How to setup default country

Dear All,
Can any one tell me how to setup default country as Saudi Arabia as if when ever there is a country selection LOV in the apps by default it will pick Saudi Arabia currently its picking United States.
For example When we try to create Supplier site or Customer site country come as United States whereas it should be Saudi Arabia so
please any let me know how to achieve this.
Oracle apps version 12.1.3
Thanks & Regards,
Hassan

Setting up "Default Country" profile is the right thing to do. (at least in 11i)
Set it at Site level; log out of the application and then come back in.
Since in R12, the supplier screen is web based, can you bounce apache server(s) and then try?
Sandeep Gandhi

Similar Messages

  • How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

    How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

    Hi Bill,
    Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
    I believe I got the answer below:
    To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
    Router, type the applicable Server name and IP address, and then click OK.
    Thank you

  • How to setup default print to landscape in Reportviewer (printmode activex)

    We have an ASP.NET (2008) application and use the ReportViewer Web Control to show a Crystal Report on the client browser.
       - We set the "PrintMode" property to ActiveX in order to print to the client's local printer.
       - We set up the Landscape in Crystal Report Page setup.
       - We also put  repdoc.PrintOptions.PaperOrientation = PaperOrientation.Landscape in the program.
    The problem is when the user clicks the print icon, the report prints in portrait, not landscape.
    Is there a solution for this or is this a software limitation?
    Thanks.

    How to setup default print to landscape in Reportviewer (printmode activex)
    Hi David,
    Yes, I tried that 1196969 solution first, but it didn't work.  I saw all the discussion in the below thread and it seems a product issue mention by you on Aug 6, 2008 3:19 PM
    CrystalReportViewer default PageOrientation  ASP.NET VS 2008
    I don't know if the fix works for CrystalReportWebFormViewer4 which is what we have on the web server. I put debug alert in the Javascript of the following file
    WindowsMicrosoft.NETv2.0.50727ASP.NETClientFilesCrystalReportWebFormViewer4crystalprinthost.html
    I can see the call goes to the file, but won't get to the window.dialogArguments.paperorientation condition.
    When I write out: window.dialogArguments.paperorientation; it pops up "undefined".
    Is there any updated solution for CrystalReportWebFormViewer4?
    Thank you!!

  • How to change default country in contacts

    I use Korean lang in Ipad in USA.  In my contacts defaulted country code in Korea.  How to change it to USA as default?

    https://discussions.apple.com/message/16474985#16474985

  • Hello  Guru's,  How to setup default value to a field

    Hello Guru's,,
    will anyone guide me the procedure how to setup a default value to a field in mm01 SAP STD Transaction.
    example: material description  ' xxxxxxx ' , it should be constant for all materials.
    full points for the answer
    PV

    Hi,
    Pls look into it
    These are the way to set the default values.
    Step 1 :
    CONSTANTS : P_MAKTX TYPE MAKT-MAKTX VALUE 'DESCRIPTION'.
    STEP 2:
        SET PARAMETER ID 'MAT' FIELD 'DESC'.
        CALL TRANSACTION 'MM01' AND SKIP FIRST SCREEN.
    If it is useful reward points.

  • Two printers with different paper sizes. How to setup defaults for each?

    I have two printers connected to my beloved Mini: Samsung ML-1610 & Epson AccuLaser C1100.
    First printer uses American Quarto US Letter paper.
    Second one - European A4.
    Every time I try to print anything on either of them I receive a message from printer driver that paper size mismatched. Further more either printer will wait until I press buttons on them to "proceed". Which is very annoying to say the least.
    How can I setup defaults for every printer in Mac OS Leopard? If I use printer preferences dialog it will setup either size for both printers rather than for each its own.
    Please advise.

