How to setup message type in existing distribution model?

hi,
how to setup (add) message type in existing distribution model?
thanks & regards
Ruban

Hi,
Please try these ...
1. Go to transaction BD64.
2. Click on Change button (F9).
3. Place the cursor to the corresponding model view.
4. Click on Add Message Type button (CTRL+F7).
5. Enter the corresponding Sender, Receiver and Message Type then click on continue button.
6. Click Save button (CTRL+S).
Regards,
Ferry Lianto

Similar Messages

Add a message type to a Distribution model dynamically (similar to BD64)

Hello,
I have a req. to add a message type to a dist. model at runtime & generate partner profiles for the same.
Are there any FM, Classes available which will help me in achieving this func.?
BR,
Suhas

Perhaps you need to re-think why you need to describe the process at one point as "Import" (from within the application) and at another as "Open" (in the Finder).
If it's "Import", that is, your application is *not* associated by default with the data, you could try and force it into the "Open With" list. I'm not sure how that would work out though, if there is no default 'open' action.
If it's "Open" you can use the standard way of associating document types with applications.

Message types for ALE distribution

Hi,
I am working on SRM 7.0. I need to copy the org structure from one client to another. For that I am using the ALE distribution model. Can anyone please let me know all the message types reqired for transferring the org structure.
Thanks,
Bhakti

Hi Masa,
Thanks alot for your help. The document is quite helpful if the org structure had to be mapped from HR. But, the org structure is to be mapped from another existing ERP. Kindly suggest if there is any document for such a transfer.
Also, I have found another way to transport the org structure. Hopefully that should work. Once I am done testing for the same, I will notify.
Thanks,
Bhakti

How to find message type by using message number and application area

Hi abapers,
I know the message number and application area , how to find messagwe type.
i.e weather it is error message or warning message.
MESSAGE NUMBER IS :219.
APLLICATION AREA IS : FS.
in which table i had to check.
i checked in t100 table , but i am unable to find message type.
please help me to solve this.
regards

hi,
go to se91
enter area and message number.
then click on display.
then go to utilities tab >> where used list or press shift + ctrl +f3
there list of program will show .
choose your program name
then u will get ur mesage infoemation by double click on ur program name
thanks
sachin

Too many recipients found for message type in the ALE model

Hello Friends,
Please help me in solving this error. I have a Outbound sales order confirmation ORDRSP .
In the distribution model i have defined the sender receiver and message type clearly...
But in va01 after creating sales order extras ->Output->Hearder --->Edit
Output type-- BA00
medium --ALE
Dispatch time : Send Immediately
I am getting a error -
Too many recipients found for message type ORDRSP in the ALE model
Message no. B1130
Diagnosis
In the ALE distribution customer model several recipient systems for IDOCs with message type ORDRSP and filter object type 'KUNNR' with value '100' have been modeled from this system, but only one recipient system is allowed.
Procedure
Please change the ALE distribution customer model so that it allows only one recipient system for the message from this system.
Please help me in solving this error.
Regards,
jeevan

Hi Jeevan,
In BD64, the said problem occurs, since the message type ORDRSP will be configured to different Logical System.
Since you are creating sales orders & Output type, system doesnt knows, to which Logical system, it has to be sent since the Message type exists more than once.
select Your respective Logical System where the Outbound Sales Order Confirmation ORDRSP has been created.
Under the node ORDRSP, add the filter group for Customer.
Double click the Filter group and add the respective Customer No.s to whom the Order confirmation needs to be sent.
Then create Sales Order Confirmation & Output type. Data will be passed(IDoc) to the respective Customer(where the customer no.) exist in the filter.
Hope it solves your Issues.
Regards,
Anbalagan.

IDoc Error: No recipient found for IDoc message type in the ALE model...

Hello Experts,
I just created an IDoc for purchase orders and when I try to test it after releasing
the PO, an error is shown in the processing log saying that there are no recipients
found for my message type of the IDoc. I refrenced it against a working IDoc but I might be
missing something.
Hope you can help me guys. Thank you and take care!

hi,
in bd64 ,goto change mode select ur distribution model and click add message type define ur logical systems and message type and save.
thn goto environment - partner profiles - f 8.it will show whether model is created or any errors.
then go back edit - model view - distribute.
reward points if hlpful.

How to create messages with parameters In ADF model.

In ADF model, How to create messages with parameters?

To Create messages in message bundles with parameters, perform the steps as given below
Scenario: To Create a message as "Department Name XXXXXXX is already existing "
Step#1: For the given entity object “DepartmentEO”, Go to “overview” tab and click “Business Rules” finger tab.
Step#2: Select “Entity Validators” in the list & click “+” to add a new entity level validation rule.
Step#3: Now go to “Failure Handling” tab, and click the Magnifier Icon.
Step#4: Now in the “Display Value” field, enter the message with flower-braces as below.
Department Name {department_name} is already existing
Step#5: Also modify the Key & Description fields as needed. And click “Save and Select” button.
Step#6: Now go to “Token Message Expressions” section, double-click the Expression field corresponding to "department_name" & give the relevant Attribute names say "DepartmentName"
Step#7: Now click “OK”.

