How to Setup deducated server for FR Repoting and Consolidation

Hi experts,
We have an issue where running FR reports slow down HFM for users. We were thinking of dedication 1 server for FR reporting and another for consolidation. I read the 9.3.1 manual and it says it is possible to do that. However, no steps were provided.
Can anyone please shed some light on the steps we need to perform ?
Thnaks a lot for your help in advance

>
Hello!
I have downloaded the SPARC ISOs for Solaris 9 from
sun.com, and I have tried many times to set up Install
server (Solaris 9) for SPARC machines on an Intel PC,
but I always get the following error.
I take it you're running solaris x86 on that intel pc?
bash-2.05#
/cdrom/cdrom0/Solaris_9/Tools/setup_install_server
/export/home/sol-sparc/
ERROR: Install boot image
/cdrom/cdrom0/Solaris_9/Tools/Boot does not exist
Check that boot image exists, or use [-t] to
specify a valid boot image elsewhere.
bash-2.05# If you do a "cd /cdrom/cdrom0/Solaris_9/Tools/" and then do an "ls" do you see the Boot directory? Is there anything in that directory? That's the software 1/2 CD you're running that command from right?
Thanks,
Daryl

Similar Messages

How to setup my account for movie rentals and setup up home sharing in UAE using a local credit card?

Hi
I live in Dubai and just got an apple tv... I've got many friends who have easly connected their apple tv though I am having trouble with it.
I have a local credit card signed within my apple tv ID and I can't use home sharing nor rent movies? !
Please help

Just follow the on-screen instructions and it will be fine. Obviously you need all her settings and preferences though so it may be wise to have her on the phone while you're doing it.

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
Below are the Windows 8.1 client IP Configuration
C:\Windows\system32>ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
   Connection-specific DNS Suffix . : home
   Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
   IPv4 Address. . . . . . . . . . . : 192.168.1.5
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.home:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
   Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
   Default Gateway . . . . . . . . . :
Tunnel adapter iphttpsinterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
   Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
   Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
   Default Gateway . . . . . . . . . :
Below are the IPConfiguration details for Direct Access server
C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
   Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
   IPv4 Address. . . . . . . . . . . : 10.192.1.25
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
   Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
   Default Gateway . . . . . . . . . :
Tunnel adapter 6TO4 Adapter:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter IPHTTPSInterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
   Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
   Default Gateway . . . . . . . . . :
ipconfig exited on MURA01 with error code 0.
Below are the IPCONFIG Details for SCCM Server:
C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
   IPv4 Address. . . . . . . . . . . : 10.192.1.30
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
ipconfig exited on sccm01 with error code 0.
What will be the IPV6 values to configure boundary?

Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to specify Host Server for Replicated Virtual Desktops within RDVH Collection

My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
Now I wanted to make it easy for my users I build a Connection Broker: RDCB
All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
the running ones from RDS02.
How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
Thanks in advance.

Hi Robin,
Thanks for your patience.
After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to setup HTTP client for HTTP to File scenario

Hey guys
i have a scenario wherein one of our clients is sending invoices(as XML message) over HTTP(client is outside our landscape) and i have to to send this invoice to a File system from where it will be picked up by an ABAP code(picking of the file has to be done by ABAper so i m not concerned with that)
the way i m starting off this project is that
i will create a sender and receiver data type,message type and Message interface,Message mapping is 1-1 so its kinda simple and then Interface mapping.
in configuration i wont be creating and sender communication channel and sender Agreement,i need receiver communication channel,receiver determination and interface determination.
does my design and configuration looks good to you guys?
also i waz goin through some threads and it says that i need to setup HTTP client for this scenario and then specify a URL in a specific format.
where will i setup the HTTP client and where will i specify the URL?
thanx
ahmad