    PAHU wrote:
    You cannot do exactly what you want from a user interface perspective. I am not sure if such a thing is possible by making changes to hidden files. I certainly haven't heard of it but it may still be possible.
    From what I have seen, the page setup dialog is independent of the print dialog. If you set the 'Format for' to one printer, a then choose a different printer when you print, the previous settings won't apply.
    You could see if the printer set to A4 supports automatic conversion of LTR to A4. Then at least it won't ask for attention when you send a LTR page to it. Otherwise I think your only option is to check before you print that you have selected the correct paper size for the printer.
    PaHu
    That's freaking ridiculous!!!
    You've got to be kidding me... right?
    Even MacOS 8 could do this.
    Like it's horrible for me because I print a lot of photos. So I set my default paper type Format for: Canon MP610 series, Paper Size: US Letter (borderless). But then when I go home and print web pages or text documents on my Apple LaserWriter 16/600 PS, then it still remains set to Format for: Canon MP610 series. The freaking OS knows what printer I'm using; why would it remain formatted for the other printer even though that will cut off the edges of all my prints (since the LaserWriter does not do borderless printing) -- and not even warn me?! I just wasted 30 pages!
    I cannot tell you how preposterous it is that a modern OS like Mac OS X cannot even get a simple thing such as printing correct. How could they screw up PRINTING?!
    -Jon

  • How to Setup Default Page Size for Multiple Printers

    I've got two printers, a laser printer for printing "normal" 8 1/2 x 11 pages and a Zebra label printer for printing 4x6 shipping labels. I have my laser printer set as the default printer with a default paper size of US letter. Whenever I go to print shipping labels on my Zebra printer, I switch the printer in the Print dialog box and it always defaults to a paper size of "Full Bleed 8 1/2 x 11". Is there any way to change this setting so that it defaults to "4x6"?
    Another interesting thing is that if I temporarily set the Zebra printer up to be the default printer, none of the paper sizes that are "appropriate" for this printer appear in the default paper size popup menu. It looks like the choices are only those that would make sense for my laser printer. But when I go to print with my label printer, I can choose all sorts of "appropriate" sizes from the dialog box, including the "4x6" size that I use.
    Any ideas?

    Stop the queue (or take the printer offline manually), queue a print job, and check the settings on the submitted job using the CUPS interface; see if you can get the print job "captured" in the queue, and then see if the job is asking for the page size.  Based on what you're describing, I'd guess that whatever application or tool you're printing from is specifically requesting the page size, and not defaulting it.

  • How to Set Default Printer Just for Safari

    I use 2 printers.
    One prints paper docs etc.  The other prints labels only.  When i want to print the labels I have to select that printer in the print dialogue in Safari every time.  Super annoying.
    IS there a way to set a gedault printer just for Safari?
    I tried using the localhost:641/admin method and all i get is Bad Request  (the localhost address i mention here is not the actual version as i cannot remember it now, but it was something like that)
    Using safari 6.0.2 and osx 10.8.2

    Please see these docs.
    How To Setup Default Printer for a User. [ID 153927.1]
    How to Set Up a Default Printer for a User Within Oracle Applications [ID 1018856.102]
    How To Define a Default Printer? [ID 1237254.1]
    How To Setup Default Printer For Applications [ID 184109.1]
    Thanks,
    Hussein

  • How to setup a default direction for new divs in fluid grid layout in dreamweaver?

    Hi,
    how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
    Thanks.

    This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
    The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
    A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

  • How to setup a default size for new divs in fluid grid layout in dreamweaver?

    Hi,
    how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
    This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.

    Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
    Here is the specific page http://foundation.zurb.com/docs/components/grid.html
    The default values are
    Em-base : 16px
    Row width: 62.5em (62.5em x 16px = 1000px)
    Columns per row: 12
    These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
    In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you.

  • How to setup the default run page in WAR file

    Can anyone please tell me how to setup the default run page in WAR file using JDeveloper? I want the login page to be the default page of the application. Thanks!

    This is usually done in an .XML or other configuration file based on the particular web application container you are using.
    For example, in Tomcat Java Container, its the following parameter in the /conf/web.xml file:
    <welcome-file-list>
    <welcome-file>index.html</welcome-file>
    <welcome-file>index.htm</welcome-file>
    <welcome-file>index.jsp</welcome-file>
    </welcome-file-list>
    You will need to look at the documentation for your server container.
    thanks

  • How to default country key in FD01/FK01 (Customer / Vendor Creation)

    Hi gurus! I just noticed that in one of our systems (development) the country key has a default value. Can anybody please help me how to do that in our UAT system? Thanks
    Edited by: Patrick on Jan 31, 2008 9:41 AM

    Hi,
    If ou want to make a default County key in Customer / Vendor Master then select the parameter id of countery key ie "LND" and set it in
    System>User profile> Own data > Prameters.
    Give the parameter id and value of the country key. After saving it logoff and again log in to check whether this field display with default country key given by you.
    Assign points if this helps and resolved.
    JBC

  • How to setup a Default Playlist to Airport but allows BYOD playlist override?

