How to setup FCE for a sony AVCHD camcorder

Hello,
I'm new to apple and to video editing. I've connected my Sony HDR-XR350 with the imac through USB. FCE 4.0 The camcorder isn't recognized "no name", but i can browse its files (MTS format)
- what option to select in "easy setup"? Apple intermediate codec 1080i50 or 60?
- I've tried both options, but when trying to import files through the log and transfer window i get an error message of "unsupported media"
what am i doing wrong?
thanks for your help!!!
greetings
bart

1080i50. Make sure you make a new sequence after you change the preset.
Read the manual section on log and transfer to explain how to work with this media.

Similar Messages

  • How to setup variants for webdynpro report in ABAP? Help!

    Hi Experts,
       I have a webdynpro for ABAP report with selection screen. 
       How to setup variants for webdynpro report in ABAP?
    Thanks
    Gopal

    Hi Gopal,
      There is no concept of Variant in Webdynpro ABAP. But in our project we have some tool to do that. Its not release to the client I think. In my scenarieo, We create the Screen variant and program name will be supplied to the tool that will generate the ouput in PDF and Selection screen in One view. But the same is not avilable .
    If you want the same concept in Webdynpro ABAP, you need to go for Dynamic programming only. This is the only option is avilable.
    Warm Regards,
    Vijay

  • Sony avchd camcorder

    How can i import my avchd file from my sony avchd camcorder hdrsr7. Final cut express 4 does not recognize those files.

    That's correct. You use USB to connect the camera. If the camera is connected and you open log and transfer it is not detected, use the Add Folder button in the upper left corner and point it at the card which should be on your desktop. If the card is not appearing mounted on the desktop, try rebooting.

  • TS3720 how can i upload movies from Sony pj580v camcorder to use with imovie11?

    How can I upload movies from Sony pj580v camcorder to use with imovie 11?

    Transfer it to your computer and import into iTunes, make sure it's in a compatible format. Then simply sync with the iPad. If you have a camera connection kit and you know the footage is compatible you can connect it directly.
    Follow the link to see formats
    http://www.apple.com/ipad/specs/

  • How to setup QoS for IP/Mac Address WRVS4400N

    I need some help setting up QoS for two Cisco/Linksys devivces on my network. 
    Network devices are Comcast SB6120 modem into WRVS4400n (v2.0.2.1 firmware) that divides into one 24 port gigabit Netgear unmanaged switch, 1 port into AT&T Cisco Microcell, 1 port to HP Officejet 7700 wired printer.  Unmanaged switch has approx 10 devices attached (including another 8 port unmanaged gigabit switch).  3 static leases are defined for the network for three devices (HP OJ 7700 printer, Cisco/Linksys PAP2 VOIP adapter, windows home server v1.  DHCP is handled by WRVS4400n.  Comcast service provides 12mbps of service upstream, 4mbps downstream.
    Need to setup QoS for AT&T Microcell and PAP2 VOIP adapter.  The real issue that I can't figure out how to configure is IP based priority access.  I can do rate control for an IP address but can't figure out how to specify priority control for an IP.
    Here are my the current config questions:
    1.  Bandwidth management page:  For the microcell device plugged into port 1, do i set the default CoS to 4 or 1?
    2.  Bandwidth management page:  Should the bandwidth management type be set to priority?  I assume yes since I need to define the UDP/TCP ports for priority.  The major issues here are
    a) one of the ports the Microcell uses is secure https (TCP 443) which is could also be used by any other internet device. 
    b) can't specify priority for the PAP2, since it's behind the unmanaged 24 port switch
    3.  QoS setup page:  Do I need just 2 queues (one for the port ID for the Microcell and one for the IP address of the Linksys adapter)?
    4.  QoS setup page:  I assume I need to define DSCP for the unmanaged switch but not sure how to tie a queue to an IP address
    4.  QoS setup page:  Shoud priority 0 be set for the most important queue (microcell) and the priority 1 CoS be for the VOIP adapter?  Again, not sure about how to define priority by IP address.
    5.  DSCP setup page:  As far as I can find, there's no documentation on how to setup this page.   

