How to setup my airport for music streaming

Hi all
I would like to use my iPhone and or iPad to stream music from Pandora and Spotify to my 5.1 (Wired) Speakers.
This question is similiar to this thread https://discussions.apple.com/thread/4153687 however i wanted some clarity and thought best to start a new discussion before pulling my hair out doing this the wrong way.
I have an unused Airport Express basestation (A1408) My current home setup is as follows:
Modem Router: (Netgear DGND3700) N600 Wireless ADSL2+ Dual band Gigabit
Home Theatre Computer: Windows 7 (Cat6 LAN Ethernet connection) NO LAN port
AV Reciever: (Onkyo TX-SR309)
5.1 Speakers: Wired connection to AV Receiver (NOT Airplay capable)
Laptop: Windows 7 (Cat6 LAN Ethernet connection)
My question is how to setup the airport, i understand it can be used to enable airplay streaming of music over the existing WiFi network, as these music streaming apps download and play music concurrently i would not want to have to switch between to two seperate WiFi networks. Should i plug the airport into the HTPC? I would need to purchase a LAN Splitter as the only LAN socket is already taken up with my cat6 connection. OR would i plug it directly into the modem/router? This second option is prefereable.
I have attached an image of my setup below. Any advice would be great, Regards Steve
[URL=http://s1293.photobucket.com/user/steve7677/media/homesetup_zps63eaf61c.jpg.html][IMG]http://i1293.photobucket.com/albums/b599/steve7677/homesetup_zps63eaf61c.jpg[/IMG][/URL]

Still slightly confused, with the link you provided i chose scenario 2. All the other secanrios instructed i connect the airport express to my home stereo or powered speakers. As i dont have an aiport express only an airport extreme there is no audio jack and cannot connect it to the stereo/speakers.
option 2: Connecting to an existing Wi-Fi network as part of a roaming network
Ensure that the AirPort base station Ethernet cables are connected as above
I have done this and conected it via ethernet cat6 to the modem/router
Launch AirPort Utility 6.1. The Assistant will automatically configure the Roaming network
Im using windows 7 and cannot find this version of aiport utility, only 5.6.1 - The message comes up: Aiport utility was unable to find any airport wireless device. I am running this utility on my win7 HTPC (which is connected to my modem/router via cat6 LAN) The airport light is blinkng amber.
would you reccommend a hard reset of the airport? or can you provide a link for AirPort Utility 6.1.?
Regards

Similar Messages

  • How to setup the Airport Extreme for PSP?

    Can anyone tell me how to setup the Airport Extreme for PSP? I have been searching the Discussions but none of the posting seems to explain detail enough. A step by step guide would be very appreciated. Thanks.
    PowerBook G4   Mac OS X (10.4.3)  

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to setup the airport extreme for window xp

    How to setup the airport extreme for window xp

    Sorry, I forgot to mention a few points:
    1) I don't have the Airport Extreme base station;
    2) My PowerBook is connect to the internet thru wired connection with the Built-in Ethernet;
    3) The Airport is turned on, but my PSP's scan cannot locate the PowerBook at all (while it find someone else's network)
    So, I wonder if I can just connect my PSP to the built-in Airport in the PowerBook directly. So that I can have internet access on my PSP.

  • How to setup the RV120W for quickvpn

    Hello,
    The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
    Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
    Thanks for any help

    User Guides for thee rv120W are here:
    http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
    http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
    and theres some more stuff over on my site:
    http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

