How to setup internal delivery process within internal departments.
Dear All,
I need to setup a special sales order for the following business process:
Internal departments within one PLANT are treated as an internal customers.
Each department orders some goods for purchasing via creation of special sales order (it will be also okay, if special purchase orders instead of sales order be created based on which, sales order will be created automatically).
MRP runs and creates one common purchase order for list of sales orders like above for internal vendor (since there is not stock for ordered goods).
Further, goods receipt is done.
*Deliveries are created from above sales orders, and after goods issue is done, goods are moved from common sloc (where GR was done to), to sloc assigned to internal departments: both slocs are within 1 Plant. *
Could you please advise how to setup such process in SAP?
Regards,
Andrey
Delivery free of charge.
Similar Messages
-
How to setup pin for national or international calling on 3905 phones
Hi,
I have this new project on CME along with IP phones 3905.
I was just trying to find if there is any work around or scripts that i can use for calling national and International number using a pin.
Any help in this regards will be appreciated.Hi Zekeria,
Thank you bro.
What i failed to understand here is that will everyone have same password or can we keep unique passwords for each user.
I understand that this password or pin will work on all the phones but i would like to know can it co-exist with after-hours pin?? -
How to Setup RDS custom property when internal and external domain name space is different
Hi All
I am setting up RDS for customer
My internal domain name is domain.local and my external domain is domain.com
I came across below PowerShell cmdlets on some blogs because my internal and external name space are different
Set-RDSessionCollectionConfiguration –CollectionName QuickSessionCollection -CustomRdpProperty “use redirection server name:i:1 `n alternate full address:s:remote.domain.com”
In above command, remote.domain.com points to which host?
Is it pointing to RD Session Broker
OR
Pointing to RD Session Host servers
I am not sure what above command will do exactly ?
Any help will be highly appreciated
Thanks Best Regards MaheshHi,
It all depends who is accessing the RDS Solution.
If you have a large BYOD or large number of external users, it would be better to use a public certificate.
Have a look at the following script which will simplyfy the configuration of the RDSH hosts with certificates.
http://ryanmangansitblog.com/2014/05/20/rds-2012-rdsh-certificate-deployment-script/
You can use a custom RDP property to hide the Session host names.
Have a look at the following article on configuring certificates:
http://ryanmangansitblog.com/2013/03/10/configuring-rds-2012-certificates-and-sso/
Ryan Mangan | Ryanmangansitblog.wordpress.com | Help keep the forums tidy, if this has helped please mark it as an answer -
How to setup Return delivery?
Hi experts
We create return po and its delivery, the delivery type is RL and in delivery item ,its item category is RLN.
But does such delivery need do pick/pack ? When I try to do Post goods issue, it said it need setup forwarding agent, but on delivery hearder, I can't find its related partner function, It need configure?
For such return po dleivery , which movement type it will use for PGI? after PGI, it will create credit memo or normal invoice as AR?
Thanks
AliceHi Pankaj Singh
One more question, you mean use migo to craete delivery?
Currently, we use me21n- craete return po for reutrn vendor ,2) relase po 3) use vl10b to create delivery
4) try to do pick/pack and PGI. If this operaiton process is wrong? It still need do migo?
I have followed your instructions and add the forward ageng in delivery. Problem is it dodns't need pick and pack , So I do PGI now, it doesn't create material movmenet , only one confirmation serice on document flow. For standard RL delivery type and RLN item category , does it need do pick/pack?
on delivery movement screen, its delivery movement type as 161. but I don't find really 161 movemnet in mb51 after I do PGI. ALso will it craete invoice with it? Now I do pgi, in vf04 , I can't find this document to create invoice. Or I need use miro to create credit memo for return delivery?
Hope to get advcie , seems something wrong or missing?
Thanks
Alice
Edited by: alice zhang on Jul 9, 2008 7:14 AM
Edited by: alice zhang on Jul 9, 2008 7:39 AM -
How to get item being processed within condition
Is there any environnement variable that contains the item like there are for app ans pages?
