How to setup ORCLDEFAULTPROFILEGROUP on during synchronization with AD

Users with groups load from AD. And use external authentication plug-in. I want to set defult page for diferents groups, so when a user belongs to group A, its first page after login was page A
I set for profile group A - default home page A, and for profile group B - defult home page B.
In Global settings default page C.
After these settings, when user from group A logs on, portal redirect to page C, not to pageA.
I need that when user log on portal, portal redirect to page for his group.
I set ORCLDEFAULTPROFILEGROUP for user and all work fine, but I cannot set this attribute on during synhronization. I don't know what do it.
Please help.

To run a public VPN server, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
4. Configure any firewall in use to pass this traffic.

Similar Messages

How to setup a Class B network with WRT54GX ver. 2

Hi all,
I bought a WRT54GX ver. 2 router. I wanna know how to setup the IP address say 128.1.50.136 with subnet mask 255.255.0.0 (Class B network)? By the way, 128.1.0.0 is my network zone.
If the router can't change, what should I do? Any other router support Class B network?
Thanks!

bcow wrote:
I did but it doesn't work. It seems don't have 255.255.0.0 to select.
would you state more clear of how to do it? Thanks!
It does not have that because it does not support it... the router runs on CLASS C only because it was designed and made for SOHO only... bussiness lines of Linksys or Cisco can do that....but not this router...
"Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

How to setup a Seamless Transaction Gateway with PayPal (Australia Only)

I've been working with the team at PayPal to allow BC Partners to set up a cost effective way to setup a Seamless Transaction Shopping Cart Process on their BC eCommerce website without the need for a 3rd Party Merchant Provider like eWay or Secure Pay or their bank. This is designed for entry level businesses who want to control their setup costs and keep all funds in one place (PayPal).
Currently BC doesn't support Paypal's Payments Pro plan in Australia so you are limited with either a non-seamless payment process or using a 3rd Party Merchant provider with can be costly.
Without going into too much detail, the setup on PayPal's side is a mixture of a couple of plans, and is a little complicated however through our discussions we come to an arrangement of any additional fee's associated with the setup being waived since this is more so of a technical workaround than anything else.
Basically PayPal is the merchant provider, and the customer doesn't leave your website when making a purchase through the Shopping Cart. The setup is only $25/month plus transaction fees of between 1.1 to 2.4% + 30 cents depending on the number of payments (this is just an initial guide and confirmed on your discussion with the PayPal).
Because the setup involves quite a few steps and departments I've arranged a contact that will fast track this process and is familiar with this unique setup.
How to setup PayPal for a Seamless Transaction Process
Sign up for PayPal Business account Timeframe: <20 minutes
Email Peter [email protected] or phone (02) 8288 0333. CC me [email protected] or mention my name so he can correctly setup the process and apply the discounted pricing.
Prepare for the Verification process for the PayPal account (Proof of ID, Proof of Address, Business documents etc).
Wait for Account Verification. You will be informed to setup both PayFlow Pro* and Website Payments Pro (*the PayFlow payment will be waived as mentioned previously). Timeframe: up to 5 business days depending on swift supply of required documentation.
Wait for your Billing Agreement for Website Payments Pro once application has been approved. Sometimes they will receive a phone call to verify details of the application. Timeframe: Up to 72 hours
Login into your PayPal account to accept the Billing Agreement.
Notify Peter once the Billing Agreement has been accepted so your PayFlow Pro can be linked to your Website Payments Pro
Login into your Business Catalyst Website and navigate e-Commerce > Payment Gateways
Select PayPal PayFlow Payment Gateway (..,AU, ..)
Enter your Username, PayPal Password, and add VSA as the Partner
Setting up PayPal Payments
If you also want to make payments via PayPal (ie, with the customers Pay Pal account) you can continue with setting up the PayPal Website Standard secure with your PayPal Customer ID and your PDT Token which you'll need to setup in your PayPal Account.
If you have any questions give me or Peter an email. I'll continue to update this document as I go.
Please note this setup is current for Australian Pay Pal Customers only. This process does not support re-occurring billing.

Dennis, sounds like you are having issues connecting to your network. Here is what we are going to do.
On your first question, and second question for that matter, I would suggest using a WPA password. Our printers doe not associate with the other types as well as WPA. You should be able to do that, though I have not personally set up a router that way to have experience in how it will react with the networked devices. As for the issues you are having, once the settings are all in the correct order I am going to suggest we connect the printer to the network through the computer.
What you will do is install the printer using a USB connection, then re-run the setup software. Here there should be an option for USB to Wireless. This will be the easiest way to be sure that all the settings are correctly transferred over.
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=303770
You can find the software in the link above.
Let me know if this helps!

