How to setup IOS DHCP server for redundancy?
Hi
The customer has 2 core (cat6). Plan to enable DHCP service on them for IP phones.
How to setup them so there is a redundancy for DHCP service?
Thanks in advance!
Setup two routers and have them split the range of addresses that they lease out. The pools should be non overlapping.
Similar Messages
-
How to setup a Proxy Server for SSL
Hello,
We have a proxy server that uses the same port for http and https. How can I setup a proxy server in OSB (10gR3) for my business services to use with same port for both http and https?
Thanks,
Mike.Hi Mike,
The problem is OSB doesn't seem to let me set the same port for both http and https on a proxy.Can you please let us know the exact problem you are facing? I hope you would have referred below links as well -
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/eclipsehelp/ui_ref.html#wp1347580
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/consolehelp/global_resources.html#systemadminProxyAdding
You may set the proxy server at JVM level as well (workaround).
Regards,
Anuj -
Hi,
i have a test setup with a WLC-526, a few AIR-LAP521 and a 2621 with an ios 12.2.31 . I' not abel to associate the 521 to the WLC. I have configured an DHCP server on the Router with option 43 ascii "ap-managent-address" of the WLC. The DHCP server packet debug looks like :
DHCPD: DHCPDISCOVER from
DHCPD: Sending DHCPOFFER to
DHCPD: broadcasting BOOTREPLY to
DHCPD: DHCPDREQUEST received
DHCPD: Sending DHCPACK to
DHCPD: broadcasting BOOTREPLY to
and about 20 sec later :
DHCPD: DHCDPRELEASE message received
Has someone an idea how to configure a dhcp server for a 521 correctly. ?
Thankx
J?rgHi Carl
It's the real address. And if you are using secondary IP's it's still the primary real address.
Simon -
How to setup Adobe Media Server Professional x 2 run as cluster for load balance?
How to setup Adobe Media Server Professional x 2 run as cluster for load balance?
Hi,
Welcome to adobe forums,
Please refer to these help files in order to setup AMS as a cluster : https://helpx.adobe.com/adobe-media-server/config-admin/load-balancing.html
https://helpx.adobe.com/adobe-media-server/tech-overview/scaling-server.html
Let me know if you need any help.
Regards,
Puspendra -
Can I use DHCP snooping and IOS DHCP server on the same switch stack
Hello,
I am shortly going to be deploying a Cisco CallManager solution for a customer whose network comprises stacks of Catalyst 3850 switches.
There is no separate core/server farm switch so the CallManager servers, voice gateways and IP phones will all plug into the same stack and be in the same VLAN (not my choice!).
For security we want to enable DHCP snooping and were planning on using the IOS DHCP server on the Catalyst switch stack.
Will this work? - when I enable DHCP snooping in networks with separate access layer switches I set the uplinks to the core as trusted links.
I am not sure whether DHCP snooping will work in this case. Do I need to set the VLAN interface on the switch as trusted, is this even possible?
Unfortunately I do not have access to a layer 3 switch to test this at the moment.
ThanksNope. That's the issue.
They'll sync on a third device acting as a hotspot, but the device sending a signal is not "on" the network it creates so the airport is all by itself on that network. At least that is what it looks like to me. Anyone have another take on it? Seems pretty silly that an iPad can put out a wifi signal, an Airport Express can receive a wifi signal, and yet there is no simple way to get them to communicate under this particular condition. -
How to setup the SMTP server in Oracle apps?
Hi,
How to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
Thanks,
Bijoy
Edited by: user12070886 on Feb 6, 2013 4:26 AM
Edited by: user12070886 on Feb 6, 2013 4:27 AMHow to setup the SMTP server in Oracle Apps? Is it mandatory to keep the SMTP server on the same host where the Oracle data base is installed? No, it is not mandatory. Also please note that the mails are sent out from concurrent manager mode. Not from the database node.
Also can someone help how we can set up the SMTP server on different host (not the Database server) and we can use the same for Workflow notification mailer.
