How to setup multi-platform export ?

I have a FlashBuilder Burrito project created as a Mobile Flex App, and wondered if there's any quick easy way for it to be exported for mobile, web and desktop app? One of my biggest trends to learning Flex and play with Burrito was the supposed multi-platform capabaility... although I'm not seeing it in this case.
Is it, that I have to create a new Flex project, and cross merge my source code, and reapply differing User Interfaces? Or is it that this kind of feature is not available in the Beta release?
Apologies if this is sounding like a dumb 'fundamentals' question, but as I say, I'm new to Flex and I've not come across any answer here or Google...
Any help appreciated. Thanks
Stu

Thanks, I knew about the export release build part - but as you mention, it says it will only build to Android.... not web or desktop app as well.
(I know iOS- phone/pad is not available until release.)
I was wanting to know if there was anyway to publish to multiple platforms from my existing code at the same time now, but it's looking like it's because Burrito is in Beat dev still (?)

Similar Messages

How to setup Multi Reporting Currency by SubLedger in Oracle EBS 12.1.3

Hi,
I would like to ask about how to setup (steps) multi reporting currency by Subledger, by Balance in Oracle EBS R12.1.3
Thanks
fn

Hi;
Please see:
Reporting Currency Function With Subledger Option In Release 12 [ID 785385.1]
Hope it helps
Regard
Helios

How to setup multi DNS server resolution

I have a peculiar situation which I think may be applicable to others. I take my Macbook Pro to work. At work I have a Ethernet based LAN connection and a wireless connection.
The ethernet connection gets me access to company servers, but uses some crude proxies and limits what I can access on the net.
The wireless was setup by a tech to get around this and has a direct connection to the net, but no access to the company servers.
The best situation I have currently is to put the wireless connection first in the network setting sand use that unless I need a company server. Then I have to turn wireless off before accessing the server and turn it back on to access anything I cannot get through the company LAN.
I've been looking into configuring the Mac to enable me to have both on all the time. I've found that if I execute
route add 161.117.0.0/16 -inteface en0
Then any company server name I have already resolved will correctly route out through the eithernet rather than the wireless which solves the first part of the puzzle.
I've also tried to setup multiple DNS resolution by adding a /etc/resolvers/company.com.au file with the contents:
nameserver 161.117.219.153
nameserver 161.117.248.113
search company.com.au
search_order 1
I've then checked this with scutil --dns which shows
DNS configuration
resolver #1
search domain[0] : Wireless
nameserver[0] : 10.0.0.138
resolver #9
domain   : company.com.au
search domain[0] : company.com.au
nameserver[0] : 161.117.219.153
nameserver[1] : 161.117.248.113
order    : 1
DNS configuration (for scoped queries)
resolver #1
search domain[0] : Wireless
nameserver[0] : 10.0.0.138
if_index : 5 (en1)
flags    : Scoped
resolver #2
search domain[0] : company.com.au
nameserver[0] : 161.117.219.153
nameserver[1] : 161.117.248.113
if_index : 4 (en0)
flags    : Scoped
But I still cannot get DNS resolution working for the company servers. Dig is no help because it's doco says that it only uses the /etc/resolv.conf file. Unfortunately documentation on setting up multi DNS resolution is practically nil and I've not been able to find any examples on the net. Just a few postings saying to use /etc/resolvers and very little doco in man pages.
Has anyone else managed to get this working?

