How to setup Multiple calendar in 7.9.6 OBIA

Friends, Could some one please explain me what this 'Multiple Calendar' option is, in 7.9.6. There is not much Information in Config guide with this regard.
My Question is, does 'Multiple Calendar option' means 7.9.6 supports different calendars but one at a time or does it support more than one calendar at a time in the application.
Where I'm coming from is, our source is EBS and some Business users want OBIA calendar to be same as EBS so that they can see Adjustment Periods as well..but on the other side they also want Weekly Analysis..which is not present in EBS (our EBS is configured with 445 calendar with Adjustments...so lowest is periods) ..so not sure how to go about this.
is there is a possibility of using EBS Sourced Claendar( Enterprise) as well as another 445 calendar which will give us week level analysis capabilities? Lets say it allows different calendars at a time..then how does it work?..does it pre-aggregates for different calendars?..please explain.
Any help regarding this will be highly appreciated.
Thanks
Edited by: Madhu.Hosadurga on 23-Sep-2009 03:49

hey madhu,
try this forum here: Business Intelligence Applications
cheers, rnm.

Similar Messages

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

How to Merge Multiple Calendars?

Somehow I have managed to end up with 11 different iCloud calendars.   I would like to merge them to one or two calendars. I tried deleting the calendar but then I get a message saying if I delete the calendar, all of the events associated with that calendar will be deleted, which I don't want to do. Suggestions?
I think that as a result of the multiple calendars, I have multiple holidays showing up on my calendar. For example, St. Patricks days shows up twice. This clogs up my calendar with unnecessary events. How to I reduce the holidays to one?

Thanks for the response, but it now has created a bigger problem. I was able to follow your instructions on two of the calendars and it worked well. However, on the third calendar, in importing the exporting ics file into the calendar I want to keep I get the following error:
"The server responded with an error. The event "xxx event" was rejected by "iCloud" because it already exists".
I then get three options:
1) Ignore
2) Try Again (The same error message occurs)
3) Revert to Server (I have no idea what this means - but when I click it, nothing seems to happen)
There doesn't seem to be a way to get out of this import activity and error messages. I have to Force Quit the program to stop. I have tried restarting the computer and the same thing occurs. Now I can't use iCal (although if I go into my iCloud calendar on Safari - that works).
I suppose I could continue to click on Ignore and eventually it would go through all of the duplicate entries. However, there is probably 10 to 15 years of entries.   There could thousands if not tens of thousands of entries.
Any suggestions?   Maybe I will sit down for a long movie and click on "Ignore" several thousand times and that will solve the problem!

How do setup multiple send and receive domain on single virtual ironport?

HI all
how do i setup multiple send and receive domain on single virtual ironport?
Daemien

Please use the admin guide to assist you for setup/configuration:
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-0/user_guide/ESA_8-0-1_User_Guide.pdf
On the VESA - the Recipient Access Table (RAT) will control which domains your appliance accepts for.
AsyncOS uses a Recipient Access Table (RAT) for each public listener to manage accept and reject actions for recipient addresses. Recipent addresses include these:
•Domains
•Email addresses
•Groups of email addresses
This is covered in detail in the "Overview of Accepting or Rejecting Connections Based on the Recipient’s Address" section.
Please see the "Configuring the Gateway to Receive Email" section for configuration of appliance for domains.
Please see the "Defining Which Hosts Are Allowed to Connect Using the Host Access Table (HAT)" section for configuration of appliance for sending.
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!)

How to setup multiple Apple ID's on Apple TV home sharing?

I have an Apple TV and a Mac with mavericks.. My roommate also has a Mac. We both want to be able to access our home sharing videos on the Apple TV. I figured out how to have multiple accounts for iTunes (rentals etc) but can't seem to do it with home sharing? Anyone out there know if it is possible? I don't like to use mirroring because it can be slow when watching movies.
Thanks!

Thanks for your help! I don't mind switching between them.. How do I authorize both on the home sharing ID? When my roommate goes to "computers" it tells her to turn on home sharing on my computer (with my ID).. Even if I changed the iTunes account over to hers..
Thanks again!

