How to setup Guided Procedure Monitoring in NWA?

Hi I have NW2004S patched to SP11.
When trying to open the Guided Procedure Monitoring in NWA
NWA, Monitoring>Guided Procedures
I get the following error:
Guided Procedures JMX provider is stopped in the target system. Start cafeugpmodeljmx~eap application
Guided Procedures JMX provider is stopped in the target system. Start cafeugpmodeljmx~eap application
Cannot retrieve basic info: :name=BasicInfoProvider,component=cafeugp not in repository
However, the application cafeugpmodeljmx~eap when you go to NWA applications tab.
Any suggestions on what must be done to configure the monitoring?
I need to do this to monitor / debug the GP.

Go into Visual Administration and check if the application has been started. The path is Services -> Deploy -> Monitoring Configurator. Expand that and see if the jmx.eap application is running. If not, then start the application.
Thanx,
Mahesh

Similar Messages

How to export Guided procedure - Initiator to RFC as an export parameter

Hi All,
How do I capture the Initiator, Owner and Oversee of my Guided procedure and bind it as an output parameter of a Callable object?
I need to this information to be sent to RFC so that I can perform the dynamic agent determination and send the agent back to Guide procedure.
Thanks in adv.
Edited by: Prab Vad on Sep 24, 2009 6:35 PM

Based on the UI dialog for Export XML, it looks like you'll first want to set an XMLExportPreference to copy either optimized or formatted images, and then choose and image type. So,
objDoc.xmlExportPreferences.copyFormattedImages = true;
or
objDoc.xmlExportPreferences.copyOptimizedImages = true;
followed by
objDoc.xmlExportPreferences.imageConversion = ImageConversion.JPEG
or
objDoc.xmlExportPreferences.imageConversion = ImageConversion.PNG
This help page describes the difference between optimized and formatted images: InDesign Help | Exporting XML
That should get you started. You may need to play with some other options to get the output you want, but that's the idea.

How to remove guided procedure instances?

Hi
how do I permanentely remove all terminated and completed guided procedure instances? I am extensively testing and accumulating lots of old instances.
Thanks very much for your help!
Best regards
Bettina Hepp

Hi Bettina,
What you need to do is to go to the Administration workset and choose Archiving and Deleting -> Maintain Process Templates from the contextual panel.
In the Global Settings tab page you can define such general settings for deleting or archiving process instances, such as for example archiving process older than 2 weeks or deleting completed process.
In addition, you can define specific settings for specific templates. Go to the Process Template Settings tab page, there browse and select the process you want to delete.
On the Custom Settings for Process Instance panel, you have to specify settings for the process if you want to define custom settings.
In addition to scheduled archiving and deleting of instances, you can start an archiving or deleting operation for selected process instances instantly. Again in the Administration workset, go to Archiving and Deleting
-> Start Archiving.
Hopefully this will be of some help
If you have any further questions, just write back
Greets,
Petra

How to setup the system monitoring using sol man ?

Experts
can any one advise me how to setup the below monitoing.
Background jobs (SM50)         - Long running jobs >24hrs
Email/Fax transmission(SCOT) - alert if there is any failire/errors in the email transmission
iDocs Processing(WE05)          - Data Transfer failure
Enque locks (SM12)         - alert if there are any Lock entries which are older than 2 days
Update Records(SM13)         - alert if there are any update request older than 90 days
Regards
Karthi

Hello Prasad
Thanks a lot your information. I wil go thorugh the documents which you have mentioned.
I have configured few alerts and unfortunately I am still struggling to configure these alerts. I am also not able find whether I will be able to configure these alerts are not. Any advice/tip would be a great help.
if I get some solution, definately I will share with all.
Regards
Karthi

How to get Guided procedures DC into track

Hi All,
I am trying to implement the functionality mentioned in the thread
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d74ada-0c01-0010-07a8-8c118d408e59?overridelayout=true
But it says in order to implement that I need to import Guided Procedures related DCS and I dont know which Software component consists of all the DCS which i need to check in and import into track so that when i open sap.com_SAP-EU_1 component i can see all the GP related dcs.
Plz let me know the solution
Thanks
Bala Duvvuri

Hi Bala,
SAPPCUI_GP is the SCA which contains the related GP dc's.
Regards
Sreedhar

How to put Guided Procedure into EP7?