    That's what I do. I keep it simple, one calendar, one set of contacts.
    iCloud is really the simplest way to go, as it will sync your (eventual) single Contacts and Calendar across all your devices.
    I would:
    Figure out which single calendar (in Calendar.app) and contacts (in Contacts.app) that you want to keep.
    I'd make a backup of each one. For example,
    in Contacts, File > Export... > Contacts Archive...
    in Calendar, File > Export... > Calendar Archive...
    Make a backup of the other calendar events and contacts that you want to save.
    delete all the contacts and calendars from your phones and your iPad.
    add the contacts and events from the backups to the single calendar in Calendar.app and your contacts in Contacts.app on your iMac. There is probably some way to export the contacts and events you are adding, and then combine them, but you could also just add them manually.
    Then when you configure all your devices for iCloud, they will be all synced automatically.
    Message was edited by: arthur

  • NewbieQuestion: How to setup OCCI for Visual C++ 6

    I'm new to OCCI and Visual C++, Please help to illustrate how to setup OCCI environment for Visual C++ 6
    Thanks in advance

    Check make.bat under %ORACLE_HOME%\rdbms\demo on how to compile OCCI programs in Windows. OCCI samples can be found in %ORACLE_HOME\rdbms\demo and in :-
    http://www.oracle.com/technology/sample_code/tech/occi/index.html
    Regards,
    Shankar

  • Optimal Settings for Converting Sony AVCHD .MTS Footage for DVD Delivery

    I am starting with footage from a Sony HDR-SR7 camcorder. Since iMovie is still kind of wonky with this, I am going to batch convert all my clips using the VeggieTools plug-in scripting for *Sony Vegas Pro* (under my Windows partition of my MacBook Pro). I can convert over each file into a new clip in a lot of different formats.
    My goal is to *bring the footage over to Mac and edit it in Final Cut Express.* Eventually, I will be mastering and delivering on DVD (most likely through iDVD). And I am looking for guidance.
    First, I have a lot of choices for the conversion format. But I am not sure what to use. I know that the original is upper field dominant and HD in size (16:9). I will eventually be going to standard DVD NTSC (with letterboxing top and bottom to fill up the format space of the 4:3 aspect ratio). And I assume that is lower field dominant.
    Do I need to find some setting that lets me convert the footage to double the 29.97 fps rate while interpolating the fields? Or do I not have to worry about this? I am worried that bringing the size of the footage down will create some weird artifacts if this isn't taken care of first.
    I guess the main question is, since I am looking to pretty much just edit these clips together and won't be doing much in the way of special effects, what's the best way or format to choose to *turn the HD footage into high quality SD footage* that I can quickly trim and string together *in Final Cut Express*...
    Not sure if I gave enough info. I will be checking often in anyone wishes to try and tackle this one and needs more details...
    And thanks for listening!!

    OK my fault for not being clear on an extremely important point: I don't need anamorphic widescreen. Sorry to waste your brainpower on my lack of clarity. Mea culpa.
    I intend to show this only on a standard definition TV from a standard definition DVD player. The "letterboxing" I spoke of is intentional on my part inside the standard def 4:3 frame. I will just let there be black bars at the top and the bottom.
    So I don't need full super high resolution during this transfer (IF iMovie hadn't stopped recognizing my Sony AVCHD MTS camera after the first batch of video I collected, this wouldn't even be an issue. Been spending days on the forums trying all the solutions for the rest of my footage...).
    But now that I have a workaround, I am just mostly confused about what to do about the field order (and thus, the frame rate) and the resizing (for convenience in size and playback speed). The original is upper first, and I am pretty sure that the QuickTime Movie I eventually make for iDVD should be lower field first (haven't tried tackling the can of worms of ideal MOV settings for an iDVD standard def disc yet).

  • Two printers with different paper sizes. How to setup defaults for each?

    I have two printers connected to my beloved Mini: Samsung ML-1610 & Epson AccuLaser C1100.
    First printer uses American Quarto US Letter paper.
    Second one - European A4.
    Every time I try to print anything on either of them I receive a message from printer driver that paper size mismatched. Further more either printer will wait until I press buttons on them to "proceed". Which is very annoying to say the least.
    How can I setup defaults for every printer in Mac OS Leopard? If I use printer preferences dialog it will setup either size for both printers rather than for each its own.
    Please advise.

