How to setup RFC Connection for SAPOSS?

Dear Experts,
I tried to setup the RFC connection for SAPOSS based on the following settings, but when I test connection, it failed.
Target system : OSS
Msg. Server : ... ( this where I stuck which I'm not sure what to fill in)
Group : EWA
Client : 001
User : OSS_RFC
Password : CPIC
Does anyone know the right settings?
Regards,
Abraham

Hi all,
Do I really need to setup our own SAProuter if our firewall doesn't block any outbound IP address?
I've tried the following settings in OSS1 but still failed to connect.
SAProuter at SAP :-
Name : sapserv3 ( or sapserv7 or sapserv2)
IP address : 147.204.2.5 (or 194.39.134.35 or 194.39.131.34)
Instance no : 99
SAPNet Message Server
Name : oss001
DB Name : 001
Instance No : 01
I left the SAProuter1 and SAProuter2 (at customer site) blank.
Did I miss out anything?

Similar Messages

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
Below are the Windows 8.1 client IP Configuration
C:\Windows\system32>ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
   Connection-specific DNS Suffix . : home
   Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
   IPv4 Address. . . . . . . . . . . : 192.168.1.5
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.home:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
   Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
   Default Gateway . . . . . . . . . :
Tunnel adapter iphttpsinterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
   Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
   Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
   Default Gateway . . . . . . . . . :
Below are the IPConfiguration details for Direct Access server
C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
   Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
   IPv4 Address. . . . . . . . . . . : 10.192.1.25
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
   Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
   Default Gateway . . . . . . . . . :
Tunnel adapter 6TO4 Adapter:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter IPHTTPSInterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
   Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
   Default Gateway . . . . . . . . . :
ipconfig exited on MURA01 with error code 0.
Below are the IPCONFIG Details for SCCM Server:
C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
   IPv4 Address. . . . . . . . . . . : 10.192.1.30
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
ipconfig exited on sccm01 with error code 0.
What will be the IPV6 values to configure boundary?

Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

WHY do we set up a RFC connection for workflows

Guys please tell me why do we setup a RFC connection for workflows.
I am getting few dumps for function module IDOC_ERROR_WORKFLOW_START_R in transsactional RFC connection.
Looks like it is because of temporary disconnection.
i want to know what is the relationship of RFC with wirkflows.
Thanks in advance

Quoting text in automatic WF customizing transaction (SWU3):
Function
The workflow runtime system always executes its tRFC (transactional RFC) calls on the logical destination WORKFLOW_LOCAL_xxx (xxx stands for the three-digit number of the client).
The workflow runtime system only operates within one client. The naming for the logical destination guarantees that these names are unique across the system.
If you carry out this activity automatically, the logical RFC destination WORKFLOW_LOCAL_xxx is created (if it does not already exist). The user WF-BATCH (system user) is assigned to this destination.
If you belong to the SUPER user group, and the WF-BATCH user does not exist, it is created and automatically gets the maximum authorization of the current user (SY-UNAME). This function is to be performed once by a user who belongs to the SUPER user group.
If you perform this activity manually, you can maintain another system user and another password.
In SWU3 you can configure RFC destination.

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

How to setup the RV120W for quickvpn

Hello,
The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
Thanks for any help

User Guides for thee rv120W are here:
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
and theres some more stuff over on my site:
http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

How to have Secure Connection for File Adapter.Pls help

Hi All,
For File to File Scenario
How to have Secure Connection for File Adapter.
Pls send links/blogs explaining this scenario.
Regards

hi rich
go through these links
FTPs connection failed - error ".. certificate rejected by ChainVerifier"
Re: What is SFTP, FTI channels
http://help.sap.com/saphelp_erp2005/helpdata/en/e3/94007075cae04f930cc4c034e411e1/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/frameset.htm
FTPS implementation question.
http://help.sap.com/saphelp_nw04s/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
Server certificate rejected by ChainVerifier:FTPS server(Points Guaranteed)
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
File adapter
thanks
Kunaal

How to setup SSL cert for SharePoint apps in a three tier farm with nlb

I am having trouble understanding how to setup the SSL certificate on SharePoint apps or in general its configuration

Please check the below thread..
https://social.technet.microsoft.com/Forums/sharepoint/en-US/53465d30-10b2-48c9-9541-5ade738156b4/how-to-setup-ssl-cert-for-apps
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh

No trusted/login RFC connection for system BCP in TA SMSY

Hi,
i got this error Early Watch Report for only production System.
No trusted/login RFC connection for system BCP in TA SMSY
Amit

HI,
I hope the error message is straight forward.
Please Check whether you have established RFC connections to the BPC system and the same is avaiable under the RFC connections in TRXn SMSY-Your system -.Test the connections in SM59-BPCs-> READ and Trusted RFCs.
If its not present, Generate the RFCs again manually.
Hope this helps.
Revert for any issues.
Thanks,
Jagan
Edited by: jagadheeshan govindasamy on Oct 9, 2009 3:24 PM

SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?

