How to setup proxy

I tried the most hidden proxy but I can't connect in proxy test it shows my IP.
Who can tell me step by step guide to connect this proxy.
EDIT:Also I restarted my broswer.

At first I get my IP on hidemyash.com with the filter of low anonimity.
Then in some IP test sites it shows up same ip.Why I want proxy because i just downloaded avast and it copys my coputers name after setup then it takes to
another screen to "congratz" me.I presedence privacy after that avast stuff I found a bunch of malvare ad,spyware .This was not the first time i am using avast
it found a rootkit that shows there was virus in the computer before i used.(Avast was overheat my RAM while scaning thats why i removed it.
Edit:I know my zuper grammar mistakes but i am turkish and i am using ipad.

Similar Messages

How to setup proxy for Apple TV if I cannot get a micro USB cable for Configurator app? thanks.

as titled

the micro usb cable is a pretty common one all smart phones but apples use them for charging and connecting to computers most supermarket have them
that being said if it can be used to setup proxy on appetvs it's news to me only believed it could restore failed firmware on appletv's

How to setup Proxy for Java Web Start App ?

I'm having trouble getting Java Web Start to work.
at... http://java.sun.com/docs/books/tutorial/uiswing/14start/compile.html
It tell me...
To test whether your browser can launch an application using Java Web Start, click this link.
http://java.sun.com/docs/books/tutorialJWS/uiswing/14start/example-1dot4/HelloJWS.jnlp
I do that & see Java Web Start try to start but get message...
Java Web Start - Invalid Argument
Unable to launch specified application
An error occurred while launching/running the application.
Category: Invalid Argument error
Could not load file/URL specified: C:\Documents and Settings\Will\Local Settings\Temporary Internet Files\Content.IE5\OP8RSBCV\HelloJWS[1].jnlp
Then... http://java.sun.com/docs/books/tutorial/information/javawebstart.html tells me...
"This situation usually happens when your browser and your copy of Java Web Start have different proxy settings."
I click Start | Programs | Java Web Start | Java Web Start,,, then click File | Preferences | General
My choices are... Proxies: None User Browser _ Manual (User Browser grayed out)
If _ Manual checked then I get...
HTTP Proxy ______
HTTP Port _______
I'm running XP Pro via Wi Fi to a Linksys Wi Fi router to a cable modem... I'm also running Zone Alarm (tried turning it off but no luck)
I don't know how to set up the Proxy stuff... can any one please help me get this set up.
thanks - Will

OK, on my XP Pro system I went to...
Start IE -> Control Panel -> Internet Options -> Connections -> Lan Settings -> Proxy Settings
This is my 'Local Area network (LAN) Settings panel...
- user Proxy server for LAN is checked
- Address is blank
- Port is blank
So do I plug something in here... the ip address of my linksys wi-fi router and a port number or what?
My Java Web Start Preferences won't let me click 'Use Browser' only None or Manual
If I click Manual, I don't know what to plug into the HTTP Proxy and HTTP Port fields...
I tried the ip address of my router... thinking it may have a built in Proxy Server... and port 8080 as indicated by the Help page for the Java Web Start... but no luck.
I really appriceate any help on this...
thanks - Will

How to setup Proxy in new environment?

Hi All,
We have implemented a new ECC and PI environment. When we try to regenerate the Inbound proxy in ECC for a proxy message already defined in new PI Integration repository, we get the following error message:
Diagnosis
The object currently selected references objects from other namespaces. However, there are no proxy objects for these objects in the current system.
You cannot create proxy objects while editing the object currently selected for the following reasons:
Objects are possibly located in different packages to the object currently being edited
Objects are possibly subject to different naming conventions to the object currently being edited
Objects are possibly located in different software components and cannot be created or changed in this system
Procedure
Contact the development area responsible for these external namespaces and do the following:
Regenerate the objects concerned in the relevant original system
Transport the objects to this system
You can display the number of objects when you check this proxy: all entries in the check list after the entry "Objects to be changed from external namespaces".
Please advice what we need to do. This is the first time proxy is being setup in new environment...
Regards,
XIer
Edited by: XIer on Mar 27, 2008 2:16 AM

Check whether the interface you're trying to generate proxy for have any underlying basis components. If yes, make sure they're active in in the IR (and that the proxies refering to these basis software components are in the ECC box).
Regards,
Henrique.