HT1338 How to setup an external HDMI screen with a Mac Book Air

How do I setup an external HDMI screen with a Mac Book Air? I am using an Apple accessory Moshi cable interface with a Samsung Syncmaster screen SB24B300 and I am unable to get any response. Thank you.

You need to connect it to the computer using either USB or Thunderbolt. Setup is simply prepping the SSD:
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.

How to setup SCXI1127 in scanner mode with NI-DAQmx

Hi,
I have 2 1127 mux cards in my SCXI frame and a digitizer/DVM in my PC. I am planning to perform a scan on selected channels across both cards using synchronous scanning ( I cannot get handshaking to work ). I found some examples but they are all using initialization string that looks like this: "SCXIn::i,j:CANNER", but that only works with NI-DAQ legacy not NI-DAQmx where my instrument is just called SC1. I do not know how to set it up with NI-DAQ legacy, it will not give me that option ( using NI-MAX I can setup SCXI-1000 but not PCI-4070 ). Also I do not know how to initialize the NI-SWITCH driver so I have it as one instrument with one instrument handle. I am using NI-DMM, NI-SWITCH 3.0, NI-DAQmx 8.0 and MS Visual C++ Express.
Thank you,
Jerry.

Jerry,
This is Travis over at NI.
There are example programs for doing synchronous scanning that ship
with the NI-SWITCH driver. You can access them at
Start>>Programs>>National
Instruments>>NI-SWITCH>>Examples>>C. Choose
"niSwitchDMMSwitchSynchronousScanning." Your resource name will
be the same as the your resource name in DAQmx. Please direct any
further questions to Minh.
Thanks, Jerry. Have a great day!
Travis

How to setup peer to peer network with Vista machine.

Hello,
I just got my very first Apple computer last week and I'd like to copy some files from my Dell PC with Vista Premium installed. I don't have a wireless network setup yet (hopefully soon), but I'd like to copy some files from my PC to my Mini. I was wondering if it were possible to network the two systems using just an ethernet cable between the two.
Might someone know how to set this up or refer me to a document that explains all the steps needed to accomplish this?
Thanks in advance,
Jeff

Apple have a page that talks you through doing this:
http://docs.info.apple.com/article.html?artnum=304721
Probably a good place to start.

How do I fully cancel a synchronization with flickr? How do I clean up my get my Aperture library to accurately reflect what's on Flickr?

I went to add one photo to my Flickr site yesterday and I must have had the whole project selected because it started to upload all 635 photos in the project. I realized this about an hour later when I came back and I managed to pause the synchronization, but I can't seem to cancel it. Clicking on Cancel Task doesn't do anything.
I need to cancel the rest of the synchronization, and then what I would like to do is somehow make sure that what I've chosen to be in my Flickr account is what Aperture thinks should be in Flickr account.
I went into my Flickr account and deleted all of the ones I didn't want. I ended up keeping more than the one I intended to upload, but I sure didn't want all of them. So, right now, the Flickr account is correct, but my Aperture Flickr library is probably all screwed up. How do I clean up my Aperture library to accurately reflect what's in Flickr?
Before I just upgraded to the latest version (after upgrading to Mountain Lion) when I tried to synch to the main Flickr set I've been working in, I got a message saying that Aperture could only add the first 500 photos (I only had about 110 photos in the set), so I'm wondering if I had already somehow accidentally added everything at that point, but it wouldn't do it, then I upgraded and now it's trying to synch everything.
OS: Mountain Lion
Aperture: 3.3.2
Thanks.

I went to add one photo to my Flickr site yesterday and I must have had the whole project selected because it started to upload all 635 photos in the project. I realized this about an hour later when I came back and I managed to pause the synchronization, but I can't seem to cancel it. Clicking on Cancel Task doesn't do anything.
I need to cancel the rest of the synchronization, and then what I would like to do is somehow make sure that what I've chosen to be in my Flickr account is what Aperture thinks should be in Flickr account.
I went into my Flickr account and deleted all of the ones I didn't want. I ended up keeping more than the one I intended to upload, but I sure didn't want all of them. So, right now, the Flickr account is correct, but my Aperture Flickr library is probably all screwed up. How do I clean up my Aperture library to accurately reflect what's in Flickr?
Before I just upgraded to the latest version (after upgrading to Mountain Lion) when I tried to synch to the main Flickr set I've been working in, I got a message saying that Aperture could only add the first 500 photos (I only had about 110 photos in the set), so I'm wondering if I had already somehow accidentally added everything at that point, but it wouldn't do it, then I upgraded and now it's trying to synch everything.
OS: Mountain Lion
Aperture: 3.3.2
Thanks.