Hello IDM-experts,
where can my customer find information about
SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
Customer situation description:
The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
SSO access to the Abap systems via the SAPGui. See screenshot as an example.
Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
this or if it is possible via SAP IDM 7.2.
You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
Kind regards,
Daniela

Do you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
Thanks
Tim

How to setup the connection between non-unicode client and unicode server?

hi.
we played the program in 4.6x that call a data from unicode server (ECC6.0) to non-unicode server. ( not played in the unicode server.)
When a program ended that English Character was normal, but Korean Chinease... was unknown text.
I think conversion from unicode to non-unicode is a main reason.
General Notes are issued for the unicode side rfc connection configuration.
but, i want to know how to setup into the non-unicode system to interface with unicode system.
I hope your great answer.

Hi,
For taht you have to deploy korean and chinese langauges seprately on non unicode system.Then try to connect to the unicode system.It will work for you.
Regadrs
Vijay kumar

How to setup my airport for music streaming

Hi all
I would like to use my iPhone and or iPad to stream music from Pandora and Spotify to my 5.1 (Wired) Speakers.
This question is similiar to this thread https://discussions.apple.com/thread/4153687 however i wanted some clarity and thought best to start a new discussion before pulling my hair out doing this the wrong way.
I have an unused Airport Express basestation (A1408) My current home setup is as follows:
Modem Router: (Netgear DGND3700) N600 Wireless ADSL2+ Dual band Gigabit
Home Theatre Computer: Windows 7 (Cat6 LAN Ethernet connection) NO LAN port
AV Reciever: (Onkyo TX-SR309)
5.1 Speakers: Wired connection to AV Receiver (NOT Airplay capable)
Laptop: Windows 7 (Cat6 LAN Ethernet connection)
My question is how to setup the airport, i understand it can be used to enable airplay streaming of music over the existing WiFi network, as these music streaming apps download and play music concurrently i would not want to have to switch between to two seperate WiFi networks. Should i plug the airport into the HTPC? I would need to purchase a LAN Splitter as the only LAN socket is already taken up with my cat6 connection. OR would i plug it directly into the modem/router? This second option is prefereable.
I have attached an image of my setup below. Any advice would be great, Regards Steve
[URL=http://s1293.photobucket.com/user/steve7677/media/homesetup_zps63eaf61c.jpg.html][IMG]http://i1293.photobucket.com/albums/b599/steve7677/homesetup_zps63eaf61c.jpg[/IMG][/URL]

Still slightly confused, with the link you provided i chose scenario 2. All the other secanrios instructed i connect the airport express to my home stereo or powered speakers. As i dont have an aiport express only an airport extreme there is no audio jack and cannot connect it to the stereo/speakers.
option 2: Connecting to an existing Wi-Fi network as part of a roaming network
Ensure that the AirPort base station Ethernet cables are connected as above
I have done this and conected it via ethernet cat6 to the modem/router
Launch AirPort Utility 6.1. The Assistant will automatically configure the Roaming network
Im using windows 7 and cannot find this version of aiport utility, only 5.6.1 - The message comes up: Aiport utility was unable to find any airport wireless device. I am running this utility on my win7 HTPC (which is connected to my modem/router via cat6 LAN) The airport light is blinkng amber.
would you reccommend a hard reset of the airport? or can you provide a link for AirPort Utility 6.1.?
Regards

How to Alert RFC connection failure via message mapping? Kindly Help!

Hi Experts,
    I have a JMS - XI - RFC scenario.
JMS receives the Rosattenet PIP contents and sends it to RFC function module in remote SAP R/3 system.
   I have a requirement where I have to monitor RFC connection failure because of the remote R/3 system being down. I have to send a email alert where the subject contains the PIP number to understand for which PIP the connection failed.
The PIP number exists in the PIP content at the interface.
If I use the Alert configuration in the runtime workbench for monitoring then I cannot dynamically pass the PIP number.
Only way I think of triggering alert is in the message mapping via a Java UDF.
But I am not sure how can I do this? How do I check in the UDF if RFC connection has failed? Is this the correct approach?
How to acheive my requirement? Note that my email subject content is dynamic bacause if PIP number.
Please help!
Thanks
Gopal
Message was edited by:
        gopalkrishna baliga

Hi Gopal,
what version/sps of XI are u running?
The easiest way to do what u want inside a UDF is to
1. use JCo to try estabilish a connection to the remote SAP System
2. if that fails, use JavaMail to send an email message
Let your UDF work on the PIP number, accepting it as input, and (maybe) returning it as output if everything goes ok. Otherwise break the mapping execution as described by Michal in one of his last weblog (using Dynamic Configuration).
Note that the above method doesn't guarantee that the message will be actually delivered, as some seconds could last between your check and the real RFC delivery operated by the Adapter Engine...
I am evaluating a way to do the same with Alert Framework. I will let you know the result!
Cheers,
Alex

Configuring RFC connections for load balancing.

