How to setup lan internet on my PowerPC G3

I recently got the PowerBook4,3 and I can't seem to connect to the internet using my lan cord, I am new to using mac. Bill

Hi, and welcome to Apple Support Communities.
Thanks for posting back and letting us know what worked for you. It may help someone else in the future.

Similar Messages

How to setup dialup internet connection(PPP) in Solaris for ADSL modem

I ,m new to Solaris. How to setup dialup internet connection(PPP) in Solaris for ethernet ADSL modem? will solaris recognise the ethernet modem?? I only have windows drivers for the ethernet modem. Where to look for info on this?

The setting you set in IE also affects Firefox. For example, if you set the following, then when Firefox makes a connection request to Windows, Windows is supposed to dial the connection:
Windows Control Panel > Internet Options > Connections or <br>
Internet Explorer Tools menu > Internet Options > Connections
"Dial whenever a network connection is not present"
Source: [[How to make Firefox automatically dial up]]

How to use LAN internet from PC in N79 ?

Hi there.. As question states, I want to use PC internet in N79. I have a 2Mbps ADSL broadband connection through LAN in my PC. I want to use that in my N79. I know it is possible other way round using PC Suite. Can I access PC internet in my N79 ? If yes, please tell how. What are the settings ?

I too have a N-79 mobile. when i connect to a wireless network i was asked a WEP key. I gave the key and got connected. when i surf through the browser i get this error "Gate-way Error". How do i solve this problem. kindly help me out. I have a Lenovo laptop with wi-fi facility. and 2Mbps BSNL broadband.
Message Edited by samresh22 on 23-Dec-2009 05:51 AM

How to setup LAN ? while installing 11.5.10

Hi,
I am Installing 11.5.10 on windows 2003 server enterprise edition. I use cable net for Internet. I m installing 11i on single node. I have tried to install 11i on windows 2000, windows 2000 advance server and 2003 server. having same error.
I can ping my computer ip and using host name
ping 10.0.1.148 -t
ping oracle.apps.com -t
LOG file created by 11i rapidwiz installation shows it as
"Statusstring InstantiateFile -d F:\oracle\proddb\9.2.0\appsutil\template\addbtmpl.drv"
D:\DOCUME~1\oracle\LOCALS~1\Temp>if 2 == 0 goto :CFG_OK D:\DOCUME~1\oracle\LOCALS~1\Temp>echo "Unable to complete Instance Configuration"
"Unable to complete Instance Configuration"
There was an error while running the command - F:\oracle\proddb\9.2.0\temp\PROD_oracle\adrundb.cmd APPS APPS
and Listner Error log file is showing it as
LSNRCTL for 32-bit Windows: Version 9.2.0.5.0 - Production on 10-AUG-2005 16:23:08
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPROD))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=TCP)(Host=oracle)(Port=1521))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
32-bit Windows Error: 61: Unknown error
LSNRCTL for 32-bit Windows: Version 9.2.0.5.0 - Production on 10-AUG-2005 16:23:09
Copyright (c) 1991, 2002, Oracle Corporation. All rights reserved.
Starting tnslsnr: please wait...
Failed to open service <OraclePROD_db920_RDBMSTNSListenerPROD>, error 1060.
TNSLSNR for 32-bit Windows: Version 9.2.0.5.0 - Production
System parameter file is F:\oracle\proddb\9.2.0\network\admin\PROD_oracle\listener.ora
Log messages written to F:\oracle\proddb\9.2.0/network/admin\prod.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCPRODipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle.apps.com)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCPROD))
STATUS of the LISTENER
Alias PROD
Version TNSLSNR for 32-bit Windows: Version 9.2.0.5.0 - Production
Start Date 10-AUG-2005 16:23:11
Uptime 0 days 0 hr. 0 min. 2 sec
Trace Level off
Security OFF
SNMP OFF
Listener Parameter File F:\oracle\proddb\9.2.0\network\admin\PROD_oracle\listener.ora
Listener Log File F:\oracle\proddb\9.2.0/network/admin\prod.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCPRODipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle.apps.com)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PROD" has 1 instance(s).
Instance "PROD", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
addlnctl.cmd exiting with status 0
ChangeServiceConfig succeeded
adsvdlsn.cmd exiting with status 0
ERRORCODE = 0 ERRORCODE_END
.end std out.
System error 1060 has occurred.
The specified service does not exist as an installed service.
.end err out.
Executing script in InstantiateFile:
F:\oracle\proddb\9.2.0\appsutil\install\PROD_oracle\afmkinit.cmd
script returned:
Wed 08/10/2005
04:23 PM
1 file(s) copied.
1 file(s) copied.
1 file(s) copied.
"afmkinit.cmd exiting with status 0"
ERRORCODE = 0 ERRORCODE_END
.end std out.
.end err out.
Executing script in InstantiateFile:
F:\oracle\proddb\9.2.0\appsutil\install\PROD_oracle\afdbprf.cmd
script returned:
Wed 08/10/2005
04:23 PM
ECHO is off.
ECHO is off.
Wed 08/10/2005 04:23 PM
PROD_oracle.cmd exiting with status 0
"The environment settings are as follows ..."
" ORACLE_HOME : F:\oracle\proddb\9.2.0"
" ORACLE_SID : "
" LOCAL : PROD"
" PATH : F:\oracle\proddb\9.2.0\Apache\perl\5.00503\bin\MSWin32-x86\;F:\oracle\proddb\9.2.0\bin;F:\oracle\proddb\9.2.0\jre\1.4.2\bin;F:\oracle\proddb\9.2.0\jre\1.4.2\bin;E:\11istage\startCD\Disk1\rapidwiz\unzip\NT;D:\MKS\bin;D:\MKS\bin\X11;D:\MKS\mksnt;D:\WINDOWS\system32;D:\WINDOWS;D:\WINDOWS\System32\Wbem"
" LD_LIBRARY_PATH : F:\oracle\proddb\9.2.0\lib"
"Running SQL script "
SQL*Plus: Release 9.2.0.5.0 - Production on Wed Aug 10 16:23:22 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-01034: ORACLE not available[b] (I can see ORACLE.EXE is running under user system and i m installing 11i under USER NAMED "ORACLE")
ORA-27101: shared memory realm does not exist
ERRORCODE = 3 ERRORCODE_END
.end std out.
.end err out.

