How to setup NPIV as Cisco9124 directly linked a Emulex HBA N-port

I had a cisco9124 switch and enabled npiv on the switch.
also I had a HBA card, and setup a N-port.
I can find the N-port pwwn number on the cisco9124,
and setup the virtual pwwn to my vsan1.
my question is:
my configuration is correct? can let 9124 directly linked a HBA N-port as NPIV configuration? I think something is wrong. I am no NPV device.
how can let the virtual ports know which actual port manage the virtual ports.
I mean for example:
my fc1/8 port is with 4 virtual ports, how to setup the 4 virtual ports to fc1/8,
or just donot care the fc1/8, just found all the virtual ports and setup the virtual ports luns, then my emulex HBA card will find the luns?
BRs

we use Qlogic 4G 2-port HBA and use RHEL5 OS on DellT105
we are in RHEL5 created 4 virtual ports on one port of HBA.
then we can find the 4 virtual pwwn on our MDS9124, then I added the pwwn on our vsan and reactivated.
then created 4 luns, each lun assigned to each virtual port separately, finally I checked our RHEL5, only found 1 lun is correct. found 2 luns lost and 1 luns allocated to 2 virtual HBA.
configuration like the following on our switch:
vsan 1 wwn 21:01:00:1b:32:a9:f0:04 fcid 0x2e1435 dynamic
vsan 1 wwn 21:01:00:1b:32:a9:f0:05 fcid 0x2e1436 dynamic
vsan 1 wwn 21:01:00:1b:32:a9:f0:06 fcid 0x2e1439 dynamic
vsan 1 wwn 21:01:00:1b:32:a9:f0:07 fcid 0x2e143a dynamic
    member pwwn 21:01:00:1b:32:a9:f0:06
    member pwwn 21:01:00:1b:32:a9:f0:07
    member pwwn 21:01:00:1b:32:a9:f0:04
    member pwwn 21:01:00:1b:32:a9:f0:05
zoneset name IBMzoneset2 vsan 1
    member IBMzone2
zoneset activate name IBMzoneset2 vsan 1

Similar Messages

How to Setup Email Text Boxes Directly on Site?

Can someone help me with terminology to search for how to setup a Web page where visitors can suscribe to a news letter by typing in their information into "live" text boxes, and click on Send so it emails to my contact mail address?
Once I know the terminology, I am sure it is a very basic question...
Golive 8.01

Hi:
What you are talking about is building a "form". What you have posted is a sample of a pre-built form and a service that offers free coding, or will go the next step for you and install a functioning form for you.
Golive has what you need to build forms on your own - it has all the text fields, radio buttons, submit buttons etc. available, and any book about whatever GoLive version you have (including the online HELP) will have step-by-step instructions on how to do the building on your end.
The tricky part comes with making the form actually work. GoLive can only build the form page with all the fields and buttons, etc. but processing a form requires a server, and coding has to be added to your page that directs the page to interact with the server and process the form.
Different servers (i.e. different hosting companies) handle forms differently. Some use cgi scripts, some use php scripts and occasionally other types. Some companies have prefab forms setup for you, similarly to what you posted from FreeContactForm, with good directions on how to make the scripts work with your forms. Others have prefab forms and poor directions or no directions on how to make the scripts work with your form. Other companies tell you you're on your own altogether.
I'm from the design side of the world and doing forms was quite intimidating for me originally. It doesn't intimidate me anymore but it's usually a minor pain in the a$$. Depends on the hosting company. Some have instructions that are clear and easy, etc. Others, not so much.
What I generally do is start by contacting the hosting company Tech Support and asking how they handle forms. They may direct me to their prefab stuff, often accessible through an ADMIN portal, or they'll tell me to go find my own script, or whatever. Depending on what they offer I'll take a look and if I have questions I'll call them back or not.
Basically with forms you have 2 key things to grasp. What coding do you need to add to your web page? And do you need to address any kind of separate document? Sometimes there will be a script page that resides on the server (in a cgi-bin, or php folder, or on the root) that you would need to open and add something to. In your web page itself you always have to add something to the form part of the coding, but sometimes you add something to your head code as well. It just depends on the script involved.
Generally you need to provide the email address that the form results will be sent to, a URL for a "Thank You For Subscribing" (or whatever) page that will appear after the person hits the "submit" button, or other page you want to appear (maybe you just have them go back to the homepage on the website, or you send them to a default "your form has been submitted" page that the script will generate if you don't provide a URL. Thats ez, but the pages are usually ugly and won't match your site at all.). Also, you usually have options to provide a Subject Line for the email that will be generated so that the receiver knows that the email is from the form, etc.
FreeContactForm appears to be offering to just handle all that for you and you can certainly go that route. When I first tackled forms I needed a programmer buddy to help understand what the heck was going on - you'll probably need someone to help you. But it IS good to learn to understand the basics because, if you build websites it's going to come up over and over. And it's good to learn to work in source code at least to some extent, because that will come up too.
But if you're building something for fun now and aren't going to do this a lot, you probably don't need to hassle with it.
Hope that helps and good luck!