Hi ,
We have the following landscape for our systems.
The database is installed on z/os , db2 (mainframe). The central services( SCS and ASCS) are also on the mainframe. So the message server is on mainframe.
The CI is on AIX and The DI is on AIX.
We have Logon groups configured and load balancing Configured and is RFC enabled.
1) When we connect to SAP using the SAPGUI and the portal connection is made to either CI or DI depending upon the best response times. Now recently we are running the mercury load testing, all the users are connecting to DI. Why are the users connecting to DI even though we have load balancing?
2) I have a system with SID BP0, with one CI and one DI. The logon group is BP0 and the message server name is cyrix. Now I have other another system EP0. I have created a RFC connection from EP0 to BP0. In SM59 I have selected the load balancing option, and provide the message server name, SID and logon group name. The connection does not work. If I connect directly to the CI or DI the connection works. Please tell me how can I configure load balancing for RFC connections.
Thanks
Manmath.

Dear 917996,
There are two types of load balancing:
- Client-side load balancing (setting up the tnsnames.ora on client side). More information here (http://ggsig.blogspot.co.uk/2012/04/client-side-
load-balancing-in-oracle.html). Very good video produced my friend Igor Melnikov is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/client/clientloadbalance_viewlet_swf.html)
-Server-side load balancing (remote_listener and setting service parameter clb_goal). Very good Igor Melnikov's video is here (http://www.dsvolk.ru/oracle/racdd4d/demos/video/loadbalance/server/serverloadbalance_viewlet_swf.html).
I have read about client side and server side load balancing. By editing tnsnames.ora I have enabled client side load balancing which is suppose to select listeners at random. then why does it only go to second node?Could you please show your tnsnames.ora on client?
Please can anyone help me to configure server side load balancing with SCAN. I have read many many post but couldn't find a clear answer.Based on your output (remote_listener string cmbtrnrac-scan:1521) you have already configured the server side load balancing.
SQL> show parameter listener
NAME TYPE VALUE
listener_networks string
local_listener string (DESCRIPTION=(ADDRESS_LIST=(AD
DRESS=(PROTOCOL=TCP)(HOST=10.1
7.67.214)(PORT=1521))))
remote_listener string cmbtrnrac-scan:1521How many SCANs do you use? Do you use DNS?
regards,
Gennady

How to close RFC connections

The RFC connections to the R/3 backend system are not closed when I close my iviews which are created in the Visual Composer. Each time the iview is reloaded, an additional RFC connection is opened...
Has someone a solution for this problem?
Kind regards
Frank

Hi Frank,
The connector pool keep the connection alive to be reused by the model iViews datasource, those connections will be closed at the timeout or when CLEANUP runs.
It's not a problem is the way how the connector framework works
You can adapt the timeout according SAP Notes 913483 & 314530
Best Regards, Luis

How to change the connection for a recurring report

I have a group of reports running in production on recurring schedules. I need to update the database connection for these as we are changing our server environment.
I open the report in Crystal Reports 11 and changed the database connection saved the report back to the Enterprise Server location (I also have a backup of the original). When I preview the report using the Central Management Console, the report uses the updated database connection info. When I test the recurring report I get a logon failure. When I go to the instance to look at the database logon for the recurring instance it shows the old database connection.
How can this database connection get updated for the current group of instances for these recurring reports?
Thanks
BOBJCMC

Hi Stratos,
I tried to use .NET SDK to update the Logon_Info properties as below. But it does not seem to be working. Is this the correct way to update logon info for recurring instances?
infoObject.ProcessingInfo.Properties["SI_LOGON_INFO"].Properties["SI_LOGON1"].Properties["SI_USER"].Value = <userid>
infoObject.ProcessingInfo.Properties["SI_LOGON_INFO"].Properties["SI_LOGON1"].Properties["SI_PASSWORD"].Value = "pwd"
Thanks
Ajith

How to setup RFC Connection for SAPOSS?

Similar Messages

Maybe you are looking for