How to setup E4200 as WAP only?

I am connecting the E4200 to a Sonicwall TZ100. I want the TZ100 to assign IP addresses to devices that connect to the LAN via the E4200.
How do I have the E4200 act as a WAP only or not assign IP addresses and push that responsibility to the TZ100?
I'd still want the E4200 to have a SID key for LAN access security.

Not quite getting what you want to achieve here, do you want to cascade the two routers? If yes, that's possible though that depends on what type of cascading you wanted. This link might help you, http://homekb.cisco.com/Cisco2/ukp.aspx?vw=1&docid=93f421de394444b6a93d9233fc4800eb_4622.xml&pid=80&...
(the concept is the same)

Similar Messages

  • How to Setup Flash Builder ActionScript only project for iPad?

    Hello!
    Can someone give a short guide on how to setup an ActionScript only prject in flash builder such that it can be compiled using adt and deployed to the iPad?
    i created successfully iphone games using FlashIDE and PFI.
    now I'd like to create an iPad app using Flash Builder (ActionScript only). but I fail to load the compiled IPA to the ipad, keep getting different errormessages thus i think something with my projectsetup is wrong

    Yes, in Terminal you type a single line which is made from the path to the adt application, some parameters, and paths to other documents. Here's the full list of things:
    /Location/to/AdobeAIRSDK_2.6/bin/adt
    -package
    -target ipa-test
    -provisioning-profile /Location/to/Provision.mobileprovision
    -storetype pkcs12
    -keystore /Location/to/Certificates.p12
    -storepass password
    NameOfApp.ipa ApplicationDescriptor-app.xml
    -C /Location/to/swf  NameOfApp.swf
    splashscreens
    icons
    That "-C" line is clever, it does a directory change to the folder you give it, so after the -C /location/to/swf part it will then look in that same folder for other documents, and for where to build the IPA file.

  • I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

    I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II.  How do I connect?  4000 only has 1 Display Port and 1 DVI.  5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all?  I read where on a PC they would work together, but on a MAC they do not.
    I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
    When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one.  I did not think there could be a difference.
    Mainly want to use it for CS6 and LR4.
    How to proceed??? 
    I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI.  Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
    Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
    As a last resort I could sell both and get a 5870.  That would work, I'm sure of that, it's just that I wanted the better graphics card.
    Thanks,
    Bill

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • How to setup the Linksys router E4200 DD-WRT for WVC54GCA

    I don't know how to setup the Linksys router E4200 DD-WRT for WVC54GCA. The DD-WRT is very complcated. Please help!!!!! Also, I have used the TZO.com for the DDNS. Should I setup the DDNS for DD-WRT router??? I used the DDNS for my old model router before. Thanks.
    Solved!
    Go to Solution.

    Hi majekho, that is best be answered by support from the developers at the DD-WRT forums.
    The Search Function is your friend.... and Google too.
    How to Secure your Network
    How to Upgrade Routers Firmware
    Setting-Up a Router with DSL Internet Service
    Setting-Up a Router with Cable Internet Service
    How to Hard Reset or 30/30/30 your Router

  • How to setup my iPad to sync automatically not only the movies and songs I have bought but also the tv shows?

    How to setup my iPad to sync automatically not only the movies and songs I have bought but also the tv shows?

    Chris Bui wrote:
    Thank you Diavonex......... This is not a joke and please do respect when people really need help.
    Diavonex was not treating this as a joke. He was giving you the answer to your question in a perfectly polite and respectful way. Without the Apple ID credentials to which the iPad is locked or proof that you are the original purchaser, there's nothing you can do. The device is useless to you.