I would like to use it in item's conditions. The condition would be coded in a package and called many times across items. The problem is now that I have to pass the item's name in the function's parameter.
Any idea?It's not available. We hope to provide this in a future release in order to allow authorization schemes to use generic code, similar to your aims.
Scott -
How to create a CUSTOM AQ internal delivery channel.
Hi,
I want to use a custom AQ internal delivery channel for inbound. Can someone please help me in the configuration details.Hi Manindra,
You can either create a new URI or use the existing one. It's up to your requirement and use case. URI is nothing but the destination location on which B2B thread hear to pick the message and connects to pass the message.
Regards,
Anuj -
How to submit a report ,Passing the internal tables from parent report
How to submit a report ,Passing the internal tables from the parent report ?
The SUBMIT statement executes a report from within a report. i.e. you could have a drill-down which
calls another report. Can only execute reports of type '1'.
*Code used to execute a report
SUBMIT Zreport.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign = 'I'.
seltab_wa-option = 'EQ'.
load each personnel number accessed from the structure into
parameters to be used in the report
loop at pnppernr.
seltab_wa-low = pnppernr-low.
append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
with p_param2 = 'value'.
Other additions for SUBMIT
*Submit report and return to current program afterwards
SUBMIT zreport AND RETURN.
*Submit report via its own selection screen
SUBMIT zreport VIA SELECTION-SCREEN.
*Submit report using selection screen variant
SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
*Submit report but export resultant list to memory, rather than
*it being displayed on screen
SUBMIT zreport EXPORTING LIST TO MEMORY.
Once report has finished and control has returned to calling
program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
DISPLAY_LIST to retrieve and display report.
*Example Code (Retrieving list from memory)
DATA BEGIN OF itab_list OCCURS 0.
INCLUDE STRUCTURE abaplist.
DATA END OF itab_list.
DATA: BEGIN OF vlist OCCURS 0,
filler1(01) TYPE c,
field1(06) TYPE c,
filler(08) TYPE c,
field2(10) TYPE c,
filler3(01) TYPE c,
field3(10) TYPE c,
filler4(01) TYPE c,
field4(3) TYPE c,
filler5(02) TYPE c,
field5(15) TYPE c,
filler6(02) TYPE c,
field6(30) TYPE c,
filler7(43) TYPE c,
field7(10) TYPE c,
END OF vlist.
SUBMIT zreport EXPORTING LIST TO MEMORY.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
listobject = itab_list
EXCEPTIONS
not_found = 4
OTHERS = 8.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
list_index = -1
TABLES
listasci = vlist
listobject = itab_list
EXCEPTIONS
empty_list = 1
list_index_invalid = 2
OTHERS = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.
Submit report as job
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
host like msxxlist-host.
data: begin of starttime.
include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
exporting
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
importing
jobcount = jobcount
exceptions
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
if sy-subrc ne 0.
"error processing
endif.
Insert process into job
SUBMIT zreport and return
with p_param1 = 'value'
with p_param2 = 'value'
user sy-uname
via job jobname
number jobcount.
if sy-subrc > 0.
"error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
exporting
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
exceptions
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
others = 99.
if sy-subrc eq 0.
"error processing
endif. -
How to pass data from one internal session to another internal session
hi all sap experts ,
How to pass data from one internal session to another internal session and from oneExternal session to another external session.
Except : Import and Export parameters and SPA/GPA parameters.
Tell me the otherWay to pass data ..
Plz
Thanks in advancehi,
abap memory management u will understand about this concept.
the import /export parameter will help u that passing data between two internal sessions by using abap memory.
for syntax
Passing Data Between Programs
There are two ways of passing data to a called program:
Passing Data Using Internal Memory Areas
There are two cross-program memory areas to which ABAP programs have access (refer to the diagram in Memory Structures of an ABAP Program) that you can use to pass data between programs.