Ahmad,
><i>does my design and configuration looks good to you guys?</i>
Is correct.
><i>where will i setup the HTTP client and where will i specify the URL?</i>
Take a look at this thread and check the HTTP Client code.
Copy the code and save it as a HTML file and you have the HTTP Cliet ready. GIve the details of your server, sender service, interface etc and trigger the call to XI.
In a real time scenario, you will need to use the URL used in the HTTP Client code from your WebApplication to trigger the call to XI.
/message/266750#266750 [original link is broken]
Regards
Bhavesh

How to setup the RV120W for quickvpn

Hello,
The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
Thanks for any help

User Guides for thee rv120W are here:
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
and theres some more stuff over on my site:
http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

How to setup SSL cert for SharePoint apps in a three tier farm with nlb

I am having trouble understanding how to setup the SSL certificate on SharePoint apps or in general its configuration

Please check the below thread..
https://social.technet.microsoft.com/Forums/sharepoint/en-US/53465d30-10b2-48c9-9541-5ade738156b4/how-to-setup-ssl-cert-for-apps
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?

Hello IDM-experts,
where can my customer find information about
SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
Customer situation description:
The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
SSO access to the Abap systems via the SAPGui. See screenshot as an example.
Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
this or if it is possible via SAP IDM 7.2.
You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
Kind regards,
Daniela

Do you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
Thanks
Tim

How to configure SMTP server for osb 10.3.1

Hi All,
Can anyone share information on how to configure SMTP server for osb 10.3.1
and then how to send an email from osb 10.3.1
Thanks in Advance!!

Thanks a lot!!
I configured the same way. When I am sending email to an account on the same domain as my SMTP server is the sending of email is successful. But its giving error when I am trying to send an emain to an account which is on different domain. It giving error as "Operation has been cancelled"
Please suggest something.

Hello! My name is Vadim. I'm from Russia. I'd like to buy two iPhones 5, 64 GB: for my wife and myself. But I have a question to you. Will it work in Russia? How much will it cost for me? And how much will delivery cost to Russia? Thank you very much.

Dear Sir or Madame,
My name is Vadim. I'm from Russia. I'd like to buy two iPhones 5, 64 GB online, from your official website Apple: for my wife and myself. But I've a question to you. Will it (iPhone 5, 64 GB) work in Russia? How much will they cost for me? And how much will the delivery from America to Russia cost?
Yours sincerely,
Vadim Fedotov.

iPhone 5 is not available unlocked in US and
Apple Store online does not ship outside the Country it operates
You are best served waiting for the iPhone 5 to be announced in Russia
through your Apple Approved carriers

How to setup oracle database to archivelog mode and auto delete ?

Oracle 11g R2
- How to setup database to archive log mode and have oracle only save 24 hours of archive logs
and delete the rest. So at any given time I will have only 24 hours of archive log and not more.
So only 1 day of archive logs.
- Let me know the database parameters I need to setup to accomplish this.
- I don't want to use the RMAN
- I am not setting up the database to archive log mode for recovery purpose. I am setting up archive log mode
so we can use the log miner tool to dig up achives to see log activity for any performance & tuning.
Edited by: johnpau2013 on May 9, 2012 6:09 PM