Do we need to do an installation of Guided Procedure on EP7 so that those GP tabs will show up?
Docs needed.
Thanks!!

Some of the help links if you want to get started.
Check these..,
wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/dipankar%2bsaha
forums
/thread/40632 [original link is broken]
/thread/107379 [original link is broken]
help docs
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/0034e14db01a85e10000000a422035/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/68231834cf4688e10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/97/08ae42e5adcd6ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/3bfd6765524903e10000000a1553f7/frameset.htm
Here you will get all the End to End elaerning stuff for GP.
https://www.sdn.sap.com/irj/sdn/bpx-elearning
Goahead.

How to recover Guided Procedures Workitems

Hello,
We have Guided Procedures Integrated with the UWL for Workflow and some Workitems got deleted accidentally for all users . Is there a way those workitems can be recovered ?
Any help would be highly appreciated.

Hello,
The tasks may still be available in Guided Procedures --> Runtime --> Task that require my Action.
If they have been deleted from here also, it will not be possible to retrieve them.
Thanks and best regards,
Carl Connolly
Senior Support Consultant - Netweaver Web Application Server
AGS Primary Support, Global Support Centre Ireland
Guided Procedures trouble shooting guide:
https://
www.sdn.sap.com/irj/scn/wiki?path=/display/jstsg/%2528gp%2529home

How to setup dual external monitors on a MacBook Pro 15" A1398?

Need to setup dual monitors for my new MacBook Pro 15" Retina Display A1398. I am in instructional designer and need the larger display from dual monitors. I think the best way is to connect using a Thunderbolt to HDMI adapter in the two Thunderbolt ports or HDMI out of the one HDMI port and the other using a Thunderbolt to HDMI adapter. I have two Thunderbolt ports, two USB ports and one HDMI port. How do I setup OS X Mavericks for this as well. I want to run it in clamshell mode. Wondered if there are any better or easier ideas?
With peace and love,
Sam K.

Hi! I recommend you using both thunderbolt ports with their HDMI adapters, i don't know why but in my case it has worked better than having one monitor connected on one thunderbolt port and another on the HDMI port. As for the clamshell mode I recommend you this articles: Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display and http://osxdaily.com/2012/06/08/quickly-enter-clamshell-mode-with-an-external-dis play-in-mac-os-x/.
This are a few recommendations:
1. Use a usb mouse and keyboard, because sometimes bluetooth ones are not that trusty
2. You could buy one of the fancy things (you can see one on the second article) that hold your macbook up to prevent overheating. If you can't afford one or you don't to buy one, you can prop your macbook with some books on the side of the union between the lid and the keyboard (i don't know the word in english) and a very heavy one on the other side.

