How to setup ProtectLink Gateway between SA540 and Trendmicro's InterScan Messaging Hosted Security?

After license activated, adding the relevant domain name in domain management webpage under Trendmicro's "InterScan Messaging Hosted Security", why the status is showing "verifying" only and the gateway function seems not to be activated. Where problems and where missing steps?

Similar Messages

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

How to setup default gateway in a DHCP client. The default gateway will be the Ip address of the server that has RRAS installed, hence routing cabalities.

Hi Bill,
Thank you for replying back...Yes, I was actually asking how do you set the default gateway address on the DHCP server?,
I believe I got the answer below:
To configure the DHCP default gateway option Click Start, point to Administrative Tools and then click DHCP. In the console tree, expand the applicable DHCP server, expand IPv4, and then right-click Scope Options Click Configure Options, check 003
Router, type the applicable Server name and IP address, and then click OK.
Thank you

How to establish the connection between crm and r/3

Hi,
Sorry for posting this question in this forum, i did not find any CRM forums.My question is,How to establish the connection between CRM and R/3...in my office i installed standard alone CRM system,but it is not talking to R/3.
Could any one tell me where to find adapters and plugins for this.
Thanks in advance.
Ajey

Hello Ajey,
in the case you mean the connection between R/3 and SAP CRM you should read the Best Practice Guides:
B01: CRM Generation
C71: CRM Connectivity
B09: CRM Replication
from http://help.sap.com/bp_crmv240/index.htm. There is a CRM Forum at http://www.sap.com/community/ and also at http://www.sapfans.com/.
Regards
Gregor

How can I transfer photographs between Revel and Photoshop (CS3)?

How can I transfer photographs between Revel and Photoshop (CS3)?
any Ideas?

Hi poetryplease,
Unfortunately, there is no Creative Cloud connection between CS3 and Revel. You can upload your images that you have edited, etc, in Photoshop from your desktop into Revel or download your Revel images to your desktop then open in Photoshop.
Glenyse

How the relation is maintained between BOm and dependencies

Hi Gurus,
Please tell me how the relation is maintained between BOm and dependencies

First you need to create object dependencies (CU01). Then these dependencies are to be assigned to BOM items in bill of material create / change mode(CS01/CS02). For this you need to select a component / BOM item and click 'Allocations' button.(Select BOM item + cntr F1)
Pls reward points if found suitable.
Thank you.
Umesh

How to create shared folder between mac and windows

how to create shared folder between mac and windows

Us ean external drive formatted FAT32 or ExFat. Both OSx and Windows can read/write to the drive and both can use the same data files as long as you have a program that can open and save these files. For example, Word running both on OSx and on Windows will be able to work with the same document on the external drive.

HT2729 How do I switch movies between sd and hd on my computer

How do I switch movies between SD and HD.

System Preferences > Display > Arrangement
Drag the white Menu bar from the main screen to the second screen.

How to find the relation between PAY_ELEMENT_TYPES_F and GL_CODE_COMBINATIO

Hi, could someone tell me how to find the relation between PAY_ELEMENT_TYPES_F and GL_CODE_COMBINATION tables
that is because as you could know PAY_ELEMENT_TYPES_F holds the definitions of elements in Oracle HRMS and i need to find the accounting code of each element.
Thanks

Hi;
Please check e-trm site for table relation,integration,explanation etc..
etrm.oracle.com/
Regard
Helios

How can I stop my childs ipod and ipad receiving same messages

how can I stop my childs ipod and ipad receiving same messages, they were both set up to the same email account and itunes account. I have just set up a new itunes account for my daughters ipod and changed hers to the new account but my ipad still seems to be getting the same messages from her ipod which is what I wanted to avoid, any suggestions ?
Mel X

i changed itunes and email password. and afew others will that stop the text messages form going to it.

How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

Cross your fingers and hope.
Obviously if there is any big or known threat Apple will send out a firmware fix.
But the TC is designed to be end user simple device. It has no firewall that is visible at any rate. I don't know that it truly doesn't have a firewall but it is not part of the end user controls.
IMO if you have major security concerns that go beyond end device firewall, which is where Apple do put most of the security, since firewall in the router is plainly not a stop to anybody deliberately downloading an infected file or website, and most end users.. do not want a firewall that prevents them using the web like a business does, where only certain ports are allowed. Everything else tough luck.. you are not allowed to use it. Then TC is unsuitable for you anyway.. buy a proper firewall appliance.

