How to setup OD Master with 1 Static IP and NAT?

I'm attempting to setup an OD Master on my server. Currently, I only have 1 static IP from the ISP, so the router gets it.
Pretty much all ports are forwarded from the router to the server which is running DNS, Mail, Web currently as a standalone server.
The server (in network preferences) has a local IP address.
DNS is setup using global address (PTR record is done by the ISP)
DNS resolves correctly (checked using dig)
Mail services all are good.
Web services all are good.
So, by my checklist:
hostname: server.example.com
DNS: resolved to FQDN and IP
All should be ok for a OD Master (so I thought).
I added the Open Directory Service.
Changed Standalone to "Open Directory Master"
Followed the steps.
Kerberos was stopped when finished. I noted that during OD setup, after the screen where I input the OD Administrator username/password, the next screen should be related to Kerberos, but the screen did not come.
Is it possible to use Kerberos in my configuration? (single IP nat to local IP)?
+(I suspect that even though DNS resolves, there is issues with my DNS setup as sudo changeip -checkhostname reveals a primary ip address as a local address and not the global address. The DNS hostname is not available, please repair DNS and re-run this tool.)+

... unanswered. withdraw question

Similar Messages

Proper setup for a network with Public Static IPs and Private IPs

hello all-
i am trying to setup a network with public static IP addresses and local (internal) IP addresses with 192.168.xxx.xxx format. i will try to explain as best i can how i have it set up and what my issues are.
i have COX business services in my home and 8 static public IPs assigned to me. i have tried setting this up and everything internally (192.168.xxx.xxx) works fine and all the devices can get to the outside world fine but when i try to access ANY of the devices on the public IPs from outside the network i get absolutely nothing. the browser just times out and i cannot ping the devices even though COX can see and says the devices are bridging over. COX is unable to get a response when they ping the devices either.
one of the devices is a Synology NAS with one Ethernet port that is using a public IP and the other using a 192.168.xxx.xxx address. when the Ethernet port is setup using a static public IP COX can see it but they get no response from a ping and when they go to the address to get the login page the browser times out. when i reconfigure the port for DHCP it grabs a public DHCP address and when COX pings that they get a response AND they are able to type the DHCP adress in their browser and get to the login page no problem. when i switch back to the static IP they can see it but again are unable to get a response from a ping and are unable to go to the login page.
my setup is:
COX Modem (only has 1 Ethernet port) ====>> 8 port NETGEAR Gigabit switch (all devices with Public IPs are plugged into the NETGEAR switch)
NETGEAR switch ====>> WAN Port on Airport Extreme (latest version w/all software updates)
LAN Port Airport Extreme ====>> CISCO 2960 48 port Gigabit Switch (all internal devices are plugged into the CISCO switch)
like i said everything with the 192.168.xxx.xxx connects and i can connect to just fine but none of the devices with public static IPs can be pinged even though COX can see them bridging over. i have tried all new cables on the devices and that didn't work so it has to be something with my setup.
do i need to add another router to this configuration because i have extra airport extremes lying around i can use if someone could just tell me how the setup should be. i also have a few ports open on the CISCO switch; is there a way i can use it for the 4-5 devices that have public IPs? or will that cause a problem with all the other devices plugged into it with the 192.168.xxx.xxx IP addresses?
i'm not a networking guru (obviously) so if you are able to help me get this setup properly can you try not to use Doctoral Level syntax in your response? i would greatly appreciate it!
i appreciate any and all help... thx in advance!

Duplicate posts.
Go HERE.

How to setup the portal with the uniform style for SRM + Esourcing?

how to setup the portal with the uniform style for SRM + Esourcing? We will setup SRM 7 + esoourcing + portal, but as we know esourcing screen style is not same with SRM, so how to uniform the style between this 2 diffirent software? any body have idea?

Hi,
SAP E-Sourcing 6.0 is the solution. It is same look&feel.
Regards,
Masa

SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?

Hello IDM-experts,
where can my customer find information about
SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
Customer situation description:
The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
SSO access to the Abap systems via the SAPGui. See screenshot as an example.
Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
this or if it is possible via SAP IDM 7.2.
You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
Kind regards,
Daniela

Do you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
Thanks
Tim

How do i mail merge with the new Pages and Numbers?

How do I mail merge with the new Pages and Numbers?
On Pages 09 I have a document that draws variable data from a spreadsheet created in Numbers.
With the new Pages and Numbers program update, my links are lost and I am unable to see how to correct this.