How to setup Supp Life Coverage reduction with age

Hi All,
Ravi,
We have a problem with Supplement life coverage dropping on non flex program window when there is a reduction in age. When somebody moves from 64 to 65, the benefit won’t show up on non flex window after starting a LE (open enrollment) and that causes the self service enrollment page not show up the Supp Life the EE is currently enrolled.
It stays fine for people moving from 65 to 66 (within the range), but someone moving from 64 to 65, 69 to 70, 74 to 75 and 79 to 80, the coverage drops on non flex window. The enrollment results window shows their age 64 coverage amount which is fine.
When we try to enroll the EE already enrolled in Supp Life moving to 65, the list of values on NON Flex window shows that the EE is already enrolled with reduced amount and all we do is save.
We have setup supp life to reduce
•     35% when employee turns 65
•     25% when employee turns 70
•     10% when EE turns 75
•     10% when EE turns 80.
We had setup our variable rate profile Age 65 to 69 Reduction, Age 70 to 74 Reduction, Age 75 to 79 Reduction and Age 80 and Over Reduction with usage type of Coverages
Under Coverage Calculations, we had setup Variable Coverages with the above variable rate profiles. We used rules for calculating the upper limits..
We opened SR and support says that the variable coverages with flat range never worked. They logged a bug, but I am sure there could be many clients who use this functionality and was wondering what would be the best method to solve this problem.
Thanks
Veena

We are using variable rate coverages and the coverage amount is calculated right.
But when LE is started and navigate to Non Flex window to change his enrollments, we donot see the Supp Life benfit for this Employee.
When EE loginto self service to change his/her enrollments, SS doesnot show the EE as being enrolled in Supp Life.

How to setup a 'duplicate/mirror view' with a different zoom level?

Hi Photoshop Gurus,
I constantly keep zooming in and out of the same images. It drives me crazy to view it at normal zoom level and zoom back into deep pixels.
Is there a way so that I have a duplicate floating window/view that shows realtime editing of an image at a different zoom level? (Think of it like a display mirroring, but, I am trying to mirror the same document at a normal zoom level).
This is my scenario:
- I usually work with small images/icons.
- I zoom deeply into an image at pixel level ~3000%.
- Change some pixels and do editing
- Zoom back out to 100% to view how it looks normally.
- Repeat and repeat.
Can I always have a 100% zoomed view along side the same document?
Thanks for your help.
PHOTOSHOP CS5 Mac Snow Leopard

The navigator palette is just another document view. Open it, put it where you want, resize it, and you can use it to control (and see) what part of the docuemnt your zoomed in view is showing.

How to setup Analyzer 7.0.1 with Java plugin 1.4.2_03?

Hi, I use Hyperion Analyzer 7.0.1. The default Java Plugin is 1.3.1_09 and in my environment it is working without any problems. In my company there are other non-Hyperion applications that requires java 1.4 or higher. I noticed that Java Plugin 1.4.2_03 is also available on Analyzer installation CD. So I installed this java version on client computer, but when the applet is started it opens the java 1.3 installation window. I probably need to configure some settings on Analyzer server computer. What should I change on server site of computer to have java 1.4.2_03 (or higher if posible) accepted on client computer? Thanks, Grofaty

