How to setup multicam editing in fcpx, how to setup multicam editing in fcpx

Does anyone know how to setup multicam editing in final cut pro x

ask the Mothership
http://help.apple.com/finalcutpro/mac/10.0.3/#ver23c76439

Similar Messages

In version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

in version 10.1 fcpx how do I edit in proxy, then when I am finished share with optimize footage? It was easy in 10.9 version, but I can't figure this out in 10.1, please help.

The switch is in the upper right of the viewer.

HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

Welcome!
Last question first, as we need to know what operating system that the Mac is using.
If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
Two possible solutions on the power cord
ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
If you don't already have a Setup Guide.....look here:
AirPort Extreme Base Station Setup Guide v4.2 (Manual)

FCPX, How do I reconnect a video file that has been modified or over written?

FCPX, How do I reconnect a video file that has been modified or over written?
As an animator, I am constantly modifying and overwriting movies files that have already been imported into the Final Cut time line. In FCP7, I could easily modify and update movie files and have those changes appear in the timeline without the need to reimport and re-edit those clips, but FCPX seems to lose it's connection with any modified or overwritten file, making all the editing work I've done to these files worthless.
Does anyone know of a way to reconnect to a modified or overwritten file? Because, this one single issue makes FCPX completely worthless to me.
Andy Murdock

If you import the new clip , select it and drag over the old offline clip , you can choose from the menu ...

How to install B2B Apps locally - Pre Dev settings -setup dev environment

Hi All
Need your help: to customize CRM WebChannel B2B App, I just installed NW developer workspace. The next step I guess is to setup / install B2B Apps locally on my pc. Can some one guide me how to? Any documentation / advise about how to setup development environment?
Thank you very much in advance, Jin

Hello Jin,
1. NetWeaver Java Application Server
Do you already have the SAP NW Java Application server? (J2EE server) if not get that from Service Market Place /swdc.
Download --> SAP Installations and Upgrades --> Entry by Application
Group --> SAP NetWeaver --> SAP NETWEAVER
and install the Developer Edition of the version of your choice. You may need to get them from Solution Manager or seek your Basis team's help
2 Deploy E-Commerce application components and configure
After this installation of NW Java AS developer edition, you can deploy the E-Commerce Java applications. The SCA files required are listed in the enhancement guide. They include files required in step 4 also. You can find them here in /swdc
Support Packages and Patches --> SAP Application Components --> SAP CRM --> SAP CRM 2007 --> Entry by Component --> CRM Application Server Java
You may need to get them from Solution Manager or seek your Basis team's help
3 Install NWDS (if not already done)
It is possible it is already done as a part of the NW Developer Workplace installation.
4 Setup enhancement project
Use the existing NWDI and import the tracks locally to your PC / laptop for making enhancements. Refer: Extension Guide and other documents to create tracks in NWDI.