How to set proxy setting in all application

i am using college wifi system, it used by proxy setting and username and password for that,
in the time of microsft updation I cant access internet, how to setup proxy for that??????

Hi,
Was your issue resolved?
If no, please provide the detailed information of your issue for analysis.
If the problem happened after Windows Update, let us know which update.
You could set the proxy as below:
1. Open Internet Explorer.
2. Click the Tools button, and then click
Internet Options.
3. Click the Connections tab, and then click
LAN settings.
4. Select the Use a proxy server for your LAN check box.
5. In the Address box, type the address of the proxy server.
6. In the Port box, type the port number.
7. If your network requires separate proxy addresses for different services, such as HTTP, HTTPS, or FTP, click the
Advanced button, and then type the individual proxy server addresses to use.
8. When you are finished making changes, click OK until you return to Internet Explorer.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to use proxy for all application in XFCE?

Hi all,
Is there any way I can setup a proxy and then all applications over XFCE can use it, just like the Internet Option in Windows?
I tried "export PROXY=..." in command line and setup proxy for Firefox, but those setting is not for overall system.
If unfortunately there is no way for global setting, at least please tell me how to setup proxy for svn command.
Thank you.

Sign in with whatever Apple ID desired on the device in iMessage setup.
This has no affect on the Apple ID used for store purchases or iCloud.

How to setup a PAC proxy on the playbook ?

Anyone know how to setup a PAC proxy on the playbook ? Thx

AGirl71985 wrote:
Hi
I have been trying to setup the mobile hotspot on my phone and haven't been able to find any instructions on how to do this. If anyone can tell me how it would be greatly appreciated. Thanks!
Amanda
Ha Amanda! First, you'll want to make sure your line has been provisioned for Mobile Hotspot service. You can add the feature to allow you to share up to 2 GB of data for 5 other devices for $20.00 per month. Once that is confirmed, please follow these steps to set up your device's mobile hotspot:
Settings> Wireless & Networks> Tethering & Portable hotspot> Portable Wi-Fi hotspot settings> check mark next to Portable Wi-Fi hotspot. This will disable all other data access so that the data usage is allocated correctly. When finished using your Xperia Play as a hotspot, remove the check mark from Portable Wi-Fi hotspot.

PAP2T - how to setup SIP proxy and codec on PAP2T

Hello
How to setup SIP Proxy server IP addres and codec settings on PAP2T ?

Your question here appears related to or a continuation of this previous question — is this the case?
Based on the previous posting, whatever information you're receiving from the vendor support folks appears rather garbled or confused, particularly based on that "The vendor mentioned that we need to route the DNS and get it working (forwarded) on port 80 and I'd tend to avoid them." comment over there.
I'd ask the vendor for documentation and details (as on its face, a requirement for this proxy seems, well, somewhat questionable), but yes, you're probably in the Apache config files here, and probably using overrides and .htaccess if the site is low-volume, as that'll keep the changes isolated for testing.
Out of curiousity, is this proxy project part of an attempt to get this package to accessible, but without the vendor actually having the package running on port 80? (Got a pointer to the package? We can check the docs, and see if we can translate the installation requirements into something useful on OS X Server.)
Are you running 10.5 or 10.6? Both are pretty old releases.

How to setup user's rights to modify Windows Firewall Rules?