How to setup multiple Exchange accounts in Mail with the same username/password

Okay didn't see a place to ask a Mail question so I am placing this here.
I work for a helpdesk that requires me to monitor 4 different email accounts throughout the day. They are all Exchange accounts. The first one setups just fine but when I go to setup the others I get a message that states that the username and password are in use for the other account. Is there any way to setup multiple Exchange account when using the same LDAP creds for all the accounts?

Csound1,
I need to add a second Exchange account to my MBP using Mail. Both accounts are with Rackspace, but each email address is unique (i.e., two different domain names). When I use Preferences to attempt to add the second account, it recognizes the new credentials, finds the server and autopopulates the necessary address information. But, as soon as I click "Done" after setting which functions are active on the account (mail, cal, contacts, etc.), the screen shows only my original Exchange account. The new one is not added, yet there is no error message saying that it can't be added. Any idea what is going on? Shouldn't Mail be able to have multiple Exchange accounts, even if they are hosted via the same Rackspace server (in this case: connect.emailsrvr.com)?
Many thanks,
Wally
MBPR with Mavericks, Exchange 2012, Mac Mail

How to Setup Fiscal Calendars in Oracle BI Applications through DAC

Hi,
I m new to OBI thing.
I need to Setup Finscal calendar for "enterprise calendar using an Oracle EBS source system" and i got some martial but it is not helping out.
Kindly help me out on this issue. ASAP.
thanks in-advance
Edited by: 862383 on May 30, 2011 5:37 AM
Edited by: 862383 on May 30, 2011 5:38 AM

Thanks alot Mahesh Jayashan. I checked on following tables the DATA for year 2011 didnot exists it only contains for Previous Years and Months.
1- W_MCAL_PERIOD_D
2- W_MCAL_QTR_D
3- W_MCAL_YEAR_D
4- W_MCAL_CONTEXT_G
FOR TEST basses I Manually inserted Data for 2011 to W_MCAL_YEAR_D Table so data was shown on Dashboard for Year but i wasn't able to See for 2011 Months cause i didn't Manually inserted data in other tables.
Thanks man
chreeez
Edited by: 862383 on May 30, 2011 10:19 AM

How to publish multiple calendars into .mac?

There doesn't seem to be an option to publish multiple calendars to .mac. Is ther ea way that I can have all my calendars in one ical (.mac) view? I don't want to have multiple ical pages online.
thanks

There is no way to maintain separate source calendars on a Macintosh desktop or portable machine and publish a single, unified calendar using .Mac or a WebDAV server. It simply does not work that way.

How to Create Multiple Calendar Exceptions Which Occasionally Coincide

Ok so here's my situation
I have a group of schedules that currently have technical work and routine meetings and I am working in Project Standard 2010. I am not a fan of including meetings in technical schedules especially the recurring variety that represent informal tag-ups.
However, the team that is working the actual schedule has a significant portion of their work day captured by meetings. They want to be able to resource level, but they have to also be able to show the impact of their meeting obligations on their
ability to complete technical work.
So originally I was going to have these meetings entered as recurring events in the schedule; their periodicities were various. Some meetings were daily, some weekly, some monthly. But it became clear to me that this approach was going to become
unsustainable. With schedules that extend out a full calendar year, the daily and weekly meetings in particular became voluminous numbering in the thousands; in some cases representing 2/3 of all the schedule activities.
This makes timely tacking, updating, and statusing of these schedules un-achievable. I searched on the web and was given a clever suggestion: to create a resource calendar with recurring exceptions that represented meeting obligations for a resource.
I liked the idea but there was a problem. When I was testing the idea I wanted to see what would happen if a resource had multiple exceptions (representing multiple meetings) that coincided on the same day. Would Project recognize all of the
exceptions? So I created a resource named "Bob" and gave him
-a daily exception with a work day defined from 9:00-12:00 and 1:00-5:00 (to represent an 8:00 hourly meeting)
-a weekly exception with a work day defined from 8:00-12:00 and 1:00-4:00 (to represent a 4:00 hourly meeting)
-a monthly exception with a work day defined from 8:00-11:00 and 1:00-5:00 (to represent an 11:00 hourly meeting)
I ensured that the weekly and monthly exceptions happened on Mondays, and then I found a Monday were all 3 exceptions would be in effect. I schedule an activity to begin on the date, and then applied Bob to that activity. Then I went to the Resource
Usage view to Bob's hours, and instead of reflecting that Bob could only do 5 hours of work, it showed that Bob could do 7 hours of work.
It appeared that Project 2010 would only honor one exception at a time, and it appeared to do it in a hierarchy... first daily exceptions, then monthly exceptions, then weekly exceptions. Is that simply how it works in Project 2010? Can only
one exception be honored at a time? And if there are coinciding exceptions, does Project 2010 start with the daily exception first?

