How to setup new document for Desktop Wallpaper

hi all
new to the forums here...
i'm making a desktop wallpaper to display an announcement for my graphic design department at school, and i'm wanting to know the best way to set up the new document in PS CS4. i'm using the resolutions found under syst prefs > display prefs, just plugging those numbers into the new document setup for width and height. my question is what resolution i should use for a clean and sharp wallpaper, and should i just accept the default settings for color mode, color profile, and pixel aspect ratio.
FYI: right now i'm working on an  20" Intel iMac. models at school include 17" iMac G5's or early Intel iMacs, 20" and 24" aluminum Intel iMacs.
thanks in advance,
daniel

"my question is what resolution i should use for a clean and sharp wallpaper, and should i just accept the default settings for color mode, color profile, and pixel aspect ratio."
The resolution is irrelevant - pixel dimensions are all that matter. For instance, if the target desktop dimensions are 1920x1200 pixels, it doesn't matter if the resolution is 72 ppi or 300 ppi. Color mode should be RGB, profile should be sRGB and use square pixels.
-phil

Similar Messages

  • How to setup a document for tabloid and letter printing?

    Hello,
    I need to make a brochure. It is 4 pages. We need it for two different end products:
    1) Printed onto double-sided 11 x 17 tabloid in a landscape orientation. It will then be folded in the middle (so a 4 page brochure).
    2) A 4-page 8.5 x 11 PDF, for clients to print out themselves.
    I originally had a 2 page tabloid document (no facing pages). It worked great when I sent it to our printers, but I couldn't PDF it properly to 8.5 x 11. What I ended up doing was making a brand new 8.5 x 11 document, then laying out each individual letter-sized page.
    When changes are required, I have to make changes to both documents, which is annoying and open to error/mistakes from me (e.g. change in one document not in the other).
    Is there any way I can have a single document setup so that I only need to change output/export/print settings when making my two different end products?
    My skill level in InDesign is beginner, so alot of terminology is beyond me.

    Did you know that you can place an InDesign document into another InDesign document?
    Start with your letter-size version, and make sure it's up-to-date. Save it, close it, then start a new empty tabloid document. Go to File -> Place and place the four pages of your letter-size document into your tabloid document.
    When you need to update both docs, then make the text changes in the lettersize doc. Save and close, then open up the tabloid doc and update the links. In fact, unless you've changed the way your install of ID is set up, then the moment you open the tabloid doc, it should ask you if you want to update your out-of-date links.

  • How to setup a document for self expiration\Limited usage after a while?

    Is it possible to setup a .PDF file to make it unwatchable after a certain number of invocations and / or date? Is there also a solution to the problem of the reader first doing duplicates of the file? Once the document reached its limit, it is desired that rewinding the clock, etc. would not revive the usability of the document. I intend the document to contain a picture, hopefully this doesn't make a difference.
    If achievable, what minimum level of Acrobat version is required to generate and what minimum version of Acrobat Reader is required to open the file?
    If Acrobat/.PDF technology wont do it, are there any other means to accomplish the task?
    Thanks,
    David

    You can use the server product 'Adobe LiveCycle Rights Management':
    http://www.adobe.com/products/livecycle/rightsmanagement/

  • HT5570 Can any one let me know how to setup new security question answers required for purchases of which the previous answers been forgotten.

    I am trying to do some purchases from my account balance of USD 50.00. But not able to do it as I have forgot the answers for security questions. Thus, I have been trying to setup new answers for that, but could not find any way to do so. Please help me on this.

    You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
    (118301)

  • Illustrator CC how to setup custom document profile

    How do I set up a custom document profile in Illustrator CC and save it for future use?
    I do not see any way to save it.

    1.  Re: Illustrator CC how to setup custom document profile
           Francesco Della Peruta     Sep 11, 2013 11:31 AM  (in response to dinnys)   
    I think you have to create a new document, set all your preferred options, leave it empty, and save it as a template file, ready to reuse .
    Otherwise you can:
    Create a new document, set all your preferred options, leave it empty, and save it in the same folder of the adobe preset.
    To find the correct path select the preset profile menu, in the new document window, and choose browse.
    I hope this help"

  • How to create new version for material

    Hi expert,
    Can anyone please guide me step by step on how to create new version for material and vendor? Please also mention transaction and details step by step.
    Thanks

    HI,
    Do you mean to have version management for purchasing documents?.
    Best Regards,
    Arminda Jack

  • 1 How to setup new company name   2 How to setup row, rock and bin

    Hi,
    Anybody who can help me how to setup new company.
    And also how to setup row, rock and bin because we need to assign a location for our spare parts inventory.
    Thanks in advance.

    Row/rack/bin sounds like an inventory system. For a simple system you might want to build your own from scratch, but for even a mid-sized company you really want a shrink-wrapped solution -- i.e. Oracle apps or SAP.
    You don't want to be figuring out how to model material transactions, move orders, etc. Nor do you probably want to dive into various cost accounting options.

  • How to setup new sales payment term?