I would like to have an account in my system that doesn't have any other administrative privileges besides rights to modify the Windows Firewall rules by means of Firewall API. How to setup a minimal set of rights for this account to do the task?
Right now what I see is that if I try to call INetFwRule::put_RemoteAddresses from an account without administrative privileges, the call fails with access denied. There is no means to find out access to what is needed. The call fails even if the process
is run under high integrity level.
I tried to setup global security audit, but there were no relevant events logged.
I tried to monitor the process with procmon, there were no any access denied events logged.
I tried to give the full access for this account to the correspondent registry keys. It didn't help.
I stepped firewallapi.dll in a debugger and found out that what fails is an RPC call to some COM interface proxy. I assumed that probably it is a remote call to some HNetCfg.FwRule method. I tried to add the user account to the HNetCfg.FwRule launch and
access permission ACLs in the DCOM configuration utility. It didn't help either.
Dear Microsoft, why did you do such a simple thing as settings user rights so difficult? Can you reveal the secret what rights and privileges I have to set?
Thanks in advance.
Dei nostra Matrix est.

Here is what I found so far.
The firewall service calls RpcServerRegisterAuthInfo to setup RPC security from FwRpcAPIsRegisterAuthInfo. It happens during registration of RPC interfaces in FwRpcAPIsInterfaceCreate. FwRpcAPIsInterfaceCreate is called from FwRpcAPIsInitialize. And FwRpcAPIsInitialize
is used from FwServiceAsyncStartupRoutine.
After calling FwRpcAPIsRegisterAuthInfo function FwRpcAPIsInterfaceCreate calls ConvertStringSecurityDescriptorToSecurityDescriptor, which converts a textual description of a security descriptor to some binary form.
So my guess is that access rights are hard coded inside mpssvc.dll and what I have to do is just to find the textual representation of the correspondent descriptor.
I found 8 descriptors inside mpssvc.dll:
O:SYG:SYD:(A;;RCWD;;;BA)(A;;RCWD;;;NO)
O:SYG:SYD:(A;;RCWD;;;S-1-5-80-2940520708-3855866260-481812779-327648279-1710889582)(A;;RCWD;;;S-1-5-80-3526382388-830156861-4107432654-3665941875-1028450966)
O:SYG:SYD:(A;;RCWD;;;S-1-5-80-62724632-2456781206-3863850748-1496050881-1042387526)
O:SYG:SYD:(A;;RCWD;;;S-1-5-80-979556362-403687129-3954533659-2335141334-1547273080)
O:SYG:SYD:(A;;RC;;;BA)(A;;RC;;;NO)(A;;RCWD;;;CY)
O:SYG:SYD:(A;;RCWD;;;BA)(A;;RCWD;;;NO)(A;;RC;;;CY)
O:SYG:SYD:(A;;RCWD;;;BA)(A;;RCWD;;;NO)(A;;RC;;;AU)
O:SYG:SYD:(A;;RC;;;AU)
I don't know yet which one corresponds to changing a firewall rule.
Dei nostra Matrix est.

How to setup three SharePoint sites on one server?

Hello,
How to setup three SharePoint sites on one server? I have three sites like:
http://site1
http://site2
http://site3
And need to have them running up on one server. I recall some changes need to be done to the host file, but not sure. Can you advise on what to change?
Thanks,
Paul
Paul

you need to make entries in DNS to get this done.
check here:http://spshare.blogspot.com/2012/05/how-to-create-host-header-web.html
nice blog with step by step explanation:
http://thuansoldier.net/?p=1323
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

How to setup multiple base station under one network?

How to setup multiple base station under one network? I have 6 rooms but one airport base station makes really difficult to get good signal from every rooms. I wonder if I can setup multiple airport base stations talking to each other under the same network to build up the signal strength will help solve this problem. But, is it possible? How?

One route would be to utilize a "roaming" network. In a roaming network, you would connect multiple AirPort Extreme Base Stations (AEBS) to the same Ethernet. Of course, this would require that your home is already wired for Ethernet.

