How to setup provisioning report rule

Hello, I can understand that you can get configuration status from SPA2102 using a http//server/somedirectory/file.xml, I have tried that but nothing happening. DO I need to handle the POST from the device (how?) or I can only get it after requesting it?
The bottom line is I need help on how to monitor whether a device has downloaded the configuration file from my http server.

I have gone through the guide and manage to make config files and have the devices retrieve them, but the section on report rule is very short and not much is described.
I read somewhere in the provisioning guide that one can purchase Remote configuration (RC) unit from cisco. Any idea how I can do that?
Thanks.

Similar Messages

How to setup PCG Flow Rule Process flow with Business Event subscription

Hi,
How to setup PCG Flow Rule Process flow with Business Event subscription type?
When should Business Events be used?
The latest user guide does not provide ay information on this functionality of Flow rules.
Thanks

You should find it's usage noted in the new PCG user guide on page 3-26 under the heading "Configuring Workflow/Event Rules". This way you can have a Flow Rule call a business event component or a workflow. This would be kicked off within a process flow as one of the steps.
I hope that helps.

How to setup Multi Reporting Currency by SubLedger in Oracle EBS 12.1.3

Hi,
I would like to ask about how to setup (steps) multi reporting currency by Subledger, by Balance in Oracle EBS R12.1.3
Thanks
fn

Hi;
Please see:
Reporting Currency Function With Subledger Option In Release 12 [ID 785385.1]
Hope it helps
Regard
Helios

How to setup a routing rule for a specific file type for the content organizer?

Hello,
how can I set a routing rule for a specific file type, for example for "pdf" or for "docx", for my content organizer?
As standard I can only choose for the rules the content type, name and title of the file uploaded.
Thank you in advance!
JohnyG

Hi Johny,
Based on your description, my understanding is that you want to create a routing rule for a specific file type.
I recommend to create rules with the conditions as the image below shows for the Document content type(for example: .docx files):
Best regards.
Thanks
Victoria Xia
TechNet Community Support

How to setup SSRS reports to run automatically

Hi All,
I am completely new to SSRS. I am currently using Visual Studio Premium 2013 version to develop my SSRS reports.
I've been reading many posts in regard to setting up SSRS reports to run automatically.
I can see on some answered posts that I can use subscription feature of SSRS by going to my report manager-->Select
your report--> goto properties -->Subscription tab.
My first dumb question as a newbie to SSRS is; how and where do I locate my report manager.
Thank you all for your help.

My first dumb question as a newbie to SSRS is; how and
where do I locate my report manager.
Hello,
The "Report Manager" is a web interface to manage & access SSRS reports; see
Report Manager (SSRS Native Mode) and
Tutorial: How to Locate and Start Reporting Services Tools (SSRS)
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to setup Multiple report layouts based on parameter selection

I'm trying to create a report that will be based on the parameter values a user select. There will be 3 different layouts for the report.
Customer
Salesperson
Category
If the user selects one of the three a different layout will be displayed.
This is probably a simple solution but my Reports 6i skills are a little rusty.
Your advise would be appreciated.

Ok so you have a parameter form, and some parameters. In the data model, you can put your 3 queries. In the layout, as Ino said, put all 3 frames that you could possibly have.
The way I would use to choose which query to use is below. Others may have other methods, but I like this.
Ok lets say you have query A,B,C for simplicity. You have one parameter (P_PARAM1) on the form, and the user can choose A,B or C. Based on the parameter, you choose which query to use.
In query A, you would add this line to the where statement:
and :P_PARAM1 = 'A' You add the same lines to queries B and C, but change the letter obviously. So if the user enters A, it will only run query A because that was the parameter selected.
Now for the layout, click on the frame that corresponds with group/query A. You would click F11 or launch the PL/SQL editor, and add the following format trigger (or something similar).
function F_GRP_A return boolean is
begin
IF :P_PARAM1 = 'A' then
return (TRUE);
ELSE
return (FALSE);
END IF;
end;Ok - then add that same logic to Frame B and C, and based on the parameter it will hide or show the frame.
Hope that helps - thats a basic way to do what you're looking for!

How to setup reports in Apps Server 10.1.2.0.0

I know 10.1.2.0.0 does not have oracle reports. I know that 10.1.2.0.2 does have oracle reports. From the docs I have I cannot upgrade 10.1.2.0.0 to 10.1.2.0.2. Is there anyway I can load a new Apps server 10.1.2.0.2 and get it to use the 10.1.2.0.0 meta data and identity infrastructure of 10.1.2.0.0? If this works how would I setup a reports portlet in a 10.1.2.0.0 portal? Anyone have any ideals?

hi Kashif,
just check this thread,
How to deploy Forms/report on Application Server 10.1.3
Regards,
Hamdy

How to setup the drill down on union report

Hi,
I'm setting the union report.
I want to set the drill down to another report.
But I can't setup it.
Would you please tell me how to setup.
Thank you.