    PAHU wrote:
    You cannot do exactly what you want from a user interface perspective. I am not sure if such a thing is possible by making changes to hidden files. I certainly haven't heard of it but it may still be possible.
    From what I have seen, the page setup dialog is independent of the print dialog. If you set the 'Format for' to one printer, a then choose a different printer when you print, the previous settings won't apply.
    You could see if the printer set to A4 supports automatic conversion of LTR to A4. Then at least it won't ask for attention when you send a LTR page to it. Otherwise I think your only option is to check before you print that you have selected the correct paper size for the printer.
    PaHu
    That's freaking ridiculous!!!
    You've got to be kidding me... right?
    Even MacOS 8 could do this.
    Like it's horrible for me because I print a lot of photos. So I set my default paper type Format for: Canon MP610 series, Paper Size: US Letter (borderless). But then when I go home and print web pages or text documents on my Apple LaserWriter 16/600 PS, then it still remains set to Format for: Canon MP610 series. The freaking OS knows what printer I'm using; why would it remain formatted for the other printer even though that will cut off the edges of all my prints (since the LaserWriter does not do borderless printing) -- and not even warn me?! I just wasted 30 pages!
    I cannot tell you how preposterous it is that a modern OS like Mac OS X cannot even get a simple thing such as printing correct. How could they screw up PRINTING?!
    -Jon

  • How to setup CTS+ for BODS 4.1 systems

    Hi all,
    I am trying to setup CTS+ for BODS systems to transport the objects from dev--> QA---> Prod.
    I Couldnt find any document which explains about CTS+ for BODS systems.
    I have some knowledge on how CTS+ works and worked on CTS + for EP and PI.
    Can someone let me know the steps involved in setting up CTS + for BODS 4.1 systems.
    Thanks
    Vimal.SMR
    Message was edited by: Andy Silvey

    Hi Vimal,
    see if this OSS Note helps:
    1762987 - How to configure LCM with CTS+
    Kind regards,
    Andy.

  • How to setup SSL for Business Objects

    Dear colleagues,
    can you help with the following issue: we want to setup SSL for BO and have dedicted information for the implementation of certificates and know that sapcryptolib needs to be used. But there is no information provided how to inform BO about the location of the sapcryptolib. Can anybody provide a hint for this? Many thanks in advance.
    Best regards,
          Detlef Kreiss (HP Outsourcing services)

    Detlef,
    The SAP Crypto library is not required if you are simply trying to secure the webserver using SSL.
    Securing IIS (.NET infoview, or IIS fronting a Java application server) is pretty simple as you would follow the same steps to SSL secure it as you would any IIS server (there is an add certificate button in the properties of IIS).
    If you are using a Java Application server solely and want to SSL secure that, there is an SAP note to describe the steps required to add an SSL certificate to the (Tomcat) Java keystore.
    Please see:
    1299147 - How to setup SSL on Tomcat in Business Objects Enterprise XI 3.1?
    https://bosap-support.wdf.sap.corp/sap/support/notes/print/1299147
    -Brian

  • How to setup dreamweaver for synchronizing  website?

    Hi, I'm trying to setup dreamweaver 8 in a way that mimics my
    online website. The problem I am having is that on my real sites'
    server I have placed most of the files outsite the public root
    (security reasons), and I'm not sure how to setup dreamweaver so I
    can synchronize with this. I am running a WAMP configuration for my
    test / development machine.
    Online website structure:
    some_folder
    -source code
    - includes files etc..
    public_html (document root)
    - html files
    -images
    -css
    An example of how my apache virtual host is setup
    Document Root: C:\mysite\public_html //This works fine...
    If I setup a site in dreamweaver that uses C:\mysite as the
    root, the setup resembles the online one. But there is a problem
    with this because it uses C:\mysite as the "document root" whereas
    the folder C:\mysite\public_html should be the document root. Now
    if I change my document root to C:\mysite\public_html then I don't
    have access to any of the files above this directory... I'm kind of
    screwed with each option I take...