Hi,
I am very glad to see your response.
U are right about my 256mb ram. I am also thinking to increase it.
I have done a very bad mistake and I accept it. My mistake was that I put my computer name as "Oracle" and made the user name also "Oracle".
I just changed user name to INSTALL and the installation went fine.
I have installed 11i successfuly saturday evening and I have also logged in.
It has taken nonstop 7+ hours to install.
It realy takes 15 minutes to boot and start services.
I have increased the paged files size to 3 gb. It realy helped me a lot in starting the services faster.
Now I m facing 2 problems "connection manager" and "listner" are becoming dead by theirself and win2003 server giving "RPC" error and rebooted several times.
A friend told me to Install 11i in Red Hat Linux 9 and from yesterday I m working on it.
If u have any suggestions; kindly help.
Again, I realy appriciate your deepest concern.
Thanx and Best Regards.
Rashid

How to setup local FTP

Earlier I asked how to setup LAN
http://bbs.archlinux.org/viewtopic.php?id=12874
How to upload files on LAN? How to configure?

For a long time I have used FTP for LAN file transfers. Actually I am running NFS for my Linux Desktop and Samba for my roommate.
A FTP service is very fast and easy to set-up and can be used by windows or Linux. I you just want to transfer file or do some backups, this is great ! vsftpd is the fastest and most secure ftp sever I have saw until now. Well documented too. Actually you have to read documentation if you want it to work with your local system users on your server. Unless you already know how to configure vsftpd... It is quite easy actually.
proftpd works out of the box with local system users non chrooted. Just pacman -Sy proftpd then /etc/rc.d/proftpd start and you have a nice ftp server. If you want to open your server to the world, I strongly recommend vsftpd !
FTP is ok for sharing small amount of files not accessed too often. For sharing large amount of files, you are better with NFS for Linux and Samba for Windows. I you need help with these, just ask !

