How to Setup JMS in Siebel Server

Hi
Currently we have a Requirement to work with queuing System from JMS Queuing
How to Setup the JMS Queuing from Siebel Point of view?
Does JMS Should be Installed in Siebel Server?
Plz Provide Inputs for How to Set up the JMS Queuing Mechanism and Setting up the Queues for Posting and Receiving the Messages from JMS Queues
Thanks & Regards
Rajendra Prasad

Update - it works ! At least I can connect to Mountain Lion (not server) from my iPhone using the VPN Server Configurator app.
Here's what I did :
1) download the app and install
2) setup using the help files on the web page : http://www.greenworldsoft.com/product-vpn-server-help.html
3) at the last stage you need to setup port forwardin on your router
4) under Airport Utility 6.0 you cannot setup ports 500 or 4500 due to BTTM conflicts but setup the other 2 ports (1723 TCP and 1701 UDP), update airport extreme
5) download Airport Utility 5.6 from here : download already extracted utility it is in it's extracted form as is necessary under Mtn Lion (thanks to NetUse Monitor for the download - great app by the way)
6) run 5.6 and setup port forwarding (Advanced-Port Mapping) for the other 2 ports (500 and 4500 UDP), update airport extreme
7) that's it, I was able to connect to the VPN from my iPhone !

Similar Messages

How to setup a Firefox update server on a Windows 2012 server?

Are there any instructions available on how to setup a Firefox update server that can automatically download updates from the Mozilla site and users can then grab the updates from the internal server? I'm using wampserver so that I can utilize Apache and PHP on the 2012 server.
Thanks!

See this MDN page: https://developer.mozilla.org/en-US/docs/Mozilla/Setting_up_an_update_server
Note: Last updated by: Kohei, Sep 15, 2009 4:08:00 PM

How To Setup A Local Exchange Server Integrated With Office365 For A Single Mailbox

Hello,
We recently migrated to Office365 but had an issue since we need more than 16 simultaneous connections to a single mailbox. Because of this, we need to deploy a local Exchange Server that will be used to host a single mailbox that requires up to 500 simultaneous
connections for a Contact Center application. I'm looking for information on how to setup the local Exchange Server to basically create a local instance of a mailbox hosted on Office 365. So we can have our application open the numerous simultaneous connections
to our local server which will then connection to Office 365 to send/receive email through the mailbox hosted on Office365.
Please let me know if you have any information or resources you can direct me toward.
Thanks,
Chris

Hi,
To deploy local Exchange server integrated with Office 365, we can depend on Exchange Server Deployment Assistant:
http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-AAAAAAAAQAAAAAEAAAAAAAA%7e
Please note that there may be 9646 error if there are many simultaneous connections at the same time.
Thanks,
Angela Shi
TechNet Community Support

How to setup the MDT Upstream server and down stream server

Hi,
i have configured the MDT upstream server at office1 & i need to setup the downstream server at office2.
Image should be replicate from upstream server to downstream server and image should be build from
downstream server at office2 not upstream server. I need to use LAN network, not MAN network.
How i can setup the downstream MDT server?
Can you please suggest on this.
Thanks!

Hi Meganathen,
I would go for a periodically (scheduled) robocopy. Yes it's perfectly possible to create this with selection profiles and linked deploymentshares, but based on my own experiences and consulting other subject matter experts like MVP Johan Arwidmark, it is
advised to take care of replication yourself by robocopy or by DFSR
This way you are in control, and robocopy is a great tool to take care of replication of files.
To keep in mind your central deploymentshare and branche deploymentshare, you can play with the bootstrap.ini and customsettings.ini, that they will refer to a different deploymentshare location based on default gateway.
See these links for more information:
http://social.technet.microsoft.com/Forums/en-US/1c4bf193-6293-4207-9995-005dd1756fdd/mdt-2010-for-multiple-sites?forum=mdt
http://tech.sportstoday.us/windows_7/fine-tuning-mdt-deployments---creating-a-linked-deployment-share-(part-2)---maintaining-linked-deployment-shares.aspx
Good luck!
If this post is helpful please click "Mark for answer", thanks! Kind regards

