How to setup remote access with E4200?

Hi,
I am new to this and I need help from you all on how to setup the E4200 so that I can access the media server when I am in office? Is there a guide or step by step procedure on this? I was browsing on the Cisco website and unable to find it.

The purpose of using DDNS is it substitutes the public/WAN ip address provided by your ISP.We all know that the ip address provided by our ISP(if we are not subscribe to a premium static ip address) is basically public and will always change from time to time.So it will be difficult for us to know what's the ip address our ISP has provided us and this will lead us problems accessing our router or ftp server remotely. Thus by using DDNS' it will now allow us to access the router remotely without knowing what's the WAN ip address.

Similar Messages

How to setup the Linksys router E4200 DD-WRT for WVC54GCA

I don't know how to setup the Linksys router E4200 DD-WRT for WVC54GCA. The DD-WRT is very complcated. Please help!!!!! Also, I have used the TZO.com for the DDNS. Should I setup the DDNS for DD-WRT router??? I used the DDNS for my old model router before. Thanks.
Solved!
Go to Solution.

Hi majekho, that is best be answered by support from the developers at the DD-WRT forums.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

How to setup external access in VM?

We need to setup a Microsoft VM and allow external access without using my company VPN as we need to test the web services integration with other vendors. could you please help how to setup external access? Thanks

Hi Wilson,
As a prerequisite , that VM need to access the gateway .
It means that you need to
create an external virtual switch then connect that VM to external virtual switch then allocate a LAN IP for VM .
http://technet.microsoft.com/en-us/library/jj647786.aspx
After this you may think of this VM as a physical machine in your LAN then do what you need .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to setup the access privilege of flash file in Web Intelligence?

How to setup the access privilege of flash file in Web Intelligence? WEBI can set access privilege for single WEBI report file, but it seem cano not set access privilege for one flash file.

Thank you Maksim,
I did set the "selectionMode" to "Auto". I don't understand where In supply function I have to set lead selection of nested node to first element. Please elaborate on this. Are you talking about the context attribute bound to the second table? OR do I have to change the Importing parameters "Node" and "Parent_Element" of my supply function?
Thanks for your time.

How to setup the portal with the uniform style for SRM + Esourcing?

how to setup the portal with the uniform style for SRM + Esourcing? We will setup SRM 7 + esoourcing + portal, but as we know esourcing screen style is not same with SRM, so how to uniform the style between this 2 diffirent software? any body have idea?

Hi,
SAP E-Sourcing 6.0 is the solution. It is same look&feel.
Regards,
Masa

Apple tv 2 - root password has been changed to non default. I need to access apple tv 2. how do i get access with a forgotten password

apple tv 2 - root password has been changed to non default. I need to access apple tv 2. how do i get access with a forgotten password

Welcome to the Apple Community.
It depends on which password you are referring to, but generally speaking you can always restore the Apple TV.

Remote access with ssh

In this subject matter I am a newbie, reply accordingly.
How to access a remote computer via Internet. Not sharing files but logging into a remote machine and for executing commands on a remote machine. A detail description how to setup with ssh or other, if possible.

The arch wiki should help you out:
http://wiki.archlinux.org/index.php/Using_SSHD_and_SSH
Another question i have is: is it about automatically doing commands on a remote machine (script) or personally logging on and entering commands?
For a script you'll need some additional configuration.
General: Login on a remote machine:
ssh [email protected]
Password: mypasswd
then you should be logged in to the remote machine, with the possibility to execute commands within the permissions the user has.

How can I remotely access my computer from a different location on Apple Remote Desktop?

I downloaded Apple Remote Desktop and am trying to access our computer at our church that is in the auditorium and work on slides for ProPresenter from my office which is on a different network. The Mac Pro, which is in the auditorium, is connected to a Netgear wireless router. I would also want to be able to have access to observe and control the screen on the Mac Pro whether I am in my office or at my house. I have tried everything from going to portforward.com, followed those instructions, did port forwarding, used ipchicken.com to get my external IP and made sure that the Mac Pro had a static internal IP address and made sure the computer had access for remote management. Any help to resolve this issue would be greatly appreciated! Works fine when it is on the same wireless network, but I need access being on a different wireless network. Thanks!

