How to setup iPad with HP3056A

I just purchased new iPad and want to set up HP 3056A printer. According to HP this printer has AirPrint capabilities. I do not have a working computer. I have wireless Internet in my home. Can someone please give me some direction of where to start. Also not sure what operating system it is using. It is the latest edition iPad with cellular 16 storage. This is my first iPad.

Thank you but the link has a list of HP AirPrint printers and it does not included mine, I knew that already. But the HP specs page says it is good for AirPrint??? My main question is how to install this or any printer for my iPad without a computer. I may return this printer model and purchase one on the list but if I can't install any printer without using a computer I need to know so I don't waste my time buying another printer. I may just return the iPad and buy a windows laptop.

Similar Messages

How to setup airprint with my canon printer

How to setup airprint with my canon printer asnd ipad 3

Is your printer on the list of Airprint enabled printers? If it is, you set it up through your home computer and your iPad should recognize it. If it is not, you can not make a non-Airprint printer Airprint enabled.

How come my iPad with iCloud doesn't sync with my iPhone 4 that has same apple id and both ios5?

How come my iPad with iCloud doesn't sync with my iPhone 4 that has same apple id and both ios5?

Not sure if you just have an issue with your setup or something else.
I had an issue where my numbers and pages documents were not syncing on my ipad, but were on my iphone.
I turned icloud off an on, reset the apps, even deleted them and reinstalled them. I also checked all of the other icloud setting.
Only thing that worked (and it might be just a fluke) I emailed from my iphone a numbers document to my ipad. I opened then closed the document and the app. When I opened it back up it started importing my icloud documents.
If it is a settings issue then you need to be sure you have icloud setup in your mail settings. Has to be there and active.

HT1689 How to cinhronize IPad with iPhone?

How to cinhronize IPad with iPhone?

tkozyr wrote:
How to cinhronize IPad with iPhone?
Not sure what you are asking...
The Sync process is via iTunes...
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
Perhaps you are meaning iCloud...
See how iCloud works here > http://www.apple.com/icloud/
More Info Here > http://www.apple.com/support/icloud/
Apple - iCloud - Learn how to set up iCloud on all your devices.

How to unlock ipad with voice over?I even entered my correct password byt the voice over kept on saying it's wrong? 0409 is my password how come its wrong.. and the voice over kept on saying zero has no value?

how to unlock ipad with voice over and password? i already entered my correct password the voice over kept on saying its wrong..my password is 0409.. and the voive over says"zero" has no value?

Turn off VoiceOver
1. Press the Home button
2. Tap Settings.
3. Then double-tap Settings.
4. Tap General.
5. Then double-tap General.
6. Use three fingers on the screen to scroll to Accessibility
7. Tap Accessibility.
8. Then double-tap Accessibility
9. Tap VoiceOver
10. Then double-tap VoiceOver.
11. Tap "On" next to VoiceOver
12. Then double-tap "On" to turn it off.

How to synchronize iPad with Apple TV

Just got the Apple TV, can you synchronize the iPad with the Apple TV in order to stream the music and movies from the iPad to the TV? Thanks for your help.

Hi Audiotinker,
Welcome to the Support Communities!
The links below will show you how to setup your Apple TV using your iPad (with the iOS 7 software),
Apple TV (3rd generation): Using an iOS device to set up your Apple TV
http://support.apple.com/kb/HT5900
And how to use Airplay to share the information on your iPad with the Apple TV:
Apple TV - AirPlay - Play content from iOS devices on Apple TV.
iOS: Using AirPlay
http://support.apple.com/kb/HT4437
iOS: How to use AirPlay Mirroring
http://support.apple.com/kb/ht5209
Cheers,
- Judy

How to setup CCMS with Solution Manager

Hi, All
My question is how to setup or satallite connection with Solution manager 4.0 for CCMS alerts
Is that RFC connection using both sites, trusted and satellite system ?
I would like to setup CCMS alerts through Solution manager and R/3 ccms
please anyone has some guide or URL or any idea send me
We are using SAP NW 2004 620 4.6C (SLD=DV,QA,PR) and solution manager 4.0
Thanks in advanced
J
Edited by: issue2008 on Sep 19, 2008 12:13 PM

you need to install CCMS agents(sapccm4x, sapccmsr) on satellite systems & configure them with the central system(solman).

