How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

Hi Bill,
Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
I believe I got the answer below:
To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
Router, type the applicable Server name and IP address, and then click OK.
Thank you

Similar Messages

How get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?

Hi,
I have a RVS4000 router with DHCP enabled and in router mode.
The LAN is 192.168.2.x. The RVS4000 static IP address is 192.168.2.8
The router is not the RVS4000 and is at 192.168.2.1
The RVS4000 dhcp is assigning it's clients a default gateway of 192.168.2.8 instead of what I want 192.168.2.1.
How can I get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?
Thanks

Hi Gail, you cannot do this. The router, as the DHCP server will only assign a default gateway of what IP interface the DHCP server runs on. If you have the default IP, the gateway is 192.168.1.1. If you create a second vlan, by default it would be 192.168.2.1.
There are not configuration options for the built-in DHCP server. If you'd like to expand this functionality, you would need an external dhcp server.
-Tom
Please mark answered for helpful posts

I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?

I am selling my Mac Mini. I recently purchased OS X Lion. When I restore to factory settings, how can I ensure that the operating system will still be Lion, and not the original operating system, which I believe was Snow Leopard?

If you bought Lion from the App Store, you can't legally or practically transfer it, because it's tied to your Apple ID. Reinstall the original software from the discs that came with the machine.

How can i copy a picture that has been installed with the flash player

how can i copy a picture that has been installed using the flash player

You can't. You can take a screen cap of it, but the container doesn't allow access to the individual images used in a SWF or FLV.

I start the computer, there will be a progress bar in the walk, to go on automatic shutdown. What is the reason? How can I do?

I start the computer, there will be a progress bar in the walk, to go on automatic shutdown. What is the reason? How can I do？

Hold down Command-R to get to Recovery_HD, a special Volume on your Hard drive that has some Utilities and an Installer.
Start Disk Utility.
Select you boot drive and click "Repair Disk".
Post any error messages.

How will find my Iphone work on an Iphone that has no service

How will find my Iphone work on an Iphone that has no service and it locked so if someone found it they would not be able to connect it to a wifi source.

http://support.apple.com/kb/HT5818
Great link giving you peace of mind that at least they will not be able to use it with out your AppleID and Password.
According to the "Lost Mode" anytime the device is turned back on or able to receive a signal the phone will lock itself down and it's position will be updated to show its last known location.
http://support.apple.com/kb/PH2700

How do I retrieve my iphoto library from the Time Machine back-up drive, when the original iphoto library was on a separate external hard drive that has crashed?

I recently backed up my iMAC and Simpletech external hard-drive to a 1 TB WD Passport external hard drive, using Time Machine's back-up utility. Today, I tried to access my iphoto library from the back-up drive, but received a message saying "the iPhoto library is a Time Machine back up, and so cannot be used as the main library. Relaunch iPHoto with options key held down to choose another library." Since my Simpletech died on me, what other iPhoto library is it expecting me to access? I know approximately 169 GB were backed up, and my iPhoto library is roughly 54 GB.
Angie in Charlotte

Thanks. I will try going through TM. Since my Simpletech is on the way out, I'll be plugging in a new external hard drive (other than the back-up drive) and trying to restore the library to the new drive. Any advice or warning if this is NOT the right thing to do?
Meanwhile, that is a great tip to do an alternate back-up using a different means. It's been tough to figure out how to "preserve access" to digital images and files for posterity, knowing the hardware will always fail/obsolesce sooner or later, and that "clouds" are only as good as their consistent and reliable accessibility. Upping the odds with redundancy will help dull the edge of my "access anxiety", though logically, it can never relieve it. Will look into
Carbon Copy Cloner.

How to Setup Batch Management Level (Material vs Client)

Hi Experts,
I had a question about the level at which I should be setting up Batch Management. The requirements that we have are:
- We want uniqueness in the batch being created.
- We have split valuation active at the Batch Level.
Hence, we have nailed down to the following 2 options: 1. Client level or 2. Material level. (I know that I will not be using Plant level because we do a lot of STO's and we do not want to lose the characteristics in the Batch at the plant level. So the plant level is out of scope.)
Client Level: Although the client level gives us the uniqueness and supports most of our requirements, my fear with going at the client level is that it is too rigid and MAY cause problems in the future. Is that true? What would be issues/ concerns that you have faced when you have had Batch Management activated at the client level.
Material Level: If I setup the system at this level, I would like to be able to create a Batch number for a material across the entire client only once. E.g. MAT1 can have BATCH 123 only once across the whole client. MAT 2 can have BATCH 123 but the Material# and the Batch # uniqueness should be maintained thoroughly.
I would like to try out this level but my problem is I am unable to understand and setup this level completely. I have gone through some pretty good discussion on this topic but still am unable to understand it thoroughly. The link to this discussion is (http://www.sapfans.com/forums/viewtopic.php?f=27&t=80407). If you refer to this link, it says u2013 Client/ Material Level. What does client/material level mean? Can you please help me understand it. Also, if I setup Batch management at this level, I would like the system to auto-generate numbers for me exactly as I have mentioned above. Is there a way to do so? I was trying to setup the BATCH_MAT number range object with the batch level at Material level but the system seems to always default to the BATCH_CLT level and give us numbers. Is there a way to fix the system to check the BATCH_MAT number range object and give the batch numbering per my requirements. What happens if I use the Material Level Batch management with BATCH_CLT number range object?
Your help is highly appreciated.
Edited by: TV_SINR on Jul 16, 2010 8:52 PM

