How to setup pin for national or international calling on 3905 phones

Hi,
I have this new project on CME along with IP phones 3905.
I was just trying to find if there is any work around or scripts that i can use for calling national and International number using a pin.
Any help in this regards will be appreciated.

Hi Zekeria,
Thank you bro.
What i failed to understand here is that will everyone have same password or can we keep unique passwords for each user. 
I understand that this password or pin will work on all the phones but i would like to know can it co-exist with after-hours pin??

Similar Messages

  • HT1688 Is there any App for blocking the International calls on my phone?

    Is there any App for blocking the International calls on my phone?

    No.
    For security reasons, 3rd party apps don't have access to private iPhone APIs which such an app would require.
    You want to stop being able to place such calls or stop receiving such calls?
    If the latter, try stopping it at the source by contacting your carrier.

  • How to setup variants for webdynpro report in ABAP? Help!

    Hi Experts,
       I have a webdynpro for ABAP report with selection screen. 
       How to setup variants for webdynpro report in ABAP?
    Thanks
    Gopal

    Hi Gopal,
      There is no concept of Variant in Webdynpro ABAP. But in our project we have some tool to do that. Its not release to the client I think. In my scenarieo, We create the Screen variant and program name will be supplied to the tool that will generate the ouput in PDF and Selection screen in One view. But the same is not avilable .
    If you want the same concept in Webdynpro ABAP, you need to go for Dynamic programming only. This is the only option is avilable.
    Warm Regards,
    Vijay

  • How do I sign up for a temporary international calling package for my vacation to the BVI?

    How do I sign up for a temporary international calling package for a vacation in the BVI?

    Of course it could be MUCH cheaper to just purchase a local SIM card to use in your phone when you get there. The rates will be less than what you will be paying to Verizon, especially if you plan on using much data or making many calls.
    One drawback of this would be if anyone wanted to get in touch with you, you would have to give them the local number for the SIM card you purchase.

  • I am receiving calls from 911,917,918,919,etc. I believe these are international calls from mobile phones in India. How do I stop/block them?

    I am receiving calls from 911, 917, 918, 919, etc. I believe these are international calls from mobile phones in India. How can I block/stop them?

    Unwanted calls are never pleasant! To confirm, are these calls only coming from 3 digits numbers? If coming from 10 digit number we offer 5 free blocks via https://wbillpay.verizonwireless.com/vzw/nos/safeguards/SafeguardProductDetails.action?productName=callMessageBlocking. While not the most convenient, we also offer the ability to change your phone number free via http://www.vzw.com/myverizon.
    Thank you,
    YaleK_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • How do i know for sure if someone is accessing my phone and viewing my activities which i think are private

    how do i know for sure if someone is accessing my phone and viewing my activities which i think are private

    Why do you think this?
    There are no tracking software for a non jailbroken phone.
    do you share an apple id with someone?

  • How to setup QoS for IP/Mac Address WRVS4400N

    I need some help setting up QoS for two Cisco/Linksys devivces on my network. 
    Network devices are Comcast SB6120 modem into WRVS4400n (v2.0.2.1 firmware) that divides into one 24 port gigabit Netgear unmanaged switch, 1 port into AT&T Cisco Microcell, 1 port to HP Officejet 7700 wired printer.  Unmanaged switch has approx 10 devices attached (including another 8 port unmanaged gigabit switch).  3 static leases are defined for the network for three devices (HP OJ 7700 printer, Cisco/Linksys PAP2 VOIP adapter, windows home server v1.  DHCP is handled by WRVS4400n.  Comcast service provides 12mbps of service upstream, 4mbps downstream.
    Need to setup QoS for AT&T Microcell and PAP2 VOIP adapter.  The real issue that I can't figure out how to configure is IP based priority access.  I can do rate control for an IP address but can't figure out how to specify priority control for an IP.
    Here are my the current config questions:
    1.  Bandwidth management page:  For the microcell device plugged into port 1, do i set the default CoS to 4 or 1?
    2.  Bandwidth management page:  Should the bandwidth management type be set to priority?  I assume yes since I need to define the UDP/TCP ports for priority.  The major issues here are
    a) one of the ports the Microcell uses is secure https (TCP 443) which is could also be used by any other internet device. 
    b) can't specify priority for the PAP2, since it's behind the unmanaged 24 port switch
    3.  QoS setup page:  Do I need just 2 queues (one for the port ID for the Microcell and one for the IP address of the Linksys adapter)?
    4.  QoS setup page:  I assume I need to define DSCP for the unmanaged switch but not sure how to tie a queue to an IP address
    4.  QoS setup page:  Shoud priority 0 be set for the most important queue (microcell) and the priority 1 CoS be for the VOIP adapter?  Again, not sure about how to define priority by IP address.
    5.  DSCP setup page:  As far as I can find, there's no documentation on how to setup this page.   