    Here are the email server settings that work for me on iMac or iPad using Mac Mail program.
    Verizon changed to different email server.
    Make sure password for account is correct by resetting password:
    Reset password by clicking "I cannot access my account link" on page or login below
    https://login.yahoo.com/config/login?.intl=us&.partner=vz-acs&&.lang=en-US&.intl =US&.done=http://hom...
    Enter username here to reset password :https://signin.verizon.com/sso/forgotflows
    Passwords must match for verizon yahoo & verizon account.
    email server settings:
    Example
    Name: john smith
    email address:[email protected]
    user name: john smith (Do not use full email address here)
    Incoming Mail Server: incoming.yahoo.verizon.net
    SSL: on (Port 995)
    Authentication: Password
    Outgoing Mail Server: outgoing.yahoo.verizon.net
    SSL: on (Port 465)
    Authentication: Password
    user name:johnsmith
    Password: current password for account
    Save all settings and check for new email. Good luck.

  • How to setup DBI for SCM?

    I need DBI setup guide for SCM & DBI develpment guide (i.e. Dashboard,Ad-hoc reports,DrillDown) one of our biggest client POC?
    Regards,
    Mukarram

    You probably want Fusion Intelligence for EBS in order to take advantage of the integrated Siebel Analytics Dashboards:
    Oracle Fusion Intelligence for E-Business Suite Implementation Guide
    http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120fieig.pdf
    Install and configure OBIEE per the installation guide below:
    Oracle® Business Intelligence Infrastructure Installation and Configuration Guide
    http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf
    Otherwise, use the DBI installation guide for setting up DBI:
    Oracle Daily Business Intelligence Implementation Guide
    http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120dbiig.zip
    If you are using ASCP in your SCM environment, there are some cool new OBIEE based Control Centers in the controlled release of 12.1 for ASCP:
    12.1 APS Installation Notes
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=727535.1
    Oracle Advanced Planning Command Center Release Notes. Release 12.1
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=566094.1

  • How to setup comis. for future account

    our local cuurency is JPY, we configured a future product type 903, the commission is 500 JPY per lot for future, if we buy 3 lots, then it will be 1500 JPY
    anyone know the steps to setup commission for future accounts

    Hello erinfromla,
    It sounds like this article will be useful for you.
    iCloud: Set up iCloud Mail on your devices and computers
    http://support.apple.com/kb/PH2621
    Make sure that you're setting the account up through System Preferances:
         "2. Choose Apple menu > System Preferences, then click iCloud and sign in with either your Apple ID (the one you use with iCloud) or your @icloud.com email address."
    That should get you up and running.
    - Griff W.

  • Hello there. Any tips for an affordable AVCHD camcorder for Final Cut Pro X?

    Hello there.
    I am enthusiast for the new Final Cut Pro X.
    I am now starting to learn with iMovie '11 and I would like to buy a AVCHD camcorder. It should be affordable and compatible with iMovie '11 and Final Cut Pro X. Any tips? I live in Italy.
    Thank you in advance.
    Gianluca

    I use an SDT 750 and an AC 90, both Pansonic cams, both are set to shoot 1920 x 1080 50P.
    FCP X works just fine with this footage as does interlaced.
    If you Mac is fast enough you won't need to transcode to Prores/Optimise for simple Projects it works directly with imported media.
    Al

  • Is it possible to get high quality result in FCE (Sony AVCHD camcorder)?

    i have a Sony HDR-SR10 camcorder (AVCHD) and i import directly my footages in FCE. I export video using the Quicktime with H264, and then burn the result on a DVD using iDVD or Toast. With that method, i can obtain good quality in the STATIC images, but during the panoramic movements of the camera the final result (i mean a DVD on my cathodic TV) is disappointing, with a "jerky" rendering.
    You can download on my iDisk an exemple of it at: http://public.me.com/leclercqpascal
    When i compare with the same sequence treated on the PC Sony's software, i find in the latter case a perfectly smooth result.
    The problem is the same when i import from the camera to iMovie 09.
    Help welcome, because i would be disappointed to resort to a PC software!

    You may want to post this question on Final Cut Express board where you might get better answer, but using H264 in the middle to export to DVD authoring seems to be the problem. Your video seems to be a 50i PAL format, which FCE or iMovie is capable of handling, but if you export to h264 which cannot handle interlaced video you'll end up with a 25p video and DVD won't show the smooth motion. Instead of h264 try using AIC (Apple Intermediate Codec) for export and make DVD from it.

Maybe you are looking for