How to setup the local testing server ??

hello, what do I need to install first before I can setup the
testing server in dreamweaver 8? I have download apache2 triad,
mySQL, IIS 6...
Where should I download the correct version of mySQL because
I need to test my php scripts locally which has something to do
with database?
How do I configure these on the testing server setup
Connection Name - what should I input here?
MySQL Server - and this?
Username - where do I get one?
Password - where do I get one?
Database - gets an error saying "HTTP error code 404...
1) There is no testing server running on the server machine.
2)The testing server specified for this site does not map to
the
http://localhost/...... ??
Please Help.. Thanks in advance!

criticalx wrote:
> I'm using the apache2triad for the mySQL.. I s there
anything I did wrong on
> my configuration part? Thanks... "I only need to test my
site locally"
I have never heard of apache2triad, but I've just had a look
at the
apache2triad site, which says: "It is recommended that only
experienced
users, with a vast knowledge of how networks, and its
components (Apache
Web Server, ect.) should install this software. It IS NOT
your average
software; a lot of time, patience and effort are required to
maintain
such a server."
Setting up a local testing server is not difficult, but it
does require
a basic understanding of how a server-side language like PHP
works.
As I said before, you must always store your files in the web
server
document root. According to the apache2triad documentation,
this is C:
\apache2triad\htdocs\. Unless you store your files there, or
in a
subfolder of htdocs, nothing will work.
---LOCAL INFO----
Site Name: login
Local Root folder: C:\apache2triad\htdocs\login
checked refresh local site automatically
default images: C:\apache2triad\htdocs\login\images\
Links Relative to: "document" - this is correct
HTTP address: leave blank
cache: enabled
---REMOTE INFO---
None
---TESTING SERVER---
Server Model: PHP/MySQL
Access: Local/Network
Testing server folder: C:\apache2triad\htdocs\login\
URL Prefix:
http://localhost/login/
mySQL connection:
conn name: connLogin
mySQL server: localhost (do not use
http://)
username: root
password: mypassword
Database: login
David Powers
Author, "Foundation PHP for Dreamweaver 8" (friends of ED)
Author, "Foundation PHP 5 for Flash" (friends of ED)
http://foundationphp.com/

How to setup reports in Apps Server 10.1.2.0.0

I know 10.1.2.0.0 does not have oracle reports. I know that 10.1.2.0.2 does have oracle reports. From the docs I have I cannot upgrade 10.1.2.0.0 to 10.1.2.0.2. Is there anyway I can load a new Apps server 10.1.2.0.2 and get it to use the 10.1.2.0.0 meta data and identity infrastructure of 10.1.2.0.0? If this works how would I setup a reports portlet in a 10.1.2.0.0 portal? Anyone have any ideals?

hi Kashif,
just check this thread,
How to deploy Forms/report on Application Server 10.1.3
Regards,
Hamdy

How to setup built-in VPN server on Mountain Lion

Anyone have information on configuring the built-in VPN server in OS X Mountain Lion ?

Update - it works ! At least I can connect to Mountain Lion (not server) from my iPhone using the VPN Server Configurator app.
Here's what I did :
1) download the app and install
2) setup using the help files on the web page : http://www.greenworldsoft.com/product-vpn-server-help.html
3) at the last stage you need to setup port forwardin on your router
4) under Airport Utility 6.0 you cannot setup ports 500 or 4500 due to BTTM conflicts but setup the other 2 ports (1723 TCP and 1701 UDP), update airport extreme
5) download Airport Utility 5.6 from here : download already extracted utility it is in it's extracted form as is necessary under Mtn Lion (thanks to NetUse Monitor for the download - great app by the way)
6) run 5.6 and setup port forwarding (Advanced-Port Mapping) for the other 2 ports (500 and 4500 UDP), update airport extreme
7) that's it, I was able to connect to the VPN from my iPhone !