    That's what I do. I keep it simple, one calendar, one set of contacts.
    iCloud is really the simplest way to go, as it will sync your (eventual) single Contacts and Calendar across all your devices.
    I would:
    Figure out which single calendar (in Calendar.app) and contacts (in Contacts.app) that you want to keep.
    I'd make a backup of each one. For example,
    in Contacts, File > Export... > Contacts Archive...
    in Calendar, File > Export... > Calendar Archive...
    Make a backup of the other calendar events and contacts that you want to save.
    delete all the contacts and calendars from your phones and your iPad.
    add the contacts and events from the backups to the single calendar in Calendar.app and your contacts in Contacts.app on your iMac. There is probably some way to export the contacts and events you are adding, and then combine them, but you could also just add them manually.
    Then when you configure all your devices for iCloud, they will be all synced automatically.
    Message was edited by: arthur

  • NewbieQuestion: How to setup OCCI for Visual C++ 6

    I'm new to OCCI and Visual C++, Please help to illustrate how to setup OCCI environment for Visual C++ 6
    Thanks in advance

    Check make.bat under %ORACLE_HOME%\rdbms\demo on how to compile OCCI programs in Windows. OCCI samples can be found in %ORACLE_HOME\rdbms\demo and in :-
    http://www.oracle.com/technology/sample_code/tech/occi/index.html
    Regards,
    Shankar

  • Two printers with different paper sizes. How to setup defaults for each?

    I have two printers connected to my beloved Mini: Samsung ML-1610 & Epson AccuLaser C1100.
    First printer uses American Quarto US Letter paper.
    Second one - European A4.
    Every time I try to print anything on either of them I receive a message from printer driver that paper size mismatched. Further more either printer will wait until I press buttons on them to "proceed". Which is very annoying to say the least.
    How can I setup defaults for every printer in Mac OS Leopard? If I use printer preferences dialog it will setup either size for both printers rather than for each its own.
    Please advise.

    PAHU wrote:
    You cannot do exactly what you want from a user interface perspective. I am not sure if such a thing is possible by making changes to hidden files. I certainly haven't heard of it but it may still be possible.
    From what I have seen, the page setup dialog is independent of the print dialog. If you set the 'Format for' to one printer, a then choose a different printer when you print, the previous settings won't apply.
    You could see if the printer set to A4 supports automatic conversion of LTR to A4. Then at least it won't ask for attention when you send a LTR page to it. Otherwise I think your only option is to check before you print that you have selected the correct paper size for the printer.
    PaHu
    That's freaking ridiculous!!!
    You've got to be kidding me... right?
    Even MacOS 8 could do this.
    Like it's horrible for me because I print a lot of photos. So I set my default paper type Format for: Canon MP610 series, Paper Size: US Letter (borderless). But then when I go home and print web pages or text documents on my Apple LaserWriter 16/600 PS, then it still remains set to Format for: Canon MP610 series. The freaking OS knows what printer I'm using; why would it remain formatted for the other printer even though that will cut off the edges of all my prints (since the LaserWriter does not do borderless printing) -- and not even warn me?! I just wasted 30 pages!
    I cannot tell you how preposterous it is that a modern OS like Mac OS X cannot even get a simple thing such as printing correct. How could they screw up PRINTING?!
    -Jon