Following blogposts will get you started:
Automatic Provisioning of a Virtual BizTalk Environment
http://blog.codit.eu/post/2013/06/07/Windows-Azure-IaaS-%E2%80%93-Automatic-provisioning-of-a-virtual-BizTalk-environment.aspx
One Click BizTalk Multi Server Environment Azure Provisioning
http://blog.brauwers.nl/2013/07/23/one-click-biztalk-multi-server-environment-azure-provisioning-and-full-configuration/
Build an Azure IAAS Biztalk Single Server or Domain
http://www.biztalkgurus.com/biztalk_server/biztalk_blogs/b/biztalk/archive/2014/06/12/build-an-azure-iaas-biztalk-single-server-or-domain-win-100-or-other-great-prizes.aspx
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu

How to setup multi node installation

Hi all,
I have successfully installed Oracle E-Business Suite 11.5.10 in a single node.
But, I would like to get some suggestions on How to perform the multinode installation in which all the application tier servers in independent nodes?
If the nodes are placed in different places geographically, how can I move all these nodes in to a single network? Is this possible?
Please guide me.
Thanking in advance
Rameshkumar

1. Is it right if I assumed that we must check that
box if we want to install apps tier in more than one
server so that if we only want to install apps tier
in only one server then we don't need to check that
option? Or we better check it even no matter how many
server we installed apps tier into? You only need to check that box if you intend to used a shared application tier filesystem for a multi-node installation. If you are only going to have one app tier server, you don't need to check the box. If you plan on multiple apps tiers, each with its own copy of the application tier file system, you also don't need to check that box.
2. If I still uncheck that option will there be any
problem such as in backup & restore, clone, testing
activity, etc?No, should not be any problem at all.
3. When we created user for each db tier and apps
tier, what will be better, create the same user for
both tiers or differentiate user for each db tier and
apps tier? I'm thinking of using same user for both
tiers to avoid privilege problem later on.
I'd recommend the same user for application tier files on all nodes in the system, and a different user for database-tier files. For example, in our system the database software (RDBMS ORACLE_HOME) and database datafiles are owned by 'oracle', and the EBS application files (APPL_TOP, forms and web server, etc) are owned by a user called 'applprod' (though of course you should choose a user name that makes sense in your environment.
4. Can we start clone process in db tier and apps tier >paralel in multinode environment or still start clone >process in db tier first then apps tier?Still need to do the db tier first, since 'adcfgclone.pl appsTier' will want to talk to a database. :-)
Regards,
John P.
Message was edited by:
jpiwowar (forgot to answer the 4th question the first time, whoops)

How to setup AJAX in java platform

Hi,
firstly, i want to say sorry if i post in the wrong forum.
I'm using netBeans to develop web application. Does anyone know how can i setup AJAX in my current platform? I can't really get the good example and article on how to setup it. Can anyone please provide me the relevent link?
Please....
Thanks a lot.

Hi,
Thanks for your reply.
Actually i found the example from the web (http://today.java.net/lpt/a/219). But when i try to run it. There's nothing happened. I found that there's no value return in this line DWRUtil.getValue("text").
I thought that i need setup the platform to make it runable. Do you have any idea on why it unable to return the value from DWRUtil.getValue("text")??
Thanks

TMS - step-by-step example on how to setup and test TMS

I have installed ECC6 (AS ABAP) on NW2004s on Oracle, Windows platform. This is a 1-system landscape.
I would like to work hands-on with Transport Management System(TMS). I have read the theory part.
I need a document that shows how to setup a test TMS (transport route, package e.t.c.) , create a test transport, export and import the test transport in a 1-system landscape?
I'm looking for a simple test case that will help me understand TMS.
Thanks

Hi,
For single system landscape..
Go 000, DDIC ... STMS--> here it will ask for domain controller -- give self domain ---> Domain controller has been assigned .
Now again goto STMS> System overview>SAP SYSTEM >Create ->Virtual system- give name V<SID>
till this point your domain controller is created and virtual system is created .Next our aim is to setup STMS
again goto STMS>transport routes> change > configuration>statndard configuration ---> select second option (development and productino System ) because here your dev system will your own system and virtual system would be production system .
---> pop up will come -> give DEV - SID and Productino SID- it willl automatically create the route .
Save this and exit.
This way We can set single system landscape.
Thanks and Regards,
Arun Rathour

How to setup a default direction for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
Thanks.