Help Needed: How to setup external procedure in listener on 11gR2

I have successfully installed 11gR2 RAC on two nodes RHEL5.3, I noticed that the default configuration has something different from previous versions (such as 10gR2 or 11gR1):
(1) listener.ora is under $GRID_HOME/network/admin (a.k.a under Grid tree) not under $ORACLE_HOME/network/admin, and have a new file called "endpoints_listener.ora"
listener.ora under $GRID_HOME/network/admin:
LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))) # line added by Agent
LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1)))) # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON # line added by Agent
ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON # line added by Agent
endpoints_listener.ora under $GRID_HOME/network/admin:
LISTENER_NODE41=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=node41-vip)(PORT=1521))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.10.41)(PORT=1521)(IP=FIRST)))) # line added by Agent
(2) If I put listener.ora under $ORACLE_HOME/network/admin like 10gR2 including EXTPROC, then restart RHEL servers, the listener.ora under $ORACLE_HOME/network/admin doesn't take effect rather the listener.ora under $GRID_HOME does; however if I run "lsnrctl stop" and "lsnrctl start" the listener.ora under $ORACLE_HOME/network/admin will take effect.
listener.ora I added later under $ORACLE_HOME/network/admin:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = node41-vip)(PORT = 1521)
(IP = FIRST))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.41)(PORT = 1521)(IP = FIRST)
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
(PROGRAM = extproc)
Questions:
<1> How to correctly setup extproc correctly under 11gR2?
<2> Will my way in (2) will affect the SCAN single IP access functionality? (I assume SCAN is enabled at least partially by listener.ora under $GRID_HOME such that client can use simpler connection string)
Thanks in advance.
Edited by: user5852271 on Nov 18, 2009 9:04 PM

user5852271 wrote:
I think the document you mentioned is for 11gR1 not for 11gR2. If that is the case, you could go to the 11gR2 library and check the Networking docs yourself at http://www.oracle.com/pls/db112/portal.portal_db?selected=4&frame=#network_management
>
I felt that the 11gR1 should be named 10gR3, and 11gR2 should be 11gR1 because 11gR2 introduced a lot more new features.Good one. You should join Oracle Marketing.

Lync 2013 Web Scheduler How to setup guide

Hi,
Can you please tell me the step by step guide to configure Lync 2013 Web Scheduler
Thanks

Thanks for reply,
I have already follow the link that you have mentioned
http://cmcgreanor.wordpress.com/2012/11/14/lync-2013-web-scheduler/
But how can i do the following from the link.
There is one more step
Now it is time for the BootStrapper:
Run and check the results for the IIS URL Redirect.
Can you please help me on it
Thanks

Guided Procedures & Monitoring..

Hi y'all,
I'm doing little research on the different possibilities of reporting on running and completed GP's.
- In know that you can do that via your own work center or via the option 'maintain processes' via the administration workset.
- I have also red about the GP Monitor which you an install. I havent done this yet, so I dont know how this looks.
- Finally I red about transaction SWF_GP and table SWFGPDEPLOYVIEW in the R/3 system itself.
Basically I have two questions:
1. Does anybody have tips from practice on how to do reporting on running GP's?
2. I have made some GP's and they appear in my work center, however they do not appear in SWF_GP. Does anybody know when GP's are visible in this transaction?
OK, any input would be appreciated, thanks!
Erik

Hi Erik,
Just to kick it up to the top again ;-). Did you post your question also in one of the portal forums? Could be somebody knows there.
Regards,
Martin

How to setup approval procedure for extended transport management system?

Hi,
We got dev and QA system in our ECC system landscape.
We got extened transport control activated between dev and qa system.
In cosolidation taget group i got 2 clients from dev and one qa golden client listed in this target group.
Havoing said that, i would like to set up approval process in such a way that before the transports released from dev golden client,they should pass the approval steps.
How would i configute that?.I was trying to search for notes or help links to help me with this task.
But i could not find anything.
Any help would be appreciated .
Ram

Hi Ram,
You can achive this by configuring the transport workflow.
Here is link from sap help.
http://help.sap.com/saphelp_nw2004s/helpdata/en/5a/34bd66c03d11d2851c0000e8a57770/frameset.htm
-Pinkle

Location of the attachments in Guided Procedures

Hi,
does anybody know the location where the attachments from the Guided Procedure Runtime are stored?
Are they stored somewhere in the KM or in the database/filesystem directly?
In the Guided Procedure Monitoring i can see the attached documents, but i need an overview over all attached documents in the gp process instances for one Guided procedure.
Thank you in Advance - Regards
Martin
Edited by: Martin Fister on May 6, 2009 5:14 PM
Edited by: Martin Fister on May 6, 2009 5:15 PM

Hi Martin,
the standar "Attachment" functionality in GP stores the file in the database, may be you can get the table names asking here in the forums, anyway you can create your own attachments page using UI Patters and integrating it with the KM so the attached files will be stored there.
This tutorial will help you:
[Integrating KM with CAF UI Patterns|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/dabdb3ea-0c01-0010-df8f-ffd2755c74c5]
Regards,
Marco.