SAP Memory
SAP memory is a memory area to which all main sessions within a SAPgui have access. You can use SAP memory either to pass data from one program to another within a session, or to pass data from one session to another. Application programs that use SAP memory must do so using SPA/GPA parameters (also known as SET/GET parameters). These parameters can be set either for a particular user or for a particular program using the SET PARAMETER statement. Other ABAP programs can then retrieve the set parameters using the GET PARAMETER statement. The most frequent use of SPA/GPA parameters is to fill input fields on screens (see below).
ABAP Memory
ABAP memory is a memory area that all ABAP programs within the same internal session can access using the EXPORT and IMPORT statements. Data within this area remains intact during a whole sequence of program calls. To pass data to a program which you are calling, the data needs to be placed in ABAP memory before the call is made. The internal session of the called program then replaces that of the calling program. The program called can then read from the ABAP memory. If control is then returned to the program which made the initial call, the same process operates in reverse. For further information, refer to Data Clusters in ABAP Memory.
Filling Input Fields on an Initial Screen
Most programs that you call from other programs have their own initial screen that the user must fill with values. For an executable program, this is normally the selection screen. The SUBMIT statement has a series of additions that you can use to fill the input fields of the called program:
Filling the Selection Screen of a Called Program
You cannot fill the input fields of a screen using additions in the calling statement. Instead, you can use SPA/GPA parameters. For further information, refer to Filling an Initial Screen Using SPA/GPA Parameters.
Message was edited by:
sunil kumar
Message was edited by:
sunil kumar -
Delivery Report - Pending (Internal)
We're having an issue where users that are members of various distribution groups are not reliably receiving messages. We have a newsletter that is sent out weekly by one user. They use 4 internal distribution groups (some of them nested) plus external email
addresses that add up to around 1170 recipients. We have around 280 internal users. Of those 280, around 100 are delivered, and 170 are not delivered but show as "pending" in the delivery report. External users seem to be receiving messages fine.
I tried doing a trace on myself, as I didn't receive the newsletter that was sent out yesterday.
$Temp = Search-MessageTrackingReport -Identity lorraine.user -Recipients [email protected]
[PS] C:\Windows\system32>$Temp | %{Get-MessageTrackingReport -Identity $_.MessageTrackingReportID -BypassDelegateCheckin
g -ReportTemplate Summary }
The missing message was not in the list. It should have been the first result.
Here is an example of how one of the pending delivery reports look like:
Pending
3/4/2015 4:12 PM s8ex1.domain.ca
The message has been transferred from s8ex1.network.domain.ca to S8EX2.network.domain.ca
Group Expanded
3/4/2015 4:12 PM s8ex1.network.caedm.ca
The list of members of the group "Camps - DG" was expanded so that the message can be delivered to each recipient
Pending
3/4/2015 4:13 PM S8ex1.network.caedm.ca
The message has been transferred from s8ex1.network.domain.ca to s8EX2.network.domain.ca
3/12/2015 12:55 PM s8ex1.network.caedm.ca
No further information is available about this message because the logs are no longer available.
Environment:
Exchange 2013 CU7
2 Servers running Windows Server 2012 in a DAGHi,
According to your description, I understand that message cannot be delivery to all internal recipient when send one newsletter to 4 internal DG and external account, however external users receives fine.
If I misunderstand your concern, please do not hesitate to let me know.
Pending means either the destination for the e-mail message hasn't yet been found or the message could be pending approval.
I want to double confirm whether the 170 users could receive the message or only can’t receive this message.
Is there error message get back to sender after some time? Please try to send message to all 4 DG and try to reproduced this issue.
Then help to collect relevant event log and
protocol log for further analysis.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support -
Creation of new internal delivery channel using AQ
Hi,
I wanted to route one of Trading partner data to a different queue.(no want to use existing queues - IP_IN /IP_OUT queue).
This needs to create a new delivery channel using AQ in B2B.
I have gone thru the steps & entered all entries, but I am not able to find any queues created in B2B schema.
Do I need to create a queue using PL/SL in B2B to make it available as internal delivery channel or this setup itself will create a queue in B2B?