Guillaume,
Most people who have familiarity with scheduling agree with John, you, and myself; that the attempt to schedule, track,
status, and update routine meetings is probably ill-advised. I thought about doing something a long the lines of what you are suggesting (if for no other reason because it would make my life easier) to just reduce their percentage availability.
I may ultimately present that also as an alternative. My solution right now is to create exceptions to the
exception. Meaning: If I have a daily, weekly, and monthly exception, then I consider my daily meeting to be "The Exception" (because it has the highest frequency of occurrence), and my weekly and monthly meetings are exceptions to "The Exception". On
the days when a weekly and/or monthly meeting coincide with a daily meeting, I just add all of their outages together and create an exception to "The Exception" on that day. Theoretically this should work, I was just hoping for a more elegant solution.
I was hoping someone would say, "oh yeah, you just go to options and select 'Merge Exceptions' and you're good to go".

How to setup multiple content servers on one host

Hi,
We have setup 2 ECC 6.0 systems on one host ECC DEV and ECC QAS. Windows 2003 Server 64bit
We want to setup 2 standalone Content Servers (MaxDB). One contentserver pointing to ECC DEV and one to ECC QAS. Containing its own content.
Problem is that I was not able to set up 2 content servers on one host because in ISS i could only create one default webservice during installation.
To my opinion it must be possible to setup 2 standalone content servers on one host, question is how?
Can anyone help me how to proceed?
Many Thanks!
Best regards,
Jacco Raymakers.

Hi Jacco
You cannot Configure Two Content Servers on IIS( One Sigle Hardware).
As this Content Server you have configured can be used by both ECC DEV and ECC QAS.
There is no need of two content servers.Same Contentent server can be used by ECC DEV and ECC QAS.
Configure Content Repository and Content category diferrent for ECC DEV and ECC QAS.
I hope I have answered your query.Please let me know if helpfull.
With Regards
Mangesh Pande

How to setup multiple email accounts on one apple device It syncs to the rest of my apple devices?

I have a Macbook pro (10.8.2), iPad 4 (6.0.1), and iPhone 5 (6.0.1).
I have multiple email accounts set up on my iPhone:
3X Work
1X personal
1X School
They use Gmail and Microsoft exchange.
Is it possible to have all these accounts automatically created on my ipad and Macbook without typing in all info again?
Heres a visual:
I hope this makes it a little more clear.
I'm sure in the time it took me to type this, I could've manually added all the accounts to the devices lol
Oh, and iCloud > Mail is enabled on all devices.
Thanks for any and all help!

Your post is a bit open ended....
First thing - You need to decide if you want to use virtual domains or not.
If
     [email protected]
     [email protected]
     [email protected]
all should be separate mailboxes, then you need virtual domains.
If those 3 addresses can all go to the same mailbox, then you don't.
If you don't need virtual domains, then don't use them... things are simpler without that feature.
If thats the case, in the domain name field in Mail service, enter your primary domain.
You'll then need to enter your other domains via command line.
First, check your mail domain setting with:
sudo serveradmin settings mail:postfix:mydomain
Here is how you enter more than one domain:
- Quit the Server app
- Issue this with your domains between the quotes
sudo serveradmin settings mail:postfix:mydomain = "domain1.com, domain2.com"
- Restart postfix to activate your change
sudo postfix reload
If you open the Server app, you will notice both domains are now listed.

