How to setup PDA module for wince
I want to develop a PDA that with some measurements or analyze function, so i choose the Labview for PDA module.
My hardware is ARM s3c2440(Samsung), OS is WinCE5.0. Software: LabView7.1
I have developed the VIs for PDA module on the Pocket PC. I remember that I had to install EVC++ and Pocket PC SDK before I setup the PDA module.
So I thought after I installed the EVC++ and the SDK for my 2440 board, I could setup the PDA Module as before. However, I found that the installation still have to find the Pocket PC SDK.
How can I setup the PDA module with my 2440's SDK?
Another question, can I develop the Labview PDA module in the enviroment of ARM s3c2440+embedded Linux(qtopia)?
Thanks for have read this question, waiting for your guides.
Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude
Similar Messages
-
How to setup the RV120W for quickvpn
Hello,
The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
Thanks for any helpUser Guides for thee rv120W are here:
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
and theres some more stuff over on my site:
http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/ -
How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
Below are the Windows 8.1 client IP Configuration
C:\Windows\system32>ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 3:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
Connection-specific DNS Suffix . : home
Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
IPv4 Address. . . . . . . . . . . : 192.168.1.5
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.home:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : home
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
Default Gateway . . . . . . . . . :
Tunnel adapter iphttpsinterface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
Default Gateway . . . . . . . . . :
Below are the IPConfiguration details for Direct Access server
C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
IPv4 Address. . . . . . . . . . . : 10.192.1.25
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
Default Gateway . . . . . . . . . :
Tunnel adapter 6TO4 Adapter:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Tunnel adapter IPHTTPSInterface:
Connection-specific DNS Suffix . :
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
Default Gateway . . . . . . . . . :
ipconfig exited on MURA01 with error code 0.
Below are the IPCONFIG Details for SCCM Server:
C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
IPv4 Address. . . . . . . . . . . : 10.192.1.30
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
ipconfig exited on sccm01 with error code 0.
What will be the IPV6 values to configure boundary?Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
How to setup SSL cert for SharePoint apps in a three tier farm with nlb
I am having trouble understanding how to setup the SSL certificate on SharePoint apps or in general its configuration
Please check the below thread..
https://social.technet.microsoft.com/Forums/sharepoint/en-US/53465d30-10b2-48c9-9541-5ade738156b4/how-to-setup-ssl-cert-for-apps
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh -
How to setup Data guard for SAP database?
Can someone please tell me how to setup data guard for SAP databases?
Thanks,
AbhiHi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay -
SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
Hello IDM-experts,
where can my customer find information about
SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
Customer situation description:
The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
SSO access to the Abap systems via the SAPGui. See screenshot as an example.
Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
this or if it is possible via SAP IDM 7.2.
You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
Kind regards,
DanielaDo you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
Thanks
Tim -
Can anyone tell how to setup audit trials for opm
HI,
how to setup audit trials function available in sys admin for OPM modules.
can any one provide steps to hav audit trials.Does the jaxp direcory have a jaxp.jar?
Add jaxp.jar to Classpath. -
How to setup my airport for music streaming
Hi all
I would like to use my iPhone and or iPad to stream music from Pandora and Spotify to my 5.1 (Wired) Speakers.
This question is similiar to this thread https://discussions.apple.com/thread/4153687 however i wanted some clarity and thought best to start a new discussion before pulling my hair out doing this the wrong way.
I have an unused Airport Express basestation (A1408) My current home setup is as follows:
Modem Router: (Netgear DGND3700) N600 Wireless ADSL2+ Dual band Gigabit
Home Theatre Computer: Windows 7 (Cat6 LAN Ethernet connection) NO LAN port
AV Reciever: (Onkyo TX-SR309)
5.1 Speakers: Wired connection to AV Receiver (NOT Airplay capable)
Laptop: Windows 7 (Cat6 LAN Ethernet connection)
My question is how to setup the airport, i understand it can be used to enable airplay streaming of music over the existing WiFi network, as these music streaming apps download and play music concurrently i would not want to have to switch between to two seperate WiFi networks. Should i plug the airport into the HTPC? I would need to purchase a LAN Splitter as the only LAN socket is already taken up with my cat6 connection. OR would i plug it directly into the modem/router? This second option is prefereable.
I have attached an image of my setup below. Any advice would be great, Regards Steve
[URL=http://s1293.photobucket.com/user/steve7677/media/homesetup_zps63eaf61c.jpg.html][IMG]http://i1293.photobucket.com/albums/b599/steve7677/homesetup_zps63eaf61c.jpg[/IMG][/URL]Still slightly confused, with the link you provided i chose scenario 2. All the other secanrios instructed i connect the airport express to my home stereo or powered speakers. As i dont have an aiport express only an airport extreme there is no audio jack and cannot connect it to the stereo/speakers.
option 2: Connecting to an existing Wi-Fi network as part of a roaming network
Ensure that the AirPort base station Ethernet cables are connected as above
I have done this and conected it via ethernet cat6 to the modem/router
Launch AirPort Utility 6.1. The Assistant will automatically configure the Roaming network
Im using windows 7 and cannot find this version of aiport utility, only 5.6.1 - The message comes up: Aiport utility was unable to find any airport wireless device. I am running this utility on my win7 HTPC (which is connected to my modem/router via cat6 LAN) The airport light is blinkng amber.
would you reccommend a hard reset of the airport? or can you provide a link for AirPort Utility 6.1.?
Regards -
How to setup a KDC for Kerberos Authentication
Hi,
I am new to Kerberos. I am trying to execute the sample codes on Sun site but i am not understanding how to setup a KDC.
Please help me.
