffic too.

  • I need instructions on how to setup officejet 8500g

    I need instructions on how to setup officejet 8500g
    This question was solved.
    View Solution.

    Hello Steve1869,
    You may want to re post your question on the "Other printing questions" forums or visit "Hp Support" which will have the printer manual  for better results as these forums relate more to iPrint,ePrint, Print Apps, Google Cloud Print and other web services.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • How to setup stack files on desktop

    I just got my first macpro and accidently blew away my stacked files that were located on bottom rgt corner of screen. could not find in trash so do not know where it went ... just know that while dragging this stack across screen and released it I saw a cloud icon then it was gone. anyone know how i can get it back or how to setup a stack again...should be easy?

    Items in the Dock are just aliases (shortcuts) to the actual files/folders somewhere on the computer. I can't remember exactly what is on the right side by default, but probably the Downloads folder or the Documents folder.
    If you want a stack in the Dock, just drag a folder from the Finder to the Dock and the OS will make an alias to the folder in the Dock. When you drag off the dock, you are deleting the alias to the item. if you control-click or click on hold on the folder in the Dock, you can choose the display options that you want it to have.
    Stacks only exist in the Dock. You can't move them to the Desktop.
    If you want an alias to a particular folder on your Desktop, cmdoptdrag the folder to the desktop. While you are dragging you will see the alias badge (a swooped arrow) indicating you will create an alias, not move the file/folder. Keeping things on the desktop takes up lots more resources than other folders, so it is not a good idea to put a lot of items there.
    Message was edited by: Barney-15E

  • How to setup "Back to My Mac" on iCloud.

    Does anyone know how to setup Back to My Mac on iCloud? I never had MobileMe, and all the instructions I find online are for MobileMe. It seems like a really cool concept, though.
    The computers I have are a Mac Pro and a Macbook Pro. Both running the latest update of Lion.

    I've done that. It goes through as if there are no problems, but I still can't use it. Also, when I try to login using my apple ID, it doesn't work. I've gone to the Airport Utility and tried setting up my apple ID with the mobile me tab, but it asks for my me.com username and password. I never had a password for it, because I setup using cloud. I put in my apple ID password anyway, but there is still no luck. It tells me my username or password is incorrect.

  • How do I activate my iPad2 and signup for 3g?

    I bought a refurbished iPad2 wifi+3g (Verizon) from Apple instead of through Verizon because I got it at a discounted price.  I would like to activate 3g service and pay for one month.  How do I go about doing this?  I didn't see any instructions included with the iPad on how to setup a data plan.  Thank you. 

    Holy crap I finally figured it out!  Apparently I was calling the wrong number, and had to ask specifically what I needed.  If you purchase your iPad from Apple (new or refurb), you need to call 800-256-4646 and press 1.  Tell then you are interested in activating your iPad mobile broadband and you want to 1gig $20 pre-paid plan.  They will transfer you to the right department.  When you get on the phone with the CSR, ask for a tech.  If they wonder why tell them you have an iPad 2 Verizon model you bought from Apple and need to activate it on their network so you need to submit your MEID.  When you get to the tech, tell them what your MEID is (setting, general, about), and they will check to see if it is in their system.  If it is not, the tech will need to submit it, and the process take about 72 hours.

  • I want to know how to setup password expiry notification for outlook 2013 and 2010 in office 365

    On cloud mailbox non federated how set password expiry notification for all users which is created on cloud for accepted domain mail box only configure outlook, 
    any other option on exchange admin center for the same,
    I want to know how to setup Outlook 2013 and 2010  to receive PASSWORD EXPIRY NOTIFICATION without log  in domain,

    Hi
    As per the information and details provided by you, to set up password expiry notification, please follow these steps: -
    I suggest you run Office 365 desktop apps reffering to the steps below: -
    Step1: - Login to Office 365 Portals.
    Step 2: - In the right pane, click
    Downloads under Resources.
    Step 3: - Click Set up under
    Set up and configure your Office desktop apps.
    Moreover, please confirm the password policy by the
    PowerShell cmdlet.
    Step 1: - Install Micrsoft Online Services Module and connect to Office 365.
    Step 2: - Run Connect-Msolservice command.
    Step 3: - Get a password policy by the following PowerShell cmdlet:
                    Get-MsolPasswordPolicy –DomainName yourdomain.com
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G 

  • How do i add my ipad2 to find my iphone on my computer? it has been stolen and my find my iphone doesnt have it on the devices.