How to setup multiple daq lists on a ecu with ecu mc toolkit?

Has anyone had the pleasure of setting up multiple DAQ lists on a ECU?
I am using ECU MC Addon for Labview 2011. I can successfully setup a single DAQ list and read the data correctly. This method uses DAQ list mode to initilize instead of polling, it really cuts down on CAN traffic.
I dont have my VI on this PC but it basically is ECU Connect > ECU DAQ List Initilize (sets sample rate and channel list) > ECU Transmit DAQ List to ECU > Start DAQ List > LOOP{ ECU Read }
I need to create a second DAQ list to sample at a different speed. Any ideas?
Thanks,
Ben
Solved!
Go to Solution.

My revised VI is:
... > ECU Connect > ECU DAQ List Initilize (sets sample rate and channel list) > ECU DAQ List Initialize #2 (sets sample rate and channel list) > 2 Parallel Loops of ECU Read
The ECU DAQ Initialize or the ECU Read VI's appear to transmit the DAQ list to the ECM, so I removed those VIs. The ECU appears to also start transmitting the channels without a need for the ECU DAQ Start.
FYI, the "ECU Transmit DAQ List to ECU" was "MC DAQ Start Stop .vi" with the mode set to "transmit daq list to ecu".
Its running great, I am able to run this on a cRIO & 985x or a USB-8473. Now I am just working on setting up TDMS data logging.

Start to finish, how to setup shared calendar on 2 iphones...

I need to share a work calendar with my boss. We both have an iPhone, I am getting conflicting information on how to do this. Do I need to create a new gmail or yahoo, also when will the calendar update? If I add something will it automatically update on his end as well? Does the push work under 3G or wifi?
So confused, please help.
Jennifer

I log into icloud.com with a computer's browser. In the Calendar page, click the calendars button. There you can designate which calendars to make sharable.

How to setup Multiple report layouts based on parameter selection

I'm trying to create a report that will be based on the parameter values a user select. There will be 3 different layouts for the report.
Customer
Salesperson
Category
If the user selects one of the three a different layout will be displayed.
This is probably a simple solution but my Reports 6i skills are a little rusty.
Your advise would be appreciated.

Ok so you have a parameter form, and some parameters. In the data model, you can put your 3 queries. In the layout, as Ino said, put all 3 frames that you could possibly have.
The way I would use to choose which query to use is below. Others may have other methods, but I like this.
Ok lets say you have query A,B,C for simplicity. You have one parameter (P_PARAM1) on the form, and the user can choose A,B or C. Based on the parameter, you choose which query to use.
In query A, you would add this line to the where statement:
and :P_PARAM1 = 'A' You add the same lines to queries B and C, but change the letter obviously. So if the user enters A, it will only run query A because that was the parameter selected.
Now for the layout, click on the frame that corresponds with group/query A. You would click F11 or launch the PL/SQL editor, and add the following format trigger (or something similar).
function F_GRP_A return boolean is
begin
IF :P_PARAM1 = 'A' then
return (TRUE);
ELSE
return (FALSE);
END IF;
end;Ok - then add that same logic to Frame B and C, and based on the parameter it will hide or show the frame.
Hope that helps - thats a basic way to do what you're looking for!

HT204053 How to setup multiple Apple devices sharing Icloud and app store but still have different apple id for each?

Our family now has 7 devices, Ipad, Ipad mini, itouch. I am not sure if I am setting them up correctly to share Icloud and app's but to each have there own device name and apple id for mail, messageing and facetime.

Thekidiuse2b wrote:
Our family now has 7 devices, Ipad, Ipad mini, itouch. I am not sure if I am setting them up correctly to share Icloud and app's but to each have there own device name and apple id for mail, messageing and facetime.
As randers4 says, use separate AppleIDs for iCloud and iMessage accounts. You cannot "share iCloud" and have separate mail, messaging and facetime. To get those, you need to use separate AppleIDs to each create your own iCloud account and your own iMessage account.
You can share apps and other purchased content by having a common AppleID used in the iTunes and App store.

How to setup Multiple calendar in 7.9.6 OBIA

Similar Messages

Maybe you are looking for