How to setup FireWire in a local network on my Satellite P300 -17S

On my Satellite P300 -17S, I can't get my Firewire set up in a local network.
Checking the device everything seems to work well, but Vista does not give me any possibility to set up the local network using the cable between 2 computers.
Can anyone tell me how to go about this?
Thanks

I didnt tried it yet but maybe this article can help http://support.microsoft.com/kb/927827/en-us

Similar Messages

How to setup not start cf9 local server on PC startup of VISTA OS

how to setup not start cf9 local server on PC startup of VISTA OS...? How to startup it manualy later if I wanted to?

The same way you would for any other Windows service: use the Services app in your Control Panel.
Adam

How to print a report on local/network printer(Sample Code)

Hi forms Gurus,
I'm looking for sample code witch allow to print report on local/network printer from Forms builder.
Plz help! it's very important.
TYAG.

Armand,
for Forms and Reports 9i, the only chance is to configure the printer as a network printer that is accessible to the Reports Server. In this case pass the printer's network name as desname and destype=printer as the Reports destination (e.g. desname=\network\printername destype=printer).
Alterantively, there exist an unsupported utility orarrp that you can get from the otn.oracle.com/products/forms web page.
Frank

How do i go beyond the local network?

hey, i'm making a mini chatserver thing, and i've gotten it to work on the local network, but i was wondering if i could extend it to beyond the local network. is it possible to do this with j2se?

Hey, i looked online at stuff, and i saw that because
computers that i use use a private ip, i need to mess
with some NAT and subnet mask thing to get it to
work. can someone point me on someway i can do the
whole private to public ip thing with the NAT stuff?
(maybe i have it backwards).I already told you, you MUST have a public IP.
What you read above is referring when YOU control the routers and network. Then your network cloud HAS a public IP. So you can set up forwarding so that it works.
Do you control the network at your school? Does your school even have a public IP?
Do you have a public IP at home on the router that connects to your broadband ISP?

How to setup once an Airport home network and keep it alive?

Hello!
I have the following hardware setup:
1 - A Macmini 2009, Ethernet wired to my router which allows the connection to the internet;
2 - An HP Deskjet printer, USB connected to the Macmini;
3 - My wife's laptop PC, WiFi connected to my Mac.
My Macmini handles the internet connection the traditionnal way (Ethernet and PPoE) and has a static IP on it.
(Why a Static IP? Because I run my own Webserver.)
I set up a WiFi Home Network in order to allow my wife sharing both my Internet Connection and the Printer Connection.
Everything run well: fast and smooth. The PC has Internet and Printer access.
Problem is:
After each restart, I must re-create the Airport home network.
System Preferences-->Airport doesn't memorize the name, parameters and credentials of this network.
How can I fix this?
Many thanks in advance for your replies!
Best regards
Gerry

If your router is wireless, you should probably use the laptop to configure it to take care of the network (i.e. have the router distribute the IP addresses). Then you can connect your computer to it via the LAN port on the router. Otherwise, you would have to set up your computer to "share its Internet connection" (via Preferences/Sharing or Preferences/Network not sure). I don't think you need to create a network for this.

How to preview php scripts on local/network browser?

Im teaching myself php. I just want to be able to write
simple scripts and test them to make sure they work.
How to??

weazledude75 wrote:
> Im teaching myself php. I just want to be able to write
simple scripts and test them to make sure they work.
>
> How to??
You need to install a web server (preferably Apache) and PHP
on your
local computer. For Windows, Apache is available from
http://httpd.apache.org/download.cgi.
Use Apache HTTP Server 2.2.6. The
main page has a download link for Win32 Source. Don't use
that, but
click the Other Files link immediately below it, and follow
the links
for binaries and win32. The file you want is called
apache_2.2.6-win32-x86-no_ssl.msi.
Once you have downloaded it, just double-click, and install
like any
other program. When you come to a screen asking for server
information,
enter "localhost" (without the quotes) in both the Network
Domain and
Server Name fields. Otherwise, the default values are all
fine.
There are instructions for using the PHP Windows installer on
my site at
http://foundationphp.com/tutorials/php_installer.php.
Apache and PHP are preinstalled on Mac OS X Leopard, but are
not enabled
by default. To enable Apache, go to System Preferences >
Internet &
Sharing > Sharing, and select Personal Web Sharing.
Instructions for
enabling PHP on Leopard can be found on my site at
http://foundationphp.com/tutorials/php_leopard.php.
That's a brief outline. You can find much more detailed
information in
my books, the details of which can also be found on my site.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

