How to setup Harmonized Tariff Schedule in RMS

Hi All,
How to setup HTS record in RMS online?
I'm having problem creating new record for HTS online. Error message "Invalid chapter number for this importing country" is displayed.
Regards,
Aris

Put quotes around the dots in the format string like this
FMXXXX"."XX"."XX"."XX
Note the quotes are not around the XXs but around the periods "."
In the front end, the HTS code is entered without the trailing zeroes and it is amended to match the format e.g. if you enter 4010 and this
is a valid chapter in HTS_CHAPTER then it will in the form apply the format above to make it 4010. . .
Here's the insert statement i used to prevent not a valid import country error in the HTS form.
Insert into HTS_IMPORT_COUNTRY_SETUP (IMPORT_COUNTRY_ID,HTS_FORMAT_MASK,HTS_HEADING_LENGTH) values ('SE','FMXXXX"."XX"."XX"."XX',4);

Similar Messages

How to setup a daily schedule job that will run a PL/SQL procedures every night

I have an update program that will need to run every night, can I setup a schedule job in data server?

Hi Kane,
You can try to use the package DBMS_JOB.
In the package specification is a description how to use it. The parameter called INTERVAL can be used to start your job every night.
Hope this helps...

How to setup management server in oracle 10g database

guys,
i've installed oracle 10g database into my machine. but i don know how to setup the management server (for scheduling owb10g process flows). unlike 9idb, we have an option emca to setup the management server. if anyone of u knows abt it, please help me. do i need to install the grid control just to have the scheduling mechanism? please advice.

Well, it depends heavily on what operating system you're using, what mail server you're trying to install, your network topology, etc. Realistically, this is a question that is probably better asked in a forum for whatever mail server you're trying to install...
Justin

How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete

How can I share my schedule information with my wife on her accounts and devices?

My wife and I have separate accounts in our MacMini and MacBook. We each have an iPhone. She uses GMail. I use Mac Mail. How can I share my schedule information with my wife on her accounts and devices?

It is not advisable to follow the above suggested method. The following will do what you want without complications.
1. On your Mac, go to http://help.apple.com/icloud/#mm6b1a9479 and follow the instructions to share a calendar privately. If you have more than one calendar you want to share you will have to do each individually. You can choose whether she is able to edit it or whether it should be read-only.
2. If your wife does not have an iCloud account she will need to obtain one. When you share a calendar and nominate her to access it she will receive and email. All she has to do is to open the email and click 'Join Calendar'. This will add the calendar to her Calendar app on all devices and on icloud.com without affecting any other data. Again, this will have to be done individually if more than one calendar is involved.

HOW DO I CREATE MULTIPLE SCHEDULES IN ICAL?

Hi, just got my ipad 2 and i have my work calendar on ical through exchange but I want to add a home calendar but cant work out how to add a additional schedule? Help appreciated, the guy in my local apple store said I need to do it via ITunes but i still cant find where? thanks

Shashi,
You need to read about configuring the Catalog services:
http://edocs.bea.com/wlp/docs40/catalog/index.htm
These docs have not yet been moved into the 7.0 doc set but also apply to
7.0.
Sincerely,
Daniel Selman
"Shashi Goli" <[email protected]> wrote in message
news:3d4184cc$[email protected]..
>
Hello,
I have 2 stores in different locations and they each have their owncatalogs (similar
products) and inventory, but I want the user to be able to select thestore in
which he wants to buy. Ex - It could be New York store or New Jerseystore.
>
How can I create 2 or more catalogs and access them in the same Portal?What is
the differentiator?
Regards,
Shashi
Answer appreciated.

How to setup a static IP for a wireless printer

This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it. For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better. At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected". The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
The only way to fix this is reboot, and then the printer shows up again in Preferences. I select it and all is well again...until a few days pass and the same thing happens again. Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use. I also have an Epson Artisan 725 and the same thing happens with it about once a week. Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer. Any help would be greatly appreciated.

You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
If you have AirPOrt Extreme, you could do this:
In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
Start up the AiPort Admin Utility
Go to Network tab
click + in the DHCP reservations
Choose an IP you want for your ATV & Enter the MAC address
From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
It is not a static IP in a true sense, but behaves just like one.
Works great for me...
If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

How to delete the old schedule line release?

Hello,
How to delete the old schedule line release in apo?
Generally GR has to be carry out schedule line release in r/3 which reduces the Schdule line release.
But i do want do GR against old schdule line release instead i want to delete the old schdule line release.
Please suggest.
Regards,
Sunil Patil

Sunil ,
/sapapo/cmds_del is the tcode to deleted sales scheduling agreement confirmations and releases
/sapapo/display_conf is the tcode for displaying sls. sch.agr confirmations and releases
The above two are in the supply chain collaboration menu
/sappao/cmds_sc02 is the tcode to delete sales scheduling agreements . This tcode is in the application specific master data menu
Thanks
Saradha

How to delete the old schedule line release in apo

How to delete the old schedule line release (from current date) in apo which is having schedule firmed?
Please suugest.
Sunil

How is it possible to delete old purchasing schedule lines in APO (that do not exist in R/3)?
Though used successfully before, /SAPAPO/CCR will not reconcile our discrepancy in this case.
Thanks in advance,
Jim

How to setup Charms in a 2 tier landscape ?

Hi All,
We have a two tier landscape i.e only having development and production system so how to setup STMS and all other settings in this type of scenario.
Can we use Virtual system in STMS as a Quality system ? If yes then please guide us and tell me how to proceed as if we dont know how to add virtual system in SMSY in solman. Please provide us with a clear picture and give us detail documentation if possible.

Hi All,
Please tell me as per the SAP standard recommendation is it necessary to have a cycle like DEV->QUAL-PROD for Charms as we are not having any Quality system or Client here in our landscape.
Please suggest a way how to proceed in this case. Please help me out.

How to setup breakpoints in a vector space?

Hi,
How to setup breakpoints in a 2D vector space in NI 7344 and check for them using flex_read_breakpoint_status_rtn?
Thanks.

Hi,
Is Office Communicator something to do with the Word, Exel and Powerpoint Office Package ?
What sort of Screen Names or IDs do you use with that ?
If these are MSN/Live accounts names then it can be made to work for Text Chats but not Video or Audio Only chats
10:38 PM Friday; April 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to setup iChat in a office

How to setup iChat in a office that using Office Communicator as a IM ?

Hi,
Is Office Communicator something to do with the Word, Exel and Powerpoint Office Package ?
What sort of Screen Names or IDs do you use with that ?
If these are MSN/Live accounts names then it can be made to work for Text Chats but not Video or Audio Only chats
10:38 PM Friday; April 20, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to Setup Historical DSC Database on a standalone Server

Hey @all,
I am looking for documentation how to setup a standalone server for the DSC Module(Ver. 8) Historical Database.
My aim is to log all data to this server. The Server will be running Win2K.
Do I have to install the complete Labview 8 software and the DSC Module?
Does a walkthrough exist how to setup a DSC server?
Thx!
Carsten

After installing the runtime you should only have to reboot the computer in order to get the citadel service running. At the point, for citadel purposes, this machine will behave as though you had the DSC development system installed. The 8.0 runtime has no setup requirements...it should only need to be installed. Unlike previous versions, 8.0 requires you to build your application into an executable and the runtime should be invisible to you once you install it. If this is not the case, please post about it so it can be looked at.
If you have specific questions, please post them and I will either try and help you find the answers, get them posted, or answer them myself.
Regards,
Robert

How to setup Harmonized Tariff Schedule in RMS

Similar Messages

Maybe you are looking for