How to setup LAPAC1750-PRO with LAPAC1750 Workgroup Bridge Mode as WiFi Extender

I've got following devices:
1 LRT224 Dual WAN Gigabit VPN Router (Load Balancing)
2 LAPAC1750-PRO Access Points
6 LAPAC1750 Access Points
I'm supposed to make a Cluster between 2 LAPAC1750-PRO and then connect the 6 LAPAC1750 using Workgroup Bridge Mode, but after purchasing and while configuring, I found the strage thing that:
If I need to setup a Workgroup Bridge Mode, the clustering will not be available (so I need to modify the changes on either PRO APs whenever I need to perform some) and the Bridge Mode needs to be disable if Clustering is ON or vice versa.
Spoiler (Highlight to read)
+--- The Configuration ---+
I've made 2 subnets:
192.168.1.x (Existing)
192.168.10.x (New)
and configured 4 APs on each (1 PRO and 3 Normal using Trunking between 2 HP 1910 24 Switches) and then again found some strange thing that:
Only 1 Normal AP can be connected to PRO in a Workgroup Bridge Mode, and vice versa.
+--- The Configuration ---+I've made 2 subnets:192.168.1.x (Existing)192.168.10.x (New)and configured 4 APs on each (1 PRO and 3 Normal using Trunking between 2 HP 1910 24 Switches) and then again found some strange thing that: Only 1 Normal AP can be connected to PRO in a Workgroup Bridge Mode, and vice versa.
+--- The Problem ---+
--- Please correct me if I'm wrong
It supposed to extend the Wireless Range, therefore I need to do the following:
PRO AP needs to connect to the AP 1 of and the AP 1 then connects to AP 2 and so on in Workgroup Bridge Mode ...
OR
All the APs needs to connect to the PRO one by registering one by one in Workgroup Bridge Mode
Thanx in Advance

Thanx! The information is very helpful.

Similar Messages

How to setup the portal with the uniform style for SRM + Esourcing?

how to setup the portal with the uniform style for SRM + Esourcing? We will setup SRM 7 + esoourcing + portal, but as we know esourcing screen style is not same with SRM, so how to uniform the style between this 2 diffirent software? any body have idea?

Hi,
SAP E-Sourcing 6.0 is the solution. It is same look&feel.
Regards,
Masa

How to setup iPad air with apple id?

Our setup - Mac Pro 2009 model at home. My wife and I each with our own iphone. We both share the same Apple ID in order to use the same purchased music, apps, etc.
She just got an Ipad air yesterday and we're trying to setup imessage on the ipad. If she enters in my email address associated with our shared apple ID - message sent by her appear from me. So we added her email address as an additional email - now messages from her come under her name and also under the phone number associated with the apple id.
what is the solution to have imessages from her Ipad come from her?

is it aol id for apple as make sure you've selected that. other wise contact apple as get them to sort it,

How come my macbook Pro doesn't automatically connect to my wifi when it is saved under known networks?

How come my macbook Pro doesn't automatically connect to my wifi when it is saved under known networks and i have the box checked under network settings?

Random35,
does your wi-fi router filter access by MAC address? If it does, then have you added your MacBook Pro’s MAC address to your router’s whitelist of acceptable MAC addresses?

How to Configure Transparent caching on Cat 6500 with CSM in bridge mode?

hi.
I found How to Configure Transparent caching on Cat 6500 with CSM in routed mode.
But,
I need help How to Configure Transparent caching on Cat 6500 with CSM in bridge mode?
Please let me know sample configuration.
thanks.

Hi,
I wrote the document you mentioned and I also wrote the one below.
http://www.cisco.com/en/US/partner/products/hw/modules/ps2706/products_configuration_example09186a00802c1201.shtml
The one with the SSLM is a bridge mode config.
If you replace the SSLM with a cache [or a farm of caches] it would be a similar config.
Replace the SSL21 vserver with an HTTP vserver [most important is to keep the vlan configured on each vserver]
Regards,
Gilles.

Using the 1262 AP in Workgroup Bridge Mode

Client has a building that is located 300Ft apart and would like to provide IP communications for 3-4 IP hadsets back to an IP PBX. They do not want to dig up the parking lot so we proposed using a wireless bridge. I noticed that Cisco discontinue the 1300 and 1400 Wireless Bridge. Can I use a 1262 with external antenna in Workgroup Bridge mode to perfom this functions? I will put a Layer 3 switch on both ends to route traffice (3560C-8). Should I use the Yagi antenna's for outdoor use? Thanks!

