How to setup Exchange 2007 production server replica in a lab environment.

Hi,
We have an single exchange standalone server in production environment. I want to setup the replica for that with users and exchange databases. Please suggest the best way to perform this task.
Sudheer MCP,MCSA(Server 2012)

Hi Sudheer,
Thank you for your question.
For user database replication, we could install BDC to meet your requirement, we could refer to the following link:
https://technet.microsoft.com/en-us/library/cc738032(v=ws.10).aspx
For Exchange database replication, this is a single Exchange server, it is referred to local continuous replication(LCR), if I misunderstand, please be free to let me know. We could refer to the following link:
https://technet.microsoft.com/en-us/library/bb125195(v=exchg.80).aspx
However, we didn’t deploy LCR in production, we could install another server to perform another high availability(ccr,scc,scr), we could refer to the following link:
https://technet.microsoft.com/en-us/library/bb124721(v=exchg.80).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

Similar Messages

Exchange 2007 edge server with ironport

I currently have a frontend exch 2003 and backend exch 2003 server with ironport. my mx record is the ironport which then forwards into the backend server. The frontend server was only used for owa and using outlook with https connection to exchange.
With 2007 it has more functionality and the front end server is now called an edge server. Should I have mx go there then to ironport or vice versa? I'm thinking ironport to edge server to hub transport server. Is that correct? will it work?
anyone have exchange 2007 edge server with ironport? what are you doing?

well that wouldve been nice to know a little earlier. anyway I have ironport successfully sending mail to the edge server who sends it on to the hub transport server. right now the client access server is on the same as the hub but can be easily moved later. this is for very few people so its not like I need to off load anything as its a powerful dual core server. anyway now with the edge server I can test how effective it is versus the ironport. I'll let everyone know when you can ditch the ironport for msft's edge server. (Don't hold your breath).

How to setup a Firefox update server on a Windows 2012 server?

Are there any instructions available on how to setup a Firefox update server that can automatically download updates from the Mozilla site and users can then grab the updates from the internal server? I'm using wampserver so that I can utilize Apache and PHP on the 2012 server.
Thanks!

See this MDN page: https://developer.mozilla.org/en-US/docs/Mozilla/Setting_up_an_update_server
Note: Last updated by: Kohei, Sep 15, 2009 4:08:00 PM

How to view Exchange 2007 Public folders, calender on iphone

How to view Exchange 2007 public folders mainly the calenders on the iphone?

Not possible.
Sent from my iPad.

How to decomission a Exchange 2007 Mailbox server

Hello,
We are running Exchange 2007 SP3 servers. We currently have a Mailbox server we want to decommission. I'd like help on how to achieve this. I want to make sure that all mailboxes have been moved from that server and remove the Public Folder database as well.
I understand that the Public Folders needs to stop replicating to this server, can someone please guide me on how to do that?
All kinds of help are appreciated. Thanks!

For the public folder stuff, see these scripts: https://technet.microsoft.com/en-us/library/aa997966(v=exchg.141).aspx
The system folders can be replicated with the '\non_ipm_subtree' identifier, but some system folders are per-server and don't need to replicate. OAB distribution however
is one that might matter.
Mike Crowley | Microsoft MVP
Baseline
Technologies

Decommission Exchange 2007 Mailbox Server from Cluster

Hi! I realize this is an Exchange 2013 forum, however as I do not see any forums for older flavors of Exchange I'm going to post this here. If a better forum exists please let me know and I'll happily move to that forum for my answers.
I am just finishing a migration from Exchange 2007 to Exchange 2013. In the Exchange 2007 environment I have 2 CCR Mailbox Clusters. While working to decommission the first of the two clusters I successfully evicted the passive node, however
I mistakenly evicted the active node rather than removing it by running the Exchange Setup Wizard as outlined in the TechNet article "How to Remove the Active Mailbox Role from a CCR Environment".
Now, when attempting to uninstall Exchange 2007 using the Setup Wizard in Add/Remove Program I get the following error during the prerequisite check for the 'Mailbox Role':
Error:
Exchange server FQDN was not found. Please make sure you have typed it correctly."
Setup then completes.
Is there a way to cleanly uninstall Exchange 2007 and clean-up Active Directory?
Thanks!