  • How to setup a Seamless Transaction Gateway with PayPal (Australia Only)

    I've been working with the team at PayPal to allow BC Partners to set up a cost effective way to setup a Seamless Transaction Shopping Cart Process on their BC eCommerce website without the need for a 3rd Party Merchant Provider like eWay or Secure Pay or their bank. This is designed for entry level businesses who want to control their setup costs and keep all funds in one place (PayPal).
    Currently BC doesn't support Paypal's Payments Pro plan in Australia so you are limited with either a non-seamless payment process or using a 3rd Party Merchant provider with can be costly.
    Without going into too much detail, the setup on PayPal's side is a mixture of a couple of plans, and is a little complicated however through our discussions we come to an arrangement of any additional fee's associated with the setup being waived since this is more so of a technical workaround than anything else.
    Basically PayPal is the merchant provider, and the customer doesn't leave your website when making a purchase through the Shopping Cart. The setup is only $25/month plus transaction fees of between 1.1 to 2.4% + 30 cents depending on the number of payments (this is just an initial guide and confirmed on your discussion with the PayPal).
    Because the setup involves quite a few steps and departments I've arranged a contact that will fast track this process and is familiar with this unique setup.
    How to setup PayPal for a Seamless Transaction Process
    Sign up for PayPal Business account  Timeframe: <20 minutes
    Email Peter [email protected] or phone (02) 8288 0333. CC me [email protected] or mention my name so he can correctly setup the process and apply the discounted pricing.
    Prepare for the Verification process for the PayPal account (Proof of ID, Proof of Address, Business documents etc).
    Wait for Account Verification. You will be informed to setup both PayFlow Pro* and Website Payments Pro (*the PayFlow payment will be waived as mentioned previously). Timeframe: up to 5 business days depending on swift supply of required documentation.
    Wait for your Billing Agreement for Website Payments Pro once application has been approved. Sometimes they will receive a phone call to verify details of the application. Timeframe: Up to 72 hours
    Login into your PayPal account to accept the Billing Agreement.
    Notify Peter once the Billing Agreement has been accepted so your PayFlow Pro can be linked to your Website Payments Pro
    Login into your Business Catalyst Website and navigate e-Commerce > Payment Gateways
    Select PayPal PayFlow Payment Gateway (..,AU, ..)
    Enter your Username, PayPal Password, and add VSA as the Partner
    Setting up PayPal Payments
    If you also want to make payments via PayPal (ie, with the customers Pay Pal account) you can continue with setting up the PayPal Website Standard secure with your PayPal Customer ID and your PDT Token which you'll need to setup in your PayPal Account.
    If you have any questions give me or Peter an email. I'll continue to update this document as I go.
    Please note this setup is current for Australian Pay Pal Customers only. This process does not support re-occurring billing.

    Dennis, sounds like you are having issues connecting to your network. Here is what we are going to do. 
    On your first question,  and second question for that matter, I would suggest using a WPA password. Our printers doe not associate with the other types as well as WPA. You should be able to do that, though I have not personally set up a router that way to have experience in how it will react with the networked devices. As for the issues you are having, once the settings are all in the correct order I am going to suggest we connect the printer to the network through the computer. 
    What you will do is install the printer using a USB connection, then re-run the setup software. Here there should be an option for USB to  Wireless. This will be the easiest way to be sure that all the settings are correctly transferred over. 
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?cc=us&lc=en&dlc=en&product=303770
    You can find the software in the link above. 
    Let me know if this helps! 

  • How to setup remote access with E4200?

    Hi,
    I am new to this and I need help from you all on how to setup the E4200 so that I can access the media server when I am in office?  Is there a guide or step by step procedure on this?  I was browsing on the Cisco website and unable to find it. 

    The purpose of using DDNS is it substitutes the public/WAN ip address provided by your ISP.We all know that the ip address provided by our ISP(if we are not subscribe to a premium static ip address) is basically public and will always change from time to time.So it will be difficult for us to know what's the ip address our ISP has provided us and this will lead us problems accessing our router or ftp server remotely. Thus by using DDNS' it will now allow us to access the router remotely without knowing what's the WAN ip address.

  • How to delete email from iPhone ONLY and not from server?