How to setup Web Proxy within Server Admin utility?

Hi. We currenlty use the Web function within the Server Admin utility for all our web hosting applications running on Snow Leopard server. Recently we had a vendor create a website application which needs a proxy setup in order work. According to them, we need a proxy to 127.0.0.1:8000 for the site. At the moment, they manually edited the .config file for the website to edit the proxy settings which consequently caused the Web function within Server Admin to stop functioning properly as I found a website stating that if a config file is manually edited outside of the Server Admin, the Web function will not function properly. The error message I got was "Uncaught exception raised in Web client-side plugin".
The .config file which was manually edited is as such:
<VirtualHost **.**.**.***:**>
    ServerAdmin [email protected]
    ServerName demo.segmentthis.com
    ServerAlias demo.segmentthis.com
    ProxyRequests off
    <Proxy *>
Order deny,allow
Allow from all
    </Proxy>
    <Location />
ProxyPass http://localhost:8000/
ProxyPassReverse http://localhost:8000/
    </Location>
</VirtualHost>
I supposed my question is, is there a way to edit the proxy within the Web function of Server Admin instead of manually editing the config file?
I hope that made some sense but if not, please let me know and I will try to elaborate a bit more.
Thank you very much for your help!

Your question here appears related to or a continuation of this previous question — is this the case?
Based on the previous posting, whatever information you're receiving from the vendor support folks appears rather garbled or confused, particularly based on that "The vendor mentioned that we need to route the DNS and get it working (forwarded) on port 80 and I'd tend to avoid them." comment over there.
I'd ask the vendor for documentation and details (as on its face, a requirement for this proxy seems, well, somewhat questionable), but yes, you're probably in the Apache config files here, and probably using overrides and .htaccess if the site is low-volume, as that'll keep the changes isolated for testing.
Out of curiousity, is this proxy project part of an attempt to get this package to accessible, but without the vendor actually having the package running on port 80? (Got a pointer to the package? We can check the docs, and see if we can translate the installation requirements into something useful on OS X Server.)
Are you running 10.5 or 10.6? Both are pretty old releases.

How to setup Exchange 2007 production server replica in a lab environment.

Hi,
We have an single exchange standalone server in production environment. I want to setup the replica for that with users and exchange databases. Please suggest the best way to perform this task.
Sudheer MCP,MCSA(Server 2012)

Hi Sudheer,
Thank you for your question.
For user database replication, we could install BDC to meet your requirement, we could refer to the following link:
https://technet.microsoft.com/en-us/library/cc738032(v=ws.10).aspx
For Exchange database replication, this is a single Exchange server, it is referred to local continuous replication(LCR), if I misunderstand, please be free to let me know. We could refer to the following link:
https://technet.microsoft.com/en-us/library/bb125195(v=exchg.80).aspx
However, we didn’t deploy LCR in production, we could install another server to perform another high availability(ccr,scc,scr), we could refer to the following link:
https://technet.microsoft.com/en-us/library/bb124721(v=exchg.80).aspx
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