How to apply ontology on the existing RDF model

Hi,
I am new to Semantic web technologies.I am facing following issue.
I have installed Oracle 11g with semantic support.
I have few tables which stores customer,products information. eg :CUSTOMER_MASTER,PRODUCT_MASTER.
Now used d2rq client and generated N-TRIPLE files by connecting to the above scheme i.e converted the tuples to triples generated RDF content.
I could store the RDF data into Oracle 11g using the jena APIs. I was successfull till this point.
Now , I have defined an ontology for the above entities using protege. I was able to store the model to Oracle 11g using Jena APIs.
But I am confused with following issues.
1. How can I apply my ontology definition to my existing RDF model.
i.e. - I have created a ontology definition MyOntology.owl and loaded into Oracle 11g name MyOntologyModel.
I already have another RDF model which got generated from the relational table i.e. CustomerRDFModel .
Now, how can I apply MyOntologyModel to CustomerRDFModel and execute meaningfull queries.
While defining the ontology, shall I use the same class names which are used in the CustomerRDFModel ? How can I link my ontology and RDF content ?
eg:- I have a entities such as CUSTOMER_MASTER and PRODUCT_MASTER .Now in my ontology, if I need to bring some ontology definitions , shall I use the same entity names while defining Ontology.
Otherwise, how we can apply ontology on existing relational tables ?
Is it not required to convert the tuples(relational data) to RDF data for running the semantic queries ?
Please provide me some pointers on these issues .
Thanks
Aneesh K

Let me explain it like this:
The triples (data) you automatically generated using D2RQ must conform to some ontology definition (lets use ontology schema in place of ontology definition for easier understanding). I believe D2RQ generates ontology schema/definition also, along with data. Please check once. But if it does not then it is your responsibility to either manually/automatically generate a ontology definition/schema that has the same class & property names (URIs) as what your data (generated thru D2RQ) has.
Once you have a ontology schema and ontology data (that conforms to our schema), you have two options to link them:
1) Load both schema and data to a single ontology model in oracle database.
2) Load them into separate models and while querying you can mention both the models in the query.
But I believe that the database does not do any kind of validation of data against schema in any of the above case (probably because that is what is intended in the W3C OWL specification - no distinction btwn data & schema) . But if you have schema in the database you can actually do a lot if inferencing (RDFS inferencing, OWL inferencing etc..)
Thanks,
Rajesh.
PS: All those Ontology pundits, correct me if I am wrong.
Edited by: rajesh narni on Jul 9, 2010 4:30 AM

How to set the filter object in distribution model

can any one pls help me

Hi,
Go to BD64 and select your message type which you want and double click on this message type.Now a popup will display and below this popup there is a pushbutton <i><b>Create filter group</b></i>.Press this pushbutton then you will get the all filter object in that message type here you will add filter values.
Before that you have chekc in BD59 tcode that is any filter object required is assigned to your message type or not if no filter object not assigned to you message type then you can add your required filter fields here.
Thanks,
shyla

When to add message type to distribution model

hi
i am bit confused on when to add a custom/std message type to distribution model. what are the conditions. is that always necessary to add the message type to distribution model.
thanks

[http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/add-message-type-in-ale-distribution-model-1192885]
[http://docs.sun.com/app/docs/doc/820-5014/ggcpd?a=view]
[http://publib.boulder.ibm.com/infocenter/wtxdoc/v8r2m0/index.jsp?topic=/com.ibm.websphere.dtx.packsapxi.doc/tasks/t_pack_sapxi_Create_a_Destination_Model_BD64.htm]

Distribution model. Create filters for custom message type.

Hello,
I have created a model view, and added a new message type (copy of HRMD_A). I want to add filters, but the system does not allow it. Do you know if I can only add filters to a standard message type, and not to a custom one?
Thank you,
Elena.

Thanks for your answer, but I think I didn't explain my question well.
I have created a message type ZHRMD_A, and a basic type ZHRMD_A07 (both copies of HRMD_A and HRMD_A07)
I am creating the distribution model, in transaction BD64.
I created the model view.
I inserted my messsage type.
Now I want to add filters to the message type in the distribution model. When I add a standard message type, I can see under the message type the text 'No filter set'. Then I double click this text, and I can add filters. When I add the custom message type, I don't see this text, and I have no option to add filters. That's why I think I cannot add filters to a custom message type.