    Hi. I have a Yahoo! POP mail account.. Can anyone advise me how to setup my iPhone so it ONLY deletes email from the iPhone and NOT the server. So, after I read an email on the iPhone and delete it, the email remains in the INBOX on the server? If not, I will send a feedback to Apple. BTW - I can dl and send email just fine. Thank you.

    ampullae,
    When you setup Yahoo on the iPhone it defaults to IMAP because Yahoo offers free IMAP Push for iPhone users, as discussed in this article:
    http://docs.info.apple.com/article.html?artnum=305882
    If you add your Yahoo account as "other" it will be setup as POP.
    With IMAP messages are stored on the server, and messages created in one email client, such as the iPhone, show up in the sent mailbox on both. In addition messages moved to a different folder on the iPhone, will be in a different folder when you access your Yahoo mail via a web browser or another IMAP client. Likewise message you delete, will also be synchronized and deleted.
    Hope this helps,
    Nathan C.

  • How to setup a static IP for a wireless printer

    This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it.  For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better.  At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected".  The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
    The only way to fix this is reboot, and then the printer shows up again in Preferences.  I select it and all is well again...until a few days pass and the same thing happens again.  Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use.  I also have an Epson Artisan 725 and the same thing happens with it about once a week.  Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
    I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer.  Any help would be greatly appreciated.

    You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
    If you have AirPOrt Extreme, you could do this:
    In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
    Start up the AiPort Admin Utility
    Go to Network tab
    click + in the DHCP reservations
    Choose an IP you want for your ATV & Enter the MAC address
    From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
    It is not a static IP in a true sense, but behaves just like one.
    Works great for me...
    If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

  • How to setup Charms in a 2 tier landscape ?

    Hi All,
    We have a two tier landscape i.e only having development and production system so how to setup STMS and all other settings in this type of scenario.
    Can we use Virtual system in STMS as a Quality system ? If yes then please guide us and tell me how to proceed as if we dont know how to add virtual system in SMSY in solman. Please provide us with a clear picture and give us detail documentation if possible.

    Hi All,
    Please tell me as per the SAP standard recommendation is it necessary to have a cycle like DEV->QUAL-PROD for Charms as we are not having any Quality system or Client here in our landscape.
    Please suggest a way how to proceed in this case. Please help me out.

  • How to setup breakpoints in a vector space?

    Hi,
    How to setup breakpoints in a 2D vector space in NI 7344 and check for them using flex_read_breakpoint_status_rtn?
    Thanks.

    Hi,
    Is Office Communicator something to do with the Word, Exel and Powerpoint Office Package ?
    What sort of Screen Names or IDs do you use with that ?
    If these are MSN/Live accounts names then it can be made to work for Text Chats but not Video or Audio Only chats
    10:38 PM      Friday; April 20, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How to setup iChat in a office

    How to setup iChat in a office that using Office Communicator as a IM ?

    Hi,
    Is Office Communicator something to do with the Word, Exel and Powerpoint Office Package ?
    What sort of Screen Names or IDs do you use with that ?
    If these are MSN/Live accounts names then it can be made to work for Text Chats but not Video or Audio Only chats
    10:38 PM      Friday; April 20, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How to Setup Historical DSC Database on a standalone Server

    Hey @all,
    I am looking for documentation how to setup a standalone server for the DSC Module(Ver. 8) Historical Database.
    My aim is to log all data to this server. The Server will be running Win2K.
    Do I have to install the complete Labview 8 software and the DSC Module?
    Does a walkthrough exist how to setup a DSC server?
    Thx!
    Carsten  

    After installing the runtime you should only have to reboot the computer in order to get the citadel service running.  At the point, for citadel purposes, this machine will behave as though you had the DSC development system installed.  The 8.0 runtime has no setup requirements...it should only need to be installed.  Unlike previous versions, 8.0 requires you to build your application into an executable and the runtime should be invisible to you once you install it.  If this is not the case, please post about it so it can be looked at.
    If you have specific questions, please post them and I will either try and help you find the answers, get them posted, or answer them myself.
    Regards,
    Robert

