How to setup mail on new network

I have a new ISP provider, canceled my old email account. How do I setup the new email ?
I did the regular account setup but the network doesn't recognize. I guess my email is not activated yet.
Can I do anything without calling tech support ?
Thanks!

What to do you mean when you say "the network doesn't recognize"? What error message are you getting?

Similar Messages

How to setup mail client in Data Integrator 11.7 to make use of mail_to()

How to setup mail client in Data Integrator 11.7 to make use of mail_to() function.
I am using mail_to() function in one of my job to know the status of source file. If source file is not ready, our DI job should fail and send mail notification with reason for failure.
But mail_to() function is not sending any mail. I guess I need to set up email client.
Any one please help to resolve this issue.
Thanks
Phani

From the DI documentation that comes with the installation:
To use this function, a mail client must be installed and running on the Job
Server computer that calls the function. The login account for the mail client
must have the same user name and password as the Data Integrator service.
The type of client varies by the operating system:
u2022 If the Job Server is on a computer running the Windows operating
system, then the mail client must comply with MAPI (message application
programming interface). In addition, the mail client must be configured as
the default mail client. For example, Microsoft Outlook is a MAPI-based
mail client.
If the Job Server is on a computer running the UNIX operating system,
then the mail client must be mailx-compliant.
So:
Mail client installed and configured and set as default
Mail client uses the same credentials as the job server service
Or use another function: smtp_to();
If still not working or you are not allowed to use an installed mailclient on your box, then try Blat: http://www.blat.net/

Hi I've recenty purchased a new imac time capsule airport express. I've set up a new network, rather than extended the current one. How do I change my new network to an extended one or create an extended network?

Hi I've recenty purchased a new imac + time capsule + airport express.
I've set up a new network, rather than extended the current one. How do I change my new network to an extended one or create an extended network?
Michael

detailed in terms of what focus?
here is a video guide about using the airport utility
http://www.youtube.com/watch?v=65Jv6m43eIE

How to setup Mail Server in Lion

I'm wondering how to setup the mail server if I have a website that is being hosted by a site like go daddy. I really have no IT experience and wanted this server to help my company get organized and on track. So far I have been able to get the VPN and File Sharing working. My next steps are the mail server and iCal. Thanks for the help it will be greatly appreicated!

Well, it depends heavily on what operating system you're using, what mail server you're trying to install, your network topology, etc. Realistically, this is a question that is probably better asked in a forum for whatever mail server you're trying to install...
Justin

How to setup Mail on iPhone and iPad so that thd inbox is identically as on my MacBook

Hi Guys
I have an own business plus private email accounts + my email account for my other job all installed on both my MacBook and my iPhone, and also on the iPad. In the beginning, everything was fine, but now each time I get an email, which I read and delete or put in the right folder, I have to delete it again on iPhone and on iPad.
How can i setup mail mail accounts so that if I read the email on for example the MacBook Mail, and put it in a folder, the email won't show up in the iPhone and iPad inbox? This really would save me a lot of time!
Thanks!
Bob

Hi carlos.latorre,
You can directly download your PDF files from Acrobat.com account using this link:https://cloud.acrobat.com/folder/3073b35e-9266-46b0-a2cb-18105ac3b878
Take a look at this screen shot.
Select the files you want to download to your iPhone and iPad and then click on 'Download' button.
Regards,
Florence

How to setup a Class B network with WRT54GX ver. 2

Hi all,
I bought a WRT54GX ver. 2 router. I wanna know how to setup the IP address say 128.1.50.136 with subnet mask 255.255.0.0 (Class B network)? By the way, 128.1.0.0 is my network zone.
If the router can't change, what should I do? Any other router support Class B network?
Thanks!

bcow wrote:
I did but it doesn't work. It seems don't have 255.255.0.0 to select.
would you state more clear of how to do it? Thanks!
It does not have that because it does not support it... the router runs on CLASS C only because it was designed and made for SOHO only... bussiness lines of Linksys or Cisco can do that....but not this router...
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

How to setup mail template in CPS ?

Dear Expert,
Now we're using with Redwood CPS version M33.19-48733 with alert function license.
We can setup mail alert in our CPS. When any job schedule was failed or cancel. It will send automatic mail alert to us. But it send with normal information. Example : Job name xxxx was failed.
Our requirement is we would like to send with some template. Example.
========================================
Dear Customer,
Your job name xxx was failed in this system.
Please check for your job.
Regards,
Admin CPS
========================================
How can we set up this request ?
Regards,
Somkeit

From the DI documentation that comes with the installation:
To use this function, a mail client must be installed and running on the Job
Server computer that calls the function. The login account for the mail client
must have the same user name and password as the Data Integrator service.
The type of client varies by the operating system:
u2022 If the Job Server is on a computer running the Windows operating
system, then the mail client must comply with MAPI (message application
programming interface). In addition, the mail client must be configured as
the default mail client. For example, Microsoft Outlook is a MAPI-based
mail client.
If the Job Server is on a computer running the UNIX operating system,
then the mail client must be mailx-compliant.
So:
Mail client installed and configured and set as default
Mail client uses the same credentials as the job server service
Or use another function: smtp_to();
If still not working or you are not allowed to use an installed mailclient on your box, then try Blat: http://www.blat.net/

How to setup a small office network

Hello,
I am looking to setup a small office network comprising 6 G4 macs (existing computers) that have been upgraded to the newest OS version. What is the best way to go about networking these computers together in terms of being able to share files, internet connection, access to peripherals and also implementing a firewall.
Any suggestions or help would be greatly appreciated.
Thank you