>
It depends on the operating system you are using. If you are using *nix then sendmail needs to be configured.
Thanks -
How to setup gmail push notification for my iphone 5?
I'm using gmail. Prompt respond for mails is very urgent for me.
How to setup gmail push notification for my iphone 5?I switched from a BB to an iPhone a few days ago and I knew I was going to miss the QWERTY keyboard but then I also discovered that my GMail doesn't 'push' to my iPhone. I was used to 'push' for all mail accounts on the BB. I also missed being able to personalize text, email, and phone tones for individuals.
I tried the Gmail app for iOS and it does deliver Gmail to the iPhone app quickly but the text is tiny and when it is a web page it's almost impossible to read.
So, I have worked out a kludge to get around these problems.
I added my exisiting Gmail account to the iPhone.
Hotmail does push to iOS 7 so I created a Outlook account (could be hotmail or Live) using the web browser.
I added the hotmail account to the iPhone. I basically use this to give fast notification of important emails on my iPhone.
On my macbook email client I created a rule that 'redirects' incoming mail to the hotmail account. The 'Redirect' is important since the email will show up in the hotmail account on the iPhone as coming from the original sender and you can then respond to the original sender from the iPhone, though the sender will see it as coming from the hotmail account.
The other downside is that you will get a second copy of the email in the gmail inbox on the iPhone, probably 15 minutes later.
If you don't want all of the mail being redirected you can create a 'redirect' group in the Address book and then adjust the rule in Apple mail to only redirect the mail to the hotmail account if the sender is in the redirect group. You can add and delete contacts from this group depending upon which ones you consider to be important. You will still get two copies of the email on the iPhone, one in the hotmail inbox and one in the gmail inbox.
You can prevent this from happening temporarily by turning off, but not deleting, the gmail account on the iPhone. You could then edit the emails on the Apple email client before turning the gmail back on in the iPhone.
And finally if you use the VIP feature in email on the iPhone you can create a list of VIP contacts and then assign a different notification sound for the VIP's. So in effect important contacts mail will be redirect to the iPhone for quick notification and very, very important contacts will have a different notification sound.
I'm basically using the Hotmail account as a notification tool and basically delete all the emails in it since the original copy will be in the gmail account.
And best of all it's all free, except for the bandwidth. -
How can setup the outgoing email for ipad2?
How can setup the outgoing email for ipad2?
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
iPad Mail
http://www.apple.com/support/ipad/mail/
Cheers, Tom -
How to setup a company code for material management
Hi,
While creating material in MM01, in sales org tab, when I gave plant XXXX, it is giving an error "Company code YYYY is not setup for material management".
So can you help me , how to setup a company code for material management
Help is appreciated
thanks
DILHello Sendil,
You can maintain it with trns code OMSY or MMPI/MMPV.
Hope this helps
Regards
Arif Mansuri -
How to setup a global artwork for a TV Show
Hi, I've a TV Show composed by 45 episodes where each one have his artwork but I don't know how to setup a global artwork for the TITLE of the TV Show while retaining the 45s artworks.
ie. when watching the Tv Shows (library on iTunes) I would like to see the global artwork of the Tv Show that is different of the other 45s episodes contained.
Bye, Roberto.Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you. -
How to setup a release strategy for store generated purchase order
Hi there,
Does anybody know how to setup a release strategy for store/plant generated purchase order? I have a request from our client, but I never cross this before. Please help and let me know the step with every single detail.
Greatly thank for your help.
Kind Regards,
2teaPlease go thru the below Release Procedure and check whether you have maintained all the settings properly.
PO RELEASE STRATEGY
The release code is a two-character ID allowing a person to release (clear, or approve) a requisition or an external purchasing document. The release codes is basically controlled via a system of authorizations (authorization object M_EINK_FRG).
Use SE12, structure CEKKO to check all the fields available for controlling the Purchase Order.
e.g. If the total value for the Purchase Order exceeds 10,000, release strategy 01 is assigned to the Purchase Order. There is only one characteristic created in this example. For controlling the Purchase Order type, create characteristic for CEKKO-BSTYP and the value NB.