Here's how to do ALV (OO) with dynamic fcat, int table and editable data

Hi everybody
Here's a more useful approach to ALV grid with OO using dynamic table, data NOT from DDIC, dynamic FCAT and how to get changed lines from the grid when ENTER key is pressed.
It's really not too dificult but I think this is more useful than the ever present SFLIGHT methods from the demos.
This also defines a subclass of cl_gui_alv_grid so you can access the protected attributes / methods of that class.
You don't need to add the class via SE24 -- done fron this ABAP.
When you run it click Edit for the first time.
After editing data press ENTER and the break point should bring you into the relevant method.
Code developed on NW2004S trial version but also works on rel 6.40 on a "Real" system.
The code should work without any changes on any system >=6.40.
All you need to do is to create a blank screen 100 via SE51 with a custom container on it called CCONTAINER1.
The rest of the code can just be uploaded into your system using the SE38 upload facility.
When running the program click on the EDIT button to enable the edit functionality of the grid.
Change your data and when you press ENTER you should get the break-point where you can see the original table and changed rows.
This program is actually quite general as it covers Dynamic tables, building a dynamic fcat where your table fields are NOT in the DDIC, intercepting the ENTER key via using an event, and accessing the protected attributes of the cl_gui_alv_grid by defining a subclass of this class in the abap.
I've seen various questions relating to all these functions but none in my view ever answers the questions in a simple manner. I hope this simple program will answer all these and show how using OO ALV is actually quite easy and people shouldn't be scared of using OO.
Have fun and award points if useful.
Cheers
Jimbo.
<b>PROGRAM zdynfieldcat.
Simple test of dynamic ITAB with user defined (not ddic) fields
Build dynamic fcat
use ALV grid to display and edit.
*When edit mode set to 1 toolbar gives possibility of adding and
*deleting rows.
*Define subclass of cl_gui_alv_grid so we can use protected attributes
*and methods.
Add event handler to intercept user entering data and pressing the
*ENTER key.
When enter key is pressed get actual value of NEW table (all rows)
rather than just the changed data.
*use new RTTI functionality to retrieve internal table structure
*details.
Create a blank screen 100 with a custom container called CCONTAINER1.
James Hawthorne
include <icon>.
define any old internal structure NOT in DDIC
types: begin of s_elements,
       anyfield1(20) type c,
       anyfield2(20) type c,
       anyfield3(20) type c,
       anyfield4(20) type c,
       anyfield5(11) type n,
       end of s_elements.
types: lt_rows type lvc_t_roid.
Note new RTTI functionality allows field detail retrieval
at runtime for dynamic tables.
data:   wa_element type s_elements ,
        wa_data type s_elements,
        c_index type sy-index,
        c_dec2 type s_elements-anyfield5,
        wa_it_fldcat type lvc_s_fcat,
        it_fldcat type lvc_t_fcat,
        lr_rtti_struc TYPE REF TO cl_abap_structdescr,    "RTTI
        lt_comp TYPE cl_abap_structdescr=>component_table,"RTTI
        ls_comp LIKE LINE OF lt_comp,                     "RTTI
        zog like line of lr_rtti_struc->components,      "RTTI
        struct_grid_lset type lvc_s_layo,
        l_valid type c,
        new_table type ref to data.
field-symbols: <dyn_table> type standard table,
               <actual_tab> type standard table,
               <fs1> type ANY,
               <FS2> TYPE TABLE.
data: grid_container1 type ref to cl_gui_custom_container.
class lcl_grid_event_receiver definition deferred.
data: g_event_receiver type ref to lcl_grid_event_receiver.
data: ls_modcell type LVC_S_MODI,
      stab type ref to data,
      sdog type s_elements.      .