How to setup new valuation class and link it with gl a/c

hi
can some one help me setting up new valuation class and then how to link it with gl a/c
i m new so if some one can explain me in steps then that would b awsome.
thanx

Hi Iqbal,
Follow the below path for defining valuation class ;
SPRO>Materials Management>Valuation and Account Assignment>Account Determination>Account Determination Without Wizard--Define Valuation Classes
Note that Valuation class is linked to account category reference.
Account category ref is linked to Material Type.
Thus the system determines Valuation Class for a particular mat.type.
For detmining G/l accounts:
SPRO>Materials Management>Valuation and Account Assignment>Account Determination>Account Determination Without Wizard--Configure automatic postings
Click on account assignment. Double click on BSX , enter chart of accounts .
Against every valuation class you can find the G/L accounts.
Regards
Ramesh Ch

How to setup the article master and link up with the image file of that art

I nteed help to setup the article master to display article image.
Can someone guide me with the details?
Thanks

Hi Colin,
In MM41/42/43 from the Main menu select System->Services for Object. Now select Create to Attach any file (the article Photo).
You can view the Photo by going to same transactions and select System->Services for Object. Now select Attachmetn List.
This is one of the method to attach document to an object in SAP.
Another standard way is to do it using DMS module. I have done it before but do not remember the exact process. Will let you know if and when I get details.
Regards,
Arun Devidas

How to setup WRT54G to iBook Airport, but has no ethernet cable port

I am trying to help a friend who broke her ethernet port plug. She has an iBook 600 running OS X Panther 10.3.9.
She bought an Airport card and installed it.
Bought the Linksys WRT54G wireless dsl router, but cannot get it going with her dsl because linksys setup CD only wants to install windows "exe" files.
Can she directly access the router just from Safari web browser by using the 192.168.1.1 / user blank / pw admin, and then go through setting up a WPA connection and wpa security manually?
Or does she have to have an ethernet connection first?
(if she must have ethernet cable connection, then she is, up creek with no boat and no paddle)
Thank you.
Best.

Correct... in more specific terms... click on the airport icon.. search for the default SSID( or wireless network name) and connect to it... once you are connected and have verified that you have a valid IP... then your all set to access the 192.168.1.1 page and configure the DSL and Internet.
For the wireless settings and WPA though, as per the last post... almost every single data you change there will kick you off the wireless network and you have to reconnect again...
For example, since you were connected to linksys (unsecured)... the moment you change this SSID to a personalized one... say myfriend101... you'd be off the router UI after you save the settings... so you have to reconnect manually again to myfriend101 (unsecured) again... once you are connected to this... and then decide to put say WPA security.. you'd get kicked off again the moment you save... (you get the pattern)...
Message Edited by sharkbyte on 05-12-200701:36 PM

How to setup for Creative Sound Blaster Audigi2 ZS connect to MIDI port of Yam

Hi all!
I just buy Audigi2 ZS and want to connect MIDI port to MIDI port of my YAMAHA keyboard. But when use Adobe Audition v2.0 and editting so I cannot connect and tranfering my data to YAMAHA and revert. Some body can help me fix this problem. Thanks you very much.