How to setup the connection between non-unicode client and unicode server?

hi.
we played the program in 4.6x that call a data from unicode server (ECC6.0) to non-unicode server. ( not played in the unicode server.)
When a program ended that English Character was normal, but Korean Chinease... was unknown text.
I think conversion from unicode to non-unicode is a main reason.
General Notes are issued for the unicode side rfc connection configuration.
but, i want to know how to setup into the non-unicode system to interface with unicode system.
I hope your great answer.

Hi,
For taht you have to deploy korean and chinese langauges seprately on non unicode system.Then try to connect to the unicode system.It will work for you.
Regadrs
Vijay kumar

Setting up an OSX Server as a Gateway between Wan and Lan

Hi there,
I just bought an OSX Server License and know im struggeling to setup my MacPro as a Gateway between my Lan and the Internet.
Im pretty new to these things I´m afraid, so a step-by-step list might help.....
I setup my en0 as PPPoE to my DSL-Modem what works fine.
Then i used the Gateway-Setup-Assistant to configure the DHCP,DNS Stuff....
Unfortunately none of the Clients in my Lan is able to connect to the Internet - the Server has got a connection but doesn´t pass it through somehow, although the Clients in my lan are connected to the Server.
Apple Resource and Help documentation is no help for me cause it just says use the Gateway Assistant and lean back.
I hope theres anyone out there understanding my issue and is willing to help!
Thanks a lot
Jan

Make sure you have the NAT service turned. If you can connect to the Internet from the server, but systems on the LAN can't get out, then NATting is the usual culprit! NAT (Network Address Translation) translates your WAN addresses to your LAN addresses. I've been through setting up OS X Server several times and usually end up doing it by hand instead of using the Assistant. I've seen problems in 10.4 server that when the DSL drops for a period of time for some reason NATting turns itself off. Don't know if Leopard server exhibits the same problem.
HTH.

How to setup batch management in sap and how batch work?

Hi
I hope to check how batch managment work in sap?
If we setup batch management in mm03 for one matieral,
Will the batch number be created automatically or the number should be created first then we scan it?
when we do goods movement for this mateiral, will system automatically select which batch number is smallest then move that one, or we select one mateiral and scan its batch?
How batch management control the first in and fisrt out (FIFO) ?
Thanks
alice

Hi
I think that you have had your question answered so if you are happy with this can you please award points if you want to but mainly can you please mark your question as answered so that it is easier to navigate around the open questions in the forum as the number of pages are growing and growing and it takes too long to go through everything especially if a satisfactory answer has already been given and people like me who want to help will give up and so some people may not get any help.
Thanks for this
Frenchy.

How to find the link between strcture and query technical name

Hi Guru's
How to find the link between Strcture in the query and query technical name. In other way where used list of the structure used in queries?
I know we have table called RSZELTDIR which have the values of strcuture name. from here i do not find any link to query technical name.
Please can anyone help me?
Regards,
Sirisha

Hi ,
For structure and query relationship, the structure has to be a reusable structure( a global one). Then you can right click in on the structure name (in BEX query designer) and select the where used list. You will find all the query names where it is being used.
U can also check out tables RSRREPDIR and RSZCOMPDIR for other query properties.
Thanks,
Amit

How to set up connection between S and C

I want to realize a chat between server and client.
on both side ,there is a textArea to get the information to send to the other.
I know the socket is must be used,but how to set up the data source(from textarea or textfield),and how to store the data?
can some one tell me how to do this?
thanq!

So what are you saying you dont know how to use the textarea and textfield?Cause it is ez to convert that code that dunedinhigh gave you from console to a gui like what you want I think.So here is a link that shows you how to use text component.You learn this then you can put 2 and 2 together.Also check out the java tut page.
http://java.sun.com/docs/books/tutorial/
http://java.sun.com/docs/books/tutorial/uiswing/components/simpletext.html
good luck

How to setup ProtectLink Gateway between SA540 and Trendmicro's InterScan Messaging Hosted Security?

Similar Messages

Maybe you are looking for