Thanks Peter,
very disappointing.
My Pages 09 keeps opening in the new one.
I dont think they want me to be a loyal customer anymore.
They changed Final Cut Pro, so now I use Premier Pro
Aperture 3 has been left behind so now I moved to Lightroom 4.
And now Pages 5 does not have a vital component, so back to Word.
Sad day
Thanks again

My iPhone is having problems and I have to send it into Apple to get a fixed but in the mean while I need a phone. Could my old env touch act as a temporary replacement with the data plan? And if so how to I activate it with going to Verizon and once I ge

My iPhone is having problems and I have to send it into Apple to get a fixed but in the mean while I need a phone. Could my old env touch act as a temporary replacement with the data plan? And if so how to I activate it with going to Verizon and once I get my IPhone back will I be able to activate it without going to the Verizon store?!? Thanks:)

Im sorry. Im on my ipad and i didnt read that.
Sorry again

How to fetch service order with partucular system status and user status

Hello All,
How to fetch service orders with specific system status and user status.
thanks

I want tables or views from where I can fetch service orders. I have to design ALV report based on this.
I want to fetch released service orders with status INIT and RENT.
Here, SYSTEM Status = Released and
USER Status = INIT
RENT
So is there any function module available for the same.....

How to sync Address book with iphone(iOS 6) and 10.7.4?

How to sync Address book with iphone(iOS 6) and 10.7.4

i'm having this issue too. it's a bit more complex though i think so i'll give the details:
a few days ago i added some people to my contacts using my phone. the thing they have in common is they're all new contacts.
they synced over to my macbook address book ok.
then a few days later i had to do a full restore of my iphone for various reasons (the new one, already!) which i did. when i then looked in my iphone contacts, these contacts were no longer there. they WERE however, still in my macbook address book.
so i figured i'd switch icloud syncing off for contacts and then resync to get them back on my phone. it didn't work. so i then turned off icloud sync and tried a good old manual sync via itunes, making sure to check the box for syncing contacts. it still didn't work.
now i'm at that odd place where the contacts are in my macbook address book but not in my phone and i can't seem to get them onto my phone (which is frustrating as ultimately they are phone numbers and in my phone is the best place for them!)
any ideas?

Im switching email accounts on my itunes account am the computer isnt recognizing purchases made from my other account on the new one (apps). How can I sign in with my new account and get the purchases apps on both accounts?

Im switching email accounts on my itunes account am the computer isnt recognizing purchases made from my other account on the new one (apps). How can I sign in with my new account and get the purchases apps on both accounts?

This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that?

HT201269 Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

Where are the notes from my iphone backup and how can I sync them with my new macbook and ipad. And my galaxy 3g if someone is feeling especially generous with their time and attention. Many thanks.

- The iTunes backup that iTunes makes included photos in the camera roll. If yo go to iTunes>Preferences>Devices what is the date of the backup? Is it when the photos were on the iPod? You have to restore from that backup.
- What may have happened is that you backup the iPod after you restored the iPod but before restoring from backup. iTunes only keeps one backup and overwrites the previous backup with the changes.

How to restart iPhone 5 with broken power button and frozen home button?

How to restart iPhone 5 with broken power button and frozen home button?

hmm..just realised that waiting here for answer is like watching paint drying.. Thanks Apple!
So best option is..
1) backup your phone
2) log to iCloud
3) erese your phone
4) pug and restore your phone from backup
.. I'm clearly starting to dislike this company and seriously considering switching to someone else.

Replacing BM on NW with the ISP firewall and NAT

Replacing BM on NW with the ISP firewall and NAT
Hi!
LAN is a tree with 3 servers:
1. NW 6.5 sp8 + BorderManager 3.9 sp 2
2. NOWS SBE 2.5 (Suse) - DNS\DHCP
3. NOWS SBE 2.0 (Suse)
Since I'm connected to the internet through my ISP router (XBOX- Checkpoint), I am considering to remove the first server (firewall) and ask my ISP ro configure the router as a firewall and NAT too.
What are the steps needed to do it without any demages?
TIA
Nanu

nanu,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

How to setup material master classification?

Hi
Does anyone know how to setup a classification for material master ?
We need create a new one for classification type ,area, and so on.
In character , could it have dependence for each character?
Thanks
alice

Hi experts,
Now our request is below , Hope to get your help
1.     Is part in scope?           Valid values: yes / no
Conditions for yes:
a.     Included a product
b.     Not a consumable
2.     If 1. is "yes", is part compliant?      Valid values: yes / no
Conditions for yes:
a.     Does not contain abc
b.     Supplier declaration available
3.     If 2. is "no", is part with exemtions?     Valid values: yes / no
Conditions for yes:
a.     Contains one ore more substance above EU limits with exemptions.
How could I set if question 1 as yes, then go to question 2? How to do the restrict
Thanks
ALICE

How to setup a network with a time capsule, airport extreme and an airport express?