  • How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

    How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
    I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
    I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
    Below are the Windows 8.1 client IP Configuration
    C:\Windows\system32>ipconfig
    Windows IP Configuration
    Wireless LAN adapter Local Area Connection* 3:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Wireless LAN adapter Wi-Fi:
       Connection-specific DNS Suffix  . : home
       Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
       IPv4 Address. . . . . . . . . . . : 192.168.1.5
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 192.168.1.1
    Tunnel adapter isatap.home:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : home
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
       Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
       Default Gateway . . . . . . . . . :
    Tunnel adapter iphttpsinterface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
       Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
       Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
       Default Gateway . . . . . . . . . :
    Below are the IPConfiguration details for Direct Access server
    C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
    PsExec v1.98 - Execute processes remotely
    Copyright (C) 2001-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    Windows IP Configuration
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
       Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
       IPv4 Address. . . . . . . . . . . : 10.192.1.25
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.192.1.1
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
       Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
       Default Gateway . . . . . . . . . :
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter IPHTTPSInterface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
       Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
       Default Gateway . . . . . . . . . :
    ipconfig exited on MURA01 with error code 0.
    Below are the IPCONFIG Details for SCCM Server:
    C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
    PsExec v1.98 - Execute processes remotely
    Copyright (C) 2001-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    Windows IP Configuration
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
       IPv4 Address. . . . . . . . . . . : 10.192.1.30
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.192.1.1
    Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    ipconfig exited on sccm01 with error code 0.
    What will be the IPV6 values to configure boundary?

    Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • How to setup SSL cert for SharePoint apps in a three tier farm with nlb

    I am having trouble understanding how to setup the SSL certificate on SharePoint apps or in general its configuration

    Please check the below thread..
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/53465d30-10b2-48c9-9541-5ade738156b4/how-to-setup-ssl-cert-for-apps
    Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
    Mahesh

  • How to setup Data guard for SAP database?

    Can someone please tell me how to setup data guard for SAP databases?
    Thanks,
    Abhi

    Hi Abhi,
    have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
    14
    Oracle Data Guard
    You can use "Physical Standby".
    You cannot use "Logical Standby".
    You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
    You can use Data Guard Broker.
    You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    Maximum Protection causes the primary database to terminate if problems occur in the standby database.
    And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
    Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
    regards
    Kay

  • SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?

    Hello IDM-experts,
    where can my customer find information about
    SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
    Customer situation description:
    The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
    SSO access to the Abap systems via the SAPGui. See screenshot as an example.
    Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
    this or if it is possible via SAP IDM 7.2.
    You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
    Kind regards,
    Daniela

    Do you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
    If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
    Thanks
    Tim

  • Airport Express for music streaming, but not Internet?

    I currently connect my PowerMac G5 to the Internet via a direct connection. How do I setup the A/E to stream music from my PowerMac G5 (Airport equipped), without disrupting the existing Ethernet connection?

    If you want your G5 to be on the Internet AND stream music at the same time, the AirPort Express (AX) must be connected to your Internet source. The G5 can not use the Ethernet connection for Internet and the AirPort connection for streaming music at the same time.
    If you have a wired router but do not have a wireless router, you could connect both the G5 and AX to the wired router.
    If you do not have a router of any kind (other than the AX), you could connect AX to the ISP connection and then have the G5 wirelessly connect to the AX.
    OR you could connect a wireless router to the ISP connection and then have the G5 and AX wirelessly connect to the router. Alternatively the G5 could be connected to the wireless router via Ethernet.

  • How to setup a KDC for Kerberos Authentication

    Hi,
    I am new to Kerberos. I am trying to execute the sample codes on Sun site but i am not understanding how to setup a KDC.
    Please help me.
    Regards.

    Hi Alexander,
    create the proxyauth.txt file in the roor directory of you MI Client installation and add the following paramters to the text file:
    MobileEngine.Sync.Proxyuser= Username for Proxyserver
    MobileEngine.Sync.Proxypw=Password for Proxyserver
    Regards
    Tahran

  • How to setup Anonymous TP for Immediate ACK for HL7

    All,
    Can someone give me steps to setup Anonymous TP for Immediate ACK for HL7?
    Dipal