In pdf book "Hyperion Analyzer Release 7.0 Administration Guide - P/N: D750770000) on page 129 there is instruction (please see bellow). But in my Analyzer.jsp file are "<hya:" template tags. When I try to replace the template tags with the ordinary text described in bellow instructions I got error from Tomcat app. server - unable to compile jsp file. How to replace clsid number of java JRE to get working a java 1.4 version? Is there any file where <hya: are specified and I could change the "<hya:" variables with constants? Thanks, Grofaty =========================================== Configuring Different Java Plug-in Versions =========================================== The Hyperion Analyzer Java Web Client and Administration Tools Client are configured to use the Sun Java Plug-in 1.3.1_09. Administrators can update the Sun Java Plug-in versions by editing the Analyzer.jsp and Administrator.jsp files static versioning statement. This mandates the loading of the specified version of the Sun Java plug-in. To edit the Analyzer.jsp and Administrator.jsp static versioning statement, perform the following tasks: 1. Open the Analyzer.jsp file using a text editor. 2. Search for the static versioning statement class ID, clsid:. The current class ID value is as follows: clsid:CAFEEFAC-0013-0001-0004-ABCDEFFEDCBA 3. Edit the clsid value, to the desired Sun Java Plug-in version. Alphabetic characters at the beginning and end of the string are set by Sun. Do not change these characters. The first two sets of numeric digits indicate the Sun Java Plug-in version. The third set of numeric digits indicates the patch number. For example, the clsid value for the 1.3.1_10 Sun Java Plug-in is as follows: clsid:CAFEEFAC-0013-0001-0010-ABCDEFFEDCBA 4. Save your changes to the jsp file. 5. Repeat all of these steps for the Administrator.jsp file.

How to view satellite image during navigation with google maps iphone 5

I am a new iPhone convert. I switched from the HTC EVO that used Google Navigation. Google Navigation in Android allows the user to see the image of the map during actual navigation to be the satellite view instead of the standard map view. I downloaded the Google Navigation App to my iPhone 5 but I can't get the map to switch to satellite view. I can only get the satellite view up for the overview map. Once navigation starts, the screen pops back over to the standard map view. How do I view the satellite image during navigation? Please help....

I don't believe that is an option in Google Maps for iOS.

How to setup SMBX client for work with Windows 2003 server's shared folders?

Dear community,
Some folders within shared folder on Windows 2003 Server is not visible for MacOS 10.8 client.
How should I set up SMBX? Is there manual?
I know, there is simple solution to type exact pathname (with those invisible folders) in connection dialog, but it is not usefull for me.
Thank you in advance

Hi,
Please remove the 3 non-exists DC from environment using the metadata clean-up process using script from below article. then manually delete the records from DNS management console as given below.
https://gallery.technet.microsoft.com/scriptcenter/d31f091f-2642-4ede-9f97-0e1cc4d577f3
Manual steps to clear the records.
Dnsmgmt.msc [Dns Management]
A.Expand the forward lookup zones\_msdcs folder
i. Make sure only the actual domain controllers are listed, delete wrong Alias recordsremove wrong name server records
ii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_sites_\sitename\_tcp] > delete incorrect _ldap and _kerberos records are listed.
iii. Select the container [forward lookup zones\_msdcs.domain.com\dc\_tcp] and delete incorrect _ldap and _kerberos records
iv. Expand the [forward lookup zones\_msdcs.domain.com\domains\guid\_tcp] and delete incorrect _ldap entries
v. Select [forward lookup zones\_msdcs.domain.com\gc] – delete incorrect HostA records
vi. Expand the [forward lookup zones\_msdcs.domain.com\gc\_sites\sitename\_tcp] – delete incorrect _ldap entries
vii.Select the [forward lookup zones\_msdcs.domain.com\gc\_tcp] – delete incorrect _ldap entries
viii. Select the [forward lookup zones\_msdcs.domain.com\pdc\_tcp] – delete incorrect _ldap entries
B.Expand the forward lookup zones\domain.com folder
i.Delete Host(A) records of dc’s which are non-existant.
ii.Correct the NameServer (NS) records
iii. Follow steps similar to ’ A ii ‘ >> ‘ A viii’
· Dssite.msc [Sites and Services]
A.Expand the [Sites\Sitename\Servers] – delete incorrect server’s
B.Delete incorrect subnet configurations [Sites\Subnets]
C.Delete incorrect site links [Sites\IP]
· Make sure the domain controllers are pointing to the correct dns servers in tcp\ip settings.
· Force replication – ‘repadmin /syncall’

How to setup hard drive shock protection with applesmc?

Hi,
I've read that the applesmc module allows to read the motion sensors in intel macbooks. I've checked with lsmod and the module is loaded in my machine.
How do I make sure that shock protection is enabled? AFAIK, there should be a daemon running that reads the sensor data (using the files exposed by spplesmc). Which daemon would that be?
Thanks.