How to setup Express next to fixed network (for audio only use)

For reasons I shall not explain here I want to keep my existing fixed netwerk (which is connected to my DSL cable modem) and install my new Airport Express on the same computer. I will only use the Airport in this configuration to connect iTunes to my stereo. Can anyone help me setup the netwerk configurations?
The existing DSL cable modem has DHCP capabilities, which I use for dynamic IP configuration on the fixed netwerk. My cable modem is 192.168.1.10 and my computer normally 192.168.1.11 (subnetmask 255.255.255.0). I sometimes hook up a laptop which becomes 192.168.1.12.
How should I configure the Airport Express itself (using the Airport configuration assitant or Airport Admin Utility) and how should I configure the wireless network?
BTW, the Express does work fine when connected directly to the DSL cable modem (with the fixed network disabled). However, the cable modem is far from my stereo.

I struggled with this for what seemed like days. Reading posts, seeing if anyone had an answer. Then I logged onto my router and found that the firmware was out of date. I updated the firmware, went through all the recnfituration and used the same security key that I had before and after reboot/reboot of the router it connected to the AirPort Express, now over 12 hours later it has stayed connected, streams music flawlessly. You might wantt to check this out and seei f it will work for you.

How to contact Internet from my local network?

I'm able to get onto the Internet by piggybacking on a nearby open LAN.( I am not a new user, but I'm not a computer scientist.)
This is a desperation act because I can no longer connect to the Internet via Earthlink, my ISP. I have checked every aspect, physical connections to switching from my G5 to my iBook and back again to configure my Airport Extreme base station. I have even switched AEs. I have changed my own network stats. I have replaced the phone wire. I have changed routers. I have even changed modems, but I was unable to program it, thanks to missing instructions mostly meant for Windows users anyway.
I am using a Broadmax DSL modem from Earthlink, and have spent close to two hours on the phone with 3 techies. They really tried to help.
When I mentioned my phone line was from Verizon I heard ununderstandable muttering. The paranoid thought came to me: Was Verizon sabotaging Earthlink to get its customers to switch? How's that for paranoia? I even called Verizon to switch to them, but they are total incompetents -- the techies are good, if you get a good one, but the rest of the outfit haven't yet figured out what to do with two tin cans and a length of string.
The Earthlink techies and I finally agreed it might be a bad modem and another is on the way to me.
I am not confident.
My first and original modem, the Broadmax, could always be fixed by going through the unplugging it for a few seconds or hours, and then I'd have no problems for many months, until I went away and unplugged it. Getting back on the Internet was a nightmare.
The phone line, DSL, is OK. I can make voice calls over it, but the DSL just isn't there.
Having tracked all, and I mean ALL, the usual suspects, I am on the point of hiring an Apple guy to come in and help me. But I would appreciate any advice from someone knowledgeable about this situation.
G5 iMac, 1.8 mHz; 2 G3 ibooks; G4 PowerBook Mac OS X (10.4.6)
G5 iMac, 1.8 mHz; 2 G3 ibooks; G4 PowerBook Mac OS X (10.4.6)

OK.

How to connect my macbook with local network

hi,
i would like to connect my macbook with the localnetwork. please guide me how to do it

If you are attempting to share your iPad mini's cellular data connection with the MacBook, please check out the following Apple Support article for additional details on how to do so.