    Ramesh,
    I follow the concept, I am not quite sure about the steps. I am outlining the steps as per my understanding correct me If i am wrong.
    - update existing TP "A" for ex to remove business action for ack.
    - update exiting TP "A" for ex to disable FA
    - Create Anonymous TP with business action Generic Ack and validation off.
    - Set oracle.tip.adapter.b2b.defaultTP = Anonymous in tip.properties
    oracle.tip.adapter.b2b.hl7.singleDC=true
    oracle.tip.adapter.b2b.hl7.genericMessageType=ACK
    oracle.tip.adapter.b2b.hl7.immediateAck=default
    Would this be it? or am I missing any steps?
    I am still not quite sure how would b2b know to respond to incoming message from TP "A" and send the MSH.10 value in ACK and datetime format we need.
    Please let me know.
    Dipal

  • How to setup separate rington for each contacts?

    Will someone point me to a tutorial or show me how to setup separate ring-tone for each contacts?

    http://support.apple.com/kb/HT1413
    Assign a ringtone to a contact
    From Phone, tap Contacts and choose a contact. Tap Ringtone and choose a ringtone. When that person calls, you hear that ringtone.

  • Can anyone tell how to setup audit trials for opm

    HI,
    how to setup audit trials function available in sys admin for OPM modules.
    can any one provide steps to hav audit trials.

    Does the jaxp direcory have a jaxp.jar?
    Add jaxp.jar to Classpath.

  • ECXpert3.5- How to setup HTTP-SSL for xml protocol

    Hi,
    We are using ECXpert3.5 on Solaris box. One of our Trading Partner want to communicate through HTTP-SSL and we are doing XML/EDI mapping. Could you guide us what steps we need to take care to implement this.
    How the external system will talk to ECXpert for transferring files.(We need the syntax for the URL). Could you suggest how to setup the HTTP SSL for XML protocol to receive xml files from remote system.
    Thanks in advance for your help!
    Regards,
    Ravi.

    Hi,
    We are using ECXpert3.5 on Solaris box. One of our Trading Partner want to communicate through HTTP-SSL and we are doing XML/EDI mapping. Could you guide us what steps we need to take care to implement this.
    How the external system will talk to ECXpert for transferring files.(We need the syntax for the URL). Could you suggest how to setup the HTTP SSL for XML protocol to receive xml files from remote system.
    Thanks in advance for your help!
    Regards,
    Ravi.

  • Alternatives/Work Arounds for Music Streaming

    I am looking to buy an Airport Express to stream music from my mac (connected through Airport Extreme) to a stereo system. The problem is I would like be able to listen to Internet radio stations that play through Flash in my browser as well as iTunes music. Are there any similar products or work arounds with AE which would allow me to stream all audio through the device?
    Thanks.

    Yes. Check out Rogue Amoeba's AirFoil.

Maybe you are looking for

  • Authorization issue during Jump

    Hi all, I am faced with an authorization issue when I am jumping from a BW report into an ABAP report in R/3. The particular BW report is built on a Multiprovider and when I jump to the R/3 report it displays a message saying that I have no authoriza

  • Grouping data issue

    Hi friends, I am struck on a issue for which i am trying to find a solution. The issue is i have a select statement which returns me the data like below. The first column is the date column, the second and third column represent the count based on th

  • InDesign CC - hiccup or bug?

    I hope I can explain this ok - I have completed a 62 page catalogue and all is ok (I am no expert, but I have been using InDesign for a couple of years). Suddenly, after trying to create a pdf to print the catalogue out for proof reading by others, n

  • The back light of my nokia won't turn off

    I had my Nokia in my shirt pocket while walking and I noticed it turned the back light on, I've tried soft reset, phone reset, letting the battery run out, but it still on!!! I just got the phone 3 months ago, what should I do?

  • Thumbnails are visible, photo's show black screen

    I use iPhoto now for about 4 weeks. In the beginning everything went perfect. After loading the photo's I could see the thumbnails. Clicking on the thumbnail lifted the photo ready to be modified. Since today, the new added photo's are still visible