ALE with BAPI; No recipient found for message type

We have to send sales activities from an ECC-system to CRM and tried to do this with message type SFADPSA and Idoc SFADPSA01.
When adding this message type to the distribution model (transaction BD64) we got the SAP-message to use a BAPI instead: IF1037SR with method RECEIVEPARTNERSALESACTIVITY. So we did.
To trigger the Idoc, we customized an output type, with transmission medium ALE, program RSNASTED and processing ALE_PROCESSING.
When processing the output type we get an error B1 129: "No recipient found for message type SFADPSA in the ALE model".
Analysing the error I found out following: during processing (RSNASTED, ALE_PROCESSING) function module MMODEL_INT_VALID_GET is called. This FM only looks into table TBD05, in which no entry for message type SFADPSA is found.
However, also function module BMODEL_INT_VALID_GET exist, searching table TBD06.
This table does contain an entry for the above BAPI and method and would not lead to an error message.
Obviously this last FM should be called, but this never happened...
Has anyone a clue?
Do we use the correct processing code?
Another message type to use could be SFADSACTIVITY, but this message type has no Idoc type assigned.

Hello Wolf,
This error message come while determing the distribution channel.
This error come from one of below includes. Can you please put a break point and swich update debugging on and check whether the program is populating reuqired parameters to determine the distribution model. by doing this you can understand what is going wrong....
LBDMOU17
PCHEAF01
PCITEF01
RBDSECOP
RBDSEGLM
if you are not able to check this let us know..
Regards
Naresh

How to create a data filter for BAPI used in a Distribution Model ?

I am trying to create IDOC's for a QM inspection plan via message type QPMK in ECC 6.0. When creating the new message type in the Distribution Model, it forced me to use a BAPI (MasterInspectionChar) rather that just the message as I have done in the past. In order to ensure that only IDOC's related to a specific plant and material type get sent out, I was trying to create a filter.
I am able to get into a 'Change Filter' dialog by double clicking 'No data filter set' under the node 'MasterInspectionChar.SaveReplica'. However, an attempt to highlight anything on this dialog and clicking button 'Create filter group' results in msg. 'Select node: Content-dependent parameter filtering'.
Online help led me in a different direction, one thread led me to believe I needed to create a table entry for the filter in table TBD16 via BD81 for later attachment to the BAPI in the Distribution Model. Before this, I created two Z* ALE Object Type records for plant and material type in table TBD11 via BD95 for what I thought would provide a lookup back in BD81 for creation of a new filter record, but these objects are not found. Per the help, I am also unclear as to whether I would need to set up Receiver determination or Parameter filtering, nor where to make this step in the configuration happen?
Can anyone point me back in the correct direction to get a data filter set up for this BAPI within the Distribution Model ?
Thanks - Mike

Just to clarify, what I am having trouble with is finding where exactly to plug in the name of the plant to be filtered? If using a message type such as MATMAS in a distribution model, it is very straight forward to navigate down from the 'Data filter active', and assign a value to whatever field you wish to filter via the 'List of Values'. But in this example, message type QPMK required use of the BAPI MasterInspectionChar, and therefore the different method in creating the filter.
I cannot find similar functionality when navigating the BAPI related row, for MasterInspectionChar. The 'Change Filter' dialog popup displays a row for 'Container' and then 3 more rows containing 'BAPI structure...'. Clicking the 'Attribute' checkbox on any of these rows sets 'Data filter active' as a node under the BAPI. Double clicking the 'Data filter active' brings me back into the same dialog, and selecting any row with an attempt at this point to create a filter results in the 'Select node: content-dependent parameter filtering' warning. Is this warning occuring because of missing configuration?
Thanks - Mike

Problem in Message Type in Distribution Model

I am trying to add a message type to a Distribution view(TCODE BD64). I am doing this on the R3 side. So it is asking for Message Type and it looks like I can't just type anything in there. Actually I am just trying to implement the starter kit mentioned by Arpit Seth(/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit). File to RFC scenario. as simple as that. For that I am using RFC BAPI_COMPANY_GETDETAIL. Now tell what message type I need to use

Hi Sonia,
If you are in change mode.
Then you need to create a model first.
Once you create the model you can add Message Type, you need to specify the sender & receiver.
Regards,
Sumit

How link customize IDOC message type with FM ?

Hi,
I have created new IDOC message type ZCOST and FM ZMASTERIDOC_CREATE_COST. (Outbound).
Please advise how link the message type and FM ? so everytime i am executing BD21 with message type ZCOST the program always calling FM ZMASTERIDOC_CREATE_COST to generate the IDOC.
Thank You and Best Regards
Fernand

HI,
You need to link Mssage type, IDOC type and the FM (also extension idoc type if exits) in TCODE: WE57 --> go to change mode
--> then new entries --> even you need to gove the direction inbound/outbound.
Also you need to create a outbound custom process code in WE41. and link the FM to the process code.
This process code shold be assigned to the partner profile in we20 in outbound parameters -> so you FM will be picked up qutomatically.
regards,
Nazeer
Edited by: N a z e e r on Jul 14, 2010 3:14 PM

How to setup message type in existing distribution model?

Similar Messages

Maybe you are looking for