Just FYI.
I probably overestimated RHEL/OEL-5.3 capability to "compete in Music Showbiz" as a digital studio workstation OS. Seems that "very old" alsa kernel drivers (1.0.17), compiled with actual kernel, don't like Audigy cards when it comes to MIDI interface, despite the fact the audio is perfect. Although I am still not sure nothing could be done as a workaround in order to get MIDI worked on OEL-5.3, the fact is that SB Audigy MIDI works like Roland Synth, sounding amazingly, if the kernel 2.6.18-128.1.1.0.1.el5 is recompiled with the actual alsa driver version 1.0.19 (modules snd-emu10k1, snd-emu10k1-synth, etc).
It's interesting that overall device and loaded-modules schema's picture is the same as with old alsa (original kernel). That's why I still think something could be done, at least as workaround, to get MIDI worked with original OEL-5.3 kernel.
NJ

How to use Combobox to direct link

Hi all, how can i use combobox to direct link in adf. For example: I have a list of value with combobox, when i selected "Page A" ---> go to Page A, selected "Page B" ----> go to Page B
Thanks

Hi,
How about using a menu model instead of a combo box? Check out this example : Oracle JDeveloper 11g Release 2 Tutorials - Creating ADF Menus for Page Navigation
-Arun

How to setup osx Firewall to allow incoming access to nginx?

Hello!
How to setup osx Firewall to allow incoming access to nginx (any port)?
Local access is all fine, but when I trying to open http://<myip>:<port> from outside (other device in same network) there are no answer.
If I turn off Firewall all works fine, but I want to keep my safety.
Adding "nginx" binary file to Firewall list doesn't help.

          "Victor" <[email protected]> wrote:
          >
          >Hi,
          >
          >I need to limit access on one JSP to a user. All the
          >other JSP's
          >should be available to averyone all the time. The following
          Victor,
          two ideas:
          1. Once you've seen where jspservlet compiles the jsp to, try adding
          an explicit servlet registration (then an acl for that servlet)
          I'm not sure if it would work, never tried.
          2. If it doesn't, well, you have a servlet class available from
          the jspservlet/jspc process. Move it to servletclasses (or wherever
          you keep other servlets) and register/acl it normally

HT5621 Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please?

Hi, we have three iPhones and iPods which are currently linked to one apple ID. I have now set up an apple id for each phone/iPod. How do I go about re-directing the two accounts to the relevant one that has now been set up please? I could do with a step by step guide to follow as am worried about loosing aps, music, photo's etc which are on the individual phones.
Thanks
Mandi

On each of the phones you're gonna use a new Apple ID for iCloud: turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
This will have no affect on the ID you share for iTunes content, & you can continue to do so.

After effects does not import video when I direct link from premiere pro. Why not? how do i fix this?

I wanted to add some motion tracked text elements into a clip of a interview in my premiere pro cc timeline. I left clicked on the clips that i wanted to "replace with after effects composition".. so i clicked it to and it opens a new comp in after effects.. Only there is no video opened in the comp.. Theres nothing there. I cant figure out why it doesnt bring the video in? Its not in my project panel in ae.. and ive tried direct link by left clicking the clip and going through the menu.. Tried closing AE and then doing direct link. Tried opening AE first and then doing it.. Not working no matter how i try it. Whats the fix?
Im using all CC products. Premiere is up to date, after effects is not. I will be updating it to see if that fixes the problem. As soon as I do. I will post a comment as to whether it fixed it or not. In the meantime i could use some help!
Computer specs:
Imac
OS X Yosemite (10.10.2)
Processor: 2.8 GHz Intel Core i7
Memory: 16 GB 1333 MHz DDR3
Graphics: AMD Radeon HD 6770M 512 MB

*right clicked
My bad!