1, Get a cable internet ISP account; depending on your service you should be able to secure a 5Mbps down and 2Mbps up on the cable e.g. Cox or Comcast.
2. Get a good router. The mass market Linksys and Netgear routers aren't very good in terms of reliability. I use a ZyXEL P-330W router is the best I've ever seen. Its reliable and very efficient in terms of throughout. The Apple Airport Extreme is good.
3. Set up the router to support UPnP. This way all computers will be able to share iChatAV video conferencing. If you enabled "port forwarding" only one Mac would be able to use iChatAV video conferencing.
4. Set up your router for DHCP to dynamically issue Internet address to all your computers.
5. Setup the wireless router for encryption such as WPA. This will encrypt wireless communication.
6. Setup the wireless router for only your computers. You'll have to get the MAC/AirPort ID network addresses as expressed in terms of an xx:xx:xx:xx address. You can get this thru your Systems Preferences -> Network window -> AirPort (in the sidebar) -> Advanced button.
7. If you have Ethernet in your office then skip steps 5 and 6 above.
8. On each computer open up the System Preferences -> Sharing and check-off the File Sharing. Set your user access preferences appropriately.
9. Get a Network enabled All-in-one printer and setup Printer Sharing options. Hook-it up to your network and add your printer by clicking on the "+" sign in your "Print and Fax" Preferences.
10. Don't enable Apple Firewall on each Mac. The router will be the Firewall.
Ok. That's the short-hand.. plug it all in and go!

How to setup peer to peer network with Vista machine.

Hello,
I just got my very first Apple computer last week and I'd like to copy some files from my Dell PC with Vista Premium installed. I don't have a wireless network setup yet (hopefully soon), but I'd like to copy some files from my PC to my Mini. I was wondering if it were possible to network the two systems using just an ethernet cable between the two.
Might someone know how to set this up or refer me to a document that explains all the steps needed to accomplish this?
Thanks in advance,
Jeff

Apple have a page that talks you through doing this:
http://docs.info.apple.com/article.html?artnum=304721
Probably a good place to start.

How to setup Mail server in Oracle 10g?

Hi all,
I want to setup a mail server in my OS, can anyone give me the step by step procedure to setup a mail to send mails to all the users.
I would appreciate if anyone refer me any document.
Jafar

Well, it depends heavily on what operating system you're using, what mail server you're trying to install, your network topology, etc. Realistically, this is a question that is probably better asked in a forum for whatever mail server you're trying to install...
Justin

How to access mail on new iPhone

Just got a new iPhone, how do I access my email. It was working on my old iPhone.
Thanks

Just open mailbox and setup your email account to access yor emails..

How do I make a new network account visible to a client at login?

I have just installed a new Leopard Server machine. It is an Open Directory master and I have created a number of new accounts with network home folders. On my client machines I have identified that OD server using the Directory Utility program. Yet when I log in from any of my Leopard client machines I only see local accounts, not the network accounts.
What am I missing?
Ian.
--

Did you set up your accounts on the server to be mobile or network home accounts?
I believe they are network home accounts. For example, for the user fred I have a folder on the server hard disk called /Volumes/disk1/Users/fred, which I created as the home folder when I created the user account.
There is a folder called "fred" visible at /Network/Servers/penguin.example.com/Users/fred/ from the client computers.
DId you set your sharepoints up to be automount?
I believe so. In the above example the folder /Volumes/disk1/Users is marked as a share with "Enable automount" selected and marked "Use for User home folders".
Did you bind your computer in DIrectory Utility?
Well, on each of the client computers I have used the Directory Utility program to connect to the OD server. Does that constitute binding?
Is DNS resolving properly?
Definitely. I can ping all of the computers, including the new server, from any of the computers on the network.
I should have mentioned that I had done these things - sorry about that. Anyway, I'm stumped. Anything else to try?
Ian.
--

How to setup Proxy in new environment?

Hi All,
We have implemented a new ECC and PI environment. When we try to regenerate the Inbound proxy in ECC for a proxy message already defined in new PI Integration repository, we get the following error message:
Diagnosis
The object currently selected references objects from other namespaces. However, there are no proxy objects for these objects in the current system.
You cannot create proxy objects while editing the object currently selected for the following reasons:
Objects are possibly located in different packages to the object currently being edited
Objects are possibly subject to different naming conventions to the object currently being edited
Objects are possibly located in different software components and cannot be created or changed in this system
Procedure
Contact the development area responsible for these external namespaces and do the following:
Regenerate the objects concerned in the relevant original system
Transport the objects to this system
You can display the number of objects when you check this proxy: all entries in the check list after the entry "Objects to be changed from external namespaces".
Please advice what we need to do. This is the first time proxy is being setup in new environment...
Regards,
XIer
Edited by: XIer on Mar 27, 2008 2:16 AM

Check whether the interface you're trying to generate proxy for have any underlying basis components. If yes, make sure they're active in in the IR (and that the proxies refering to these basis software components are in the ECC box).
Regards,
Henrique.

How to Setup and activate new iphone 5 factory unlocked

Hi I have recently puchased new iphone 5 factory unlocked from Apple online store USA. now I am trying to setup and activate my phone on wifi in different country but I am unable to do that. My phone says
"Activation failed"
"Please dissconnect and insert a SIM Card in the iphone"
Do i really need a sim to activate my phone. cant i use my phone for browsing on wifi without sim ?
Plz help me
Regards
Adnan

"Do i really need a sim to activate my phone."
Yes.
"cant i use my phone for browsing on wifi without sim ?"
A new iphone will not do anything until you have activated with a carrier.

Show how to setup mail on iPad mini

Setup email on iPad mini

The procedure is the same as your iPhone.
Read this: Mail settings you might need from your email provider - Apple Support

How to setup mail on new network

Similar Messages

Maybe you are looking for