This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

How do I save my exported doc in order to send it as an email attachment?

how do I save my exported doc in order to send it as an email attachment?

Plug your ipod in and pull up itunes. Then click on the device name in the left hand side. Click the restore option. When it goes all the way through and says "your device has been restored and is restarting, once it restarts you want to choose the option that says "setup as a new device"

Oracle 10g to sql server 2005 - how to setup

Hi,
I have been searching on how to setup a connection from oracle 10g to sql server 2005 and i have to admit i am struggling a bit.
I have read about Heterogeneous Services and Database Gateway but we really dont want to fork for licence fees so it looks like i have to investigate HS.
My environment is:
10gR2 Linux 32 bit
SQL Server 2005 32bit.
Would someone be able to provide me with a list of steps to help me get this setup?
Thanks.
B

Hi,
If you don't want to pay for any licence fees then you will have to use the 11g Database Gateway for ODBC (DG4ODBC) which is included in your RDBMS license.
You need to use the 11g versions because all previous gateway versions have been desupported for some time. The latest version is 11.2.0.3 which can be downloaded from My Oracle Support as -
Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER
and download -
p10404530_112030_platform_5of7.zip
- this is the Gateway media pack and has everything needed for a standalone gateway install.
This version is certified the following RDBMS versions - 10.1.0.5 + RDBMS patch 5965763, 10.2.0.3 + RDBMS patch 5965763, 10.2.0.4, 10.2.0.5, all 11.1 versions, all 11.2 versions.
You have 2 choices about where you can install it and it would be better to install the gateway into a new and separate ORACLE_HOME from any existing Oracle installs -
1. On the Linux 32-bit platform where the RDBMS is running. If you install it here you will need to supply a third party ODBC driver. The only free one I am aware of is from FreeTDS but there may be others. There can be problems with the FreeTDS so another one may be preferable but these usually require a license fee.
See this note in My Oracle Support -
How to Configure DG4ODBC on Linux x86 32bit or on HP-UX RISC (DG4ODBC 11.1 only) to Connect to Non-Oracle Databases post install (Doc ID 466228.1)
2. Install DG4ODBC on the Windows platform where SQL*Server is running. If you install on Windows then you will be able to use the Microsoft SQL*Server ODBC driver which should already be installed. See this note on My Oracle Support -
How to Setup DG4ODBC (Oracle Database Gateway for ODBC) on Windows 32bit (Doc ID 466225.1)
If you don't have access to My Oracle Support you will need to contact someone in your organisation to access the notes for you or review the gateway documentation -
http://www.oracle.com/pls/db112/homepage
Regards,
Mike

How to setup project property in 9iJdeveloper?

i don't know how to setup the project property, although i have experience with jdev3.1.
i want to run a helloworld.jsp.
the project name is myProject.
the files i have
helloworld.jsp
helloworldBean.java
helloworldProvider.java
the data "hello world" is retrived from a database table.
i use NT to build and test these files, and put them on Linux environment later.
the Linux server runs 9iAS, i will put the jsp file in $j2ee_home/default-web-app/myTest, and put the servlet classes in $j2ee_home/default-web-app/WEB-INF/classes/myTest.
could any one give me detail explaination on
1.where to put the three files(same directory or not)?
2.how to setup the project property on my NT machine? (such as Defaul Package, javaSourcePath, HTML root Diretory, output directory,Libraries, J2ee properties, modelers properties, and other properties necessary to be modified. )

Mazel tov !!!
Finally found it!
So simple.
nothing to do with rendering.
Steve you deserve a big hug for all your hard work in trying to help me, and I feel like I owe you big time, however the solution was so simple and provided by ted smith, on the playback screen one right clicks and changes the playback quality to highest, and the quality is 100% crystal clear.
Thank you all for your help.
btw who knows how to export an mp3 from a video?
Thanks
simon