How to setup a custom background in network shared folder Server 2012

We have a Server 2012 acting as Domain server, and also has a shared folder. The client computers are Windows 8.1. Now I need to set up a picture as the background of the shared folder, and I want all client computers to see that picture when open it. How
can I do that?
I tried this solution but did not work:
Create a desktop.ini fine inside that folder and put following contents,
[AveFolder]
IconArea_Image="C:\images\folder1.jpg"
Once it is done reboot the machine. This folder will be visible with the sepcified image,
Please help me, thanks guys!

Hi,
As you said it will not work since Windows Vista. I've seen some third party appliations could help change the background of a shared folder.
If you have any feedback on our support, please send to [email protected]

How to setup WiFi to a wired network?

Can anyone help me with what I need for setting up WiFi to a wired network. Do I need a wireless adapter?

See Chapter 18 in the iPod Touch Users Guide. It can be found here:
http://www.apple.com/support/ipodtouch/
If you are trying to create a Wi-Fi network you will need a wireless adapter. There is a wiki which can get you started located here:
http://www.wikihow.com/Create-a-Wireless-Network

How to screen share outside the local network

I'd like to screen share and be able to make changes to a family iMac that resides in another country. Is this possible with any Apple software or must I go somewhere else for this kind of functionality?

TeamViewer should get the job done for you just fine. I'm currently using it across my iMac, MacBook, and iPad. Because it has to relay the connection over the internet it can be a little sluggish at times. Hope it helps.
http://www.teamviewer.com/download/index.aspx?os=mac

How to setup the local testing server ??

hello, what do I need to install first before I can setup the
testing server in dreamweaver 8? I have download apache2 triad,
mySQL, IIS 6...
Where should I download the correct version of mySQL because
I need to test my php scripts locally which has something to do
with database?
How do I configure these on the testing server setup
Connection Name - what should I input here?
MySQL Server - and this?
Username - where do I get one?
Password - where do I get one?
Database - gets an error saying "HTTP error code 404...
1) There is no testing server running on the server machine.
2)The testing server specified for this site does not map to
the
http://localhost/...... ??
Please Help.. Thanks in advance!

criticalx wrote:
> I'm using the apache2triad for the mySQL.. I s there
anything I did wrong on
> my configuration part? Thanks... "I only need to test my
site locally"
I have never heard of apache2triad, but I've just had a look
at the
apache2triad site, which says: "It is recommended that only
experienced
users, with a vast knowledge of how networks, and its
components (Apache
Web Server, ect.) should install this software. It IS NOT
your average
software; a lot of time, patience and effort are required to
maintain
such a server."
Setting up a local testing server is not difficult, but it
does require
a basic understanding of how a server-side language like PHP
works.
As I said before, you must always store your files in the web
server
document root. According to the apache2triad documentation,
this is C:
\apache2triad\htdocs\. Unless you store your files there, or
in a
subfolder of htdocs, nothing will work.
---LOCAL INFO----
Site Name: login
Local Root folder: C:\apache2triad\htdocs\login
checked refresh local site automatically
default images: C:\apache2triad\htdocs\login\images\
Links Relative to: "document" - this is correct
HTTP address: leave blank
cache: enabled
---REMOTE INFO---
None
---TESTING SERVER---
Server Model: PHP/MySQL
Access: Local/Network
Testing server folder: C:\apache2triad\htdocs\login\
URL Prefix:
http://localhost/login/
mySQL connection:
conn name: connLogin
mySQL server: localhost (do not use
http://)
username: root
password: mypassword
Database: login
David Powers
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "Foundation PHP 5 for Flash" (friends of ED)
http://foundationphp.com/

How to set up with cacheing DNS for local network?