  • How to setup CTS+ for BODS 4.1 systems

    Hi all,
    I am trying to setup CTS+ for BODS systems to transport the objects from dev--> QA---> Prod.
    I Couldnt find any document which explains about CTS+ for BODS systems.
    I have some knowledge on how CTS+ works and worked on CTS + for EP and PI.
    Can someone let me know the steps involved in setting up CTS + for BODS 4.1 systems.
    Thanks
    Vimal.SMR
    Message was edited by: Andy Silvey

    Hi Vimal,
    see if this OSS Note helps:
    1762987 - How to configure LCM with CTS+
    Kind regards,
    Andy.

  • How to setup SSL for Business Objects

    Dear colleagues,
    can you help with the following issue: we want to setup SSL for BO and have dedicted information for the implementation of certificates and know that sapcryptolib needs to be used. But there is no information provided how to inform BO about the location of the sapcryptolib. Can anybody provide a hint for this? Many thanks in advance.
    Best regards,
          Detlef Kreiss (HP Outsourcing services)

    Detlef,
    The SAP Crypto library is not required if you are simply trying to secure the webserver using SSL.
    Securing IIS (.NET infoview, or IIS fronting a Java application server) is pretty simple as you would follow the same steps to SSL secure it as you would any IIS server (there is an add certificate button in the properties of IIS).
    If you are using a Java Application server solely and want to SSL secure that, there is an SAP note to describe the steps required to add an SSL certificate to the (Tomcat) Java keystore.
    Please see:
    1299147 - How to setup SSL on Tomcat in Business Objects Enterprise XI 3.1?
    https://bosap-support.wdf.sap.corp/sap/support/notes/print/1299147
    -Brian

  • How to setup dreamweaver for synchronizing  website?

    Hi, I'm trying to setup dreamweaver 8 in a way that mimics my
    online website. The problem I am having is that on my real sites'
    server I have placed most of the files outsite the public root
    (security reasons), and I'm not sure how to setup dreamweaver so I
    can synchronize with this. I am running a WAMP configuration for my
    test / development machine.
    Online website structure:
    some_folder
    -source code
    - includes files etc..
    public_html (document root)
    - html files
    -images
    -css
    An example of how my apache virtual host is setup
    Document Root: C:\mysite\public_html //This works fine...
    If I setup a site in dreamweaver that uses C:\mysite as the
    root, the setup resembles the online one. But there is a problem
    with this because it uses C:\mysite as the "document root" whereas
    the folder C:\mysite\public_html should be the document root. Now
    if I change my document root to C:\mysite\public_html then I don't
    have access to any of the files above this directory... I'm kind of
    screwed with each option I take...

    Here are the email server settings that work for me on iMac or iPad using Mac Mail program.
    Verizon changed to different email server.
    Make sure password for account is correct by resetting password:
    Reset password by clicking "I cannot access my account link" on page or login below
    https://login.yahoo.com/config/login?.intl=us&.partner=vz-acs&&.lang=en-US&.intl =US&.done=http://hom...
    Enter username here to reset password :https://signin.verizon.com/sso/forgotflows
    Passwords must match for verizon yahoo & verizon account.
    email server settings:
    Example
    Name: john smith
    email address:[email protected]
    user name: john smith (Do not use full email address here)
    Incoming Mail Server: incoming.yahoo.verizon.net
    SSL: on (Port 995)
    Authentication: Password
    Outgoing Mail Server: outgoing.yahoo.verizon.net
    SSL: on (Port 465)
    Authentication: Password
    user name:johnsmith
    Password: current password for account
    Save all settings and check for new email. Good luck.