How to setup QoS for IP/Mac Address WRVS4400N

I need some help setting up QoS for two Cisco/Linksys devivces on my network.
Network devices are Comcast SB6120 modem into WRVS4400n (v2.0.2.1 firmware) that divides into one 24 port gigabit Netgear unmanaged switch, 1 port into AT&T Cisco Microcell, 1 port to HP Officejet 7700 wired printer. Unmanaged switch has approx 10 devices attached (including another 8 port unmanaged gigabit switch). 3 static leases are defined for the network for three devices (HP OJ 7700 printer, Cisco/Linksys PAP2 VOIP adapter, windows home server v1. DHCP is handled by WRVS4400n. Comcast service provides 12mbps of service upstream, 4mbps downstream.
Need to setup QoS for AT&T Microcell and PAP2 VOIP adapter. The real issue that I can't figure out how to configure is IP based priority access. I can do rate control for an IP address but can't figure out how to specify priority control for an IP.
Here are my the current config questions:
1. Bandwidth management page: For the microcell device plugged into port 1, do i set the default CoS to 4 or 1?
2. Bandwidth management page: Should the bandwidth management type be set to priority? I assume yes since I need to define the UDP/TCP ports for priority. The major issues here are
a) one of the ports the Microcell uses is secure https (TCP 443) which is could also be used by any other internet device.
b) can't specify priority for the PAP2, since it's behind the unmanaged 24 port switch
3. QoS setup page: Do I need just 2 queues (one for the port ID for the Microcell and one for the IP address of the Linksys adapter)?
4. QoS setup page: I assume I need to define DSCP for the unmanaged switch but not sure how to tie a queue to an IP address
4. QoS setup page: Shoud priority 0 be set for the most important queue (microcell) and the priority 1 CoS be for the VOIP adapter? Again, not sure about how to define priority by IP address.
5. DSCP setup page: As far as I can find, there's no documentation on how to setup this page.

That's what I do. I keep it simple, one calendar, one set of contacts.
iCloud is really the simplest way to go, as it will sync your (eventual) single Contacts and Calendar across all your devices.
I would:
Figure out which single calendar (in Calendar.app) and contacts (in Contacts.app) that you want to keep.
I'd make a backup of each one. For example,
in Contacts, File > Export... > Contacts Archive...
in Calendar, File > Export... > Calendar Archive...
Make a backup of the other calendar events and contacts that you want to save.
delete all the contacts and calendars from your phones and your iPad.
add the contacts and events from the backups to the single calendar in Calendar.app and your contacts in Contacts.app on your iMac. There is probably some way to export the contacts and events you are adding, and then combine them, but you could also just add them manually.
Then when you configure all your devices for iCloud, they will be all synced automatically.
Message was edited by: arthur

How to setup MSI Matrix Display on MSI Gaming Notebooks.

We made two guides: How to setup MSI Matrix Display (Multi Monintor Setup)
GT60/GT70:
http://faenl.msi.com/index.php?dir=Notebook/Guides/&file=How%20to%20setup%20MSI%20Matrix%20Display%20on%20MSI%20GT60%2C%20GT70%20Notebooks.pdf
GS60/GS70/GE60/GE70:
http://faenl.msi.com/index.php?dir=Notebook/Guides/&file=How%20to%20setup%20MSI%20Matrix%20Display%20on%20MSI%20GS60%2C%20GS70%2C%20GE60%2C%20GE70%20Notebooks.pdf
I hope this helps.

Thanks for msi fans to share this picture, it's also using MSI Matrix display technology ^^
Quote from: marylee on 04-March-15, 16:40:02
Now I can use three screens on my laptop!!! Super cool!!