Hello.
First I want to make it clear all my knowledge off wireless networks is going on forums on the internet, before a couple of months ago I didn't realize wireless networking was so intricate so forgive my lack of experience.
I just bought a time capsule (today, 4th generation), I have an airport extreme bought in January 2011 (they just got refreshed so mine is now one generation old) and the same with my airport express (bought in January).
I originally bought the airport extreme and setup a wireless network using the dual band setup. I have no issues with the 5ghz network and most of my devices run on wireless n so I had no issues with them. my only two wireless devices that can not use the 5ghz network is my iPhone 4's which use wireless n but it has to use the 2.4ghz signal. Problem is in my apartment I am bombarded with other peoples 2.4ghz networks so my signal is terrible 10-15 feet from the airport extreme. Near my extreme I am getting signal ranges around 15mb to 20 mb. When Im about 15 minutes away in my bedroom (so one wall in between) my signal plummets to 1-2 mb. sometimes as low as 0.17mb which is not good. I got the airport express to extend my range and placed it in my bedroom. . After setting up the airport express the signal still was terrible. I researched and realized that if the signal strength ***** then the airport express cant boost the signal as much which makes sense in hind sight. I then researched setting up a roaming network or a WDS network. Per research a WDS network was not recommended b/c I was not using a wireless g network. I attempted to create a roaming network and then realized that you can not use an airport express in a roaming network. This has led me to now buy a time capsule.
First, in my setup do I or should I have the time capsule as the primary? I believe its more powerful than the airport extreme but Im not sure if that matters in a network that is distributing wifi from ethernet (thats how I am connected the extreme and the time capsule)
so can I do
cable modem ETHERNET Airport extreme(in the living room where its always been and works great in that immediate area) (3rd generation) ETHERNET Time Capsule(in the bedroom where I usually get poor signal) (4th gen) and then an airport express connecting to the 2.4ghz signal in the bedroom where the time capsule also is EXTENDING the wireless range?
or should it be the time capsule first bc its more powerful?
I tried setting up this setup and everything is green but I don't know if what I am doing is actually working on full cylinders b/c I am confused on some aspects. mainly on the airport extreme which is the primary device I have under the wireless tab selected create a wireless network and on the time capsule it also is on create a wireless network with the network name being exactly the same. Should it be changed to extend a wireless network? and then bridge mode? Should I have different channels for the different devices that are on 2.4ghz?
I am open to hear ANY suggestions, or ideas to improve my setup. PLEASE PLEASE HELP!!!!!!!, lol its been 5 long months of poor internet in my bedroom where my wife has her setup with a roku box and wifi tv (I have those hardwired for now) but mainly for her iPad and iPhone b/c its so bad sometimes she has to turn wifi off and use 3G. I have same issue in my bathroom, sometimes Im getting decent signal and sometimes its so bad I can't open the link on an RSS feed in safari which I have to assume doesn't require that much bandwith?
I have no wireless g devices. The only device I need 2.4ghz for is my iPhone 4's but they both use n also. All my other deivices connect on 5ghz and my 5ghz network is decent, a lot better than the 2.4ghz network atleast.

You wrote so much that I find it hard to address all your concerns. However, here are some thoughts:
1) I'd configure the Time Capsule as the "main" router, connected directly to your cable modem. Configure it to "create a wireless network" and to "Allow this network to be extended". Configure the other devices to "Extend a wireless network".
2) Put any device that's extending the network half way between the main router and the wireless clients. If the signal from the main router is weak at the cllient's location, then the extending device will also receive a weak signal.

How to setup remote access with E4200?

Hi,
I am new to this and I need help from you all on how to setup the E4200 so that I can access the media server when I am in office? Is there a guide or step by step procedure on this? I was browsing on the Cisco website and unable to find it.

The purpose of using DDNS is it substitutes the public/WAN ip address provided by your ISP.We all know that the ip address provided by our ISP(if we are not subscribe to a premium static ip address) is basically public and will always change from time to time.So it will be difficult for us to know what's the ip address our ISP has provided us and this will lead us problems accessing our router or ftp server remotely. Thus by using DDNS' it will now allow us to access the router remotely without knowing what's the WAN ip address.

How to setup OD Master with 1 Static IP and NAT?

Similar Messages

Maybe you are looking for