How to setup DBI for SCM?

I need DBI setup guide for SCM & DBI develpment guide (i.e. Dashboard,Ad-hoc reports,DrillDown) one of our biggest client POC?
Regards,
Mukarram

You probably want Fusion Intelligence for EBS in order to take advantage of the integrated Siebel Analytics Dashboards:
Oracle Fusion Intelligence for E-Business Suite Implementation Guide
http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120fieig.pdf
Install and configure OBIEE per the installation guide below:
Oracle® Business Intelligence Infrastructure Installation and Configuration Guide
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf
Otherwise, use the DBI installation guide for setting up DBI:
Oracle Daily Business Intelligence Implementation Guide
http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120dbiig.zip
If you are using ASCP in your SCM environment, there are some cool new OBIEE based Control Centers in the controlled release of 12.1 for ASCP:
12.1 APS Installation Notes
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=727535.1
Oracle Advanced Planning Command Center Release Notes. Release 12.1
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=566094.1

Similar Messages

How to setup variants for webdynpro report in ABAP? Help!

Hi Experts,
I have a webdynpro for ABAP report with selection screen.
How to setup variants for webdynpro report in ABAP?
Thanks
Gopal

Hi Gopal,
There is no concept of Variant in Webdynpro ABAP. But in our project we have some tool to do that. Its not release to the client I think. In my scenarieo, We create the Screen variant and program name will be supplied to the tool that will generate the ouput in PDF and Selection screen in One view. But the same is not avilable .
If you want the same concept in Webdynpro ABAP, you need to go for Dynamic programming only. This is the only option is avilable.
Warm Regards,
Vijay

How to setup QoS for IP/Mac Address WRVS4400N

I need some help setting up QoS for two Cisco/Linksys devivces on my network.
Network devices are Comcast SB6120 modem into WRVS4400n (v2.0.2.1 firmware) that divides into one 24 port gigabit Netgear unmanaged switch, 1 port into AT&T Cisco Microcell, 1 port to HP Officejet 7700 wired printer. Unmanaged switch has approx 10 devices attached (including another 8 port unmanaged gigabit switch). 3 static leases are defined for the network for three devices (HP OJ 7700 printer, Cisco/Linksys PAP2 VOIP adapter, windows home server v1. DHCP is handled by WRVS4400n. Comcast service provides 12mbps of service upstream, 4mbps downstream.
Need to setup QoS for AT&T Microcell and PAP2 VOIP adapter. The real issue that I can't figure out how to configure is IP based priority access. I can do rate control for an IP address but can't figure out how to specify priority control for an IP.
Here are my the current config questions:
1. Bandwidth management page: For the microcell device plugged into port 1, do i set the default CoS to 4 or 1?
2. Bandwidth management page: Should the bandwidth management type be set to priority? I assume yes since I need to define the UDP/TCP ports for priority. The major issues here are
a) one of the ports the Microcell uses is secure https (TCP 443) which is could also be used by any other internet device.
b) can't specify priority for the PAP2, since it's behind the unmanaged 24 port switch
3. QoS setup page: Do I need just 2 queues (one for the port ID for the Microcell and one for the IP address of the Linksys adapter)?
4. QoS setup page: I assume I need to define DSCP for the unmanaged switch but not sure how to tie a queue to an IP address
4. QoS setup page: Shoud priority 0 be set for the most important queue (microcell) and the priority 1 CoS be for the VOIP adapter? Again, not sure about how to define priority by IP address.
5. DSCP setup page: As far as I can find, there's no documentation on how to setup this page.