PFA the entirs:
for transport parameters
- transport server (B2B server IP)
- Protocol as AQ
-URI - b2b.<uri_name> (name of Queue, wanted to create)
- Hostname
- Port
-SID - b2b
-consumer - b2buser
- receiptient - null
-Polling interval - 6000
Transport server details:
Host name - (IP)
IP - Host IP
username -
Pswd - for B2B schema
Any pointers will be a great help.
Regards,
MSAs mentioned by TH in the above post, first thing is to create the data type that is used for messages - IP_MESSAGE_TYPE. This data type will already be present in the B2B database and could be reused.
For a new data type you could do the following.
==============================================================
Create a new data type using the following
==============================================================
create type IP_MSG_TYPE as OBJECT (
MSG_ID VARCHAR2(128),
INREPLYTO_MSG_ID VARCHAR2(128),
FROM_PARTY VARCHAR2(512),
TO_PARTY VARCHAR2(512),
ACTION_NAME VARCHAR2(512),
DOCTYPE_NAME VARCHAR2(512),
DOCTYPE_REVISION VARCHAR2(512),
MSG_TYPE INT,
PAYLOAD CLOB,
ATTACHMENT BLOB
Once you have created a new Data type ( or are reusing the existing data type), you need to create Queue Table that will hold the Outbound and Inbound message queues. The existing Queue table is "IP_QTAB" which can again be reused.
For new Queue table you could do the following
==============================================================
Create a new Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue_table ( queue_table => 'MY_QTAB',
queue_payload_type => 'IP_MSG_TYPE',
multiple_consumers => FALSE);
If you need to reuse the datatype change the queue_payload_type to 'IP_MESSAGE_TYPE'.
Once we have the Queue Table that will hold the queues, we need to add and start the queues that are to be used for the inbound and outbound messages.
==============================================================
Create the new Queues into the Queue Table using the following
==============================================================
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_OUT_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.create_queue (queue_name => 'B2B.MY_IN_QUEUE', queue_table => 'B2B.MY_QTAB');
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_OUT_QUEUE', dequeue => TRUE, enqueue => TRUE);
execute dbms_aqadm.start_queue(queue_name => 'B2B.MY_IN_QUEUE', dequeue => TRUE, enqueue => TRUE);
If you are reusing the queue table IP_QTAB for creation of new queues, then reference that for the queue_table in above commands.
You need to reference the queue_name eg. B2B.My_OUT_QUEUE in the B2B UI screen.
Hope this helps.
AKT -
Unable to set Internal delivery channel in B2B 11g
Hi
I am very new to B2B
I have some doubts that i want to clear
I am not sure whether the internal delivery channel will be automatically set in B2B 11g
I created an agreement for one of the external trading partner from host trading partner
When I try to deploy the agreement it is failing with the validation error
I don't know what is the error but I am believing that the internal delivery channel is not set for my host trading partner
I have two question's here
1. How to set Internal delivery channel in 11g B2B if it is not automatically set. If it is set what is it
2. Where can I find the log file on server. I want to get the details of the validation error occuring while I am deploying the agreement
Any help is greatly appreciated
Thanks
Vijay Sai.SHi
Now I want to define a custom IDC using HTTP.
How Can I do that
If go to channels tab for my TP and select HTTP as channel, I am not able to save it and the error is Unable to create an IDC with HTTP as method.
Can you tell me how can I create custom IDC
I don't want to use QUEUE channel for IDC.
Secondly do I have to give proper details of my TP?
I mean to say I that I want to just deploy an agreement for testing purpose by just giving some dummy details of my TP connection.
What if I don't have proper details of my TP connection
Thanks for the log file path
I found it.
I couldn't find any extra details in it though
Thanks
Vijay Sai.S -
How to pass the contents of an internal table to the IDoc FIDCC2?
Hi,
I have an internal table. Using its contents, I have to create an Idoc and do GL posting.
I have to use FIDCC2 Idoc and the function module IDOC_INPUT_FIDCC2.