Check following customizing:
Logistics General --> Batch Management --> Specify Batch Level and Activate Status Management
If you want to change the batch level, you have to start conversion to activate the change.
Note that you cannot reset conversion from plant level to a higher level, read the documentation for customizing of
"Specify Batch Level and Activate Status Management".
If you want to work with same batches for different materials, you should use "Batch unique at material level".
Logistics General --> Batch Management --> Batch Number Assignment
Here you can define how the system should create batch numbers.
Best Regards, Dirk

How to setup iCloud account?? I have a valid apple id but it is not taking the same account for setting up iCloud account

I have a valid apple account which i use to access/download apps from iTunes Store, but the iCloud is not accepting the same account, does I need something extra to access iCloud Service.

Can anyone please help me with this issue

I have apple TV and i am trying to connect it to the TV, it tells me to turn on the homesharing, but under the home sharing shows a different email address than the actual itunes account. how do i fixthanks it?

i just got an Apple TV. i am trying to connect my itunes to the tv, it tells me to turn on the homesharing on my computer but when i try it show up a different email address than my itunes account, how do i fix so i can do homesharing?

It is quite possible to have a different iCLoud AppleID from the iTunes one - have you set up maybe Phot Stream using an non-iTunes AppleID?

WHENEVER i LOAD ITUNES i GET A POP UP STATING THAT iTUNES HAS STOPPED WORKING AND NEEDS TO CLOSE. wHEN wINDOWS FINDS THE PROBLEM, THEY WILL NOTIFY ME. tHIS HAPPENS ALL THE TIME. i UNINSTALLED AND INSTALLED TWICE AND IT STILL HAPPENS. HOW DO I CORRRECT

I keep getting a pop up on Itunes when I try to add a file saying that ITUNES HAS STOPPED WORKING AN NEEDS TO CLOSE. W indows will notify me when corrected. iuninstalled and reinstalled 3 times to no avail. how do i fix?

a further message box states that Data Execution Prevention has closed the program.
Try updating your QuickTime to the most recent version. Does that clear up the DEP errors in iTunes?

How can I configure an outgoing server that has a different password than the rest of my email account?

I have a work email account where the password for my incoming server is different than the password for my outgoing server. I cannot find how to change this in the outgoing server settings on thunderbird. Any help would be very appreciated!

Try to add another SMTP server using correct password then tell the mail account to use that smtp server.
* Tools > Account settings > Outgoing Server (SMTP)
* click on 'Add'
* enter a Description so you can easily tell which server this is.
* enter server details.
* userbame = full email address
* password = correct smtp password.
* click on OK
Then tell your mail account to use that smtp server.
* select the mail account name in left column
* bottom right section 'Outgoing server (SMTP)
* click on drop down and select the smtp server you just added.
* click on OK to save changes to Account Settings.
Note: Account Settings can be located via various methods:
Menu Bar
* Tools > Account settings
Mail Toolbar:
* menu icon > Options > Account Settings
FolderPane:
* right click on mail account and select 'Settings'

TS1398 My wireless router failed and I had to purchase a new one. My security on the new one will not allow me to use the same password. I entered a new password, but of course it is not on my ipod or ipad mini . How can I enter new password ?

My wireless router in my home has failed. I purchased a new router, but it will not allow some of the characters which I used for my old password. Therefore I cannot access the internet with my ipad mini or my ipod touch. I am unable to change the password on either device. How do I go about changing the password on these units so that I can access the internet? Thanks
Terry Beckingham

http://www.apple.com/support/appleid/contact/

My computer shut down and I had to erase everything. Now I only have my music from my CDs on my iPod. And no longer in iTunes as before. How do I save all the music on the computer? will new music from iTunes erase the old?

my computer shut down and with help from Appel it turned out that I had to erase everything . Now I only have my music from my CDs on my iPod. And no longer in iTunes as before. I do not have backup :-(
How do I save all the musicfrom the iPod on the computer?And if I buy new music from iTunes will it erase the music allready on the iPod ?
iTunes no longer recognise my iPod.
I hope someone can help!
Best Maria

See Recover your iTunes library from your iPod or iOS device.
tt2

HT4628 How can I delete a network from my system preferences? My wifi keeps trying to connect to a network that has been disable.

We have disabled an old network in our home and installed a new one. My computer keeps finding the old network, but I have no connection as it is disabled. I have set the new network as my priority, but it doesn't seem to be working. I would like to delete the old network, but can't find how to do it.

Try going to system preferences/network. Unlock the padlock if locked with your admin paswd.
Click on Locations, at the bottom of the drop down menu select Edit locations, this should bring up the list of networks, highlight the one you wish to delete and click the minus button, it should disappear. Click done.
Hope this helps

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

Similar Messages

Maybe you are looking for