No, I'm not really sure. I'm assuming that's something that the OS needs to take care of since there are posts and articles that talk about how to set it up (All the ones I've found are for the IBM thinkpads)
http://www.thinkwiki.org/wiki/Active_Protection_System

How to setup the perfect develop envorinment with Corda Builder

All,
It has been a while since I programmed with JSP/Java. Three years ago I developted some custom web pages within JSP and Eclipse. The webpages queried on a SQL DB. The results were populated via a Corda Builder Chart(PCXML script) in a JSP webpage.
Now, I have to develop a kind of the same page but the JSP variables (date) do not show up in the porlet.
<%@ page contentType="text/html; charset=UTF-8" %>
<%@page contentType="text/html" *import="java.util.*" %>*
<?xml version='1.0' encoding='ISO-8859-1' ?>
*<%java.util.Date d = new java.util.Date();%>*
<Chart Version='4.40.00' BorderType='None' BorderColor='#99ccff' FitInBounds='False' CollisionProtection='False' BGGradientColor='#4d718e'>
 <Textbox Name='Title' Top='6' Left='4' Width='114' Height='23' CVersion='7'>
 <Properties ShadowStyle='Fade' HJustification='Left' Font='Name:Lucida Sans; Size:14.0; Style:Bold; Color:#003333;'/>
 <Text><% d.getDate() %></Text>
 </Textbox>
 <Graph Name='graph' Top='49' Left='20' Width='427' Height='263' CVersion='7' Type='Line Bar' SubType='Basic'>
 <Legend Name='legend' Top='50' Left='451' Width='80' Height='110' ZIndex='2'>
 </Legend>
 </Graph>
 <GraphData Name='graph' Method='Replace'>
 <Categories>
 <Category Name='Week1'/>
 <Category Name='Week2'/>
 </Categories>
 <Series Name='Balans'>
 <Data Value='54'/>
 <Data Value='75'/>
 </Series>
 <Series Name='Inkomsten'>
 <Data Value='92'/>
 <Data Value='60'/>
 </Series>
 <Series Name='Uitgaven'>
 <Data Value='68'/>
 <Data Value='87'/>
 </Series>
 </GraphData>
 <Project HTMLHeight='330' HTMLWidth='540'>
 </Project>
</Chart>Problem:
The comes up perfectly but the date and database connection(didn't add that to this script because does not make sense). Does anyone have an idea based on this code what i do wrong? I use TomCat, developed the code in Eclipse. Additionally, what would be the best configuration (headlines) of developing the JSP pages?.
It's for you guys an easy case but it would really help me.
Jeroen

Well your main problem is that you are using scriptlets, those have been out of date for at least 10 years now. Anyway:
<% d.getDate() %>should be
<%= d.getDate() %>The next time you don't know why something isn't happening, you are best of looking up the servlet java code that is generated for the JSP page. Where this file is put depends on the server, Tomcat and JBoss for example put it inside a 'work' subdirectory. The reason why I advise this is because the servlet source file is what is executed by the server, and is thus a better source for problem finding than the JSP source.

Outlook not an option during synchronization with Curve

I am having same problem..... all my calendar and contact information is in Microsoft Outlook..... I'm trying to synch a curve with Microsoft outlook which is a part of my Office 2000..... And I'm using version 4.5 of Blackberry Desk Manager....
when I try to synch calendar I only get three choices: Yahoo, Ascii export, and "none"...... (but no Outlook)... when I try to synch with contacts, I again fail to get outlook as option, only output express which is my personal e-mail server, but does not contain my calendar and contact data that I loaded via desktop software from Palm (I'm trying to replace my Palm Zire 31 PDA with the curver)...
I sure need help I appreciate all replies plus an answer to this question: does blackberry have a tech support number for individual questions and help?
TarHeel who is greatly puzzled..... Do I have to turn in my Curve which I love exect I have so much data in OUtlook that I must have on my handheld even if I have to return to a Palm based phone... (PLs say I don't have to do this)
EDIT: Changed title.
Message Edited by MohA on 05-08-2009 03:19 PM

Outlook 2000 is not supported by version 4.5 of the Desktop Manager.
You will have to use a previous version of the Desktop Manager.
To get the latest version of the Desktop Manager that supports Outlook 2000, look at the top of the current page and click on the SOFTWARE button and find your way to the Desktop Software page.
Message Edited by Xandrex on 05-09-2009 10:09 PM
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

How to setup ORCLDEFAULTPROFILEGROUP on during synchronization with AD

Similar Messages

Maybe you are looking for