How to setup a vpn over the internet

Hi ,
how to setup a vpn over the internet ? Just I have using window server 2012 r2, I already install 'remote access service' also ready enable VPN service but I can't connect to vpn server over Internet(Other network), when I connect from LAN , vpn service
is enable I can connected. My ADSL router also Enable VPN access(PPTP, L2TP, IPsec). But I can't access my server over Internet :'( . What I need to do? Help me please.
Thanks,

Hiya,
Did you have a look at this guide? - It gives you all the steps.
http://www.howtogeek.com/135996/how-to-create-a-vpn-server-on-your-windows-computer-without-installing-any-software/

How to connect to Internet through a LAN

Hi everybody !!!
Please show me how to connect to Internet through a LAN (through another computer).
On Windows XP system, i use the following informations to do that:
+ My IP: 192.168 .1.45
+subnet mask: 255.255.255.0
+default getway: 192.168.1.12 (IP of another machine)
+Preferred DNS server: 85.255.192.2
+Alternate DNS server: 195.131.52.130
and in IE i use the proxy server: 192.168.1.12:8080
Thanks alot !!!

Just how is the one computer connecting to the internet? What type of connection does the office have, DSL, Cable or is it a Data connection through a Cell phone provider.
I doubt all other computer are doing Ad-Hoc but are probably Sharing the Internet connection with Internet Connection Sharing from that one Windows base PC.
All you khave to do is Connect to that same WiFi SSID name and have the correct password for it.

HT1515 How to setup laptop use both 3G internet and audio via Airport Express

Laptop connected to internet via 3G mobile phone network, but when connected simultaneously an Airport Express to stream audio, the laptop can not connect to internet as it try to connect internet through Airport Express. So how to setup to use both.

Thanks jakeloveslucy.
I tried to setup the network by using Airport Utility, the problem is Airport Utility can not find Airport Express while I can use Airport Express to stream music very well. Can you suggest to fix this.
I use windows 7 64 bit sp1 ; Airport Utility 5.6.1.
[img]http://no4.upanh.com/b2.s29.d3/cc356ba2635bf1f46b71912fa1e6ce43_46991874.2012070 8133759.jpg[/img]
[img]http://no6.upanh.com/b4.s29.d4/a0f5f05c0f2ec0f5e94b40bc7c8e2986_46991876.2012070 8135000.jpg[/img]

HT5848 How to use our lan internet for iphone 5s

How I may use my lan internet for iphone 5s

You need a wifi router and then connect the iPhone to that.

How to setup Adobe CC to use Firefox instead of Internet Explorer

How to setup Adobe CC to use Firefox instead of Internet Explorer

Hi mOmO,
Please chage the default browser to Firefox: http://support.mozilla.org/en-US/kb/how-make-web-links-open-firefox-default.
Regards,
Romit Sinha

How to Setup/Remove Norton Internet security properly

http://windows-8-1.blogspot.ca/2013/09/How-To-Install-Norton-Internet-Security.html

Hello Vineeth we seem to have a customer that has a problem with Norton could you help once again the topic is here
http://social.technet.microsoft.com/Forums/windows/en-US/7cd22ca7-2ec9-40f6-bf01-c7626ecc8c02/0xc0000225-file-windowssystem32winloadefi-is-either-corrupted-or-missing?forum=w8itprogeneral
had a smilar problem few days ago. I have a Samsung ATIV Tab Pro with Windows 8. It updated it self to 8.1 and after configuration i tried to restart but it didn't open! Gave me 0xc0000001 windows.efi error. I could reach BIOS, help screen with F8 and
Recovery screen. But non of them was solved problem. Until I found this solution from a hard to discover subject >
Press F8. This will open a screen tagged like "Start-up Configurations" with 9 options. Press
8) Disable early launch anti-malware protection.
After this, my Tab PC opened like nothing happened! I guess problem was caused by Norton during update which had came on PC. I deleted
Norton and installed Avast. Now it works fine!
My point is, if you have a similar situation likes this, try this solution before recovery, USB, bla bla..
It is recommended to disable all protection no matter what you use when major system updates. This has been since virus software began, including Defender

How do I share files between a PowerPC 8100 OS 7.6.1 and an iMac OS 10.7.4 over ethernet

How do I share files between a PowerPC 8100 OS 7.6.1 and an iMac OS 10.7.4 over peer to peer ethernet connection? I'm trying to get data off the old machine so I can retire it for good. Can I just save the data and worry about file conversion later?