class lcl_grid_event_receiver definition.
public section.
    methods:
    handle_data_changed
         for event data_changed of cl_gui_alv_grid
             importing er_data_changed,
       toolbar for event toolbar of cl_gui_alv_grid
                 importing e_object
                           e_interactive,
      user_command for event user_command of cl_gui_alv_grid
                 importing e_ucomm.
endclass.
*implementation of Grid event-handler class
class lcl_grid_event_receiver implementation.
method handle_data_changed.
code whatever required after data entry.
various possibilites here as you can get back Cell(s) changed
columns or the entire updated table.
Data validation is also possible here.
perform check_data using er_data_changed.
endmethod.
Method for handling all creation/modification calls to the toolbar
method toolbar.
    data : ls_toolbar type stb_button.
Define Custom Button in the toolbar
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EDIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Edit' to ls_toolbar-text.
    move icon_change_text to ls_toolbar-icon.
    move 'Click2Edit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'UPDA' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Update' to ls_toolbar-text.
    move icon_system_save to ls_toolbar-icon.
    move 'Click2Update' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
    clear ls_toolbar.
    move 0 to ls_toolbar-butn_type.
    move 'EXIT' to ls_toolbar-function.
    move space to ls_toolbar-disabled.
    move 'Exit' to ls_toolbar-text.
    move icon_system_end to ls_toolbar-icon.
    move 'Click2Exit' to ls_toolbar-quickinfo.
    append ls_toolbar to e_object->mt_toolbar.
endmethod.
method user_command.
    case e_ucomm .
      when 'EDIT'.          "From Tool bar
        perform set_input.
         perform init_grid.
      when 'UPDA'.          "From Tool bar
        perform refresh_disp.
        perform update_table.
      when 'EXIT'.          "From Tool bar
        leave program.
    endcase.
endmethod.
endclass.
class zcltest definition inheriting from cl_gui_alv_grid.
define this as a subclass so we can access the protected attributes
of the superclass cl_gui_alv_grid
public section.
methods: constructor, disp_tab.
endclass.
need this now to instantiate object
as we are using subclass rather than the main cl_gui_alv_grid.
class zcltest implementation.
METHOD constructor.
CALL METHOD super->constructor
        exporting i_appl_events = 'X'
           i_parent = grid_container1.
endmethod.
method disp_tab.
FIELD-SYMBOLS: <outtab> TYPE STANDARD TABLE.
break-point 1.
mt_outtab is the data table held as a protected attribute
in class cl_gui_alv_grid.
ASSIGN me->mt_outtab->* TO <outtab>. "Original data
do whatever you want with <outtab>
contains data BEFORE changes each time.
Note that NEW (Changed) table has been obtained already by
call to form check_data USING P_ER_DATA_CHANGED
         TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Entered data is in table defined by <fs2>
In this method you can compare original and changed data.
Easier than messing around with individual cells.
do what you want with data in <fs2> validate / update / merge etc
endmethod.
endclass.
data :
    ok_code like sy-ucomm,
    save_ok like sy-ucomm,
    i4 type int4,
Container Object [grid_container]
now created via method constructor
in the subclass zcltest.
Control Object [grid]
grid1 type ref to zcltest,
Event-Handler Object [grid_handler]
grid_handler type ref to lcl_grid_event_receiver.
start-of-selection.
call screen 100.
module status_0100 output.
now display it as grid
if grid_container1 is initial.
    create object grid_container1
        exporting
          container_name = 'CCONTAINER1'.
    create object grid1.
     break-point 1.
    create object grid_handler.
    set handler:
       grid_handler->user_command for grid1,
       grid_handler->toolbar for grid1,