    Hi Experts
    How to setup new sales payment term?   Does it only configure in IMG ?
    Thanks
    ALice

    Hi Experts
    Thanks a lot, May I check if we need setup new 70% LC at sight;30% after I&A, it only need input the descritpion , DO we need check the option for customer and vendor both , Or need input percentage in below number /percentage field in OBB8?
    Thanks
    Alice

  • How to create new scope for SharePoint calendar?

    How to create new scope for SharePoint calendar?
    I have a calendar list to which I want to create following scopes-
    Annual View
    Half Year 1 (Jan-June)
    Half Year 2 (Jul-Dec)
    Quarter 1 (Jan-Mar)
    Quarter 2 (Apr-Jun)
    Quarter 3 (Jul-Sep)
    Quarter 4 (Oct-Dec)
    How this can be created. Any help appriciated. Thanks.

    Hi Pratima,
    Can you please see below link and code snippet for how to
     format date in gridview.
    http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head runat="server">
    <title>Gridvew Date format</title>
    </head>
    <body>
    <form id="form1" runat="server">
    <div>
    <asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
    <RowStyle BackColor="#EFF3FB" />
    <FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
    <PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
    <HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
    <AlternatingRowStyle BackColor="White" />
    <Columns>
    <asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
    <asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
    <asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
    <asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
    <asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
    </Columns>
    </asp:GridView>
    <asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
    </div>
    </form>
    </body>
    </html>
    Hope this will help you.
    Regards
    Soni K

  • HT5622 hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

    hi. i bought iphone 5 witch was locked, i made factory reset and now phone asking apple ID and pasword witch i dont know. i was writing to seller but he is not answering me. how to set new account for my iphone 5 what i could use it?

    The iPhone has a feature called "Activation Lock" described here:
    http://support.apple.com/kb/PH13695
    Without that Apple ID, you will not be able to use that iPhone.

  • Hi All how to add new payscale  for an employee in sap hr-abap,its urgent

    Hi All ,
    how to add new payscale for an employee  in sap hr-abap,its urgent.
    Message was edited by:
            bharat kumar
    Message was edited by:
            bharat kumar

    Hi
    If that field which you wants to add is available in one of the structures like EKKO,EKPO then you can add that field just beside the other fields
    If that field is not there in the any of the structures then you can define a variable using define command
    /: DEFINE  &VAR&
    / &VAR&  = <some value>
    or you can write subroutines to fetch the data from outside tables and can use those fields data in the script
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • How to setup the RV120W for quickvpn

    Hello,
    The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
    Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
    Thanks for any help

    User Guides for thee rv120W are here:
    http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
    http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
    and theres some more stuff over on my site:
    http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

  • How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

    How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
    I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
    I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
    Below are the Windows 8.1 client IP Configuration
    C:\Windows\system32>ipconfig
    Windows IP Configuration
    Wireless LAN adapter Local Area Connection* 3:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Wireless LAN adapter Wi-Fi:
       Connection-specific DNS Suffix  . : home
       Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
       IPv4 Address. . . . . . . . . . . : 192.168.1.5
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 192.168.1.1
    Tunnel adapter isatap.home:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : home
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
       Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
       Default Gateway . . . . . . . . . :
    Tunnel adapter iphttpsinterface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
       Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
       Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
       Default Gateway . . . . . . . . . :
    Below are the IPConfiguration details for Direct Access server
    C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
    PsExec v1.98 - Execute processes remotely
    Copyright (C) 2001-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    Windows IP Configuration
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
       Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
       IPv4 Address. . . . . . . . . . . : 10.192.1.25
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.192.1.1
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
       Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
       Default Gateway . . . . . . . . . :
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter IPHTTPSInterface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
       Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
       Default Gateway . . . . . . . . . :
    ipconfig exited on MURA01 with error code 0.
    Below are the IPCONFIG Details for SCCM Server:
    C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
    PsExec v1.98 - Execute processes remotely
    Copyright (C) 2001-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    Windows IP Configuration
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
       IPv4 Address. . . . . . . . . . . : 10.192.1.30
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.192.1.1
    Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    ipconfig exited on sccm01 with error code 0.
    What will be the IPV6 values to configure boundary?

    Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • How to make New Document and Upload Document to have same Content Type in Document Library in Sharepoint 2010

    Hi,
    How to make 'New Document' and 'Upload Document' to have same content type(Custom) in Document Library in Sharepoint2010.
    Note : I have created custom Content Type since I have custom columns along with upload column..
    Regards, Shreyas R S

    go to library settings 
    Change new button order and default content type
    set your custom content type to be #1
    when you upload new document it will automatically have your custom content type
    Hope that helps|Amr Fouad|MCTS,MCPD sharePoint 2010

  • New Document for Residual Items

    Hi,
         During Incoming Payment processing could we create a new document for residual item instead of creating a line item in payment document.
    As we know if we use residual tab SAP clears the Original Invoice and creates a new line item in the clearing(payment) document which will be open. Is there any way we could create a new Invoice for the residual amount. The issue here business does not want to see the residual payments with the same document type as payment document.
    Thanks,
    Sarat.

    This cannot be done using standard SAP functionality. Even to achieve it through custom coding, I assume it is going to be complex.

Maybe you are looking for