Hi Hemlatha
In Crystal Reports, to prevent the ability to drill down into a subreport when published on the Web, add a text object that is filled with blank spaces, created by pressing the 'Space Bar' and 'Enter' for line returns, to eclipse the subreport.
This workaround is applicable only to subreports that does not grow in size. For example, subreports that display only a chart or graph.
Steps to Add a Text Object over a Subreport
1. In the Crystal Reports Designer of the main report, insert a text object over the subreport.
2. Resize the text object to be the same size or a little larger than the subreport object on the main report.
3. Fill the text object with blank spaces created by pressing the 'Space Bar' and 'Enter'. This is necessary because resizing a text object without
the blank spaces will not maintain its size when it has been published on the Web.
====================
NOTE:
You can format the text object with a hyperlink to another report, another file or a URL.
====================
Now, when the Crystal report is previewed on the Web, the text object that fully eclipses the subreport will prevent the ability to drill down into it.
Regards
Girish

How to setup variants for webdynpro report in ABAP? Help!

Hi Experts,
I have a webdynpro for ABAP report with selection screen.
How to setup variants for webdynpro report in ABAP?
Thanks
Gopal

Hi Gopal,
There is no concept of Variant in Webdynpro ABAP. But in our project we have some tool to do that. Its not release to the client I think. In my scenarieo, We create the Screen variant and program name will be supplied to the tool that will generate the ouput in PDF and Selection screen in One view. But the same is not avilable .
If you want the same concept in Webdynpro ABAP, you need to go for Dynamic programming only. This is the only option is avilable.
Warm Regards,
Vijay

How to setup ias 9i to run reports in pdf

Hi,
How to setup ias 9i reports, so that they always can run in pdf format when I call it from my forms????

By setting the defsformat to PDF.
For instance, from browser:
http://testservername:port_num/rwservlet?server=testservername&report=testreport.rdf&userid=testusername/testpassword@testdb&desformat=pdf

How to setup user's rights to modify Windows Firewall Rules?

I would like to have an account in my system that doesn't have any other administrative privileges besides rights to modify the Windows Firewall rules by means of Firewall API. How to setup a minimal set of rights for this account to do the task?
Right now what I see is that if I try to call INetFwRule::put_RemoteAddresses from an account without administrative privileges, the call fails with access denied. There is no means to find out access to what is needed. The call fails even if the process
is run under high integrity level.
I tried to setup global security audit, but there were no relevant events logged.
I tried to monitor the process with procmon, there were no any access denied events logged.
I tried to give the full access for this account to the correspondent registry keys. It didn't help.
I stepped firewallapi.dll in a debugger and found out that what fails is an RPC call to some COM interface proxy. I assumed that probably it is a remote call to some HNetCfg.FwRule method. I tried to add the user account to the HNetCfg.FwRule launch and
access permission ACLs in the DCOM configuration utility. It didn't help either.
Dear Microsoft, why did you do such a simple thing as settings user rights so difficult? Can you reveal the secret what rights and privileges I have to set?
Thanks in advance.
Dei nostra Matrix est.

Here is what I found so far.
The firewall service calls RpcServerRegisterAuthInfo to setup RPC security from FwRpcAPIsRegisterAuthInfo. It happens during registration of RPC interfaces in FwRpcAPIsInterfaceCreate. FwRpcAPIsInterfaceCreate is called from FwRpcAPIsInitialize. And FwRpcAPIsInitialize
is used from FwServiceAsyncStartupRoutine.
After calling FwRpcAPIsRegisterAuthInfo function FwRpcAPIsInterfaceCreate calls ConvertStringSecurityDescriptorToSecurityDescriptor, which converts a textual description of a security descriptor to some binary form.
So my guess is that access rights are hard coded inside mpssvc.dll and what I have to do is just to find the textual representation of the correspondent descriptor.
I found 8 descriptors inside mpssvc.dll:
O:SYG:SYD:(A;;RCWD;;;BA)(A;;RCWD;;;NO)
O:SYG:SYD:(A;;RCWD;;;S-1-5-80-2940520708-3855866260-481812779-327648279-1710889582)(A;;RCWD;;;S-1-5-80-3526382388-830156861-4107432654-3665941875-1028450966)
O:SYG:SYD:(A;;RCWD;;;S-1-5-80-62724632-2456781206-3863850748-1496050881-1042387526)
O:SYG:SYD:(A;;RCWD;;;S-1-5-80-979556362-403687129-3954533659-2335141334-1547273080)
O:SYG:SYD:(A;;RC;;;BA)(A;;RC;;;NO)(A;;RCWD;;;CY)
O:SYG:SYD:(A;;RCWD;;;BA)(A;;RCWD;;;NO)(A;;RC;;;CY)
O:SYG:SYD:(A;;RCWD;;;BA)(A;;RCWD;;;NO)(A;;RC;;;AU)
O:SYG:SYD:(A;;RC;;;AU)
I don't know yet which one corresponds to changing a firewall rule.
Dei nostra Matrix est.