       grid_handler->handle_data_changed for grid1.
perform create_dynamic_fcat.
perform create_dynamic_itab.
perform populate_dynamic_itab.
perform init_grid.
perform register_enter_event.
set off ready for input initially
i4 = 0.
call method grid1->set_ready_for_input
         exporting
           i_ready_for_input = i4.
endif.
endmodule.
module user_command_0100 input.
*PAI not needed in OO ALV anymore as User Commands are handled as events
*in method user_command.
*we can also get control if the Data entered and the ENTER is pressed by
*raising an event.
Control then returns to method handle_data_changed.
endmodule.
form create_dynamic_fcat.
get structure of our user table for building field catalog
Use the RTTI functionality
lr_rtti_struc ?= cl_abap_structdescr=>describe_by_data( wa_data ).
Build field catalog just use basic data here
colour specific columns as well
loop at lr_rtti_struc->components into zog.
c_index = c_index + 1.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = zog-name .
wa_it_fldcat-datatype = zog-type_kind.
wa_it_fldcat-inttype =   zog-type_kind.
wa_it_fldcat-intlen =    zog-length.
wa_it_fldcat-decimals = zog-decimals.
wa_it_fldcat-lowercase = 'X'.
if c_index eq 2.
wa_it_fldcat-emphasize = 'C411'.
     endif.
    if c_index eq 3.
wa_it_fldcat-emphasize = 'C511'.
   endif.
append wa_it_fldcat to it_fldcat .
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to field sysmbol.
Use dynamic field catalog just built.
call method cl_alv_table_create=>create_dynamic_table
             exporting
                it_fieldcatalog = it_fldcat
             importing
                ep_table        = new_table.
assign new_table->* to <dyn_table>.
endform.
form populate_dynamic_itab.
load up a line of the dynamic table
c_dec2 = c_dec2 + 11.
wa_element-anyfield1 = 'Tabbies'.
wa_element-anyfield2 = 'ger.shepards'.
wa_element-anyfield3 = 'White mice'.
wa_element-anyfield4 = 'Any old text'.
wa_element-anyfield5 = c_dec2.
append wa_element to <dyn_table>.
endform.
form check_data USING P_ER_DATA_CHANGED
           TYPE REF TO CL_ALV_CHANGED_DATA_PROTOCOL.
Get altered data back
ASSIGN   p_er_data_changed->mp_mod_rows TO <FS1>.
stab =       p_er_data_changed->mp_mod_rows.
ASSIGN STAB->* TO <FS2>.
LOOP AT <FS2> INTO sdog.
ALV grid display with altered data is now in <fs2>.
do any extra processing you want here
endloop.
now display new table
call method grid1->disp_tab.
endform.
form exit_program.
call method grid_container1->free.
call method cl_gui_cfw=>flush.
leave program.
endform.
form refresh_disp.
call method grid1->refresh_table_display.
endform.
form update_table.
The dynamic table here is the changed table read from the grid
after user has changed it
Data can be saved to DB or whatever.
loop at <dyn_table> into wa_element.
do what you want with the data here
endloop.
switch off edit mode again for next function
i4 = 0.
call method grid1->set_ready_for_input
      exporting
          i_ready_for_input = i4.
endform.
form set_input.
i4 = 1.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form switch_input.
if i4 = 1.
i4 = 0.
else.
i4 = 1.
endif.
call method grid1->set_ready_for_input
     exporting
       i_ready_for_input = i4.
endform.
form init_grid.
Enabling the grid to edit mode,
     struct_grid_lset-edit = 'X'. "To enable editing in ALV
     struct_grid_lset-grid_title = 'Jimbos Test'.
     call method grid1->set_table_for_first_display
       exporting
         is_layout           = struct_grid_lset
       changing
         it_outtab             = <dyn_table>
         it_fieldcatalog       = it_fldcat.
endform.
form register_enter_event.
call method grid1->register_edit_event
               exporting
                  i_event_id = cl_gui_alv_grid=>mc_evt_enter.
Instantiate the event or it won't work.
create object g_event_receiver.
set handler g_event_receiver->handle_data_changed for grid1.
endform.</b>

