How to setup labview for work with Rational ClearCase

Has anyone set-up an interface between LabView and Rational ClearCase.

Have you looked into the tools from V I Engineering? They are about to release a product that does the ClearCase to LV interface

Similar Messages

  • How to configure Ogone for working with business catalyst ?

    How to configure Ogone for working with business catalyst ?
    In france ogone seems to be the only solution for seamless payment and there's no explications on the forum to configure it.
    Thx for your answers

    Hi ,
    [Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp101.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf] might be useful.
    Check [Master guide|https://websmp201.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf]  also.
    Regards
    Naveen
    Edited by: Naveen kumar Palanichamy on Feb 19, 2009 6:38 AM

  • HT2497 how to setup airport to work with IPV6

    How can I setup my AE to work with IPV6 that was launch last night in the east coast? Or there is no need for me to do anything on my AE because it will setup itself automatically?
    Thanks,
    TCFL

    IPv6 service comes in a variety of "flavors" so it would be difficult to provide you with exact configuration settings for your AirPort router.
    I would first check with your ISP to see if they have implemented IPv6 service. If they have, they should provide you with what requirements must be satisfied to use IPv6.

  • How to setup ERMS to work with Webforms?

    Hello,
    we want to use webforms, so that customers can post requests via internet. The webforms will be send by the webserver internal via email as XML-Attachment to SAP-CRM. I can't find any documentation about how to make CRM(5.0) read the informations from this webform and to use these informations for routing with ERMS or even the creation of activities. The ERMS_how_to and ERMS_guide_for_consultants I allready know, but it's only written there, that it is possible and not how. Do I need to setup TREX and a knowledge base also for these functionalities?
    Right now it's only possible for us to route these email by subject (created automatical by the webserver)
    Will reward points for needfull help. Thx
    Carsten

    Hello,
    we want to use webforms, so that customers can post requests via internet. The webforms will be send by the webserver internal via email as XML-Attachment to SAP-CRM. I can't find any documentation about how to make CRM(5.0) read the informations from this webform and to use these informations for routing with ERMS or even the creation of activities. The ERMS_how_to and ERMS_guide_for_consultants I allready know, but it's only written there, that it is possible and not how. Do I need to setup TREX and a knowledge base also for these functionalities?
    Right now it's only possible for us to route these email by subject (created automatical by the webserver)
    Will reward points for needfull help. Thx
    Carsten

  • How to setup discoverer to work with portal in future

    Hi,
    I have to setup the environment for a discoverer 10g R2 based reporting application.
    The application is supposed to display reports on the portal that is hosted on Oracle 10g AS.
    I started with installation of Oracle 10g R2 DB server. I have the Oracle BI suite 10g , Oracle 10g AS, Oracle 10g Portal etc with me.
    Can someone guide me as to how should I proceed in the installation step-wise so as the repoting application can be hooked on to the AS and displayed in portal.
    The slight catch here is there is a separate team working on developing the portal.
    I need to know what is to be done so that there is a smooth merger of discoverer with the portal.
    Thanks
    Goga