How to setup grub2 with arch linux and xen, lvm on luks

OK, so I tried downloading this package from AUR: https://aur.archlinux.org/packages/xen-git/ , but that has patching problems as noted in the comments. It looks like the packagebuild sets up all the xen stuff for you, but I can't seem to get the package to install because of the error's while patching. If anyone can point me in the right direction on what all the extra files in the PKGBUILD are for or how to debug problems with PKGBUILDs not working because of patches.
So next I just tried to compile the latest xen from git://xenbits.xen.org/xen.git (with ./configure, make, make install) and that seemed to go fine, but I'm a bit confused:
1. Do I have to do any additional configuration for xen when working with arch linux? On ubuntu I could just compile the source, update grub, and make sure to start the x services at runtime.
2. How do I set up grub to load xen with this setup? Right now this is my /boot/grub/grub.cfg:
GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda3:vgStorage"
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true
# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console
# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console
# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto
# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep
# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true
# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true
# Uncomment and set to the desired menu colors. Used by normal and wallpaper
# modes only. Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"
# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"
#GRUB_SAVEDEFAULT="true"
~
I've tried throwing in a line like: XEN_HYPERVISOR_CMDLINE="cryptdevice=/dev/sda3:vgStorage", but nothing new shows up on the grub boot menu.
First time trying to set up a non-ubuntu system, please help!

As for XEN.... well you could always try QEMU/KVM or LXC.
As for the LVM2-on-LUKS/dm-crypt
My /etc/mkinitcpio.conf looks like this...
MODULES="aesni_intel ata_generic ata_piix nls_cp437 ext4 intel_agp i915 dm-snapshot"
BINARIES=""
FILES=""
HOOKS="base udev autodetect block keymap encrypt lvm2 filesystems keyboard fsck shutdown"
/etc/defaults/grub
GRUB_CMDLINE_LINUX="cryptdevice=/dev/sda2:root:allow-discards"
GRUB_PRELOAD_MODULES="part_gpt part_msdos"
GRUB_TERMINAL_INPUT=console
GRUB_GFXMODE=auto
GRUB_GFXPAYLOAD_LINUX=keep
GRUB_DISABLE_RECOVERY=true
The running grub config looks like this
/boot/grub/grub.cfg
9 insmod part_gpt
10 insmod part_msdos
53 if loadfont unicode ; then
54 set gfxmode=auto
55 load_video
56 insmod gfxterm
57 set locale_dir=$prefix/locale
58 set lang=en_US
59 insmod gettext
60 fi
61 terminal_input console
62 terminal_output gfxterm
63 set timeout=3
84 menuentry 'Backup, Arch Linux grsec kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-grsec kernel-true-12341234-8080-8080-8080-332200882255' {
85 load_video
86 set gfxpayload=keep
87 insmod gzio
88 insmod part_msdos
89 insmod ext2
90 set root='hd1,msdos2'
91 if [ x$feature_platform_search_hint = xy ]; then
92 search --no-floppy --fs-uuid --set=root --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 BBAAEEAA-FFCC-CCFF-FFCC-AABBCCEEBBAA
93 else
94 search --no-floppy --fs-uuid --set=root BBAAEEAA-FFCC-CCFF-FFCC-AABBCCEEBBAA
95 fi
96 echo 'Loading Linux grsec kernel ...'
97 linux /vmlinuz-linux-grsec root=/dev/mapper/VolGroup00-lvroot rw cryptdevice=/dev/sda2:root:allow-discards quiet
98 echo 'Loading initial ramdisk ...'
99 initrd /initramfs-linux-grsec.img
100 }
Things to note:
Numerical UUID is the UUID of the ROOT partition.
Alphabetical UUIS is the BOOT partition
hd1,msdos2 AND ahci1,msdos2 are how the Grub Bootloader numbers the drives not Linux.
I have my BOOT partition on a USB stick, and it is the Second partition.
So, that would make it, Device 2 and Partition 2
Device numbering starts at 0
Partition numbering starts at 1
Oh, and note that you don't need ":allow-discards" ... at all but certainly if you don't have an SSD. Also note that I included the line numbers so it is very clear that I didn't post the whole thing, but instead what I thought was relevant. Finally, I am loading modules that I don't even need, but what the hell... if it ain't broke, don't fix it
Last edited by hunterthomson (2013-12-04 08:31:45)

How to setup reply with message

how to setup the "reply with message" feature on the iphone5

This feature is automatically enabled on the iPhone 5. When you get a call you will see the "swipe up" icon next to the "slide to answer", when you sail up you will have the option to reply with text message.
There are only three messages to choose from but you can change them at Settings > Phone > Reply with message > you can then overwrite the existing text options.

