How to setup my blackberry torch to my mobile internet network will work

My mobile network has an APN, Proxy #, and a Port #, however I do not know how to find the settings on my torch so the internet will work. Does anyone know how to help me?
thank you

You need a specific blackberry data plan in order to use data functions on your blackberry, once this data plan is in place the settings will be pushed to your phone in the form of service books so you do not need to configure them yourself.

Similar Messages

How do I set up my AT&T mobile internet device on the Mac? Each time I go to the network set up, I don't have an option to select the device, only WiFi.

How do I set up my AT&T mobile internet device on the Mac? Each time I go to the network set up, I don't have an option to select the device, only WiFi.

Are you getting Airport confused with Airplay?
Secondly, I don't think a Mac can be used as an Airplay receiver. You'll need an Apple TV for that. There are third-party software packages that can turn your computer in to an Airplay receiver, but I'm not sure what the rules are about mentioning them here on Apple's forums.
Hint: google "airplay software"

Blackberry Z10 refuse to Lyca Mobil internet network

Blackberry Z10 refuse to work with Lyca Mobil internet network
I have problem to connect my new Blackberry Z10 with Lyca Mobil 3G or 4G. The phone works perfectly if i'm making call or receive. Only the problem i have not internet without wifi who works so good too.
I try in setting ''Mobile Network'' to put a new APN but when I click I have Access Point Name(APN) with ''blackberry.net'' impossible to modify or put new
With the network like AT&T, T-Mobil it works perfectly. Lyca customer service told me to see with blackberry customer service.
I like blackberry but this problem cost me too much
Thanks for your helps.

HI @stesyls
If possible can you try the following steps?
Remove battery and SIM card from Z10
Start device, go to the APN screen (Settings > Network Connections > Mobile Network > APN)
Enter the APN provided by your carrier
Back out of this screen to save the change
Remove battery and insert SIM again
Test browsing while connected to the mobile network only
Did someone help you? Click Like! Did a post solve your issue? Click Accept as Solution!
Follow me on Twitter or Google+ and subscribe to the Inside BlackBerry Help Blog

HT5569 how can i get a password so that my wi-fi will work?

How can I get a password so that my wi-fi will work

The Wi-Fi password is normally found on a sticker on base of router.

How do fix my blackberry torch 9800

when people ring me/or i ring them, they can hear me but i can't hear them unless i put it on speakerphone. how would i fix this?

A battery pull usually fixes minor software problems. Since it didn't work, this is obviously a major software problem. I'm going to suggest that messing around with your sound settings probably won't do anything so you should jump right to a reload of your phone's OS. To do that, plug your phone in to your PC and open BlackBerry Desktop Software. Click Device at the top then Update from the following menu. If you're offered a newer version of OS and you wish to load it, go ahead. If you're not offered a newer version or if you don't wish to load a newer version, click View Other Versions. Choose the one with Currently Installed beside it and load it.
Let us know if that helps you.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

How to fix a blackberry torch after it is unuseable after software update was interupted.

please please could someone help me, i have looked all over the internet for answers.

remove your battery and keep it out when you connect to the Desktop Software. You will get a pop up that the device can't connect and there should be Retry, Update and Cancel buttons. Select Update and you will then be able to reinstall the current device software version.
When the load is progressing, you will see a step that says "Wait for device initialization". At this point, insert the battery and the reload should complete.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

How do I set up a track that my fade tool will work on?????

I'm trying to do fades on my tacks using the fade tool.
I open a new track, record something and go to tools and pick the fade tool.
But it's not letting me do a fade at the start or the end of a track.
I go to the inspector window and look at the Region Parameter Box.
There I notice that there was not much info in the Region Parameter Box in the inspector window, just (loop, delay, follow tempo)
On other tracks from the templets in logic 9 I could do a fade in and with the fade tool, but I notice the Region Parameter Box in the inspector window had a bunch more info like,
(loop, delay, gain, fade in, curve, fade out, follow tempo)
So how do I set up the track that has all that info in the inspector windows Region Parameter Box,
then I could do my fades with my fade tool.
Thanks for the help..........LEROX

Flatten your Take Folder.
Christian

Everything on the screen is huge. Therefor I can not get calls or call out etc. How do I get it back to normal size so it will work?

My screen now has everything on it huge. Therefore I can not use the phone to answer calls, make calls, etc How do I get it back to normal size?

