How to setup DISK SPACE alert on OEM 10g Grid Control...

Gurus,
I am trying to setup DISK SPACE notification / alert thru OEM 10g Grid Control, but so far no luck.
Can someone help/guide me on how to achieve this?
Please advice.
Thanks & Regards,
Kartik

Those two links don't say anything about "DISK SPACE ALERT" I already know how to setup notification. I suppose you are talking about Filesystem Space Available (%)
If you need to setup an alert (Notification) then i suppose you need to setup an notification rule.
Yes, these notes do not have the key word "DISK SPACE ALERT" you are looking for, but if you go through the first note CLEARLY and COMPLETELY, you should find your answer.
And he has given an example for Filesystem space available in this note, which is what you are looking for.(I think so)
Say for Disk Space, you create a notification rule for target hosts and have metric "Filesystem Space Available (%)" defined in that rule.
If you aren't talking about notifications and just want to setup an filesystem space available metic, then follow this note:
How To Setup Host Metrics For Filesystem
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=749341.1

Similar Messages

Install of OEM 10g Grid controll on windows break my listener

Hi!
I install OEM 10g Grid controll to Windows 2000 server, successfully (a new database to the repository also was created by the installer).
When I restart our server the service of the Listener did not started (it was set to automatic) and I did not able to start it.
First I see the "Listener.log" and the trace file.
The problem was that the listener intended to load adapter protokoll and refer to the "orantcp9.dll"!
Because before the install I create a 10.1.0.2 database the path of the file point to the "Db_1\bin" and here is "orantcp10.dll" exists.
The "orantcp9.dll" is exists in "em_1\bin".
What and how can I fix?
An additional question : during my secont installation I select to create the repository into an existing database, but the installer refuse it because my DB version was 10.1.0.2 and not 10.1.0.3.
How can I create DB with 10.1.0.3 version on Windows?
I am in a deadlock :-)
Regards,
Imre

Try MetaLink Doc Id 284680.1
The issue was that the EM Grid Control created an ORACLE_HOME environment variable. All you have to do is delete the variable, move the Database Oracle Home entries in the path to the front, and reboot the server.

Configuration Assistant failed during OEM 10g Grid control installation

Hi i got an error while installing OEM 10g Grid control 10.2.0.2.1 on Windows 2008 32bit server.
Installation of OEM 10g was successfull but during configuration im getting an error "ORA-12560: TNS: protocol adaptor error". hence configuration assistant get failed to create emrep database. i stopped the TNSListener service and started db creation using DBCA again i got the same error. please find the below logs from db10g/cfgtoollogs/cfgfw
INFO: oracle.assistants.dbca:About to execute plug-in Oracle Database Configuration Assistant
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant is running
INFO: oracle.assistants.dbca:Launching CmdExec
INFO: oracle.assistants.dbca:ExitCode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant executed as attached=true in separate process with exitcode=1
INFO: oracle.assistants.dbca:The plug-in Oracle Database Configuration Assistant has failed its perform method
Note: i got one more error during installation which is "Failed to initialize OCR" and "OS error in starting service OracleCSService"
INFO: Calling Action ntServicesActions10.2.0.3.0 ntStartService
selectedNodes = null
serviceName = OracleCSService
INFO: Exception thrown from action: ntStartService
Exception Name: StartIndeterminate_OS_ErrorException
Exception String: OS error in starting service OracleCSService
Exception Severity: 0
please provide me the solution.

[http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/toc.htm]
[Enterprise Manager Grid Control Installation and Basic Configuration|http://download-uk.oracle.com/docs/html/B12012_03/toc.htm]
http://blogs.oracle.com/AlejandroVargas/gems/GridControl10gR2Install.pdf
HTH
Anantha

OEM 10g Grid Control Problem

Hi,
We installed the OEM 10g Grid Control in Serparate Host..
Installed 10.2.0.1 grid control
and patched upto 10.2.0.3 for OMS....
here OMS version is 10.2.0.3
grid Control Agent Version is 10.2.0.3
and Repository Home is 10.2.0.1
Installed the linux Grid control agent 10.2.0.3 in target database...installation was successfull....but Target database is not showing in the grid control ..what was the problem...