Can u please let me know how to pass the contents of the internal table into the idoc FIDCC2 and do the GL posting?
Regards,
Balaji. RHi balaji,
use function IDOC_INBOUND_FROM_FILE. This will do half the process.
Documentation is missing, but program RSEINB00 explains something,
also some links
[http://help.sap.com/saphelp_nw70/helpdata/EN/dc/6b7f1543d711d1893e0000e8323c4f/frameset.htm]
[RSEINB00 does not work in background]
[RSEINB00 flat file to idoc uploading in XI]
[Loading flat idoc via report RSEINB00 into integration server fails]
Hope it helps.
Regards,
Clemens -
How do I retain Microsoft Word hyperlinks (internal to the Word document) in pdf export? I lose them in process. Using Word 2011 (14.4.3) and Mavericks. Have tried importing to Pages 5.2 and exporting, but that does not work either.
If you don't get an answer here, search/ask in the forums devoted entirely to MS stuff by its maker. These forums are for the Apple app Pages.
http://answers.microsoft.com/en-us/mac/forum/macword -
How to setup PCG Flow Rule Process flow with Business Event subscription
Hi,
How to setup PCG Flow Rule Process flow with Business Event subscription type?
When should Business Events be used?
The latest user guide does not provide ay information on this functionality of Flow rules.
ThanksYou should find it's usage noted in the new PCG user guide on page 3-26 under the heading "Configuring Workflow/Event Rules". This way you can have a Flow Rule call a business event component or a workflow. This would be kicked off within a process flow as one of the steps.
I hope that helps. -
Using Weblogic JMS for internal delivery channel
hi,
I want my B2B to talk to back-end application through Weblogic JMS queues. I have configured internal delivery channel for this. I am getting error message 'Max retry exceeded' in b2b_idc_transport.log
2008.09.24 at 12:09:53:713: B2BStarter thread: (DEBUG) initialize TransportReceiver: [WLIOutbound_TServer < jms > < Wholesale >]
2008.09.24 at 12:09:53:713: B2BStarter thread: (DEBUG) JMSReceiver.init() started ....
2008.09.24 at 12:09:53:713: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2008.09.24 at 12:10:03:704: B2BStarter thread: (DEBUG) Establishing JMS Connection.
2008.09.24 at 12:15:03:428: B2BStarter thread: (ERROR) Max retry exceeded, closing everything
java.lang.Exception: Max retry exceeded
at oracle.tip.transport.basic.jms.JMSMonitor.reconnect(JMSMonitor.java:833)
at oracle.tip.transport.basic.JMSReceiver.init(JMSReceiver.java:333)
at oracle.tip.transport.b2b.B2BTransport.init(B2BTransport.java:379)
at oracle.tip.adapter.b2b.transport.AppTransportInterface.initialize(AppTransportInterface.java:282)
at oracle.tip.adapter.b2b.engine.Engine.initialize(Engine.java:512)
at oracle.tip.adapter.b2b.init.B2BServer.initialize(B2BServer.java:280)
at oracle.tip.adapter.b2b.init.B2BStarter.startB2B(B2BStarter.java:297)
at oracle.tip.adapter.b2b.init.B2BStarter.run(B2BStarter.java:143)
at java.lang.Thread.run(Thread.java:534)
I have applied latest patch 7322333.
kindly let me know what is workaround for this? also, how can do debugging of this issue in B2B.
Thanks in advance.
Regards,
Vaibhav
Edited by: vaibs on Sep 26, 2008 12:15 AMhi Sinkar,
Thanks for reply. I have checked connectivity from b2b server to weblogic server, using java stub. Stub can connect to the Q successfully.
here is my b2b.log
2008.09.24 at 12:09:49:233: main: B2B - (DEBUG) B2B initialize
2008.09.24 at 12:09:49:233: Main thread: B2B - (DEBUG) This is Main thread executing..
2008.09.24 at 12:09:49:233: Main thread: B2B - (DEBUG) B2B start
2008.09.24 at 12:09:49:233: Main thread: B2B - (DEBUG) B2B start - context started
2008.09.24 at 12:09:49:233: B2BStarter thread: B2B - (DEBUG) B2BStarter - This is B2BStarter thread executing..