Addendum
There is a relatively simple server-based way of avoiding difficulties with incompatible system versions et cetera. It could possibly be of some interest.
I tested the following between a System 7.5.3 PowerBook 540 and a Windows XP PC. It ought to work with a System 7.6.1 Power Macintosh 8100 and a MacOS X 10.7.4 iMac as well.
a) Download and install Microsoft Personal Web Server 1.0 for Macintosh onto the 8100. If the 8100 does not have a direct Internet connection, carry out the download on another computer, and then try to transfer the hqx file (as it is) on a CD-R (burn at a low speed) or a 1.44 MB floppy (use StuffIt Expander to decode the hqx on the 8100). Do not change or add anything after the installation; just leave the files as they are.
http://support.microsoft.com/kb/164571
b) Drag a compressed example archive (we can call it example_file.sit) to the folder My Personal Web Site (there are other files inside this folder; do not worry about them). Ensure that the compression format is compatible with a decompression tool on the receiving computer.
c) Many people have access to a router (wired or wireless) with a built-in Ethernet switch (usually something like four LAN ports). If applicable, disconnect any incoming Internet (the WAN port). If possible/necessary, switch off the wireless (see the router manual for details about this).
d) Switch off both computers (and the router).
e) Connect an AAUI to RJ-45 transceiver (such as the aforementioned Apple Ethernet Twisted-Pair Transceiver) to the AAUI port of the 8100.
f) Connect an Ethernet cable from the transceiver to the first LAN port of the router.
g) Connect an Ethernet cable from the second LAN port of the router to the iMac.
h) Switch on the router.
i) Start the computers.
j) The TCP/IP control panel on the 8100 is set to connect via Ethernet. DHCP Server is used in this case.
k) Open the Microsoft Personal Web Server control panel.
l) Click on the Start button.
m) Wait (can take a while).
n) Notice the exact address at My URL (under Monitor Web Site). Could be something like http://192.168.1.2 (depends on the router).
o) Launch a web browser on the iMac (I did the testing on the PC with Firefox and Safari).
p) Enter the exact address (see n above) in the browser's address field (http://192.168.1.2 in my example). Press Return. A standard web page should appear. Disregard this page for now.
q) Add the exact file name (example_file.sit) to the address shown in the field. The result would be http://192.168.1.2/example_file.sit in my case. Press Return.
r) The file should start to download to the modern computer.
All the above is intended for a local connection only (otherwise security settings become of importance), and should be considered purely experimental. There are further possibilities (including an FTP plug-in), but it also makes everything more complicated. I have not tested the behaviour with large files or with various files types. Sometimes the server may crash. If so, try a restart. Make sure that you have backup copies of important files already at the 8100 before you begin.
Good luck!
Jan

WRV210 How to setup 5 VLAN?

Hi,
I have a WRV210 router and the manual says it can have 5 VLAN. I can also see the SSID or Ethernet Port can be assigned to a particular VLAN via the Web Admin page.
However, I don't know how to setup the extra 4 VLAN from the Web Admin page.
Currently, only one LAN I can setup is the default LAN (192.168.1.1) by default.
Thanks for anyone who can show me how to add more VLAN to this router.
Best regards,
Marcos

davcbr wrote:
Oh yeh; then throw out the other four routers.
Actually he can use the routers as AP's...you just need to assign them a specific IP then cascade them so they would act like switches...
Router A connects to the Internet and is set to DHCP ON (LAN IP 192.168.1.1)
Router B DHCP OFF (LAN IP 192.168.1.2)
Router C DHCP OFF (LAN IP 192.168.1.3)
Router D DHCP OFF (LAN IP 192.168.1.4)
Router E DHCP OFF (LAN IP 192.168.1.5)
You must connect from router A's regular port to a regular port also on the other routers....you can also connect the other routers (345) on the regular ports of the
first routers...just as long as you have them connected on port 1 2 3 or 4 it will act like a switch...
"The war between heaven and hell depends on the choices we make, and those choices require sacrifice. That's the test"

How can I route internet traffic over IPSec point to point?