That's what I do. I keep it simple, one calendar, one set of contacts.
iCloud is really the simplest way to go, as it will sync your (eventual) single Contacts and Calendar across all your devices.
I would:
Figure out which single calendar (in Calendar.app) and contacts (in Contacts.app) that you want to keep.
I'd make a backup of each one. For example,
in Contacts, File > Export... > Contacts Archive...
in Calendar, File > Export... > Calendar Archive...
Make a backup of the other calendar events and contacts that you want to save.
delete all the contacts and calendars from your phones and your iPad.
add the contacts and events from the backups to the single calendar in Calendar.app and your contacts in Contacts.app on your iMac. There is probably some way to export the contacts and events you are adding, and then combine them, but you could also just add them manually.
Then when you configure all your devices for iCloud, they will be all synced automatically.
Message was edited by: arthur

NewbieQuestion: How to setup OCCI for Visual C++ 6

I'm new to OCCI and Visual C++, Please help to illustrate how to setup OCCI environment for Visual C++ 6
Thanks in advance

Check make.bat under %ORACLE_HOME%\rdbms\demo on how to compile OCCI programs in Windows. OCCI samples can be found in %ORACLE_HOME\rdbms\demo and in :-
http://www.oracle.com/technology/sample_code/tech/occi/index.html
Regards,
Shankar

Two printers with different paper sizes. How to setup defaults for each?

I have two printers connected to my beloved Mini: Samsung ML-1610 & Epson AccuLaser C1100.
First printer uses American Quarto US Letter paper.
Second one - European A4.
Every time I try to print anything on either of them I receive a message from printer driver that paper size mismatched. Further more either printer will wait until I press buttons on them to "proceed". Which is very annoying to say the least.
How can I setup defaults for every printer in Mac OS Leopard? If I use printer preferences dialog it will setup either size for both printers rather than for each its own.
Please advise.

PAHU wrote:
You cannot do exactly what you want from a user interface perspective. I am not sure if such a thing is possible by making changes to hidden files. I certainly haven't heard of it but it may still be possible.
From what I have seen, the page setup dialog is independent of the print dialog. If you set the 'Format for' to one printer, a then choose a different printer when you print, the previous settings won't apply.
You could see if the printer set to A4 supports automatic conversion of LTR to A4. Then at least it won't ask for attention when you send a LTR page to it. Otherwise I think your only option is to check before you print that you have selected the correct paper size for the printer.
PaHu
That's freaking ridiculous!!!
You've got to be kidding me... right?
Even MacOS 8 could do this.
Like it's horrible for me because I print a lot of photos. So I set my default paper type Format for: Canon MP610 series, Paper Size: US Letter (borderless). But then when I go home and print web pages or text documents on my Apple LaserWriter 16/600 PS, then it still remains set to Format for: Canon MP610 series. The freaking OS knows what printer I'm using; why would it remain formatted for the other printer even though that will cut off the edges of all my prints (since the LaserWriter does not do borderless printing) -- and not even warn me?! I just wasted 30 pages!
I cannot tell you how preposterous it is that a modern OS like Mac OS X cannot even get a simple thing such as printing correct. How could they screw up PRINTING?!
-Jon

How to setup CTS+ for BODS 4.1 systems

Hi all,
I am trying to setup CTS+ for BODS systems to transport the objects from dev--> QA---> Prod.
I Couldnt find any document which explains about CTS+ for BODS systems.
I have some knowledge on how CTS+ works and worked on CTS + for EP and PI.
Can someone let me know the steps involved in setting up CTS + for BODS 4.1 systems.
Thanks
Vimal.SMR
Message was edited by: Andy Silvey

Hi Vimal,
see if this OSS Note helps:
1762987 - How to configure LCM with CTS+
Kind regards,
Andy.

How to setup SSL for Business Objects

Dear colleagues,
can you help with the following issue: we want to setup SSL for BO and have dedicted information for the implementation of certificates and know that sapcryptolib needs to be used. But there is no information provided how to inform BO about the location of the sapcryptolib. Can anybody provide a hint for this? Many thanks in advance.
Best regards,
Detlef Kreiss (HP Outsourcing services)

Detlef,
The SAP Crypto library is not required if you are simply trying to secure the webserver using SSL.
Securing IIS (.NET infoview, or IIS fronting a Java application server) is pretty simple as you would follow the same steps to SSL secure it as you would any IIS server (there is an add certificate button in the properties of IIS).
If you are using a Java Application server solely and want to SSL secure that, there is an SAP note to describe the steps required to add an SSL certificate to the (Tomcat) Java keystore.
Please see:
1299147 - How to setup SSL on Tomcat in Business Objects Enterprise XI 3.1?
https://bosap-support.wdf.sap.corp/sap/support/notes/print/1299147
-Brian

How to setup dreamweaver for synchronizing website?