Hi austinmac14,
So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
Also these steps are so one person, can connect to one computer at your work.
Open Airport Utility:
go to the dock
Click on the finder
go to the menu bar
Click on the "Go" menu
Chose "Utilities" from the "Go" Menu
double Click on "AirPort Utility"
Access the Base Station:
Double Click on your Airport Extreme BaseStation that is your internet connection router.
a new window should pop up with your Airport Base Station as the Window Name
Configure Static Address for the computer you want to connect to via ARD:
Click on the internet Icon from the toolbar
Click on the "DHCP" tab
For "DHCP Reservations:" Click on the "+" button
For the "Description" put "ARD"
For "Reserve Address by:" set "DHCP Client ID"
Click the "Continue" button
For "DHCP Client ID:" set "ARD"
write down the number in "IPv4" address field
Click the "Done" Button
Configure routing to ARD computer:
Click on the "Advanced" icon from the tool bar.
Click on the "Port Mapping" tab
Click on the "+" button
for "Service:" Chose "Apple Remote Desktop"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Apple Events"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Login - SSH"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "Update" button.
wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
Configure the ARD computer to use the correct IP address:
Go to the computer you want to be able to remotely connect to
On that computer, Go to the menu bar
Chose the "Apple" menu bar
Chose "System Preferences…"
Click on the "Show All" button
Click on the "Network" icon
For the active network connection, (the connection on the left side with the green dot), click on it
Clock on the "Advanced…" button
Click on the "TCP/IP" tab
for the "DHCP Cient ID: field put "ARD".
Click the "OK" button
Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
Find out what your public internet IP address is.
On the computer you wish to connect to over the internet, gotohttp://whatismyipaddress.com/
when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
At this point you should be able to connect to the computer remotely
connect to the internet from another location.
open Apple Remote Desktop
go to the file menu
chose connect to computer using ip address
set the address to the address to the IP address you wrote down for step 6. 2.
use the same password as you used to connect to the computer at work using ARD.
So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
Also some network connections change. When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
Of corse there are ways around this. But that's kind of another conversation.
Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

How to setup Mobile Access Server

Hi,
I am trying to setup Mobile Access Server on my Mac Mini Server. The setup I have is a small network behind a Airport Extreme. I would like to give all users access to services using Mobile Access Server and was hoping initial setup was going to take care of that....no such luck.
What do I fill in for the local servers? How do I access this service from the outside the lan? How do I need to configure my Airport (with the other services, it happened almost automatically from the security pane).
Thanks,
Ian

Hi,
In the field for local server you just type in the local dns name for your calendar server, mail server etc... Also select which port you want publish externally and the the correct port your service is actually using on your lan (Selected under advanced tab). Make sure your mobile access server can resolv your hostnames correctly. It should point to an local ip. If an nslookup shows your public ip, you have to correct your local dns server (This is often called split dns configuration.)
To access this from outside your LAN you have setup NAT and permit the port you have configure your mobile access server to be the incomming port. How exactly you do that on the airport I am not sure, but I am sure it is explained in the user manual for the airport.
I found this video about the mobile access server on youtube: http://www.youtube.com/watch?v=_VRgl2bncZU
Hope this helps.
Bernt

Time capsule remote access with verizon Fios router

I got a new 5gen time capsule. I'm trying to remotely access some files I transferred into the TC. The TC is on bridge mode with my Verizon Fios router. Is there a way to access my files remotely if so how do I set up.

The Fios router should offer ddns service from several of the providers.
Typical ones are dyndns and noip
but there are a fair number of them.. just the client has to be included in the firmware of the router.
Static public IP is the best option by far, but most ISP will only offer it with their business plans which are so much more expensive that it is not worth it. Some cable services will not offer it at all as their plans are all domestic.
Anyway the info is a phone call away and see how much extra it costs if it is offered.
Otherwise check the router for what ddns services are supported and join one.. they are free to a few dollars a month for low use service.

How do I remotely access a friend's Windows XP desktop using my ibook?

I hope I am posting this question in the right forum/thread:
I am not quite a newbie on the Mac, however when it comes to issues such as remote access, virtual private networks, etc., I am pretty much lost. I've even poured over the posts here to see if they answer any of my questions, but confusion is setting in, so I thought I'd just put my question out there to see if anyone can give me a simple answer:
I have a friend who keeps having trouble with anything and everything to do with her Windows XP computer, from passwords to router/modem configurations. When she calls, I need to stop everything I'm doing and drive to her house to try to resolve her issue. It would save me (and her) a lot of energy and heartache if I could merely remotely access her computer (she has windows xp home edition) to help her out.
What is the best way to remotely access her PC from my MAC?
Thanks in advance for your help!
ibook G4 Mac OS X (10.4.10)

Microsoft provides a Remote Desktop Client for Mac OS X. Check it out here - http://www.microsoft.com/mac/downloads.aspx?pid=download&location=/mac/download/ misc/rdcupdate103.xml&secid=80&ssid=10&flgnosysreq=True
For actual connection, I have not tried this, but if you get her public IP, you should be able to connect to her PC.
Macbook Mac OS X (10.4.10)