Hi pizzamanvin,
Sounds like you have Zoom on. Double tap three fingers on the screen to put it back to normal size. You can turn off Zoom altogether by going to Settings>General>Accessibility, and turn off Zoom.
Cheers,
GB

How do I connect my Airport Extreme to the Internet, It will not connect

I just got roadrunner internet and switched from dsl. I've been using the modem that came with dsl, but now I'm trying to use the Airport Extreme. My Imac does have the airport card, and I am able to get it to work with the airtunes to work with my stereo speakers, but I can't get a wireless internet connection. I've tried going through the set-up and I still can't get the internet connection to work. Can someone help me set it up?

I'm a little cofused. Do you have an express or an extreme? Or both? In the case of either the solo exrpress or the extreme, they need something to access the internet with. It would need a source, most likely to be ethernet connected to the modem. Unless you have a modem that also acts as a wireless router or some such concoction. You would then have a wireless router to give your iMac a wireless signal.

How do I burn a slide show to a DVD which will work with my DVD player?

I've been able to create a slide show of photos with selected i-Tunes music. I can create a file and burn it to a blank DVD R, but both a regular and Blu-Ray DVD players say the disk is incompatible.
Also, is there supposed to be a file under Events where you can keep other slide shows?

You need a video DVD authoring application like iDVD. Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar. For iPhoto 9.4.3 and earlier select Size = Medium or Large. For iPhoto 9.5 and later selct 480p.
Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
Follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com. Why, because iDVD (and iWeb) was discontinued by Apple over a year ago.
Why iLife 09 instead of 11?
If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides themes from iDVD 5-7. The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them.
Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
This shows the iDVD contents in the iLife 09 disc via Pacifist:
You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
NOTE: there are other video DVD authoring apps available thru the App Store. However, they do not have the themes and professional appearance that iDVD provides.

BRAND NEW blackberry torch 9800 (white)

Does anyone know a sure place to buy an unlocked blackberry torch 9800 (white)?
I'm fed up with liars on eBay! Many of them say "brand new" but the phone is sometimes damaged..

hey man, you be better off getting a t mobile 9810 that will work on the faster 3g speeds.
9800 only will get 2g
Hey man, Happy 420. Enjoy the wonderful blackberry. Peace out my froggies.

How do I connect via bluetooth my ipad with my Blackberry Torch

How do I connect my ipad to my blackberry torch via bluetooth.

am kinda regretting why I bought an iPad if it cannot interact with other devices, like the blackberry phone I have. I want to share pictures between the two devices but I cannot! Why is this so??????
iOS does not support file transfer via Bluetooth. If you want to transfer photos, you'll need to sync through your computer or use a cloud-based service.
Please help me otherwise this will be the last iPad I'll ever own.
If you think some other device will suit you better, by all means sell your iPad and buy that other device.
BTW, posting in a thread that's over two and half years old is not usually the best way to get help from us, who are all just your fellow users, just FYI.
Regards.

How Do I tether the ipad to my Blackberry Torch?

I just added tethering to my Blackberry Torch and bought an Ipad for when I go on the road - but how do i tether the the two? AT&T told me to use my data cord and it would work just fine - however the data cord does not have the right connector??? How do I make this work?

You can't. You cannot tether a Blackberry Torch to an iPad period. It cannot be done.
You only need post once and then wait for a few minutes and get a response.

How do I re-install the operating system on my BlackBerry Torch 9800 - I am sure it is hacked.

Greetings,
Can someone point me to instructions on how to re-install the operating system on a BlackBerry Torch 9800 and then upgrade it to the latest release?
I have done this several times in the past, due to recurring hacking, but have lost the instructions.
Thank you very much for your help.
Regards,
Jean-Pierre
P.S. I would preffer a releas of the OS without any pre-install applicaitons such as Twitter, Facebook, LinkedIn,
and above all, Whastapp. Thank you.

Hi and Welcome to the Community!
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I change my password on my email account on my blackberry Torch ?

Have a Blackberry Torch........I need to change my password for my email acount. Going to "set up" doesn't work. what do I do? Please
Solved!
Go to Solution.

Hello nouth,
Please have a look at this Article of KB How to change Password for Blackberry Email account
Hope you got it.
Good Luck
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

How to setup my blackberry torch to my mobile internet network will work

Similar Messages

Maybe you are looking for