How to setup ftp with dreamweaver and windows server 2003

Does anyone know if there is a tutorial/article on settinp up Dreamweaver cs3 to use Windows server 2003 as an FTP server...
any assistance would be greatly appreciated...

I was able to figure out how to setup the ftp connection, connect to my home server, however,whenever i tried to upload the contents of my website to my server, nothing gets uploaded to the site. I tried putting one page at a time, nothing. tried everything, and still no joy. I can see everything on my local server which is a XAMP package, but nothing on my remote server. Do i maybe need to maybe have a WAMP or XAMP on the Windows Server 2003 or that should not matter. This is new to me so i am learning as i go along.
Another thing, i was able to create a subfolder in my c:\www.ftproot folder, i can see that folder on my local machine, i'm just not seeing the files in that folder when i do my 'put' with my files.

How to setup Blazeds with Flex builder 3

I need to setup Blazeds with Flex builder 3. Can anyone help me out regarding this?

Very helpful! Should be placed in the blazeDS docs!
Chris

How to Setup yum with OEL

Hi,
Can I setup yum with the official Oracle Enterprise Linux repositories? If yes, what repo lines do i have to add to my yum.conf file?
Regards
Joao

see: http://www.oracle.com/technology/tech/linux/htdocs/yum-repository-setup.html

How to setup Clustering with Weblogic?

Dear All,
I am a beginner of using Weblogic. Now i need to setup Clustering in
company. I have 3 NT Server and install Weblogic 5.1.0 on each machine, the
name is Cluster1, Cluster2 and Cluster3. At the First Step, can someone tell
me how to setup the clustering and how to test it to esure that is work???
Thanks so much!
hk-beginner

more specifically,
http://www.weblogic.com/docs51/cluster/index.html
Ketan
"Billy Bunter" <[email protected]> wrote in message
news:[email protected]..
Look at the BEA docs.
beginner wrote:
Dear All,
I am a beginner of using Weblogic. Now i need to setup Clustering
in
company. I have 3 NT Server and install Weblogic 5.1.0 on each machine,the
name is Cluster1, Cluster2 and Cluster3. At the First Step, can someonetell
me how to setup the clustering and how to test it to esure that iswork???
Thanks so much!
hk-beginner

How to setup iPad air with apple id?

Our setup - Mac Pro 2009 model at home. My wife and I each with our own iphone. We both share the same Apple ID in order to use the same purchased music, apps, etc.
She just got an Ipad air yesterday and we're trying to setup imessage on the ipad. If she enters in my email address associated with our shared apple ID - message sent by her appear from me. So we added her email address as an additional email - now messages from her come under her name and also under the phone number associated with the apple id.
what is the solution to have imessages from her Ipad come from her?

is it aol id for apple as make sure you've selected that. other wise contact apple as get them to sort it,

How to setup TC with ethernet to existing router.

Hi,
What I am trying to do is use TC strictly as a backup device for time machine.
I am trying to do the follwoing setup.
I want to connect tc to my wireless router using ethernet cable(so my time machine backups do not take days). After doing this, Airport utility will only recognize the TC if my mac has WIFI enabled. How do I force it such the TC is only using the ethernet and not WIFI.
Thanks and I look forward to your reply.
...Bruce

Hi, I'm actually researching to see if a TC will be a good choice for my configuration, I have the following hardware:
Alcatel 3Ve.A2010TEL VDSL Modem
Linksys EA4500 router
iMac (1TB HD)
MacBook Pro (500GB HD)
Mini Server (500GB HD)
MacBook (250GB HD)
MacBook Air (128GB Flash)
2 PCs with Windows 7 (250GB HD)
1 Wireless Laser Printer
2 iPad
4 iPhone 5
The iMac, and Mini have external backup disc for Time Machine, but there is not enough capacity for their backups. So I want to know if a 3TB Time Capsul will be a solution for my setup, and if replacing my Linksys EA4500 router is needed or if runing the TC in Bridge mode will do.
Please any suggestion will be helpful before I invest purchasing the TC.
Thanks a lot,
Reinaldo Varela

How to setup iPad with HP3056A

Similar Messages

Maybe you are looking for