    Hi
    The interaction between Discoverer and Portal takes place after you have installed the full-blown application server. Stand-alone Discoverer cannot be made to hook into Portal.
    When you install the full application server you need an infrastructure database. You either do this manually by inserting the repository components into an existing database or you use the seeded database that comes with the install. Personally, I prefer the seeded approach.
    After you have installed the infrastructure you run the installer a second time and install the middle tier. While you can install the infrastructure and middle components onto the same machine, performance is better if you use different machines. However, if you are only trying to test things out, doing all of this on one machine would be ok.
    After you have got your middle tier components installed (Discoverer and Portal), make sure they are working. For Discoverer you will need to have an EUL. For Portal you only need to be able to connect to it.
    Next, and only now comes the link between Discoverer and Portal. All you need to do is tell Portal that the link is to be enabled. This is called creating a portlet provider.
    To create a portlet provider for Discoverer follow this workflow:
    1. Connect to Portal as Portal user
    2. On the top right, click the Administer tab
    3. You will see three further tabs, this time on the left, called Portal, Portlets and Database
    4. Click the Portlets tab
    5. Locate the Remote Providers box on the top right hand side
    6. Click Register a Provider
    7. In Provider Information enter the following:
    a) a name - for example Discoverer
    b) a Display name - for example Discoverer
    c) Timeout - for example 30 seconds
    d) Timeout message - for example Please try again later
    e) In implementation Stype select Web
    f) Click the Next button
    8. In General Properties enter the following:
    a) In URL type http://hostname:port/discoverer/portletprovider
    Eg. http://server1.learndiscoverer.com:7778/discoverer/portletprovider
    You may need to omit the port on some systems so that it would look like this:
    http://server1.learndiscoverer.com/discoverer/portletprovider
    Note: type discoverer/portletprovider as stated
    If you do need a port and are unsure as to which port number to enter follow this workflow:
    i) Launch a second browser window
    ii) Type http://hosntame:1811 (or whatever is the AS Control port on your system) and press Enter
    iii) In username enter ias_admin and the associated password
    iv) When authenticated, you will see the Farm for your infrastructure and mid tier
    v) Cick on the mid tier instance (you may need to enter your ias_admin username and password again)
    vi) Click the Ports link alongside the word Home at the top of the screen
    vii) Note the port number for your HTTP Server Listen(non-SSL) port
    viii) Close AS Control and go back to the portlet provider setup
    b) Check the box Web provider in same cookie domain as the portal
    c) Leave other defaults as they are and scroll down to section called User/Session Information
    d) In User/Session Information check User and specify that the frequency should be Once per user session
    e) Click the Next button
    8. In Grant Access leave this alone and click the Finish button
    9. If you get a warning about the cookie domain click the OK button
    10. Exit Portal
    You have now successfully created a portlet provider for Discoverer
    To test that this is working enter one og these in your browser window:
    If using ports:
    http://hostname:port/discoverer/portletprovider
    If not using ports:
    http://hostname/discoverer/portletprovider
    The system should respond with Congratulations! You have successfully reached your Provider's Test Page
    Does this help?
    Regards
    Michael

  • How can I configure labview for communication with Modbus I/O?

    i read a article about configureing Labview for communication with modbus I/O in NI developer zone, but it was written for Labview 6, how can I configure it with labview 7. it seems there are some difference. Thanks!

    In both LabVIEW 6 and 7, you connect to modbus using Lookout Protocol Drivers (LPD) and then communicate to LPD using the tag engine of LabVIEW DSC or through DataSocket.

  • I have downloaded MAMP for Mac and want to use it for working with Wordpress. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!

    I have downloaded MAMP for Mac and want to use it for working with Wordpress. I'm on an Imac with Maverick OS 10.9. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!

    It depends on how you installed it. You have to shutdown the MySQL service first. If you used the standard, but obsolete Startup Item, you can do that with the Startup Item. If you created a launchd script, you can do it with launchctl. Once MySQL is no longer running, you can delete the Startup Item or launchd script and the rest of MySQL.

  • Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own?
    Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
    If each has their own does each id have to buy their own music and apps?
    Yes, all purchases are non-transferable.
    How does find my iphone work with one apple id or two?
    Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
    I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
    If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

  • Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

    I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
    I have sticky keys enabled.
    When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
    The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
    When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
    If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
    Has anyone figured out how to get speech recognition working with sticky keys enabled?
    Or a way to get an individual key shortcut to start on the first press and process it on the second?
    Or a way to get key combinations to work, as specified by the help:
    Dictation On and Off
    To use Dictation, click On.
    When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
    Shortcut
    By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
    To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

    I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

  • Tips for working with USB floppy drives

    I was just wondering if anyone had any tips on working with USB floppy drives in Archlinux.
    One thing I've noticed is that trying to use mkfs.msdos on my USB floppy drive directly doesn't seem to result in a usable disk (it's mountable, but reports that I don't have enough space available to copy files), but if I use the command on an image file the same size as a floppy disk and then use dd to copy the blank image to my USB drive I get a disk that's perfectly usable.  Anybody know what the deal is with that or how I might be able to successfully format a disk in fewer steps (other than keeping the blank images around and just using dd to format the floppies, haha)?
    Also, I'd like to hear any other tips or tricks any of you have for working with USB floppy drives.  They just seem so much more usable under Windows as opposed to Linux, and that disappoints me a little.