How to Setup SSL on Oracle Application Server 10g Release 2 (10.1..2)

Hi All,
Can anybody tell me How to setup the SSL on Oracle Application Server 10g Release 2 (10.1.2).
I have all the required documents like
1. Oracle Application Server Portal Server Configuration Guide.
2. Oracle Application Server Web Cache Configuration Guide.
3. Oracle Application Server SSO Administration Guide.
I tried to follow all this documents but still i am not able to set SSL for Oracle Portal Server.

The Portal Configuration Guide, available on OTN at http://www.oracle.com/technology/documentation/appserver1012.html does provide some very specific information on how to set up OracleAS Portal.
Section 6.3.2.1 Configuring SSL for OracleAS Portal describes various configurations, such as:
SSL to OracleAS Single Sign-On
SSL to OracleAS Web Cache
SSL Throughout OracleAS Portal
External SSL with Non-SSL Within Oracle Application Server
For larger enterprise configurations, you can refer to the Enterprise Deployment Guide.
Can you give a bit more background on what you are trying to set up? Which scenario, what sort of hardware, software versions, and so on.
Regards,
Pete

How to configure proxy services in OSB for Rest based services?

how to configure proxy services in OSB for Rest based services implemented using Jersey (Rest).
The Client need to contact OSB proxy servies by posting application/xml using jersey client and OSB proxy service will call the OSB business service.
i would like to know how to get this request in OSB proxy service and send it to the business service and get the response back.

I would suggest you refer to the below links:
https://blogs.oracle.com/jeffdavies/entry/restful_services_with_oracle_s_1
https://blogs.oracle.com/jamesbayer/entry/using_rest_with_oracle_service
Hope this helps.
Thanks,
Patrick

How to setup a static IP for a wireless printer

This problem has been ongoing for several versions of OS X and the last five printers I've had and I'm finally over messing with it. For some reson, when using a wireless printer with OS X this is a repetetive problem, and I think if I configured the printer to a static IP address instead of using DHCP, it might work better. At least once a week, if not more often, I'll print something and get the ubiquitous Dock error of "Printer is not connected". The printer is still in Preferences, but if I delete it, then it doesn't show up as it should for selection.
The only way to fix this is reboot, and then the printer shows up again in Preferences. I select it and all is well again...until a few days pass and the same thing happens again. Using an HP LaserJet P1102w, still a current model, but it doesn't matter which printer I use. I also have an Epson Artisan 725 and the same thing happens with it about once a week. Also, this happens from both my Mac and my wife's Mac, so it's not an issue with just my machine.
I've searched for documentation on how to setup a static IP address for a wireless printer with the Airport Extreme, but all I find are tutorials on how to do it with an ethernet hard-wired printer. Any help would be greatly appreciated.

You could set up your router to do manual assignment of IP address instead of using DHCP, but that is a PITA, because then you'd have to manually set up IP for all your devices.
If you have AirPOrt Extreme, you could do this:
In your Apple TV, go to the Settings >> About and write down the MAC address of your ATV
Start up the AiPort Admin Utility
Go to Network tab
click + in the DHCP reservations
Choose an IP you want for your ATV & Enter the MAC address
From now on, this IP address will be reserved to the MAC address and only your ATV will be able to get it, no other device will.
It is not a static IP in a true sense, but behaves just like one.
Works great for me...
If you don't have a AP Extreme, I'm sure other routers will allow you do reservations too.

How to setup Charms in a 2 tier landscape ?

Hi All,
We have a two tier landscape i.e only having development and production system so how to setup STMS and all other settings in this type of scenario.
Can we use Virtual system in STMS as a Quality system ? If yes then please guide us and tell me how to proceed as if we dont know how to add virtual system in SMSY in solman. Please provide us with a clear picture and give us detail documentation if possible.

Hi All,
Please tell me as per the SAP standard recommendation is it necessary to have a cycle like DEV->QUAL-PROD for Charms as we are not having any Quality system or Client here in our landscape.
Please suggest a way how to proceed in this case. Please help me out.

How to setup proxy

Similar Messages

Maybe you are looking for