Hi Jesse,
Thank you for your question.
We could run “ADsiedit.msc” in run, then navigate
Configuration [<domainController>.contoso.com]> CN=Configuration,DC=contoso,DC=com> CN=Services> CN=Microsoft Exchange> CN=<OrganizationName> CN=Administrative Group> CN=Exchange Administrative Group>CN=Server
We could check if mailbox server is existed in this container, we could remove it.
Notice: Before we remove it, we could make a backup for AD database. We suggest you call MS engineer for help.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

How to Setup JMS in Siebel Server

Hi
Currently we have a Requirement to work with queuing System from JMS Queuing
How to Setup the JMS Queuing from Siebel Point of view?
Does JMS Should be Installed in Siebel Server?
Plz Provide Inputs for How to Set up the JMS Queuing Mechanism and Setting up the Queues for Posting and Receiving the Messages from JMS Queues
Thanks & Regards
Rajendra Prasad

Update - it works ! At least I can connect to Mountain Lion (not server) from my iPhone using the VPN Server Configurator app.
Here's what I did :
1) download the app and install
2) setup using the help files on the web page : http://www.greenworldsoft.com/product-vpn-server-help.html
3) at the last stage you need to setup port forwardin on your router
4) under Airport Utility 6.0 you cannot setup ports 500 or 4500 due to BTTM conflicts but setup the other 2 ports (1723 TCP and 1701 UDP), update airport extreme
5) download Airport Utility 5.6 from here : download already extracted utility it is in it's extracted form as is necessary under Mtn Lion (thanks to NetUse Monitor for the download - great app by the way)
6) run 5.6 and setup port forwarding (Advanced-Port Mapping) for the other 2 ports (500 and 4500 UDP), update airport extreme
7) that's it, I was able to connect to the VPN from my iPhone !

How to upgrade Exchange 2007 from Sp1 to SP3 RU13

Hi everyone, I have a mail system Exchange 2007 SP1 CAS and HUB with 3 servers.
The mailboxes are on a Windows Server 2008 Failover Cluster.
Domain controllers are Windows Server 2003 SP2
I have to update the mail system with Service Pack 3 and RU13.
Does anyone can tell me the procedure? where I have to start by the CAS / HUB or cluster mailboxes?
How do I update the cluster of mailboxes, the resources on the active node and update it, or liability?
There's something I have to take intoaccount before upgrading?
I can upgrade directly to SP3? or I have to upgrade before SP2? thank you very much
Microsoft Certified IT Professional Server Administrator

http://technet.microsoft.com/en-us/library/bb885043(v=exchg.80).aspx
Applying Exchange 2007 Update Rollups to Clustered Mailbox Servers
and
http://technet.microsoft.com/en-us/library/ee221147(v=exchg.80).aspx
How to Install the Latest Service Pack or Update Rollup for Exchange 2007
and, yes, you can go straight to SP3
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

How to introduce exchange 2013 mailbox server in an existing Exchange 2010 Environment

Hi All,
we are planning to install exchange 2013 mailbox server in an Exchange 2010 environment. we have 3 MB servers, 1 CAS 1 HUB which is installed with Exchange 2010 SP3 Enterprise Edition. how to install new exchange server 2013 and i have to add the 2013
servers in to existing DAG and migrate all mailboxes in to 2013 server. Please advise me from the scratch. also will it be create any impact in my existing setup.
Thanks, Venkatesh. "Hardwork Never Fails"

For a step by step follow the deployment assistant
http://technet.microsoft.com/en-US/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

How to get Exchange 2010 Product Keys from an existing installed servers

hi All,
we are facing some kind of critical issues. we had 3 MB servers . the two servers are in DAG all our productions DB's running in DAG. the DAG servers are crashed due to hardware issues. one server is acting as archival server. all servers are running exchange
2010 sp3.
now we are trying to rebuild new servers to restore DB's. the new servers is prompting the product key to be entered. unfortunately we don't have product keys of exchange 2010. since we are gold partner we have partner network portal. when i tried to get
the product key from portal am able to see only 2013 keys. we called up Microsoft and explained but no use. they said we have to use exchange 2013. but we cant simply go ahead and migrate.
but the only option is we have exchange 2010 installed servers they all act as CAS/HUB server with the same licence. please let me know how do i retrieve exchange 2010 product keys from an existing servers. Please advise me its very critical.
can we get the product keys through some kind of scripts?
Thanks, Venkatesh. "Hardwork Never Fails"

Hi,
For this issue, I recommend you contact Microsoft customer service to consult this question. Thanks for your understanding.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Can't connect to Exchange 2007 SP2 server

When I try and set up a new Exchange account to our internal Exchange 2007 server I get the following error message:
"The Exchange Server '<server name>' doesn't have the minimum required version installed. To use Mail with Exchange, the server must be running Update Rollup 4 for Exchange Server 2007 Service Pack 1 or later. Contact your server administrator.'
in spite of Service Pack 2 being installed on the server.
Exchange Web Services are running as expected at the URL '/EWS/Exchange.asmx'.
If anyone has suggestion on how to diagnose the exact problem I would very much appreciate the assistance.
N.