How to setup the security based on roles in Organization.

Hi,
How to setup the security based on roles in Organization.
For example:Few users are Manager and a few user are Non Manager .Manager should have access to all work data including Non Manager and Non Manager should access based role.How to setup this? How OBI server identify the user role?
kindly let me know.
Regards.,
CHR

Hi,
You need to have Back End support to achieve this. In Back End you need to create two groups . You need to know what joins has to be made for which group (which is more important) and also make session variable for the userrole (with SQL supporting it). In the BMM layer, we need to put the security join conditions in the 'where clause'.
And make a common report. User loggin in with the respective userid will have userrole and joins assigned in the Back end. And they will be viewing the report according to their access.
Hope this will solve your problem.
Regards
MuRam

How to setup a PAC proxy on the playbook ?

Anyone know how to setup a PAC proxy on the playbook ? Thx

AGirl71985 wrote:
Hi
I have been trying to setup the mobile hotspot on my phone and haven't been able to find any instructions on how to do this. If anyone can tell me how it would be greatly appreciated. Thanks!
Amanda
Ha Amanda! First, you'll want to make sure your line has been provisioned for Mobile Hotspot service. You can add the feature to allow you to share up to 2 GB of data for 5 other devices for $20.00 per month. Once that is confirmed, please follow these steps to set up your device's mobile hotspot:
Settings> Wireless & Networks> Tethering & Portable hotspot> Portable Wi-Fi hotspot settings> check mark next to Portable Wi-Fi hotspot. This will disable all other data access so that the data usage is allocated correctly. When finished using your Xperia Play as a hotspot, remove the check mark from Portable Wi-Fi hotspot.

How to setup real SFTP in Yosemite?

There's lots and lots of information online about how to setup remote access to my mac using SSH and SFTP in Yosemite...but apparently none of it is actually useful for genuinely remote access...access from outside my network, access from miles away. Because here is what I have learned:
The ip address listed in the Sharing pane when you access remote login is internal. it's some version of 192.168.x.x, which is essentially everybody's computer and utterly useless from outside the network.
So my actual public ip as assigned by my service provider is really my IP if you are trying to get to my computer from outside.
But that IP doesn't "just work" via SSH or, much more importantly for me, SFTP. Evidently that involves something called "port forwarding" which one used to be able to do via Airport Utility, but is no longer possible because such options do not exist in the current version of the utility.
(What I want to achieve is for a friend of mine, a friend on a mac about 4 miles away, to be able to directly access very large files on my computer. I don't want to use clouds or public sites or anything like that, I just want to be my own private little FTP server just for her. That used to be no big deal.)
So... is there a solution for this?

Dropbox may be a better option if you can both have accounts with enough storage, it is a simple setup process that can be forgotten about.
Bittorrent sync is another option that mirrors data between several endpoints. You should get better performance if the files are not being transferred over the network (Dropbox & Bittorrent sync create copies at each end).
ssh & port forwarding allows you to use sftp, if you do some more setup you can also use sshfuse to mount the remote content as a network disk, it's a plugin for http://osxfuse.github.io
Just be aware that many scripts & botnets are constantly attempting to login on visible ssh ports on routers across the internet. Enabling ssh to outside access means that any user on you Mac can be a potential login - have good passwords set on ALL user accounts, and do not enable the root account password. There are also options to disable passwords in ssh (& use ssh keys only) if you want better security.
ssh is good, but it is not trivial to setup and it won't open ports for you. Apps like bittorrent sync can use UPnP to request port forwarding rules, to make setup easier.
Back to My Mac is OK, provided you are willing to hand over the keys to your Apple ID.
P.S. You keep mentioning ftp, please avoid ftp. ftp can use plain text passwords that can be sniffed over the network, avoid opening the network to inbound ftp traffic too.

How to setup the complex ownership relationship in SAP BPC

Hi Buddies,
I am new to SAP BPC. For legal consolidation, I am confused how to setup the ownership in BPC. The senario is following:
    P is the parent company, S1 and S2 are subsidiaries.
    1) P owned S1 80%, ownded S2 90%, meanwhile S1 owned P 20%
        How to setup this?
    2) P owned S1 80%, owned S2 70%, and S1 owned S2 10%.
        How to setup this?
For above 2 senarioes, how to calculate the Minority Interest? ( Using different consolidation rules?)
And if there are subgroup, how to see the subgroup result?
Thanks in advance.
Maggie Liu

Hi Will,
Thanks for reply... Actually, I've tried that before(putting comma after the flag "all," presuming the 71st step shows that I should have 3 members in the memberset under the ICDatasrc dimension. But it also did not work.
Nope, step 71 did not tell us to use piping and consequently expanding the col key range.
Thanks...
Dryan

How to setup provisioning report rule

Similar Messages

Maybe you are looking for