You could go WGB, but root/non-root might work better. This will allows you to pass multiple VLAN across the link.
This is a bit old, but it' the Bridge Range utility
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps458/prod_technical_reference09186a00800a912a.xls
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Question re: BR1310 in Workgroup Bridge Mode

When a BR1310 is in Workgroup bridge mode, it can provide a wired connection from the BR to a device. Can it also service wireless users?

If I understand your question you need more equipment to provide wireless connectivity from the location of the WGB. Add a switch/hub to the output of the BR1310 and an Acess Point to one of the hubs ports.

How to setup a network with a time capsule, airport extreme and an airport express?

Hello.
First I want to make it clear all my knowledge off wireless networks is going on forums on the internet, before a couple of months ago I didn't realize wireless networking was so intricate so forgive my lack of experience.
I just bought a time capsule (today, 4th generation), I have an airport extreme bought in January 2011 (they just got refreshed so mine is now one generation old) and the same with my airport express (bought in January).
I originally bought the airport extreme and setup a wireless network using the dual band setup. I have no issues with the 5ghz network and most of my devices run on wireless n so I had no issues with them. my only two wireless devices that can not use the 5ghz network is my iPhone 4's which use wireless n but it has to use the 2.4ghz signal. Problem is in my apartment I am bombarded with other peoples 2.4ghz networks so my signal is terrible 10-15 feet from the airport extreme. Near my extreme I am getting signal ranges around 15mb to 20 mb. When Im about 15 minutes away in my bedroom (so one wall in between) my signal plummets to 1-2 mb. sometimes as low as 0.17mb which is not good. I got the airport express to extend my range and placed it in my bedroom. . After setting up the airport express the signal still was terrible. I researched and realized that if the signal strength ***** then the airport express cant boost the signal as much which makes sense in hind sight. I then researched setting up a roaming network or a WDS network. Per research a WDS network was not recommended b/c I was not using a wireless g network. I attempted to create a roaming network and then realized that you can not use an airport express in a roaming network. This has led me to now buy a time capsule.
First, in my setup do I or should I have the time capsule as the primary? I believe its more powerful than the airport extreme but Im not sure if that matters in a network that is distributing wifi from ethernet (thats how I am connected the extreme and the time capsule)
so can I do
cable modem ETHERNET Airport extreme(in the living room where its always been and works great in that immediate area) (3rd generation) ETHERNET Time Capsule(in the bedroom where I usually get poor signal) (4th gen) and then an airport express connecting to the 2.4ghz signal in the bedroom where the time capsule also is EXTENDING the wireless range?
or should it be the time capsule first bc its more powerful?
I tried setting up this setup and everything is green but I don't know if what I am doing is actually working on full cylinders b/c I am confused on some aspects. mainly on the airport extreme which is the primary device I have under the wireless tab selected create a wireless network and on the time capsule it also is on create a wireless network with the network name being exactly the same. Should it be changed to extend a wireless network? and then bridge mode? Should I have different channels for the different devices that are on 2.4ghz?
I am open to hear ANY suggestions, or ideas to improve my setup. PLEASE PLEASE HELP!!!!!!!, lol its been 5 long months of poor internet in my bedroom where my wife has her setup with a roku box and wifi tv (I have those hardwired for now) but mainly for her iPad and iPhone b/c its so bad sometimes she has to turn wifi off and use 3G. I have same issue in my bathroom, sometimes Im getting decent signal and sometimes its so bad I can't open the link on an RSS feed in safari which I have to assume doesn't require that much bandwith?
I have no wireless g devices. The only device I need 2.4ghz for is my iPhone 4's but they both use n also. All my other deivices connect on 5ghz and my 5ghz network is decent, a lot better than the 2.4ghz network atleast.

You wrote so much that I find it hard to address all your concerns. However, here are some thoughts:
1) I'd configure the Time Capsule as the "main" router, connected directly to your cable modem. Configure it to "create a wireless network" and to "Allow this network to be extended". Configure the other devices to "Extend a wireless network".
2) Put any device that's extending the network half way between the main router and the wireless clients. If the signal from the main router is weak at the cllient's location, then the extending device will also receive a weak signal.