Hello,
I don't have any ideas yet but can chime in with "me too".
A customer has an Exchange 2003 SP2 server (MS Server 2003 for SBS). It has a self-signed SSL certificate that does not expire until June 2011.
One user has some species of Blackberry that can pick up his email (but not contacts or calendar) via OWA. I can see his accesses in the IIS log and they are coming from IP addresses resolving to (stuff).bise.na.blackberry.com and are not getting 404's.
Another user is trying to set up his new Blackberry via BIS. His accesses in the IIS log are coming from different IP addresses that resolve to (stuff).bis.ap.blackberry.com and these are getting 404's.
An ExpertsExchange.com article - http://www.experts-exchange.com/Software/Server_Software/Web_Servers/Microsoft_IIS/Q_22806090.html - suggested putting the full email address into the OWA URL. This works fine in a browser but not in BIS. I still get the same error message from BIS and 404's in the IIS log.

Exchange 2007 on Server 2003 - Powershell

Hi all,
i need to upgrade Powershell on one my servers from version 1 to version2. The box is running Server 2003 R2 with Exchange 2007 SP3 on it.
If i install pwoershell 2 how does it effect the exchange shell. is the exchange shell updated as well?
Thanks

Hi PATEL,
Yes, when you upgrade PowerShell on your server, the exchange shell is updated as well.
You can refer to the following article to understand more details about Exchange shell:
Overview of Exchange Management Shell
In Microsoft Exchange Server 2007, the Shell consists of a Windows PowerShell host; a Windows PowerShell snap-in, which contains all of the Exchange cmdlets; and some additional custom scripts. Loading all three components enables you to run Exchange cmdlets
on the Exchange server you opened the Shell on.
When you open Windows PowerShell on a computer, you create a local session. In simple terms, a session is an environment in which Windows PowerShell runs. Cmdlets, variables, and other Windows PowerShell components within the same session can share data
with each other. In Exchange 2007, cmdlets are always run in the local session on the local Exchange 2007 server. Even if you change an object that resides on a different server, the cmdlet is always run on the local Exchange server.
Best regards,
Niko Cheng
TechNet Community Support

How to setup exchange 2003 on mac mail 10.6

How can i setup mac mail 10.6 with exchange 2003 ?

It won't work, Mail works with Exchange 2007 and later.

How to setup the MDT Upstream server and down stream server

Hi,
i have configured the MDT upstream server at office1 & i need to setup the downstream server at office2.
Image should be replicate from upstream server to downstream server and image should be build from
downstream server at office2 not upstream server. I need to use LAN network, not MAN network.
How i can setup the downstream MDT server?
Can you please suggest on this.
Thanks!

Hi Meganathen,
I would go for a periodically (scheduled) robocopy. Yes it's perfectly possible to create this with selection profiles and linked deploymentshares, but based on my own experiences and consulting other subject matter experts like MVP Johan Arwidmark, it is
advised to take care of replication yourself by robocopy or by DFSR
This way you are in control, and robocopy is a great tool to take care of replication of files.
To keep in mind your central deploymentshare and branche deploymentshare, you can play with the bootstrap.ini and customsettings.ini, that they will refer to a different deploymentshare location based on default gateway.
See these links for more information:
http://social.technet.microsoft.com/Forums/en-US/1c4bf193-6293-4207-9995-005dd1756fdd/mdt-2010-for-multiple-sites?forum=mdt
http://tech.sportstoday.us/windows_7/fine-tuning-mdt-deployments---creating-a-linked-deployment-share-(part-2)---maintaining-linked-deployment-shares.aspx
Good luck!
If this post is helpful please click "Mark for answer", thanks! Kind regards

How to change logo in production server- very urgent

Hi,
I have to change the logo in production server, they have provided a new logo, how should I load it into production server as well as how can call it into my Script.
I can upload logo in my development server, and can change it in my script, if I move it to production, my newly uploaded logo will also move to production server, or should I move it some other way, please help

hi,
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
Here you go !!
*& Form TOP_OF_PAGE
* text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo = Logo name
* I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
Rgds'
Anver

How to setup Exchange 2007 production server replica in a lab environment.

Similar Messages

Maybe you are looking for