Hi, I'm trying to setup dreamweaver 8 in a way that mimics my
online website. The problem I am having is that on my real sites'
server I have placed most of the files outsite the public root
(security reasons), and I'm not sure how to setup dreamweaver so I
can synchronize with this. I am running a WAMP configuration for my
test / development machine.
Online website structure:
some_folder
-source code
- includes files etc..
public_html (document root)
- html files
-images
-css
An example of how my apache virtual host is setup
Document Root: C:\mysite\public_html //This works fine...
If I setup a site in dreamweaver that uses C:\mysite as the
root, the setup resembles the online one. But there is a problem
with this because it uses C:\mysite as the "document root" whereas
the folder C:\mysite\public_html should be the document root. Now
if I change my document root to C:\mysite\public_html then I don't
have access to any of the files above this directory... I'm kind of
screwed with each option I take...

Here are the email server settings that work for me on iMac or iPad using Mac Mail program.
Verizon changed to different email server.
Make sure password for account is correct by resetting password:
Reset password by clicking "I cannot access my account link" on page or login below
https://login.yahoo.com/config/login?.intl=us&.partner=vz-acs&&.lang=en-US&.intl =US&.done=http://hom...
Enter username here to reset password :https://signin.verizon.com/sso/forgotflows
Passwords must match for verizon yahoo & verizon account.
email server settings:
Example
Name: john smith
email address:[email protected]
user name: john smith (Do not use full email address here)
Incoming Mail Server: incoming.yahoo.verizon.net
SSL: on (Port 995)
Authentication: Password
Outgoing Mail Server: outgoing.yahoo.verizon.net
SSL: on (Port 465)
Authentication: Password
user name:johnsmith
Password: current password for account
Save all settings and check for new email. Good luck.

How to setup comis. for future account

our local cuurency is JPY, we configured a future product type 903, the commission is 500 JPY per lot for future, if we buy 3 lots, then it will be 1500 JPY
anyone know the steps to setup commission for future accounts

Hello erinfromla,
It sounds like this article will be useful for you.
iCloud: Set up iCloud Mail on your devices and computers
http://support.apple.com/kb/PH2621
Make sure that you're setting the account up through System Preferances:
"2. Choose Apple menu > System Preferences, then click iCloud and sign in with either your Apple ID (the one you use with iCloud) or your @icloud.com email address."
That should get you up and running.
- Griff W.

E-Recruiting : How to setup ALE for standalone setup

Dear experts,
We are implementing eRecruiting with the following setup:
ECC 603 on a separate server from eRecruiting 603.
I know that in such a scenario we have to transfer the data to & from ECC using ALE and IDOCs.
We have setup RFC connections between both the systems & defined the same in the table T77S0 (both ECC & eRec using HRRCF & DTCBA)
After this can anyone please specify what needs to be done?
I am looking for some kind of detailed information or a reference to any documentation will also do.What are the activities that BASIS needs to take care. Some of the things i am looking for answers are :
What are the BADIs that i need to activate both at ECC & eRec level?
How do i set up or build an ALE model?
How do i decide on the meesage type?
When should i use transactions PFAL & SALE & how do i use it?
How do i check that the data is transferred successfully?
Your inputs on these topics will be appreciated.
Thanks & Regards,
Sowmya

actiivate following badis and enhancespot implementations on e rec server
HRRCF00_SEARCH_RANKING
HRRCF00_DELETE_SPREL
HR_INB_PROCESS_IDOC
these are important for ALE point of view.
Steps for ALE
Go to the Sender HCM system Transaction SALE
Define logical system under basic settings
assign logical system to the client
Create an RFC connection to Erec server with the same name as the logical system name
add the user id and password (use system user with SAP_ALL)
Go to Communication under sale tcode
Determine RFC connection for method calls
Create Standard BAPI and DIALOG destination for the Logical destination
In SALE under modelling and implementing business processes
Maintain distribution models and views
Create Model View
Add a message type HRMD_A for the model view and add the sender and receiver system
Then go back to sale
and in partner profiles generate partner profiles put the model view sender system and user(system user)
go back to sale
goto Maintain distribution models and views
there select your modelview (just hightlight) go to edit->modelview->distribute
in your sender system in T77s0 table for RECFA DTCBA maintain the RFC name of the E-rec system.
Now login to Erec system
There maintain the RFC connection to E-rec system with system user
Goto T77s0 for RECFA HRRFC maintain the RFC name to HCM system.
Go to PFAL transaction in HCM sender system and for the model view/message type you have created send the data to e-rec
Regards,
Divya