How to setup word docs, converted to PDF on local drive with links to a second file at a page

how to setup word docs, converted to PDF on local drive with links to a second file at a page
Need to setup a set of word documents, converted to PDF that has links from one file to a second file at a given page.
I would like to setup a set of pdf documents, on the hard disk of a PC or Mac, that can be open with acrobat pro running on the same computer and have the link jump to, and open in a new window, in acrobat pro, to a given page of a second document in the set.
Is there a way to setup a link in word and the conversion to pdf that will result in a link that is equivalent to the acrobat link type you get when you add a link of the type Go to a page in another document?
Tools-Advanced Editing-Link tool, make a box
Check: Go to page view, Next (Create go to view dialog opens)
Open second document and go to page
Click “Create go to view dialog” to set up link
Result is a link, when view by link properties, with an action of
Go to a page in another document
File: C:\My Documents\second file.pdf
Page: 43
Zoom level: Custom
I got close but did not solve the problem:
I have a version that uses links to a website, using #page=43 at the end of the hyperlink.
That works but will only open to the page if is through the web browser, opening the acrobat reader plugin.
I need to open from a folder on the local harddisk (with relative links), in acrobat pro to the given page of the pdf, on a PC or a Mac.
I could bookmark each page “pagenumberxxx” and jump to the bookmark/page if that would get around some problem
Current Systems in use to create documents with links and view them:
Windows XP SP3
Word 2003 SP3
Acrobat 9 pro version 9.4.4
Or just to view them:
Mac OS 10 Lion version 10.7.4
Acrobat 9 pro version 9.5.1
(note I have limited understanding of Mac’s)
John

No. There seems to be no automated way to do it. You can of course go into the PDF and manually add links after you have converted to PDF, but that is what we want to avoid having to do. We want it to be automatic from the Word doc.

How to setup a default direction for new divs in fluid grid layout in dreamweaver?

Hi,
how to setup a default direction for new divs in fluid grid layout in dreamweaver? I am an RTL interface user, I need my new divs to be inserted from right to left not Left to Right! could it be in dreamweaver?
Thanks.

This may get me into strife, but my experience is that you are better off finding another platform for your RWD.
The framework that I tend to use is by Zub-Foundation http://foundation.zurb.com/.
A commercial product that I have come to appreciate can be found here http://www.projectseven.com/products/tools/composer/index.htm. Please do not mention me if you happen to choose this product.

How to I get my Muse site to have a "Direct Link" to a section on my website.

How to I get my Muse site to have a "Direct Link" to a section on my website. For example, if I am under the busniesscatayst I can direct some to an exact page in my site through an email or Facebook post: http://biteonfishing.businesscatalyst.com/buy-now.html However, I can not perform the function when I am not including the Business Catalyst www.BiteOnFishing.com I want to make so I can send people to the link using www.BiteOnFishing.com/buy-now.html. Any advice is much appreciated.

You need to point your domain name DNS to the Business Catalyst server and then set up the domain name in the Business Catalyst site admin.
Adding a domain name to your site and taking site live

How can i download a photoshop trial from a direct link?

How can i download a photoshop trial from a direct link? It is imposible to avoid the proxy server in my corporation.

Hi david10m,
Which version of Photohop do you want to download.
CC: http://prodesigntools.com/adobe-cc-direct-download-links.html
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
Kindly follow the very important instructions before download.
Regards,
Romit Sinha

Has anyone setup Helix to have a direct link to iTunesU?

I am a newby so I may not be asking the correct questions here.
I have a Helix Media Library server.
HML has the ability to be my intranet streaming server for iTuneU content.
In the Helix setup their is a place holder for a direct link to your iTunesU account.. They give an example of http://phobos.apple.com/institution
Does anyone know the correct format? Would the URL be the same for links to content on my HML server and users to view content?
I have a URL but it is for the iTunesU administrative page. Is their a page on within the administrative page that shows this URL?

Are you able to try taking them back to the store that you bought them from and ask them to activate them properly ? If not then you can try contacting iTunes Support via this page (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

How to setup NPIV as Cisco9124 directly linked a Emulex HBA N-port

Similar Messages

Maybe you are looking for