    How do I add my iPad2 to find my iphone on my computer? it has been stolen and find my iphone doesnthave my iPad2 device on it.
    HELP!

    It's a bit too late for that. You needed to do that before it was stolen.
    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • How does Creative Cloud for teams work with staff who work in two locations ie in the office/home

    How does Creative Cloud from teams work with staff who work in two locations i.e. in the office and home?

    There is no difference please be aware that each login is provided with two activations however.  If you wish to have a computer at both work and home activated though that is perfectly fine as long as your employer is ok with using company software at home.

  • How to setup three SharePoint sites on one server?

    Hello,
    How to setup three SharePoint sites on one server?  I have three sites like:
    http://site1
    http://site2
    http://site3
    And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure.  Can you advise on what to change?
    Thanks,
    Paul
    Paul

    you need to make entries in DNS to get this done.
    check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
    nice blog with step by step explanation:
    http://thuansoldier.net/?p=1323
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • How to setup multiple base station under one network?

    How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

    One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

  • Why can't I login with my Apple ID when I try to setup Cloud on my MacBook Pro?

    Why can't I login with my Apple ID when I try to setup Cloud on my MacBook Pro?
    thanks,
    Simon

    First question that I am not clear on your answer about: Is the Apple ID itself a valid email address, and the same one that you have as your Primary email address on your account? If the actual Apple ID is not an email address, then that is why you are not able to sign on to iCloud or to verify it....it must be an email address.
    If it is an email address then:
    Update your OS to the latest version - 10.8.5
    Once you have updated, reboot the Mac and then go to Preferences>iCloud and try to sign on with your Apple ID again.
    Check Manage your Apple ID to make sure that your Apple ID/Primary email address is verified.
    If the problem persists, contact iCloud Support to see if they can provide you with an explanation of the meaning of the message. If the Apple ID has already been verified, then I'm not sure why you would be getting this messge:
    https://getsupport.apple.com/Issues.action
    Cheers and best of luck!
    GB

  • How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

    Hi All,
    Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
    I have all the required documents like
    1. Oracle Application Server Portal Server Configuration Guide.
    2. Oracle Application Server Web Cache Configuration Guide.
    3. Oracle Application Server SSO Administration Guide.
    I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

    The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
    Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
    SSL to OracleAS Single Sign-On
    SSL to OracleAS Web Cache
    SSL Throughout OracleAS Portal
    External SSL with Non-SSL Within Oracle Application Server
    For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
    Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
    Regards,
    Pete

  • How can I connect my ipad2 to a projector to show videos on a screen?

    How can I connect my ipad2 to a projector to show videos on a screen?

    http://store.apple.com/us/product/MC552ZM/B

Maybe you are looking for

  • Need help with boot problem: Intel ME unconfiguration in progress

    Hello, several months ago I had an accident at work and spilled A LOT of water all over my T400...  so much that the laptop just powered down on its own (i guess those keyboard spill guards were overwelmed LOL).  I let it dry for a couple of days, an

  • SCCM 2012 R2 - Architecture problem/ Suggestions???

    Hello I have to build architecture for SCCM on 2012 R2 such the plan this below. I suggest 1 primary site installed in the protect zone with a SQL 2012 Server in the secure zone. The customers will have no access to the primary server because custome

  • Why no disks listed for time machine

    I got my MACBOOK yesterday. When I ran time machine for the first time. it shows: A storage for time machine backups isnt set up. I clicked "set up time machine" , and click: choose backup disk. Howeve, none disks are listed, neither the internal HD,

  • Rollover submit

    I need help getting an over image (searchbuttonover.jpg) code for this to work, and yes I've already tried the behaviors window it's greyed out! <input name="searches" type="image" id="searches" src="searchbutton.jpg" alt="submit"/

  • Intermittent broadband connection hertfordshire SG...

    Hi For the last few weeks my 'high speed' broadband infinity service has been intermittent at best, at worst unavailable for long periods overnight, and in the last few days has just been dropping in and out of availability completely Could you expla