How to setup a group with autentication

Hi, Every body,
I am new in this forum, I found Stratus is a so exciting platform, now I need your help.
I want to setup a group with posting autentication, in the group, some one has the posting right, others have not. I found the "groupspecWithAuthentication, groupspecWithoutAuthentication, encodePostingAuthorization，setPostingPassword" etc. but I cant understand how to use them.
I have dived in this forum and the reference of Stratus 2.0 beta( here) for several days, and I have tried the samples posted by Mike, and I have study almost all threads in this forum, but I still cant find the clue.
Please help me out, thanks advanced,

Thank you, Mike, for your timely reply. Forgive me the delay, because now is our most important festival, I just back from a party.
Now I understand, but I still wonder,
1. if a group is in running, and a authorized user has joined. Now he misdoes, I want to withdraw the authentication, how can I? revise the password and recreate the group?
2. How can I setup a group, just authorized users can join? I know I can use secret group name, but if authorized user divulge the group name, others without autentication can join the group too. ( because the swf easy to reverse, hacker can sniff the opaque groupspec string, revise the swf, impersonate authorized user, etc).
3. How can I banishment a misdoer from my group?
Thanks again for your time.

How long until MacBook Pro with Leopard?

After Leopard is released, how long does is usually take to be able to purchase a MacBook Pro with the newest OS installed? Also, does Apple usually do the same as PC's manufacturers and give out free upgrade certificates about a month before release of a new OS?
Thanks!

It depends on what store you buy it from, you need AFAIK to wait until existing inventory has been sold. You do know that you'll get Leopard free if you buy it shortly before the release date or after.
Personally if you have the need now for a MBP buy it and use/enjoy it now and not worry about Leopard.

How to setup Slingbox AV with Linksys E2500

I just purchased a new Linksys E2500 and I am unable to setup internet viewing with it. I have went in and done the port forwarding and still I have not had any success. I would appreciate any helpful information.

So the concern that you said is the configuration of the Router ( E2500 ) at home.. So could please inform us the name of the ISP( Internet Service Provider )... So it all depends upon the ISP( Internet Service Provider ) setup...
If you want to configure the router with the help of the CD so for that you need to unistall the existing Cisco Connect Software from the computer...
Reset the Router and power cycle the network...Make the following connectivity:
Modem ----> Router -----> Computer
They all should be connected with the Ethernet Cable... Then install the Cisco Connect Software... It will help you in configuring the Router...
As far as Slingbox is concern you did port forwarding but until and unless you are not online it would work....

How to setup remote access with E4200?

Hi,
I am new to this and I need help from you all on how to setup the E4200 so that I can access the media server when I am in office? Is there a guide or step by step procedure on this? I was browsing on the Cisco website and unable to find it.

The purpose of using DDNS is it substitutes the public/WAN ip address provided by your ISP.We all know that the ip address provided by our ISP(if we are not subscribe to a premium static ip address) is basically public and will always change from time to time.So it will be difficult for us to know what's the ip address our ISP has provided us and this will lead us problems accessing our router or ftp server remotely. Thus by using DDNS' it will now allow us to access the router remotely without knowing what's the WAN ip address.

How to setup wireless printing with AirPort Express?

Hey, I just bought a AirPort Express today and I can't figure out how to setup the usb wireless printing. Could someone explain in detail on how to do this? Thanks-Michael
I have a Windows 7 64-bit PC and a Hp Deskjet F380 USB printer.

Download the install Bonjour Print Services for Windows v2.0.2
Run the program. Hopefully, your printer will be recognized.
If it is, "install" the printer and try to print.
Keep in mind that if you have an All-in-One type of device, that only the print function will be supported.
Advanced features like copy, scan, maintenance, etc are not supported. You will need to connect the All-in-One directly to your PC if you need those services.

How to setup a wrt54g router as a wireless access point to extend wifi signal from e3200

how do i setup a wrt54g router as a wireless access point to extend wifi signal from e3200 which is broadcasting the internet?
everyone keeps saying to remove the stock firmware and instal the dd-wrt firmare to do this. can i do this with the stock firmware?
any tips to avoid interfearance once setup?

You have to connect both with a cable.

How to setup airport extreme vs express at WDS mode?

How to setup airport extreme(Main) vs express(Site) at WDS mode?

Please check out the following Apple Support article on how to configure a WDS.

How to setup LAPAC1750-PRO with LAPAC1750 Workgroup Bridge Mode as WiFi Extender

Similar Messages

Maybe you are looking for