I have a remote site that connects by IPSEC with the end points on a router and ASA. The connection is working fine and the remote site can access my other networks at the main headquarters. The problem is, currently this remote site is accessing the internet via the same link that is supposed to VPN everything back to headquarters. I need to figure out how to VPN their internet traffic to my main headquarters. There's an IPrism behind the firewall to filter web access so it seems like I need to point the remote sites default gateway to my routing device that's behind my Iprism?
Also, currently the outside interface on the remote site's router does not have an ACL applied, can someone suggest what that ACl should look like? Thank you for your help! Here is a sample configuration of the remote site's router:
crypto isakmp policy 20
(encryption parameters here)
crypto isakmp key password address x.x.x.x (Public ASA IP) no-xauth
crypto ipsec transform-set remotesite (encryption parameters here)
crypto ipsec df-bit clear
crypto map Mainsite 1 ipsec-isakmp
set peer x.x.x.x (Public ASA IP)
set transform-set remotesite
match address 100
interface FastEthernet0/0
description $ETH-LAN$
ip address 10.1.1.1 255.255.0.0
ip nbar protocol-discovery
interface FastEthernet0/1
description ISP Interface
ip address x.x.x.x (public IP) 255.255.255.0
crypto map Mainsite
crypto ipsec df-bit clear
ip route 0.0.0.0 0.0.0.0 x.x.x.x (ISP's default gateway)
access-list 100 remark Access list Mainsite Access
access-list 100 permit ip 10.1.0.0 0.0.255.255 10.3.0.0 0.0.255.255
and other various headquarter networks...

Hi Mark, you can modify your crypto acl to permit any any on your remote site which will make all traffic goes through the tunnel. Then on ASA you need to do hairpinning on the outside interface. This will make users on remote site to access internet via HQ. But if you do it this way the internet traffic goes straight to internet without having them filtered by your iPrism.
What I am not sure about is if there is a way to do it if you want those traffics to be filtered by the iPrism before going out to internet.
HTH

How to setup my airport for music streaming

Hi all
I would like to use my iPhone and or iPad to stream music from Pandora and Spotify to my 5.1 (Wired) Speakers.
This question is similiar to this thread https://discussions.apple.com/thread/4153687 however i wanted some clarity and thought best to start a new discussion before pulling my hair out doing this the wrong way.
I have an unused Airport Express basestation (A1408) My current home setup is as follows:
Modem Router: (Netgear DGND3700) N600 Wireless ADSL2+ Dual band Gigabit
Home Theatre Computer: Windows 7 (Cat6 LAN Ethernet connection) NO LAN port
AV Reciever: (Onkyo TX-SR309)
5.1 Speakers: Wired connection to AV Receiver (NOT Airplay capable)
Laptop: Windows 7 (Cat6 LAN Ethernet connection)
My question is how to setup the airport, i understand it can be used to enable airplay streaming of music over the existing WiFi network, as these music streaming apps download and play music concurrently i would not want to have to switch between to two seperate WiFi networks. Should i plug the airport into the HTPC? I would need to purchase a LAN Splitter as the only LAN socket is already taken up with my cat6 connection. OR would i plug it directly into the modem/router? This second option is prefereable.
I have attached an image of my setup below. Any advice would be great, Regards Steve
[URL=http://s1293.photobucket.com/user/steve7677/media/homesetup_zps63eaf61c.jpg.html][IMG]http://i1293.photobucket.com/albums/b599/steve7677/homesetup_zps63eaf61c.jpg[/IMG][/URL]

Still slightly confused, with the link you provided i chose scenario 2. All the other secanrios instructed i connect the airport express to my home stereo or powered speakers. As i dont have an aiport express only an airport extreme there is no audio jack and cannot connect it to the stereo/speakers.
option 2: Connecting to an existing Wi-Fi network as part of a roaming network
Ensure that the AirPort base station Ethernet cables are connected as above
I have done this and conected it via ethernet cat6 to the modem/router
Launch AirPort Utility 6.1. The Assistant will automatically configure the Roaming network
Im using windows 7 and cannot find this version of aiport utility, only 5.6.1 - The message comes up: Aiport utility was unable to find any airport wireless device. I am running this utility on my win7 HTPC (which is connected to my modem/router via cat6 LAN) The airport light is blinkng amber.
would you reccommend a hard reset of the airport? or can you provide a link for AirPort Utility 6.1.?
Regards

How to setup lan internet on my PowerPC G3

Similar Messages

Maybe you are looking for