CT04 - Create Characteristic e.g. NETVALUE
Click Additional data Table name CEKKO Field name GNETW and press enter
(for currency dependent field, you are prompt to enter the currency which the system then converts the currency of the Purchasing document into this currency)
In the Basic data (X refers to tick),
X Mutliple values
X Interval values
In the Value data, in the Char. value column, type >10000 and press enter
Save your data
CL02 - Class
Class - Create REL_PUR
Class type - 032
Click Create
Description - Release Procedure for Purchase Order
In the Same Classification section, click Check with error
In the Char. (characteristic) tab, type NETVALUE to assign your characteristics to the class
OMGS - Define Release Procedure for Purchase Order Type
Release Group - New entries
Rel.group Rel. Object Class Description
02 REL_PUR Rel. Strategy for PO
Release codes - New entries
Grp Code
02 01
Release indicators
Release indicators Release Description
0 Blocked
1 X Release
Release Strategy
Release group 02
Rel.strategy 01
Release codes 01
Release status 01
Classification Choose your check values
OMGSCK - Check Release Strategies
(make sure there are no error messages)
Once the Purchase Order is not release, buyers will not be able to print the Purchase Order.
Goods Receipts will be shown with Message no. ME 390 - Purchasing document XXXXXXX not yet released.
In 4.6c, Purchase Order with Release Strategy have a tabs at the end of the Header. This allowed the buyers to check the release status of the Purchase Order.
The person with the release authorization have to use ME28 to release the Purchase Order.
Regards,
Ashok -
How to setup a default direction for new divs in fluid grid layout in dreamweaver?
Hi,
how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
Thanks.This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product. -
How to setup a default size for new divs in fluid grid layout in dreamweaver?
Hi,
how to setup a default size for a new divs in fluid grid layout in dreamweaver? I don't need the default size for new divs as a 100% width, I need them 13.69% as a one coulmn width only (7 coulmns fluid grids layout for desktop size 1000w).
This problem I've faced when I intended to insert dozens of fluid grid divs in the layout.Sorry, I don't believe that you have had a good look at the Foundation framework. I'll now hold your hand while we go through the basics.
Here is the specific page http://foundation.zurb.com/docs/components/grid.html
The default values are
Em-base : 16px
Row width: 62.5em (62.5em x 16px = 1000px)
Columns per row: 12
These and other default values can be changed. The fact of the matter is that if you stipulate a section width of 2 or 3 or 12 columns, the widths will automatically be calculated for you.
In your case, if you want 7 columns, all you need to do is change the number of columns per row and the rest is done for you. -
How to setup the Airport Extreme for PSP?
Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
PowerBook G4 Mac OS X (10.4.3)Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP. -
How to setup the airport extreme for window xp
How to setup the airport extreme for window xp
Sorry, I forgot to mention a few points:
1) I don't have the Airport Extreme base station;
2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.
Maybe you are looking for
-
I have to unplug my time capsule and reboot it. Is there a diagnostic routine I can run or any error detection I can look for?
-
Autologin to an account when using multiple users
Is there a way to have a mac running Mac OS 9 set up with multiple users autologin to one of the accounts? Ok, since I know people will ask why do you want to do that. I have an old mac and found my old XTension home automation software. I want to ma
-
Skype number not working / long forwarding times
Dear Team, my skype number is not working although I allowed everyone to call in my privacy settings. This has been happening quite often and now it is already down all day. I put it on forwarding to my mobile number for now, but although i set the
-
Get an error whe launching Operations Manager Console
Hi Guys, Not sure what broke here but this morning I had no issues launching my SCOM powershell console. While I was working on a script it look to have broke. I opened up a new console and I got this: I have checked the a number of blog posts about
-
I have a radio program that spits out a html file onto my HD of the current song playing. I need a way to auto upload that html file to a web server via FTP. I thought applescript but no dice. The best script I can write doesn't even give me an er