Our new Lion Server has a static IP Address pointed to over the internet by our registrar's zone file. Planning the Lion Server installation process with the intent of hosting Web, Mail and Open Directory services to a small number of users who are nearly all located off-site. I do also want Lion Server to be a caching DNS Server and DHCP authority on the local network to replace what dnsmasq does on our current Linux server.
I am looking forward to offloading some of the lower level Linux administration tasks and putting myself in the hands of the Lion Server Setup Assistant and Server App :-) but at the same time don't understand some of its assumptions and fear having to spend a lot of time experimenting and re-installing.
So, specifically, I want the Server App to know that my Lion Server has a "Host Name for the Internet" but that the DNS it sets up will not be the DNS for my zone - I will be managing that through my registrar's interfaces.
Second problem is my fnot understanding what name space devices on the local network will / should use. e.g. The Linux server will be available for backups etc on the local intranet (and optionally have a static ip address on the Internet) but MacBooks, PCs, iPads and iPhones will be served ip addresses by the Lion Server's DHCP. So will / should these dynamic devices have their machine names fully qualified by our domain name with RFC 1918 style ip addresses or something like .local? How do I tell this to Lion's Server App / Setup Assistant? How easy is it to update these initial settings later?

You do indeed need to have a master zone on lion server. There's no way to get around that since Open Directory depends on Kerberos and Kerberos depends on the DNS. LS scripts may see that the rDNS record exists, but I highly doubt that it'll auto configure everything for you... and given the number of possible variables, I bet that even if it worked something would need additional tweaking.
Sounds like an interesting lab excersize. You should try it on a test server!
Again... you just need to folow the set up procedure that Lion Server presents you with.
It won't be smart enough to see your external records and use them to configure a key distribution center for your OD.
As far as your caching needs... Could you set up your DHCP server to set the DNS server setting to show your internal server as the first hit, and your external as the second? That way when the client requests a resolution it'll not get a hit on your local server but will from the external?
The question then is how long will it wait for a response from the first server? Or will the first server respond with "I don't know" sending the client immediately to the second.
The server set up that I have works similarly. I have an internal master DNS that is replicated to a secondary. The first DNS has an A record (community.server.com) that points to the INTERNAL ip address of the secondary server that's also running the web service. The first server is running DHCP. It tells the clients to use the first and second servers as it's DNS lookup.
Now... Externally, my registrar hosts an A record for community.server.com that points to the external IP address of my router which then forwards the request to the proper port on the internal network.
This way, the local clients internally look up and get a response locally when they go for community.server.com. Externally, clients that look up community.server.com get the external connection to the router in my school.
Yikes... I fear that this is as clear as mud!
-Graham

Mac was hacked on local network by roommate-how to re-install my files w/o reistalling command/terminal hack codes?