How to: Setup AAE for Remote Disk Access & Serve PS3

Hi there,
I've read so many tutorials, and tried so many combinations, but haven't found anything for my specific purpose.
I was wondering if someone might have the insight to do a quick run-through (including specific settings) on how I would setup my Airport Extreme for the following scenario/purpose.
Setup:
1. Netgear DGN2000 ADSL Modem + Router in one
2. Airport Extreme = Model #A1354
3. Western Digital Studio 1TB (mac os extended journaled formatting - not used as time machine)
4. PS3 80gb
*To accomplish:*
1. Access the Western Digital HDD remotely. So I can access my files from work.
2. Use the Western Digital HDD to serve media to the PS3 when I'm at home, so I can watch movies without having my computer turned on.
Caveat:
1. I don't want to use/pay for MobileMe.
Many thanks,
Glen

Hello nelga. Welcome to the Apple Discussions!
Since most of your questions are not really AirPort networking related, I will do the best I can to provide assistance.
1. Access the Western Digital HDD remotely. So I can access my files from work.
I know you don't want to use BTMM, but to best understand the hurdles you will be up against, it might be worth taking a quick look at how BTMM works "behind the scenes" to allow you to access a HDD remotely.
BTMM - Basic Communication Flow
o For a computer connected to the Internet via a router, BTMM "asks" the router for its configuration information. For a router, like your AEBSn, that uses NAT-PMP, BTMM will ask the router to assign arbitrary public ports. In turn, the router will provide these port assignments (& the router's Public IP address) back to BTMM.
o BTMM then sends this information to the MobileMe account. In background MobileMe updates a special set of DNS entries to be used by BTMM. These entries are then made available to all BTMM clients using your MobileMe account. When a computer, with BTMM enabled, uses your MobileMe credentials, it automatically retrieves a list of all other computers/routers that are registered with the same account. All these devices should then appear under the SHARED section of the Finder.
o When attempting to connect to a remote computer (or router), BTMM creates a secure connection to that remote device using the information from the MobleMe account.
o Once the connection is established, the devices can then communicate with each other.
The key to all this is that you will need the following in order to be able to remotely access the HDD:
1) Your ISP must provide you with a publicly reachable IP address.
2) If your ISP provides you with a Dynamic (vs. a Static Pubic IP address), you will need to keep track of that IP address in order to consistently have access to the HDD. Without knowing this address, when your ISP changes it periodically, you will have to manually "retrieve" it to connect again. You can get around this by using a service, like DynDNS.
3) You will have to configure your NAT router for port forwarding/mapping to allow the necessary file sharing communication to pass through the router to the AEBSn with the shared HDD. Specifically you want to open the appropriate ports for both the AFP (TCP: 548) & SMB (TCP: 445) file sharing protocols.
4) Similarly you want the AEBSn to be enable for file sharing.
2. Use the Western Digital HDD to serve media to the PS3 when I'm at home, so I can watch movies without having my computer turned on.
In order to stream video from your WD HDD, you will need a DLNA-compliant Media Server to stream that data to the PS3, which is a DLNA client. With that said, you will need at least one computer (Mac, PC, or Linux-based device) running in order to run this server. The WD HDD has no means to run this server as it has no operating system.

How to setup classpath for the beans?