2008.09.24 at 12:09:49:233: B2BStarter thread: B2B - (DEBUG)
Maximum Heap Size = 530907136
Memory Allocated = 8323072
Free Memory = 842560
2008.09.24 at 12:09:50:544: B2BStarter thread: BusinessLogicLayer - (INFORMATION) ExecutionContextManager initialization is done
2008.09.24 at 12:09:50:544: B2BStarter thread: BusinessLogicLayer - (INFORMATION) User's maxCachedSessions is set to 0
2008.09.24 at 12:09:50:560: B2BStarter thread: B2B - (DEBUG) B2BStarter - Context Initialized
2008.09.24 at 12:09:51:762: B2BStarter thread: B2B - (DEBUG) B2BStarter - Start B2B
2008.09.24 at 12:09:51:762: B2BStarter thread: B2B - (DEBUG) B2BStarter - Starting B2B
2008.09.24 at 12:09:51:762: B2BStarter thread: B2B - (DEBUG) B2BStarter - configuration oained
2008.09.24 at 12:09:51:762: B2BStarter thread: B2B - (DEBUG) B2BStarter - clear global cache
2008.09.24 at 12:09:51:793: B2BStarter thread: B2B - (DEBUG) XEngine not running. So no need to clear cached objects inside XEngine.
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [0] HL7 over MLLP Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [1] EDI X12 over AS1
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [2] Custom Document over Generic Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [3] EDI EDIFACT over Generic Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [4] RosettaNet over RNIF
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [5] EDI X12 over Generic Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [6] Custom Document over MLLP Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [7] Custom Document over AS1
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [8] EDI EDIFACT over AS1
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [9] HL7 over Generic Exchange
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (NIFORMATION) Repository:print: [10] Custom Document over Internet
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [11] Custom Document over ebMS
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [12] EDI X12 over Internet
2008.09.24 at 12:09:51:824: B2BStarter thread: B2B - (INFORMATION) Repository:print: [13] EDI EDIFACT over Internet
2008.09.24 at 12:09:51:981: B2BStarter thread: B2B - (DEBUG) Repository:constructCertSQL SELECT cert.ID, cert.CLASSTYPE FROM TIP_Certificate_ra cert, TIP_Party_ra party, TIP_DocumentExchange_ra docex WHERE cert.ID = docex.signingcredential AND cert.tradingpartner = party.ID AND party.ishosted != 'Y'
2008.09.24 at 12:09:52:355: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:initialize Enter
2008.09.24 at 12:09:52:355: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:header name: ebXML SOAP Envelope
2008.09.24 at 12:09:52:355: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:header name: ebXML SOAP Message Header
2008.09.24 at 12:09:52:386: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.ebms.EBMSExchangePlugin:initialize Exit
2008.09.24 at 12:09:52:402: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Enter
2008.09.24 at 12:09:52:433: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.document.custom.CustomDocumentPlugin:initialize Exit
2008.09.24 at 12:09:52:511: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Enter
2008.09.24 at 12:09:52:511: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize resetListener = true
2008.09.24 at 12:09:52:511: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initdcx = true
2008.09.24 at 12:09:52:543: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize TPAProcessor
2008.09.24 at 12:09:52:558: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Clear TPA Cache
2008.09.24 at 12:09:52:558: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize DataContext. Pool Size 0
2008.09.24 at 12:09:52:574: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Treat Response as Request = false
2008.09.24 at 12:09:52:574: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:initialize Exit
2008.09.24 at 12:09:52:574: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize initialize Transport
2008.09.24 at 12:09:52:574: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Initialize Transport Logger.