where to check the log files in target database host..do u mean that...
i installed agent on target database home in a seperate directory...
ORACLE_HOME is the Target Database Oracle Home
cd $ORACLE_HOME/agent10g/sysman/log/
is it the correct directory to check the log files..i am new to this grid control...
=========================================================
$cat emagent.trc
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:05 Thread-5947399 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:08 Thread-5980167 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:38:35 Thread-5996551 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:05 Thread-6045703 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:39:35 Thread-6078471 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:05 Thread-6111239 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:40:35 Thread-6176775 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:05 Thread-6209543 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:41:35 Thread-6242311 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:05 Thread-6275079 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:18 Thread-65541 ERROR command: nmejcn: received no status header from repository at http://gridserver.abc.com:4889/em/upload/
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:35 Thread-6340615 ERROR pingManager: nmepm_pingReposURL: Did not receive a response header from repository
2007-08-19 12:42:42 Thread-6406151 ERROR upload: Error in uploadXMLFiles. Trying again in 900.00 seconds or earlier.
================================================
$ cat emctl.log
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: Processing start agent
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm: EMHOME is /u02/targetdb/10.2.0/agent10g
15709 :: Sun Aug 19 11:42:29 2007::AgentLifeCycle.pm:status agent returned with retCode=1
15709 :: Sun Aug 19 11:42:36 2007::AgentLifeCycle.pm: Exited loop with retCode=3
16405 :: Sun Aug 19 11:48:23 2007::AgentLifeCycle.pm: Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:Processing status agent
16405 :: Sun Aug 19 11:48:23 2007::AgentStatus.pm:emdctl status returned 3
19862 :: Sun Aug 19 12:02:42 2007::AgentLifeCycle.pm: Processing status agent
19862 :: Sun Aug 19 12:02:42 2007::AgentStatus.pm:Processing status agent
19862 :: Sun Aug 19 12:02:43 2007::AgentStatus.pm:emdctl status returned 3
20326 :: Sun Aug 19 12:04:05 2007::AgentLifeCycle.pm: Processing status agent
20326 :: Sun Aug 19 12:04:05 2007::AgentStatus.pm:Processing status agent
20326 :: Sun Aug 19 12:04:06 2007::AgentStatus.pm:emdctl status returned 3
20404 :: Sun Aug 19 12:05:41 2007::AgentLifeCycle.pm: Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:Processing status agent
20404 :: Sun Aug 19 12:05:41 2007::AgentStatus.pm:emdctl status returned 3
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:Processing upload
21329 :: Sun Aug 19 12:16:36 2007::AgentStatus.pm:emdctl status agent returned 3
21329 :: Sun Aug 19 12:16:38 2007::AgentStatus.pm: emdctl upload returned with exit code 6
21685 :: Sun Aug 19 12:22:59 2007::AgentLifeCycle.pm: Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:Processing status agent
21685 :: Sun Aug 19 12:22:59 2007::AgentStatus.pm:emdctl status returned 3
22464 :: Sun Aug 19 12:40:17 2007::AgentLifeCycle.pm: Processing status agent
22464 :: Sun Aug 19 12:40:17 2007::AgentStatus.pm:Processing status agent
22464 :: Sun Aug 19 12:40:18 2007::AgentStatus.pm:emdctl status returned 3

Trying to install OEM 10g Grid Control agent on Windows Server 2008 x64

Received the following when trying to install OEM 10.2.0.2 for Windows 32 bit. I believe Windows 64 bit version does not exist. I have installed this on 2003 x64 in the past.
Error message:
Checking operating system version: must be 4.0, 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Is there a workaround or a version that will install on 2008 x64?
Thanks.

This will give you the complete picture of Grid Certification.
Oracle Enterprise Manager 10g Grid Control Certification Checker
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
10.2.0.4 Agent is certified with 2008 64 bit.