How to setup in-process report server 11g on linux for destype=printer

Currently, I'm facing following error when send RDF report directly on printer with destype=printer using run_report_object built-in
REP-50159: The report generated successfully but distribution to destinations failed.
REP-50157: Destination ID TESTREP failed with error An error occurred while sending the file to printer \\hostname\printername. Exit with error code 1..
When i check on report server cache PDF file is generated /wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf but job not go to printer as mention in trace rwlpr.trc file output below.
Note: rwlpr.trc file generated by following 268295.1
==============================================================
XAUTHORITY=/tmp/.gdmT93JDW
_=/usr/bin/env
Parameters : -P "\\askit\PRN01F8" -#1 "/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf"
+ '[' '!' 4 -gt 0 ']'
+ '[' -P = -help ']'
++ uname -s
+ '[' Linux = HP-UX ']'
+ PRNCMDS='lpr lp'
+ for CMD in '$PRNCMDS'
++ which lpr
++ grep lpr
+ PRNCMDPATH=/usr/bin/lpr
+ '[' '!' -x /usr/bin/lpr ']'
+ '[' -x /usr/bin/lpr ']'
++ basename /usr/bin/lpr
+ '[' lpr = lpr ']'
++ uname -s
+ '[' Linux = Linux ']'
++ echo -P '"\\askit\PRN01F8"' -#1 '"/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf"'
++ tr -d '"'
+ /usr/bin/lpr -P '\\askit\PRN01F8' -#1 '/wls/asinst_1/reports/cache/\\askit\PRN01F8gFTQkG5v.pdf'
/usr/bin/lpr: The printer or class was not found.
+ exit 1
=============================================================
I didn't do any configuration in Enterprise Manager for Printer Configuration. Is this the reason? Is any thing I missed out?
Environment Setup:
Server Side:
Oracle Linux 5 (No printer is setup)
Oracle Weblogic Server 10.3.6
Oracle FMW Forms and Report 11.1.2
Configure: In-Process Report Server
Client Side:
Window 7
Printer: Default network printer set with client
Best Regards,
Fani

Hi,
the first thing you need to check is if you are able to print from the OS using the same lpr command that reports is using and using the printer queue being used when you submitted the report request.
Try to print any file from command line using lpr and your print queue \\askit\PRN01F8. If this does not work then that needs to be fixed from the OS standpoint before running report to printer.
Hope it helps
Regards, RZ

How to Setup Transport on Windows Server

Hi guys,
I'm trying to setup a transport between two systems. I have done it inthe past in Unix but never done it in Windows. It is kinda difficult for me in Windows.
Can you please help me understand the setup.
Server 1. >> PC1
Server 2. >> PC2
I have made PC1 a domain controller and shared its /usr/sap/trans to PC2. Also updated TMS parameters in PC2 pointing DIR_TRANS to PC1/usr/sap/trans, but It is not showing up in PC1 (domain controller)
Your help appreciated!!
Thanks,
Afi

On the Server where you want to share \usr\sap\trans for the landscape( I assume Server1 or PC1 in your terms), login as windows domain admin ( or with admin rights) --> right click my computer --> Manage --> click on Local Users and Groups --> Double click on administrators --> and add users of SAPService<SID> of the other server ( your Server 2 or PC2) and clock pk Ok.
This should resolve the problem.
Concept is, giving other server to read and write access to shared drive of Transport directory. There can be no. of days do implement it depending on in House Windows Skills and Secuirty audits, but the above method works.
Thanks,
Krishna

How to setup NTP service in server 2012 R2 to synch with an external NTP server

Server 2012 R2 Std as DC
I have looked at the blogs on setup and could not make sense of them. I did this easily on SBS2008 before I migrated to 2012 R2.
What is the process to establish the DC server 2012 R2 as the time source. Right now it is BIOS clock and I wish to move to NTP as the time source.
Thanks for your help
John Lenz

Hi JohnLenz,
You can use the following command line and refer the following KB:
w32tm /config /syncfromflags:manual
w32tm /config /manualpeerlist:<IP_or_FQDN_of_the_time_source>
Note: please replace "<IP_or_FQDN_of_the_time_source>” with the IP address or FQDN of your NTP server.
Net stop w32time
Net start w32time
The related KB:
Synchronize the Time Server for the Domain Controller with an External Source
http://technet.microsoft.com/en-us/library/cc784553(v=ws.10).aspx
Configure the Time Source for the Forest
http://technet.microsoft.com/zh-cn/library/cc794937(v=ws.10).aspx
Configuring a time source for the forest
http://technet.microsoft.com/en-us/library/cc784800(v=ws.10).aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to setup a mac mini server

Have new Mac Mini Server, need to setup on a network that is primarily a windows environment, the PC Servers are 2008 R2. Is there a easy to follow step by step installation guide for this environment?