My packaged beans reference classes in other jars. Right now I have to set up the classpath in the Windows user variables. I think that is not a good way.
Is there a better way to do it? Thanks.
Anthony

Matthew,
Thanks for the advice. Unfortunately the way you sugguested will not work for me because the beans bridge stuff is just a small piece of the system that I will deploy. And I can't ask all the needed jars put into the Java plug-in's directory.
I know there is another way to setup the classpath just for the plug-in's. It is by using the Java Plug-in's console. But this looks work only in a development environment. I don't know how I can automate it as part of a product installation process.
I will deploy an enterpise applicaiton. So far I haven't found a better way to set the classpath than setting the environment variables (which is kind of rude).
Anthony

How to setup rotation for application.log?

In order to get the Portal Performance Statistics running, we need to retrieve the page views from file application.log in directory <ORAHOME>\j2ee\OC4J_Portal\application-deployments\portal\OC4J_Portal_default_island_1.
This file continues to grow and therefore we want to set up rotation, in order to get one file per day.
We are following note 264373.1 and have read all documents and manuals about logging, but can not figure out how to manage this.
Can anyone help us? We are working with 9.0.4.1.
For Oracle employees: see also tar 4193327.994.

I can't speak for how portal uses the log file, but in general, the way you do it for a deployed J2EE application on OC4J is as follows.
Deploy the application EAR file. Lets say the app is called Test.
In the j2ee/home/application-deployments/Test directory, a file will be created called orion-application.xml.
If you look in this file, you will see an entry which looks like
<log>
<file path="application.log" />
</log>
This defines the log file for this application.
Now if you want to setup log file rotation for this app, edit the orion-application.xml file and firstly, comment out the above.
Note: you can leave the log tag in if you wish, but you'll get double log messages. Remove it if you do this in production and are trying to conserve space ;-).
Then add in the below to setup ODL based logging for this application:
<log>
<odl path="logdir"
max-file-size="1000" max-directory-size="10000" />
</log>
What this does it to tell OC4J to output the log messages using it's ODL format model, to create a directory called logdir (in the current directory) and then to start writing to log files called log.xml in that directory.
The max file size of log.xml is 1000KB, and the max directory size of the new logdir directory will be 10MB.
The ODL logging system will manage the log files in this directory according to these constraints -- when a log file gets bigger than max-file-size it gets archived as logN.xml. When the overall directory size gets bigger than the max-directory-size specified, the oldest log file from the list is removed so that the max directory size is honoured.
I don't think we can specify a rollover period (ie one day) with ODL. I'm pretty sure it's just file size based only.
I think the above should apply to Portal since it runs on OC4J. In which case, you'd change the orion-application.zml in the <ORAHOME>\j2ee\OC4J_Portal\application-deployments\portal directory instead of j2ee/home/application-deployments/<app-name>.
However, I can't speak officially for Portal since I don't work with that product. From a pure OC4J perspective the above holds true and works.
cheers
-steve-

Smart forms. How to setup logic for standard text usage.

Hi All!
Could you advise please is there a way, except abap programming, to setup in smart forms that different standard texts values (tcode so10) to be used based on different selected parameters (e.g. customers, vendors etc... ).
e.g.
For picking list smart form:
for customer A- standard text A to be used.
for customer B- standard text B....
Thanks,
Best Regards,
Andrey
Edited by: Andrey Kruglov on Mar 16, 2009 1:30 PM
Edited by: Andrey Kruglov on Mar 16, 2009 1:30 PM

HI,
Refer this thread:
Re: how to display symbols in smartforms
There is a standard smartform for invoice.
LB_BIL_INVOICE.
Refer this thread:
Re: Can anybody plz give me Smartforms print prog for Invoice/PackList
Regards,
Gayathri
Message was edited by: Gayathri Hariharan

How to setup FCE for a sony AVCHD camcorder

Hello,
I'm new to apple and to video editing. I've connected my Sony HDR-XR350 with the imac through USB. FCE 4.0 The camcorder isn't recognized "no name", but i can browse its files (MTS format)
- what option to select in "easy setup"? Apple intermediate codec 1080i50 or 60?
- I've tried both options, but when trying to import files through the log and transfer window i get an error message of "unsupported media"
what am i doing wrong?
thanks for your help!!!
greetings
bart

1080i50. Make sure you make a new sequence after you change the preset.
Read the manual section on log and transfer to explain how to work with this media.

How to setup DBI for SCM?

Similar Messages

Maybe you are looking for