Hi there
IE7 doesn't give me the add new page option and I get 404 error when trying to access the "How to contribute" section.
I'll load up Firefox later (this browser usually works when IE7 doesn't always work properly).
I'll copy the stuff to the wiki when I've got the browser sorted out.
Cheers
jimbp

How to import MXF files to Final Cut Pro with smooth editing

Summary: Follow this tutorial to learn how to import and edit MXF files in Final Cut Pro by converting MTS to FCP native format.
If you have a Panasonic P2, Canon XF or Sony XDCAM series camcorder,
you may be familiar with Material eXchange Format (MXF). Though MXF is a
great video format to record high-definition videos, it is not easy to
use in that they are not natively supported by most NLE systems like
Final Cut Pro. In order to import MXF to FCP for editing, the easy workaround is to transcode MXF files to FCP compatible video formats.
Along with some help from a top MXF Converter, it can be done. To
help those who wanna edit MXF files in FCP without problems, here I
share with you a simple guide on how to convert MXF files to edit in
Final Cut Pro 6/7 or FCP X.
First of all, downloading the App- Brorsoft MXF Converter for Mac
Overall, the program is a professional yet easy-to-use MXF Converter
on Mac (Mavericks included) which can not only convert XF100, Canon
C300, XF105 and XF305, Panasonic P2 recorded MXF files, but also provide
simple video editing functions for you. The MXF to FCP Converter not
only can convert MXF to ProRes for FCP, but also can transcode MXF
videos for editing in Avid MC, Adobe Premiere Pro, iMovie, FCE, etc.
Just download it and follow the tutorial below to get the work done.
Transcoding (P2) MXF files to ProRes for Final Cut Pro 6/7/X
1. Import MXF files to the converter
Launch the best MXF to FCP Converter, and then click the “add files” button to browse and import MXF videos from your camcorder or hard drive.
2. Select FCP editable format
Click the Format bar, and move mouse cursor to choose “Final Cut Pro > Apple ProRes 422 (*.mov)” as output format.
Tips:
a. Settings- click to set video
resolution(1920×1080/1440×1080/1280×720/720×480), bitrate (from 1Mbps to
20Mbps), frame rate (24p/30p)
b. Editor (next to “Add” icon)- click to set deinterlace, trim, crop, add effect, attach subtitles, etc
3. Start transcoding MXF video to FCP
Click “Convert” button to start converting MXF files to Apple ProRes
MOV for FCP 6/7/X under Mac OS. Once the MXF to ProRes 422 conversion
is done, you can transfer MXF footage into Final Cut Pro (X) for editing
smoothly on Mac with ease.
Source:How to import MXF files to Final Cut Pro with smooth editing
[quote] jacknjchn.tumblr.com/post/76914947404/cant-import-mxf-footage-to-fcp-transcoding-mxf-to-fcp [/quote]

You may refer to this step by step guide on how to convert MXF to Final Cut Pro more supported Apple ProRes or DV at http://www.idealshare.net/imovie-fcp/mxf-final-cut-pro.html
It also applies to convert MXF to other video or audio format. It even applies to convert other videos like AVCHD, MOD, TOD, AVI, and MPEG etc to FCP format.

How do I return an e-library book on adobe digital editions?

How do I return an e-library book on adobe digital editions?

You should ask in the Digital Editions forum,
http://forums.adobe.com/community/adobe_digital_editions
This is the Reader one.

Hi i have a question, I'm trying to back up my iPhone to iTunes but it says restore from backup or setup up as new device. if i setup as new device will everything be deleted? if yes then how would i back it up without anything being deleted

Hi i have a question, I'm trying to back up my iPhone to iTunes but it says restore from backup or setup up as new device. if i setup as new device will everything be deleted? if yes then how would i back it up without anything being deleted

Following is a link to instructions on how to backup (either via iTunes and via iCloud) http://support.apple.com/kb/HT1766

How to get Movies from iTunes to iPad (Not setup on computer)

I have a movie in iTunes that I want to transfer to an iPad.
The iPad was not setup on my current machine (or not setup using a computer at all, I can't recall), so when I connect, it asks to restore from my last iPhone backup, or setup as new. The iPad is only backed up on iCloud.
Thoughts?
Thanks in advance.

If you purchased the TV. shows from iTunes, they are compatible with the iPad and there is no reason why they shouldn't work. Did you try syncing them to the iPad from iTunes on your computer?
This is explains how to sync movies to your device.
http://ipad.about.com/od/iPad_Guide/ss/How-To-Sync-An-iPad-With-iTunes-Music-Mov ies-Apps_4.htm
In iTunes 11, in order to see the device in the left sidebar, go to View>Show Sidebar from the iTunes menu at the top of the screen - if the sidebar isn't already visible.

I have upgraded to Pages 5.0.1 and now I cannot print or pass along "comments" in the text of a document. I previously was able to convert the Pages document, with comments, to a "Word" document so that others could view the edited text. How do I do that?

I have upgraded to Pages 5.0.1 and now I cannot print or pass along "comments" in the text of a document. I previously was able to convert the Pages document, with comments, to a "Word" document so that others could view the edited text. How do I do that?

When you installed Pages v5, it automatically moved the older Pages ’09 v4.3 into /Applications/iWork '09 folder. If you want normal comment interoperability, you are advised to resume using the older version of Pages. Newer, is certainly not better with Pages v5.