    Sorry for the unclear description.
    Here is what I am trying to accomplish.  I have my laptop or ipod playing a default playlist to my Airport express attached to my Stereo system.  The music plays fine with no issues.  I come into the house and want to play music from my iphone or ipad, I cannot connect or play to airport express since it is already sync'd or acquired by my laptop.
    My goal is to have a default playlist playing all the time.  When myself, my kids, or anyone comes in to house they can have priority over my laptop to play their music.  Then when they disconnect, stop playing music, or leave the house; the default playlist kicks back on and continues to play out the speakers via the airport.  I am trying to do this without human manual interaction.
    I can do all of this manually like disconnect laptop, new device syncs to airport, then when they leave manually start playlist.  But I am trying to figure out how to do this dynamically without human interaction.
    Any ideas or solutions on how to get this to work?
    Thanks!
    T.

    Hello,
     I'm either blind or over-worked (probably both) but I can't seem to find how to setup a DMZ on the XTM 330. I need to add an Avaya IP phone system and don't want to try using SIP because the vendor said they need no NAT.
    Can someone please either direct me to the correct spot in the documentation or tell me how to do it?
    Thanks in advance
    This topic first appeared in the Spiceworks Community

  • How to set default currency and Country in R12 financial modules

    Hi all,
    How to set default currency and Country in R12 financial modules (AR,AP,GL,FA,CE) becuase I found some default settings are shown "USD" & "United States" such as create AR Customer, the Country is shown the default "United States"....
    Can anybody advise ?
    Thanks & Regards,

    Hi,
    Change the below profile for the user to a territory different than the US :
    In System Administrator, navigate to Profiles -> System.
    Select Site, Application, and Responsibility.
    Profile options:
    Default Country
    HZ: Reference Territory
    ICX: Territory
    Regards,
    Raju.

  • I bought my ipad in us, and has been using a purchasing applications. Now i already went back to bahrain, i am trying to purchase apllication using my bahrain credit card but it cannot get through as the default country is USA.   I tried

    I bought my ipad in us, and has been using a pre paid card in purchasing applications. Now i already went back to bahrain, i am trying to purchase apllication using my bahrain credit card but it cannot get through as the default country is USA.
    I tried to change my country but a message says i have a store credit balance and must spend it before changing store. But how i can spend it i only have 8 cents left?
    So how will i be able to purchase applications if i am in bahrain?

    You can try again after a few hours after waiting and you still get the same error, you'll need to contact support.
    https://expresslane.apple.com/GetproductgroupList.action

Maybe you are looking for

  • Iphone music won't show up on my iTunes

    Hi so I just got a new laptop for xmas and when I plug my iPhone 4 completely updated into my iTunes also updated, itunes recognizes the iPhone but only has the actual iPhone icon rather than the usual music and playlists underneath. I have recently

  • How to find number of lines in an internal table

    Dear all, how to find number of records present in an internal table.

  • Cannot play music purchased under old apple id after new hard drive installed

    Replaced crashed HD and used Time Machine to restore to 10.7.5. Had changed my Apple ID a while backe (couple months). Now music purchased with old ID will not play, asking me to authorize under old ID, have no idea what the password was and the emai

  • Unknown column name: annee

    Hi, I have a error message. My request is good but in my program java, annee is a unknown column name. SELECT DISTINCT round(wbdate/10000,0) AS annee FROM EUROF400.FICLIB.IE02 WHERE WBETAT=:etat ORDER BY annee DESC String l_annee=mod.getIe0211().getB

  • Change location and plant for Internal Goods/services

    Hi all, I want to change the plant and location information of product/material for SC item selected from Internal goods/services. I am changing the plant and location -  ( partner function 75 ) in  doc change badi but its getting reset to originial