I have a Mac Book Pro running latest version on Mountian Lion
Processor 2.3 GHz Intel Core i7
Graphics Intel HD Graphics 4000 512 MB
Memory 8 GB 1600 MHz DDR3
Software OS X 10.8.3 (12D78)
My roommate hacked my Mac. I assume he did this via an old Mac he use to have access to, & then made changes via his PC & his Android phone (can tell by comparing Terminal to Access & Little Snitch) & since the codes I found all were as my User name & as Root Access... Thinking he started gaining access through the weak spot via Reboot Disk & Terminal access from there-though he denys it completely... (But I printed it all out) He accessed ALL my passwords & at the time I didn't know that as I kept trying to change things & lock things up... he was getting hidden files of EVERYTHING I WAS DOING & had remote access to my system, anything I did & camera on my mac.
He hid files with sudo codes in Terminal & had constant any access via remote access, booting, starting or turning off as well as secretly deleting any files or notactions he wanted. He was ghost.
So now not only did he has complete access to my computer & camera... He would enter my room & take what he wants & then access my computer to delete EvoCam files/videos/pics.
He also has been tracking everything I do on my computer and assume he has figured out how to hack my phone by now as well.
He will be an EX-ROOMMATE as soon as I can legally get him out. But until then I am stuck. (Buying locks for all 3 of my bedroom & closet room access doors too!)
I currently have him blocked off the local network & internet. But that won't last long.
I jcopied over to my external hard drive all my important info, pics, files and just deleted the rest.
It took many hours to get my mac to actually delete everything (I HOPE) & then finally let me re-load Mountain Lion. Now I am slowly adding back programs. I think he was also using the Windows interface & some Windows program to sneak past my firewall & all the stops I put up to block him off local.net.
Changed ALL my passwords again-already. Hopefully by zeroing out my hard drive numerous times that it deleted his lines of codes.
Tested in Terminal some of the lines of codes he used (Just lsof & ls -a, history, etc)
SOOO MY QUESTIONS ARE:
Is there a way to let him use the network without him being able to access my Mac??
I have ALL ways I can find to turn off any file sharing, local or remote access... but I did that last time & he figured out a way around it!
My Nework is on a NETGEAR Range Max N wireless router. I configured it this time via Ethernet instead of by Wireless-made my Mac only machine to make changes & only via Ethernet access. (Gave Ethernet & Wireless each their own IP address.)
I also turned off the remote access again, locked in IP addresses to specific machines/phones/Pads... IE 192.168.1.2... on Router.
I also installed Little Snitch, Have Tech Tools 6... Need a good virus protection... (did find some crap only in a couple of my emails when I used one I downloaded as a trial before the re-format... )
Worried about installing Windows again.
How do I block him from getting root access again?
How do I keep him from hidding any codes?
Thank you in advance for your help & suggestions!

Well when he hacked it.. he took control of root & istalled a couple of programs from what I could tell-unforchantly don't have print outs of that.
He added ARDAgent, .user.sbin/aonotifyd lsoscript -e 'tell app ARDAgent diskutil list pdisk ls root ls local.com sudo ~/ .bsh.profile... was the part I started printing at...
WHAT THE HECK IS: jbapps-
then he went into mdworker, then added private screensharing.agent.launchd,
then private event
then private mdsDirectory.db
then private messages mdsDirectory & se_SecurityMessages, & Private screensharing agent
then accessed root access & got a list of every password that I had & used...
Then installed Microsoft office \2011\Office\uniscribe.framework\Versions\12\Uniscribe
the WLMUser.framework then accessed atcp:8254
then core tools
the path/to/file.txt
then netbiosd
then networksetup
then newsyslog
the defaults write com.apple.finder AppleShowAllFiles TRUE
RSA_SecurID_getpasswd
NetBootClientStatus
diskmanagementd
aosnotifyd
asr
automount
avbdeviced
PasswordService
pboard
ocspd
ntptrace
postalias
pwd_mkdb
racoon
sercurityd
slapd
snmetadump
systemkeychain
systemsetup
tcpdump
universalaccessd
autopen
bootpd
Microsoft SyncServicesAgent
Code Signature & Resources
osascript]remote management
lastdate
USER_IS_ADMIN=ADMIN
hostname & domainname
NetAuthAgent.app/Content?MacOS
chflag hidden /mach_kernal
sudo password root
man sudo list
finger lst User EventAgent launch User Event Plugins...
and on & on & on...
He got drunk...really drunk one night & told me that he saw something in my room... and then I found he had hidden the Facetime camera & an account had been setup which I never set up...
A couple of programs got installed that I never install too. Plus when I went to reinstall my Mac there were four choices listed of places I could "istall Mountain Lion" to. One listd was my thumb drive-duh,, one was the hard drive, one was a PC Windows Drive??? the other was the partioned Reinstall part that Lion put on...
Yeahhh... going to have to put the locks on all 3 doors.. the router is in my room as well as the old Mac & the cable modem. But the internet cable runs through his room to get to mine....
I just have to get him out as soon as I can without cleaning me out first & setting it back up to where he has access to my machine or my phone.
I wonder if he has hacked my phone... is there a way to tell?

How to setup FireWire in a local network on my Satellite P300 -17S

Similar Messages

Maybe you are looking for