    jmetal88 wrote:Okay, thanks guys.  I haven't figured out the issue yet, but you're helping me narrow it down.  I decided to run a df -h command after each try of formatting the disk this time.  I tried the low-level ufiformat command followed by a mkfs.msdos on the device, using a 720k disk, and df -h showed 700k free on the file system.  It's just not making the file system large enough (I believe the file I was trying to copy over was 710k or so).  When I run mkfs.msdos on a 720k disk image and then dd the image over to the drive, df -h shows 713k free after mounting the drive.  Any idea why mkfs.msdos isn't filling out the full 720k on the disk itself, but is on the image?
    I would assume this happens because (as far as I can tell from skimming through the source over the course of a few minutes) mkfs.fat only applies floppy size heuristics to fd and lo devices -- your USB floppy drive is treated as a hard drive, and that leads to less-than-ideal default parameters. Run
    fsck.fat -v
    on the more spacious filesystem to figure out what options need to be set when you attempt formatting an actual disk. Or just make things easier by keeping newly-formatted blank disk images on hand so that dd and (maybe) ufiformat are all you need to worry about.

  • Best practices for working with large placed bitmap images?

    Hey all,
    I need some advice on the best way to approach building these files. I've been working on some banners that are very large: 3 x 7 feet.
    Each banner has a simple vector graphic treatment at the top and bottom (rectangle with a different colored rule on top, and vector logo) and a small amount of text, just a URL and a headline.The headline is type (not converted to outlines) and usually has some other effect applied to it, say a drop shadow or outer glow. Under these graphics is a full bleed image. The placed images need to be 150ppi at actual size, so they're honking big, sometimes up to 2GB. Once the layouts are approved, they have to go to a vendor for output.
    The Illustrator docs are really large, and I've read in other threads how to combat that (PDF compatibility, raster settings). But even still, does anyone have any insight into the best way to deal with these things? The dimensions are large, and then the images are large, and it just makes for lots of looking at the spinning ball of death...
    If it were me, I'd build them in InDe, but the vector graphics need to be edited for each one, and I so don't like to do that in InDe unless forced. To me, it's still ultimately a page layout app, not a drawing app. (Old school here.)
    FYI, our machines are all MBPs with 8G ram and the latest Intel Core 2 Duo chips, 2.66 and 2.8GHz. If we keep the files local (as opposed to working on the server) it should be fairly zippy... No?
    Any advice is appreciated, thanks!

    You can get into memory trouble with very large placed pdf files. Tiffs too.
    This has to do with the preview, which contains much more information than you need for working with.
    On the other hand if you place EPSs and take care not to turn on overprint preview you can get away with huge files.
    If you do turn on overprint preview your machine will slow down a lot and the file may become totally unmanageable.
    Compare this with to InDesign where you can control the quality of the preview. A hi-res preview will slow you down and most often you don't need it anyway.
    I was working (in Illie) the other day on much larger files than you mention – displays for whole walls – and had some considerable trouble until I reverted to the old EPS format. They say it's dying but it ain't dead yet .

  • How to setup guest net work in airport extreme

    Hi,
    i have how to setup guest net work in airport extreme?
    i have the airport extreme and the airport base station as a range extantion.
    all is workig good :-)/
    i the init setup (od the extreme) i setup the router to support also guest network with password.
    when i scan the network i canor see the guest network.
    also i canot set it up from the air play (win7 sp1)
    THX :-)

    Mmm, generally you don't need to do much port mapping in an extreme. Not sure I understand you.  What does the d-link do?

  • Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

    Thanks for the reply. I'll have a look at your solution.

  • How does the newest Iphone work with Ford Sync?

    How does the new Iphone work with Ford Sync? I was thinking of purchasing the 4s but may go elsewhere if there is a better phone for the equipment in my vehicle.

    That would be a NO.. I should have done my homework before I switched to IPhone because the Bluetooth just does not want to sync with my Ford Truck. Its such an inconvience. But I see from other posts that Ford isn't the only car experiencing problems. So Hopefully Apple fixes this problem QUICKLY!

  • How to setup variants for webdynpro report in ABAP? Help!

    Hi Experts,
       I have a webdynpro for ABAP report with selection screen. 
       How to setup variants for webdynpro report in ABAP?
    Thanks
    Gopal

    Hi Gopal,
      There is no concept of Variant in Webdynpro ABAP. But in our project we have some tool to do that. Its not release to the client I think. In my scenarieo, We create the Screen variant and program name will be supplied to the tool that will generate the ouput in PDF and Selection screen in One view. But the same is not avilable .
    If you want the same concept in Webdynpro ABAP, you need to go for Dynamic programming only. This is the only option is avilable.
    Warm Regards,
    Vijay

Maybe you are looking for