  • How to Setup RDS custom property when internal and external domain name space is different

    Hi All
    I am setting up RDS for customer
    My internal domain name is domain.local and my external domain is domain.com
    I came across below PowerShell cmdlets on some blogs because my internal and external name space are different
    Set-RDSessionCollectionConfiguration –CollectionName QuickSessionCollection -CustomRdpProperty “use redirection server name:i:1 `n alternate full address:s:remote.domain.com”
    In above command, remote.domain.com points to which host?
    Is it pointing to RD Session Broker
    OR
    Pointing to RD Session Host servers
    I am not sure what above command will do exactly ?
    Any help will be highly appreciated
    Thanks Best Regards Mahesh

    Hi,
    It all depends who is accessing the RDS Solution.
    If you have a large BYOD or large number of external users, it would be better to use a public certificate.
    Have a look at the following script which will simplyfy the configuration of the RDSH hosts with certificates.
    http://ryanmangansitblog.com/2014/05/20/rds-2012-rdsh-certificate-deployment-script/
    You can use a custom RDP property to hide the Session host names.
    Have a look at the following article on configuring certificates:
    http://ryanmangansitblog.com/2013/03/10/configuring-rds-2012-certificates-and-sso/
    Ryan Mangan | Ryanmangansitblog.wordpress.com | Help keep the forums tidy, if this has helped please mark it as an answer

  • How to setup DBI for SCM?

    I need DBI setup guide for SCM & DBI develpment guide (i.e. Dashboard,Ad-hoc reports,DrillDown) one of our biggest client POC?
    Regards,
    Mukarram

    You probably want Fusion Intelligence for EBS in order to take advantage of the integrated Siebel Analytics Dashboards:
    Oracle Fusion Intelligence for E-Business Suite Implementation Guide
    http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120fieig.pdf
    Install and configure OBIEE per the installation guide below:
    Oracle® Business Intelligence Infrastructure Installation and Configuration Guide
    http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31765.pdf
    Otherwise, use the DBI installation guide for setting up DBI:
    Oracle Daily Business Intelligence Implementation Guide
    http://download.oracle.com/docs/cd/B40089_10/current/acrobat/120dbiig.zip
    If you are using ASCP in your SCM environment, there are some cool new OBIEE based Control Centers in the controlled release of 12.1 for ASCP:
    12.1 APS Installation Notes
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=727535.1
    Oracle Advanced Planning Command Center Release Notes. Release 12.1
    http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=566094.1

  • How to setup comis. for future account

    our local cuurency is JPY, we configured a future product type 903, the commission is 500 JPY per lot for future, if we buy 3 lots, then it will be 1500 JPY
    anyone know the steps to setup commission for future accounts

    Hello erinfromla,
    It sounds like this article will be useful for you.
    iCloud: Set up iCloud Mail on your devices and computers
    http://support.apple.com/kb/PH2621
    Make sure that you're setting the account up through System Preferances:
         "2. Choose Apple menu > System Preferences, then click iCloud and sign in with either your Apple ID (the one you use with iCloud) or your @icloud.com email address."
    That should get you up and running.
    - Griff W.

Maybe you are looking for

  • Search bar in save as dialog box

    I just updated to windows 7 and realized that when I go to save a document I don't have the "search bar" avalable? Is there a way I can get that in the save as UI? Or do I have to manually find my folders on my network?

  • Running a 27 inch monitor over Dual link DVI-D

    Hi all I have recently acquired a 27 inch monitor to use with my Mac. My Mac is a 13 inch 2011 Macbook Pro. I am connecting using the Apple Dual Link Adapter. When I connect and boot-up, I get the grey background with the Apple. No problem. But when

  • Flex 4 Chart title won't move when positioned

    Hi, I have an issue with my horizontal chart title in my Flex 4 bar chart--it just won't move when I try to position it someplace other than the default (which is center). I followed the example in the livedocs: http://livedocs.adobe.com/flex/3/html/

  • Can't run on Windows XP ????????

    This seems a crazy limitation. There are still a huge number of XP users. I hope this gets sorted before release.

  • How to make clip "skip" frames?

    I have a clip I would like to move jerkily, in other words, repeat a given frame 3 times, then skip the next two frames and repeat the third frame three times, etc., etc. What's the best way to accomplish this (without doing freeze frames manually)?