2008.09.24 at 12:09:52:574: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:initialize Transport LogLevel = STATUS
2008.09.24 at 12:09:52:605: B2BStarter thread: B2B - (INFORMATION) Repository:getDeliveryEndPointList: Putting http://localhost
2008.09.24 at 12:09:52:605: B2BStarter thread: B2B - (INFORMATION) oracle.tip.adapter.b2b.transport.TransportInterface:initialize: Props: http://localhost port = 7777
PROTOCOL_ENDPOINT = null
2008.09.24 at 12:09:52:636: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [Wholesale_Transport_Server < http > < Wholesale >]
2008.09.24 at 12:09:53:682: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize Initialize AppTransport Logger.
2008.09.24 at 12:09:53:682: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize AppTransport LogLevel = WARNING
2008.09.24 at 12:09:53:698: B2BStarter thread: B2B - (INFORMATION) Repository:getInternalDeliveryEndPointList: Putting jms://[email protected]
2008.09.24 at 12:09:53:698: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize main Endpoint loop jms://[email protected]
2008.09.24 at 12:09:53:698: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize looping through transport Endpoint: jms://[email protected]
2008.09.24 at 12:09:53:698: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.AppTransportInterface:initialize add jms transport Endpoint: jms://[email protected] {Destination Provider Properties=java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://10.76.168.156:7010, jms.receiver.destination_password=weblogic, Connection Factory Location=weblogic.jws.jms.QueueConnectionFactory, jms.receiver.jndi_connection_factory_location=weblogic.jws.jms.QueueConnectionFactory, isTopic=false, Message Type=bytes, jms.receiver.is_topic=false, jms.receiver.factory_provider_properties=java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://10.76.168.156:7010, transport_callout_waittime=30, jms.receiver.jndi_destination_provider_properties=java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://10.76.168.156:7010, jms.receiver.polling_interval=10, polling_interval=10, Factory Provider Properties=java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory;java.naming.provider.url=t3://10.76.168.156:7010, jms.receiver.jndi_destination_location=[email protected], jms.receiver.destination_username=weblogic}
2008.09.24 at 12:09:53:713: B2BStarter thread: B2B - (DEBUG) initialize TransportReceiver: [WLIOutbound_TServer < jms > < Wholesale >]
2008.09.24 at 12:35:52:276: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Enter
2008.09.24 at 12:35:52:276: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:startListen Exit
2008.09.24 at 12:35:52:276: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run Thread start
2008.09.24 at 12:35:52:276: B2BStarter thread: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:initialize Exit
2008.09.24 at 12:35:52:276: B2BStarter thread: B2B - (DEBUG) B2BStarter - B2B initialized
2008.09.24 at 12:35:52:884: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize Enter
2008.09.24 at 12:35:53:087: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run initialize B2BListen turned off, will not listen on IP_OUT_QUEUE for messages
2008.09.24 at 12:35:53:087: Thread-10: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:run start listening on message
Thanks,
Vaibhav
Edited by: vaibs on Sep 28, 2008 3:20 AM
Maybe you are looking for
-
Error while saving some default value in excel file
Hi, I have been trying to accomplish a very simple task. I am trying to save values used in "PARAMETERS DESCRIBING PATH" of "Photo_Diode_N_Motors_DAQ" and want to reload the same values in "PD_Display_From_Spreadsheet". There is a function named "Di
-
Some fonts not showing up on Mac
I produced an e-book on typography for maps. It was produced on a PC and converted to pdf using the PowerPoint 2007 Save As PDF option. My customers who are on PCs have not had any trouble viewing all the fonts shown in the e-book exactly as they sho
-
How do you return more than one value from a method?
say I have this: public static int myFunc(String inString) // I want to return two values from this method }yeah so how would i do that?
-
Can Billing Quantity be Different from Order Quantity in Order Related Bill
Hi I have encountered a scenario here at my client. My client wants that the billing document should be created with reference to Sales Order but only that value of invoice should be relseased to accounting which is delivered. For example, Sales Orde
-
Profit Center Accounting active but no profit center specified
Dear All, I have created two accounting groups, but when i try to create the cost center it will pops up the warning, the cost center is failed to be created. Would you please help if there is anything i should set up to solve this warning like deact