johnpau2013 wrote:
Thanks everyone for there responses.
I need to rephrase and explain everyone as what I wanted to do exactly. This might help everyone understand and suggest me.
We have oracle database 11g r2. Its a test database. Nothing is critical. We use EXPDP utility to backup the entire database every night. Which is enough for us to recover incase something happens. Even if we loose some data. That's fine.
We are testing our web application on this oracle test database for performance & tuning.
One thing we have noticed is that the redo logs are switching very frequently. 50MB each log file and there are 5 logs. each log switches every 40 seconds. So we wanted to see what is getting written in this redo logs. We wanted to use the LOG MINER tool in OEM to read the logs. It needed our database to be setup in archive log mode. So the log miner can read the archive logs and show us the sql's within the archive logs.
Now when we setup the archive log mode on our database. By default the archive logs destination was set to flash recovery area ( may be oracle default archive log location is flash recovery area folder).
We have setup the db_recovery_file_dest_size to 100GB. Now within 2 days we have filled up the flash recovery area folder. Database was frozen. Then we realized that its because oracle couldn't write archive logs. Because it reached the 100GB. Then we physically deleted files in the flash recovery area folder. Thinking it would help us start the frozen oracle database. But it didn't . The we realized that we are doing something wrong. As Oracle does not know that at OS level we deleted the files. Then temporarily we changed the db_recovery_file_dest_size to 130GB and were able to start the oracle database. Later we turned OFF the archive log mode.
Being a rookie DBA we would have not read something properly.
Finally:
We wanted to know how to always keep only 1 day of archive logs (only for our performance tuning ) and not more than that. All we need this 1 day of archive logs is to use the log miner to read them. Backup is NOT our priority here. Only be able to read the archive logs from LOG MINER is PRIORITY.
Correct me if I am wrong.Okay, so its making much more sense now, thanks for explaining your requirement.
Database won't honor anything that you would do over the o/s without telling it. Your deletion of the archive log from the o/s location is NOT updated in the control file of the database and that's why, even when you had deleted the entire 100GB , from the db perspective, the space was still marked as used. This is the same which would happen even if you would increase the space from 100gb to whatever size as well. To delete the space, you would need to update the database's control file and that you can do from RMAN using its two commands , crosscheck backup following with deleted expired backup . The first command would find that which database backup files are NOT on the o/s which are shown in the control file and would mark all of them as expired. The second command would simply delete those expired files. This would update the control file and you would have your 100gb or whatever space, given back to you.
To keep the archive logs of just one day, set up that Retention Policy for RMAN to either number of copies using the Redundancy option(default and set to 1) or Recovery Window. I believe for you Redundancy would be a suitable choice but you can have a read and play around with it. Setting it up would mark the files as Obsoleted and finally, you can write a small RMAN script to delete those obsoleted files.
Now, what I don't understand is that why you want to keep on generating the archive logs just for the log miner? If you would have generated them once and figure out the reason for extensive redo generation(did you try increasing the redo log file size, 50mb seems to be smallish) , I don't think that there is any reason to keep on generating the archive logs still .
And last part, for your question asked about that whether we can use RMAN to put the db in the archive log and is it a backup tool, yes and yes.
HTH
Aman....

Snow leopard server for net boot and software updates only what needs to be running to use it?

Snow leopard server for net boot and software updates only what needs to be running to have it work right?

Netboot and Software Update, at its simplest. Mac OS X Server also expects to have functional IP networking and DNS services (somewhere) on the LAN (and if you're behind a NAT gateway, then the DNS server(s) are on your LAN and not out at your ISP), or things get weird. SUS (usually) works out of the box, outside of cases where there's an outbound firewall. Netboot can be more effort to setup, in terms of what you're loading into the clients.

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

How do I disable transparency for the menubar and addressbar in firefox?

How do I disable transparency for the menubar and addressbar in firefox? (This does not mean disable windows aero or transparency in windows 7. A workaround has been posted. Stop spamming threads with disable transparency and aero everytime someone asks about this.)
It is difficult to read.
Edit:
Is there a setting to tone down the Aero usage of the in Firefox 5 so it looks more like Firefox 3.6. Is there a way to do this in the preferences or inside about:config?
I know what Aero is and how to turn it off.
The 2nd reply has images attached show why it is difficult to read. An light spot on a desktop background or an icon can make it very difficult to read. This is the #1 reason why I keep going back to 3.6.

If you are up to tweaking some CSS code in a style see
"Color Toolbar(s) to identify profile (DM*)" -- in http://userstyles.org/styles/9514, and you must read all of the description material understand what has to be done.
It is a style, and playing with the code is what styles are about. You will have to copy the section of code in the description to the bottom of the style for it to be complete to remove additional Aero effects, and choose two or three colors for the toolbars.

How to Setup deducated server for FR Repoting and Consolidation

Similar Messages

Maybe you are looking for