What function is the Mac Mini to perform on the network?
There is a forum for server software
https://discussions.apple.com/community/servers_enterprise_software/os_x_server
You may find better answers there.

How to setup in-process report server 11g on linux for destype=mail

Currently, getting Error when send report as an email attachment destype=mail. Is there any thing missed out during Mail server configuration?
REP-50159: The report generated successfully but distribution to destinations failed.
REP-50152: Destination ID ProfitLoss failed with error An error occurred while sending mail: null..
Call report via Oracle form with destype=mail, desformat=PDF and [email protected]
Log file: rwserver_diagnostic.log
[2012-05-13T17:04:39.273+03:00] [WLS_REPORTS] [INCIDENT_ERROR] [REP-50152] [oracle.reports.server] [tid: 16] [userId: <anonymous>] [ecid: 0000JT6ULwsATOG6yz6iMG1Ffvn4000000,1:18567] [APP: reports#11.1.2] REP-50152 : An error occurred while sending mail: null. [[
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
     at oracle.reports.utility.Utility.newRWException(Utility.java:1053)
     at oracle.reports.server.MailService.send(MailService.java:588)
     at oracle.reports.server.DesMail.sendFile(DesMail.java:186)
     at oracle.reports.server.Destination.send(Destination.java:578)
     at oracle.reports.server.JobObject.distribute(JobObject.java:2041)
     at oracle.reports.server.JobManager.updateJobStatus(JobManager.java:2763)
     at oracle.reports.server.EngineCommImpl.updateEngineJobStatus(EngineCommImpl.java:154)
     at oracle.reports.server.EngineCommPOA._invoke(EngineCommPOA.java:94)
     at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
     at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
     at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
     at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
     at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
     at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
     at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
     at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
     at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
     at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
     at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500
Able to print report via Oracle form with destype=CACHE, desformat=PDF.
Mail Server Parameters are defined.
EM > Reports Application Basic Configuration > Mail Server Parameters
Mail Server, Mail Server Port, Mail Server Username, Mail Server Password Key.
Environment:
Server Side:
Oracle Linux 5
Oracle Weblogic Server 10.3.6
Oracle FMW Forms and Report 11.1.2
Configure: In-Process Report Server
Client Side:
Window 7

Now, reported issue is resolved, able to send report when destype=mail
Go to EM > Report Server > Administrator > Advanced Configuration:
Under this section "Reports Pluggable Destinations" add
New Destination Name: mail
Class: oracle.reports.server.DesMail

How to setup Tibco EMS as the JMS Provider

Hi,
Are there anyone know how to setup the app. server to use Tibco EMS (installed in a remote machine) as the JMS service? May I have the setup example?
I put the host name and port of the EMS server on the Configuration JMS page. I ping the setting but I got the following:
An error has occurred.
Operation 'JMSPing' failed in 'resources' Config Mbean. Target exception message: [C4003]: Error occurred on connection creation [10.0.0.104:7222]. - cause: java.lang.NumberFormatException: For input string: "�"Any idea?
Thanks a lot for your help in advance.
Simon

Hi,
Are there anyone know how to setup the app. server to
use Tibco EMS (installed in a remote machine) as the
JMS service? May I have the setup example?The default jms commands [like jms-ping] are designed to be used against Sun Java System Message Queue that is bundled with the appserver. For integrating third party JMS providers like Tibco EMS, could you try out Generic RA for JMS [http://genericjmsra.dev.java.net]
Detailed instructions on getting Sun Java System Application Server to work with Tibco EMS using Generic RA for JMS is available off
https://genericjmsra.dev.java.net/docs/tibco-genericjmsra-integration-sample-doc/Integrating_Sun_Java_System_Application_Server_with_Tibco_JMS_using_the_Generic_Resource_Adapter_for_JMS.html
Thanks
--Siva.

How to Setup JMS in Siebel Server

Similar Messages

Maybe you are looking for