OEM 10g grid control using an existing database

Hello all,
Has anyone been successful in installing Enterprise Manager 10g Grid
Control (10.1.0.3) using and existing 10g (10.1.0.3) database?
10g grid control comes with 9.0.5.0 database for it repository. Since
this respository can not be update to 10.1.0.3, Oracle recommends using
and existing 10g database instead.
My installation goes 90% all the way before it fails. It fails at the
create repository point.
If any one has been successful, could you please share your success
with me.
Thanks,
Jake

Well, finally I did it! :)
The problem comes when you are trying to install OEM repository into existing 10g DB which used to be configured with a standalone Database Control. Dropping SYSMAN user is not enough!!! There are some leftovers which must be cleaned before running repository creation assistant:
drop user SYSMAN cascade;
drop user MGMT_VIEW cascade;
drop role MGMT_USER;
drop public synonym MGMT_TARGET_BLACKOUTS;
drop public synonym SETEMVIEWUSERCONTEXT;
That's all folks.

How to know what *.exe is called my notification in OEM 10G Grid Control

Our Port 25 is blocked. and the security does not want to open the port 25 for the machine. He wants to give exact .exe file the permission which executes the email..
Do you guys what exe is called for email notification ?
Thanks
Atul

You can get all the default Grid Control Ports in Metalink Note Note:235298.1 -
Overview of Default Ports Used by EM 10g Grid Control, DB Control and AS Control

Oem 10g grid control agent secure fails with error

When trying to secure the agent from one of the server it fails with the below error. If any one had faced this issue or know of the problem can help.
emctl secure agent password
Oracle Enterprise Manager 10g Release 10.2.0.1.0.
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent successfully stopped... Done.
Securing agent... Started.
Requesting an HTTPS Upload URL from the OMS...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/eml/sec/emd/GetSecPort
Done.
Requesting an Oracle Wallet and Agent Key from the OMS...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/eml/sec/emd/GetWallet
Failed.
Failed to contact the OMS at the HTTP URL set in /apps/apsp1/oracle/emhome/agent10g/sysman/config/emd.properties
The Agent has not been secured.

Failed to contact the OMS at the HTTP URL set in /apps/apsp1/oracle/emhome/agent10g/sysman/config/emd.propertiesDid you check that? It seems configuration file 'emd.properties' points to a URL, which cannot be resolved.
Werner

OEM Database Control and 10g Grid Control

Can any one tell the difference between OEM Database Control and OEM 10g Grid Control.

Database Control is the HTTP Management environment and comes installed with the 10g Database. It can be used to manage one database (one target) at a time (standalone). To monitor more than one database, you must create a new console on a different port for each database.
10g Grid Control is the Enterprise version in that you can monitor different Target from different operationg systems at the same time. These include Application Servers, Listeners, Operation Systems, Non Oracle Database Systems using plugins (from 10gR2).
So, for someone who was using OEM 9i, there was connection in to Standalone Console (Java) and Oracle Management Server (Java and HTML). In 10g, they are replaced with Database Control (Java and HTML versions) and Grid Control respectively.

Reports for Low disk space alerts in scom 2007

Dear Experts,
Is there any possible to get the Low disk Space alerts reports in SCOM 2007 R2.
1, I need reports for Last week SCOM sent alerts on Low Disk space for the servers list
2, Likewise I need SCOM Low disk space alerts reports for last month.
Can somebody please explain me with the steps and I played much with Reporting pane.
Thanks,
Saravana

Hi,
The below code should work to get all servers that have alert of logical disk free space is low in specific period:
get-alert -criteria 'Name = ''Logical Disk Free Space is low'' AND TimeRaised >=''3/24/2014'' AND TimeRaised <= ''4/24/2014''' | select MonitoringObjectDisplayName,MonitoringObjectPath,Name,TimeRaised | sort MonitoringObjectDisplayName
Here is a similar thread for your reference:
how to create a report showing the servers that had the alerts of "Logical Disk Free Space is low" for a specific period?
http://social.technet.microsoft.com/Forums/en-US/50f2c3fb-2dfc-47c6-8c2a-8a2f0149df10/how-to-create-a-report-showing-the-servers-that-had-the-alerts-of-logical-disk-free-space-is-low?forum=operationsmanagerreporting
Regards,
Yan Li
Regards, Yan Li