How to set SNMP Counter Monitor on weblogic61

I set a SNMP Counter Monitors on weblogic6.1sp2, I want when the servlet xcj3 is
reload more than 2 times
then send a trap nitification, the attribute I set is:
Monitored MBean type: ServletRuntime
Monitored MBean name: examples:Name=xcj3,ServerRuntime=examplesServer,Type=ServletRuntime,Location=examplesServer
Monitored Attribute Name: ReloadTotalCount
Polling Interval: 1 second
Threadhold: 2
offset: 0
modulus: 0
the SNMP Counter Monitor I set cannot work, can anyone tell me what wrong it is??
thank you very much!!!
by the way, the SNMP Log Filter I set is work well on my weblogic6.1.

Jing,
Could you please post how your config.xml looks after you set this Trap?
Also, once you configured a monitor trap, you need to re-start the admin
server. For more information on how to setup a counter monitor refer to
the BEA docs at,
http://e-docs.bea.com/wls/docs61//snmpman/snmptraps.html#1071147
Thanks,
-satya
xcjing wrote:
>
I set a SNMP Counter Monitors on weblogic6.1sp2, I want when the servlet xcj3 is
reload more than 2 times
then send a trap nitification, the attribute I set is:
Monitored MBean type: ServletRuntime
Monitored MBean name: examples:Name=xcj3,ServerRuntime=examplesServer,Type=ServletRuntime,Location=examplesServer
Monitored Attribute Name: ReloadTotalCount
Polling Interval: 1 second
Threadhold: 2
offset: 0
modulus: 0
the SNMP Counter Monitor I set cannot work, can anyone tell me what wrong it is??
thank you very much!!!
by the way, the SNMP Log Filter I set is work well on my weblogic6.1.

Guided Procedures On Adobe

Hi,
i wish to know how to implment Guided Procedures on Adobe..
but currently i not sure how it start..
hope anyone can guide me on how to do it...
as my requirement is the
1st step: PDF form start the process
2nd step: display out the data frm the PDF
3rd step: save the data into database.

hi
Did you install the Adobe LiveCycle Designer. if its no it will be available in http://service.sap.com/swdc.
Procedure :
1. In Adobe LiveCycle Designer, Create a new Form template
2. Go to the Body Pages tab page, and create the following Text fields
      -- To create a text field, use menu Insert -> Standard -> TextField.
     -- To modify its binding name, use menu Object--> Binding
     -- To modify the value type, use menu Object --> Value
3. Create a button with the folowing parameters using menu Insert > Standard> button
4. You can enhance the layout of your form template.
5. Finally save the template as MyFirstFormProcess.xdp and close it.
In Guided Procedures:
Procedure:
1. Launch GP design time and choose Create Callable Object from the contextual panel.
2. Enter the following data: like
       Type                  : select Interactive Form
       Name                 : enter CO4 : Application Data Form
      Description          : enter a brief descrioption of the Callable object ,as shown in the example below.
    Original Language   : choose English
     Location               : Choose folder My First Process
3. Choose Next.
        a) To select the form template that you have created , choose Change
        b) Browse the file system to select the file.
        c) For Template Adapter, choose Adobe Forms.
        d) For Language, choose English
        e) For Encoding, select the same encoding that you used when you created the form template.
        f) Choose OK.
4. Choose Next.
5. Choose Next.
6. Choose Next.
7. Choose Next and then Finish and Open.
8. Choose Activate Callable Object from the contextual panel.
plz reward points
Regards.
Sureshbabu M

How to setup Guided Procedure Monitoring in NWA?

Similar Messages

Maybe you are looking for