How to Setup another Access Policy 5.3

hi everyone,
Thank you for your help in advance. I am new to v5.3, and I am not good at VPN. So hope you can help.
I just have my consultant to configure this correctly just today. Currently, there is only one rule for the access policy (Single Result Selection). That rule is to use Active Directory as the source for the authentication. And by default will deny any other access which is not found in the rule.
Now... I just got an order that I need to setup a new user who will need to access to our network by using Cisco IPSec VPN (the software one). But that user is not setup in our Active Directory, and we do not want him to access our domain anyway. He only needs to access non-domain resourse...such as airconditioning controller by IP. So I am thinking to setup his account by using "internal identtity". If I do this way, what do I need to do to setup another access policy? May you give me some steps with little more details?
OR... if it is not the way I should do...what else can I do to achieve this goal? Also, he said he could provide his static IP trying to access from.
I have a ASA 5520.
Thank you very much for your help.
Takami Chiro

Hello,
Instead of creating a separate rule for the credentials validation you can edit the existing one that points to AD1 (only) and change it to a result on the ACS that checks both AD1 and Internal Users. In that case we need to use Identity Store Sequence. Refer to the steps below:
On the ACS GUI > Users and Identity Stores > Identity Store Sequences > Create > Select "Password Based" and on the first box move AD1 and Internal Users to the right. Please do the same on the box at the bottom.
The option "Internal User/Host Advanced Option: If internal user/host not found or disabled then exit sequence and treat as "User Not Found" should stay unchecked. Click submit.
After creating the ID Store Sequence you need to change the Identity Result where you had AD1. Now the name of the ID Store will display as an available option. Please select that one and save the changes.
With the above configuration, the expected behavior would be:
1) ACS receives a request from the Internal User.
2) ACS tries to validate the credentials against AD.
3) AD returns an "User Unkown" response.
4) ACS moves to the Internal Users.
5 ACS successfully authenticates the user validating the provided credentials against Internal Users.
Hope this helps.
Regards.

How to setup a group with autentication

Hi, Every body,
I am new in this forum, I found Stratus is a so exciting platform, now I need your help.
I want to setup a group with posting autentication, in the group, some one has the posting right, others have not. I found the "groupspecWithAuthentication, groupspecWithoutAuthentication, encodePostingAuthorization，setPostingPassword" etc. but I cant understand how to use them.
I have dived in this forum and the reference of Stratus 2.0 beta( here) for several days, and I have tried the samples posted by Mike, and I have study almost all threads in this forum, but I still cant find the clue.
Please help me out, thanks advanced,

Thank you, Mike, for your timely reply. Forgive me the delay, because now is our most important festival, I just back from a party.
Now I understand, but I still wonder,
1. if a group is in running, and a authorized user has joined. Now he misdoes, I want to withdraw the authentication, how can I? revise the password and recreate the group?
2. How can I setup a group, just authorized users can join? I know I can use secret group name, but if authorized user divulge the group name, others without autentication can join the group too. ( because the swf easy to reverse, hacker can sniff the opaque groupspec string, revise the swf, impersonate authorized user, etc).
3. How can I banishment a misdoer from my group?
Thanks again for your time.

How to configure Remote Access to APE HDD

I know this may seem like a newbie question to ask, but I'm trying to figure out how to remotely access the Hard drive that is on my APE network. I just need to know what I need to configure on the airport so that I can get it all to work. I'm fairly sure that I've got a static IP from my isp, but am working on verifying that just to be sure. Any help is welcome, thanks!

Scooter1015 wrote:
So what this guy is saying makes sense, except when I try to do the Port forwarding the airport tells me that I can't use port 548 unless I disable file sharing which is what I use anyway.
I took another look at the instructions on that Web page. Evidently that person had another router that was creating his LAN and had a Time Capsule connected to that router. If your AirPort Extreme is your "main" router, you shouldn't need to forward any ports, as the AEBS is the end destination of your disk access communications.
Be sure that in the File Sharing tab of AirPort Utility's Disks panel you've checked "Share disks over WAN".

How to setup the access duration for user

Dear experts,
As requrement of users, we need to setup the access duration for all users of our company . It's mean users only access into SAP on defined duration
Ex : Working time is 8h00 am to 17h00 pm, after 17h00 pm, users cannot access into system
Please help.
Thanks,
Neo

Hi all,
Thanks for your solution
We want to set the access duration for end-user but sometimes, we need to flexible to allow user access to system in some special case.
Let me detail users's requirements
- Users can access to SAP fom 8h00 to 16h00
- At 16h00, system will send the warning message to user to inform that system will aunomatic turn offf after 15 minutes, it's mean system will automatic kick out users after 15 minutes
- From 16h00 to 8h00, users can not access to SAP
- However, in some special case, we can grant the acess to system to specific user.
Can we setup these steps on SAP ?
Thanks,
Neo

How to setup remote access with E4200?

Similar Messages

Maybe you are looking for