New multi-platform Mobile Flex app development

I thought I'd post this note to encourage anyone that hasn't tried multi-platform Mobile Flex application development yet. Inside 4 weeks, I managed to get this application up on both the Android and Apple app stores:
http://itunes.com/apps/trontextfx
http://market.android.com/details?id=air.com.uifx.trontext
It's a pretty simply app, but it demos a number of features:
Multi-DPI scaling (splash screen and background)
Multi-touch gestures
Colour Picker dialog that scales based on available screen space
Portrait/Landscape orientation
Pre-rendered icons (for iOS)
Works for both tablets and mobile phones
Some challenges I ran into:
The DPI differences between tablets and mobiles - the tablet version's imagesare scaled slightly. It would be nice if the code didn't have to do "isTablet" checks
The scaling of filter effects (e.g. glow) had to be handled manually. Though this could be due to the way the text is scaled, rather than using a projection to zoom in & out...
The animation for showing/hiding the controls got confused if the screen was rotated at the same time.
Making the toolbar icons more-touchable by adding transparent pixels to the edges, so that the image size matched the desired hotspot size (45px).

may be i know what happen, i try to draw shape on the view,not on the Image, it work.
i think may be my image does not show on the view, but i have set the visible=true, it is stilll can't see the Image,
how to make the Image can see in the view?

How should implement multi-thread in single-threaded Operating system using

How should implement multi-thread in single-threaded Operating system using java?
Java supports "Multi-threading".Is there is any way run the multiple threads (Implementing multi threading) using java in a Single-threaded Operating system (That is the operating system does not support for multi-threading).

Previous questions from OP suggest they are using J2ME, so the question might be possible.
806437 wrote:
How should implement multi-thread in single-threaded Operating system using java?
What is the actual question/problem?
A java app doesn't do threads or not do threads. It uses classes. The VM does threads.
So if you have a platform that does not have threads and you want to support the thread class then the VM, not a java app, must provide some pseudo mechanism, such as green threads, to support that.
If your question is about java code and not the VM then you must build a task engine and insure that the tasks are of short enough duration that it is an effective use for your system.

LR5 multi-platform backup strategy

> PC (2010):
SSD: Intel SSD 120Gb (Installed apps: Windows 7, CS6 Master Collection, Lightroom 5)
HDD1: 1TB (Lightroom gallery 1)
HDD2: 1TB (Lightroom gallery 2)
HDD3: Backup 1 (3TB SDD + HDD1 + HDD3 + OS X)
> rMBP (2013): i5 2.6 GHz/16GB/512GB (Lightroom temporary Gallery)
OS X: (200GB): LR5, Windows 7 (300GB): CS6, LR5
> External Western Digital HDDs (current backup strategy):
WD1 2TB – Backup 2 (copy of Backup 1)
WD2 1TB – Backup 3 (copy of Lightroom gallery 1, 2)
Hi guys, I have recently purchased Lightroom 5 and would appreciate some advice on how to set up a backup strategy prior to syncing all my images with it. Currently, above PC is my primary machine (HDD1, HDD2 with image galleries and HDD3 is primary backup). I also have a mac where OS X and Windows 7 (bootcamp) both have LR5 installed. Images stored on the laptop is temporary while I am out and about which eventually gets moved back to HDD1/HDD2 (with backups in HDD3, WD1). I also a spare 1TB external HDD that I would like to utilize to exclusively store Lightroom files.
My queries are as follows:
1) What's the best way to move my laptop's (OS X and bootcamp) temporary LR5 files to my primary PC (HDD1, HDD2)? Can I do this over home network easily?
2) Best way to sync all Lightroom files (from HDD1 and HDD2) with 1TB external HDD? This is so that I have a copy of my images on the go and can sync the laptop to external drive on longer trips.
3) As my images (along with other data) gets backed up to HDD3 automatically, should I exclude this drive from sycing with LR5?
4) Is there any backup software I can use to simplify this backup process?
Cheers!

it is interesting topic!
how do you solve this?
user-friendly and multi-platform-friendly
backup strategy for LR and PS is maybe interesting for everybody
(I am looking for help for about 5? main LR install and backup configurations ... )

How to setup multi-platform export ?

Similar Messages

Maybe you are looking for