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

How to make VIP flag in transaction code fpp2 as non editable

Hi everyone,
Please guide me about:
How to make VIP flag in T Code FPP2 as non editable only for some particular users?
Is there any authorization object exists for this flag in FPP2 transaction?
Actually there are many users who have authorization of transaction fpp2. But we want only some particular users should have authorization of making changes to this flag.
Please guide with your valuable replies.
Thanks and Regards

Hi...MP Vashishth
try to creat an Authorization Management ... in customizing...
Cross-Application Components --> SAP Business Partner --> Business Partner --> Basic Settings --> Authorization Management
Creat an Grup..and others steps...!
and when finish clic on Generate and Assin Authorization !!!
I Hope it Help !
regards
Andre Frugulhetti
Edited by: Andre Frugulhetti on Sep 22, 2009 9:38 PM
Edited by: Andre Frugulhetti on Sep 22, 2009 9:39 PM

I have a lot of HD video on my hard drive that I eventually want to edit in iMovie, but just don't have the time now. It is clogging up the computer, though. How do I take the Hd clips off Mac for later editing?

I have a lot of HD video on my hard drive that I eventually want to edit in iMovie, but just don't have the time now. It is clogging up the computer, though. How do I take the Hd clips off Mac for later editing?

See "Storage drive" here
Most commonly used backup methods
Th problem with HD video is it needs a fast external interface, so you should pick a external drive that uses the fastest interface your computer has to offer.
Performance rank fastest to slowest is
Thunderbolt, USB3, (newer Mac's)
Firewire 800, USB 2, Firewire 400, USB 1 (older Mac's)
Newer Windows PC's have USB3, older one's USB 2,1.
You need to format the drive if it comes FAT which a lot do, as FAT has a 4GB file size limit, so this won't work with large HD video files.
So if your going to use the drive only with a Mac, then head to Utlities > Disk Utility and format it Options: GUID Format: OS X Extended Journaled. (select the drive makers name and click Partition tab)
If your going to use the external drive with a PC, take it to the oldest PC you have and right click and format exFAT.
If you have a Windows XP machine and there is no exFAT, it can be downloaded for free from Microsoft.
Drives, partitions, formatting w/Mac's + PC's

In IPhoto or IPad, when I edit a photo in an existing album, the photo is removed and placed in a new album with only edited photos. How do I keep it in or get it back to its original album?

When using IPhoto for IPad, can I move photos from one album to another? For instance, when I edit a photo in an existing album, the photo is removed and placed in a new album with other edited photos. How do I keep it in or move it back to its original album?

That will depend on the kind of album your photo is in.
Most albums in iPhoto are created automatic by the way you are using and editing your photos, see: http://help.apple.com/iphoto/ipad/1.1/#blnkb9b1e2a
When you edit your photo, the edited copy is added to the automatic "edited" album and the view switches to he edited album. But the photo should stay in its original album - do you see something different? Only if you want the edited photo in the camera roll and the photo strea as well, you have to save the edited copy to the camera roll again after editing, otherwise the camera roll will show the original and not the edted version.

I have Adobe Photoshop and Adobe Lightroom on my MacBook Pro laptop. I bought an iMac and I'd like to move my installations to the larger display desktop for editing purposes. How can I go about transferring them?

I have Adobe Photoshop and Adobe Lightroom on my MacBook Pro laptop. I bought an iMac and I'd like to move my installations to the larger display desktop for editing purposes. How can I go about transferring them?

I have the same question. It seems that Adobe is almost impossible to contact (I ended up here at the forums to ask the same question).
I will never buy another Adobe product again if I can get another program to replace it. If this is customer service then it is NON EXISTENT!
I notice that your question has not been answered and why should you have to get the information from a forum? I know of no other company that makes you do this for simple product information.
NOT HAPPY with this version of arrogant customer service (nor am I happy about renting Photoshop products into the future - it is just a money grab in my opinion). I will be voting with my feet and going elsewhere in future.

How to setup multicam editing in fcpx, how to setup multicam editing in fcpx

Similar Messages

Maybe you are looking for