Regards.Hi Alexander,
create the proxyauth.txt file in the roor directory of you MI Client installation and add the following paramters to the text file:
MobileEngine.Sync.Proxyuser= Username for Proxyserver
MobileEngine.Sync.Proxypw=Password for Proxyserver
Regards
Tahran -
How to use PDA module to access the database of PDA?
I want to develop a program which can access the database of PDA by the pda module. give me some advice!
thanks!It may help you to know how I add JARs
1. I open my Project (myProject)
2. I Mount the JAR to the FileSystem (like mypackages.jar = which includes com.mus.de.myClass.java)
3. I Mount the File to the FileSystem (like c:\..myfiles..\myProject)
3.1 I add the File to my Project
4. I select File | New -> Classes | Main
4.1 I typed "import com.mus.de.myClass.java" to refer to this package.
4.2 I called some of the public methods
thats it
Andreas -
How to create function module for getting customer name
Hi Experts,
How to create function module? when in import parameter kunnr values to be passed it must give name1 details according to the customer number...
how to write the logic in source code....
Regards,
Thiru. R1. First of all create function group.
2. Create function module using this function group.
3. If only one kunnr is needed at a time, create import parameter for it. But if many kunnr to be entered at a time,use table.
4. Fetch name1 for each kunnr from KNA1 table.
"->> if many kunnr
if not t_kunnr[] is initial.
select kunnr as kunnr name1 as name1
into table t_kunnr_name1
from kna1
for all entried in table t_kunnr
where kunnr = t_kunnr-kunnr.
endif.
sort t_kunnr_name1 by kunnr name1.
delete adjacent duplicates from t_kunnr_name1 comparing kunnr name1.
table t_kunnr_name1 will contain kunnr and its name1.
I hope logic is clear for you now.
Regards,
Aparna -
Newbies need advice - How to setup PDA to connect to SAP server
Hello Guys,
I really need your information about how to connect PDA to SAP server, I got some information that we can use the SAP Console, but really i have no idea at all.
I really need you help guys, Thank In Advance
RegardsSurya,
You can download the MI documentation from
http://service.sap.com/instguides
for configuration of MI server and client components.
For more MI documentation, you can go to:
http://help.sap.com/saphelp_nw04/helpdata/en/a7/893a5889e08b41b615688b1a93b559/frameset.htm
Thanks.
Peter -
How to setup Anonymous TP for Immediate ACK for HL7
All,
Can someone give me steps to setup Anonymous TP for Immediate ACK for HL7?
DipalRamesh,
I follow the concept, I am not quite sure about the steps. I am outlining the steps as per my understanding correct me If i am wrong.
- update existing TP "A" for ex to remove business action for ack.
- update exiting TP "A" for ex to disable FA
- Create Anonymous TP with business action Generic Ack and validation off.
- Set oracle.tip.adapter.b2b.defaultTP = Anonymous in tip.properties
oracle.tip.adapter.b2b.hl7.singleDC=true
oracle.tip.adapter.b2b.hl7.genericMessageType=ACK
oracle.tip.adapter.b2b.hl7.immediateAck=default
Would this be it? or am I missing any steps?
I am still not quite sure how would b2b know to respond to incoming message from TP "A" and send the MSH.10 value in ACK and datetime format we need.
Please let me know.
Dipal -
How to setup separate rington for each contacts?
Will someone point me to a tutorial or show me how to setup separate ring-tone for each contacts?
http://support.apple.com/kb/HT1413
Assign a ringtone to a contact
From Phone, tap Contacts and choose a contact. Tap Ringtone and choose a ringtone. When that person calls, you hear that ringtone. -
ECXpert3.5- How to setup HTTP-SSL for xml protocol
Hi,
We are using ECXpert3.5 on Solaris box. One of our Trading Partner want to communicate through HTTP-SSL and we are doing XML/EDI mapping. Could you guide us what steps we need to take care to implement this.
How the external system will talk to ECXpert for transferring files.(We need the syntax for the URL). Could you suggest how to setup the HTTP SSL for XML protocol to receive xml files from remote system.
Thanks in advance for your help!
Regards,
Ravi.Hi,
We are using ECXpert3.5 on Solaris box. One of our Trading Partner want to communicate through HTTP-SSL and we are doing XML/EDI mapping. Could you guide us what steps we need to take care to implement this.
How the external system will talk to ECXpert for transferring files.(We need the syntax for the URL). Could you suggest how to setup the HTTP SSL for XML protocol to receive xml files from remote system.
Thanks in advance for your help!
Regards,
Ravi.
Maybe you are looking for
-
i bought a new iphone 4s 64 gb from a nearby store in ma hometown ...my iPhone flashed a blue screen then rebooted more than twice in the same day, I then updated to 6.13 (lastest IOS version )...still the problem continues..... wat should i do to s
-
Connecting 2nd ipod nano to computer
hi everyone! this is my first post. i had my ist nano stolen. just purchased a 2nd one. my question: what problems will i encounter transferring my i tunes to the new nano? beinga senior citizen would appreciate ez responses. should i initially charg
-
Conversion indicator in planned order
Hi, I have one query with Conversion indicator in planned order.I maintained procurement type X(Both) in MRP2 for a assy say Y. Since Y is maintained in header say X.Also Y has its own BOM with active status 1. I took MRP run for header X, I found t
-
Multiple servers -- multiple Cache (JWS)
Hi, I'm working on a Kana Software deployed with Java Web Start. Each time we change the web server (crash or ...) we have to download all soft components (jar, Jre ...) even if the user has already exactly the same files on his machine but under an
-
i'm try to connect to EL Design studio , but this msg was apper. [SERVERERROR] Error from Server: ORA-01017: invalid username/password; logon denied Host String: oraclebam Server Type: Oracle User Name: orasagent Information from server: 1017 0 oracl