Tempro v2 - changing threshold for disk space alert

Hello,
I have downloaded and installed Tempro v2 on a Satellite A200. It is running fine.
However, tempro has a problem that was present on the version 1.x .
The low disk space alert is set to trigger, way, way too early at 25% disk space left on any partition. On a modern disk this is around 15GB. This is way , way too early to be told of a problem. I have swiched off this alert - which I don't want to do. There seems to be no way (that I can find) to set this alert to trigger at a more sensible value - say 10% disk space left or a given amount of disk space left - say 2GB.
Is there a fix for this or have I missed how to set this value as I don't want to run without knowing I am running low on disk space? Getting this alert at 25% is irritating.
Thanks
Clive

Hi
I dont think that you could change this value or settings
Tempro sends the notifications about the status of the whole HDD and therefore you have received this message.
Ive got this tool on my notebook too but didnt find any settings which would help to disable the notification about single partitions on the HDD

How to monitor disk space in BW

can some body help me out on the following issues.
1)How to monitor disk space in BW?
2)How can I delete Application logs in BW?

When I research with DB02 transaction code in BW, I encountered following tables having lot of log , please some body can help me, how to delete the following log data?
ARFCSDATA     ARFC Call Data (Callers)
BALDAT          Application Log: Log data
BSRWBSTORE     Storage for binary large objects (Excel)

Reg: how much hard disk space required?

hi expert's
i am planning to install netweaver(bi 7) in my desktop pc. so how much hard disk space is required for this. what are all the hardware requirements needed?
regards
harikrishna N

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2

How much hard disk space remains?

Sorry, the Missing Manuel for Lion isn't available until the end of the month, but I have a lot of basic questions.
With Snow Leopard when i opened a Finder window at the very bottom of the window pain was information on how much memmory was being used by whichever folder I had opened. I know I can hit Tab to have a window pop up and tell me, but I liked that old feature built into the Window. Is there a way to change the setting back so that when I open a finder window I get a reading on how much hard disk space is being used by X file?

Select Show Status Bar from the Finder's View menu. As far as space used by any one file that is listed under the Size column in the Finder when using List View.

How to view disk space information

How to view disk space information in CLI

Perhaps you can share the output for the command ipcheck.
You should get an output like:
esalab.cisco.com> ipcheck
Ipcheck Rev           1
Date                  Mon Jun 18 10:43:20 2012
Model                 C150
Platform               (8066)
MGA Version           Version: 7.5.2-014
Build Date            2012-03-06
Install Date          2012-05-03 08:36:10
Burn-in Date          Unknown
Serial No.            001D09F09F6B-7xxxxx1
BIOS Version          A02I
RAID Version          02
RAID Status           READY
RAID Type             1
RAID Chunk            Unknown
BMC Version           1.70
Disk 0
Disk 1
Disk 2
Disk 3
Disk 4                233GB Seagate ST3250620NS 3BKH at ata2-master SATA300
Disk 5
Disk 6                233GB Seagate ST3250620NS 3BKH at ata3-master SATA300
Disk 7
Disk Total            466GB
Root                  400MB 43%
Nextroot              400MB 42%
Var                   400MB 0%
Log                   54GB 16%
DB                    2GB 0%
Swap                  6GB
Mail Queue            10GB
RAM 1 A               512M ECC 667MHz
RAM 1 B               512M ECC 667MHz
RAM 2 A               512M ECC 667MHz
RAM 2 B               512M ECC 667MHz
RAM Total             2G
CPU 1                 D 2G 800FSB 0.5M Cache
PCI 1                 PCI-X 64-bit Empty
PCI 2                 PCI-e 8x Empty
NIC Data 1            00:xx:xx:xx:xx:6b, NetXtreme Gigabit Ethernet PCI Express (BCM5721)
NIC Data 2            00:xx:xx:xx:xx:6c, NetXtreme Gigabit Ethernet PCI Express (BCM5721)
PS1                   Unknown
PS2                   Unknown
Key                   1da, IronPort Anti-Spam
Key                   1da, Receiving
Key                   expire, Bounce Verification
Key                   expire, Central Mgmt
Key                   expire, Intelligent Multi-Scan
Key                   expire, IronPort Email Encryption
Key                   expire, IronPort Image Analysis
Key                   expire, McAfee
Key                   expire, Outbreak Filters
Key                   expire, RSA Email Data Loss Prevention
Key                   expire, Sophos
esalab.cisco.com>

How to setup DISK SPACE alert on OEM 10g Grid Control...

Similar Messages

Maybe you are looking for