  • How to setup word docs, converted to PDF on local drive with links to a second file at a page

    how to setup word docs, converted to PDF on local drive with links to a second file at a page
    Need to setup a set of word documents, converted to PDF that has links from one file to a second file at a given page.
    I would like to setup a set of pdf documents, on the hard disk of a PC or Mac, that can be open with acrobat pro running on the same computer and have the link jump to, and open in a new window, in acrobat pro, to a given page of a second document in the set.
    Is there a way to setup a link in word and the conversion to pdf that will result in a link that is equivalent to the acrobat link type  you get when you add a link of the type Go to a page in another document?
    Tools-Advanced Editing-Link tool, make a box
    Check: Go to page view, Next (Create go to view dialog opens)
    Open second document and go to page
    Click “Create go to view dialog” to set up link
    Result is a link, when view by link properties, with an action of
    Go to a page in another document
    File: C:\My Documents\second file.pdf
    Page: 43
    Zoom level: Custom
    I got close but did not solve the problem:
    I have a version that uses links to a website, using #page=43 at the end of the hyperlink.
    That works but will only open to the page if is through the web browser, opening the acrobat reader plugin.
    I need to open from a folder on the local harddisk (with relative links), in acrobat pro to the given page of the pdf, on a PC or a Mac.
    I could bookmark each page “pagenumberxxx” and jump to the bookmark/page if that would get around some problem
    Current Systems in use to create documents with links and view them:
    Windows XP SP3
    Word 2003 SP3
    Acrobat 9 pro version 9.4.4
    Or just to view them:
    Mac OS 10 Lion version 10.7.4
    Acrobat 9 pro version 9.5.1
    (note I have limited understanding of Mac’s)
    John

    No.  There seems to be no automated way to do it.  You can of course go into the PDF and manually add links after you have converted to PDF, but that is what we want to avoid having to do.  We want it to be automatic from the Word doc.

  • How to setup my airport for music streaming

    Hi all
    I would like to use my iPhone and or iPad to stream music from Pandora and Spotify to my 5.1 (Wired) Speakers.
    This question is similiar to this thread https://discussions.apple.com/thread/4153687 however i wanted some clarity and thought best to start a new discussion before pulling my hair out doing this the wrong way.
    I have an unused Airport Express basestation (A1408) My current home setup is as follows:
    Modem Router: (Netgear DGND3700) N600 Wireless ADSL2+ Dual band Gigabit
    Home Theatre Computer: Windows 7 (Cat6 LAN Ethernet connection) NO LAN port
    AV Reciever: (Onkyo TX-SR309)
    5.1 Speakers: Wired connection to AV Receiver (NOT Airplay capable)
    Laptop: Windows 7 (Cat6 LAN Ethernet connection)
    My question is how to setup the airport, i understand it can be used to enable airplay streaming of music over the existing WiFi network, as these music streaming apps download and play music concurrently i would not want to have to switch between to two seperate WiFi networks. Should i plug the airport into the HTPC? I would need to purchase a LAN Splitter as the only LAN socket is already taken up with my cat6 connection. OR would i plug it directly into the modem/router? This second option is prefereable.
    I have attached an image of my setup below. Any advice would be great, Regards Steve
    [URL=http://s1293.photobucket.com/user/steve7677/media/homesetup_zps63eaf61c.jpg.html][IMG]http://i1293.photobucket.com/albums/b599/steve7677/homesetup_zps63eaf61c.jpg[/IMG][/URL]

    Still slightly confused, with the link you provided i chose scenario 2. All the other secanrios instructed i connect the airport express to my home stereo or powered speakers. As i dont have an aiport express only an airport extreme there is no audio jack and cannot connect it to the stereo/speakers.
    option 2: Connecting to an existing Wi-Fi network as part of a roaming network
    Ensure that the AirPort base station Ethernet cables are connected as above
    I have done this and conected it via ethernet cat6 to the modem/router
    Launch AirPort Utility 6.1. The Assistant will automatically configure the Roaming network
    Im using windows 7 and cannot find this version of aiport utility, only 5.6.1 - The message comes up: Aiport utility was unable to find any airport wireless device. I am running this utility on my win7 HTPC (which is connected to my modem/router via cat6 LAN) The airport light is blinkng amber.
    would you reccommend a hard reset of the airport? or can you provide a link for AirPort Utility 6.1.?
    Regards

Maybe you are looking for