How to setup sent items for IMAP in Apple Mail

I am changing my aple mail email account to an IMAP account from a POP3.
When I do this I lose my sent items. I was able to import my sent items back in, but when I try send a mail it does not register in my sent items. It shows that I did not send anything even though I did. Is there something else I need to change in my IMAP settings to get this to work correctly?
Message was edited by: gazo

Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these *folder & file* to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

Similar Messages

  • How to enable sent item for resource maillbox.

    Hello Team,
    I have access to shared mailbox. I need emails sent from shared mailbox be sent to "Sent item" folder.
    Does anyone knows the option to enable this feature.
    Thanks
    Srinivas

    Hi,
    To force Outlook to store messages in the Sent Items folder of that same shared mailbox when the messages are sent from a shared mailbox, please follow the steps below:
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully.
    For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft
    Knowledge Base:
    322756 How to back up and restore the registry in Windows
    A. Install the Outlook 2010 hotfix package that's dated December 14, 2010. For more information about this hotfix package, see the following Microsoft Knowledge Base article: 2459115
    Description of the Outlook 2010 hotfix package (outlook-x-none.msp): December 14, 2010
    B. Enable the hotfix by adding the DelegateSentItemsStyle registry entry, and then set the entry's value to 1. To do this, follow these steps: 
    1. Click
    Start, click Run, type regedit, and then click
    OK.
    2. Locate and then click the following registry subkey:
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Preferences
    3. On the
    Edit menu, point to New, and then click DWORD Value.
    4. Type
    DelegateSentItemsStyle, and then press Enter.
    5. Right-click
    DelegateSentItemsStyle, and then click Modify.
    6. In the
    Value data box, type 1, and then click
    OK.
    7. Exit Registry Editor.
    We can learn more information from this kb below:
    http://support.microsoft.com/kb/2843677
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How to setup FS Items for debit and credit only Financial Statement Items

    Hi,
    In Financial Statement, there are line items that report for the same accounts that are debit only under Assets and credit only under Liabilities. How should I setup Consolidation Chart of Accounts/FS Items in EC-CS for such items?
    Regards,
    B Lim

    Hi Prem,
    We have already assigned all the co-codes to only 1 COA.
    However, we did not create any Group COA and has no intention to.
    My issue is this:
    As you are aware in the Financial Statement, we are able to maintain for GL accounts to be reported under Assets by specifying the DR indicator and for the same accounts to be reported under Liabilities by specifying the CR Indicator.
    When I maintain the Consoliated COA in the Consolidation module (tcode CX16), I have problem with these accounts. How do I create the FS Items such that DRs goes to Assets lines and CRs goes to Liabilities?
    Regards,
    Bernard

  • How to setup the RV120W for quickvpn

    Hello,
    The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
    Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
    Thanks for any help

    User Guides for thee rv120W are here:
    http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
    http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
    and theres some more stuff over on my site:
    http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

  • How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

    How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
    I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
    I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
    Below are the Windows 8.1 client IP Configuration
    C:\Windows\system32>ipconfig
    Windows IP Configuration
    Wireless LAN adapter Local Area Connection* 3:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Wireless LAN adapter Wi-Fi:
       Connection-specific DNS Suffix  . : home
       Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
       IPv4 Address. . . . . . . . . . . : 192.168.1.5
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 192.168.1.1
    Tunnel adapter isatap.home:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . : home
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
       Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
       Default Gateway . . . . . . . . . :
    Tunnel adapter iphttpsinterface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
       Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
       Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
       Default Gateway . . . . . . . . . :
    Below are the IPConfiguration details for Direct Access server
    C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
    PsExec v1.98 - Execute processes remotely
    Copyright (C) 2001-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    Windows IP Configuration
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
       Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
       IPv4 Address. . . . . . . . . . . : 10.192.1.25
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.192.1.1
    Tunnel adapter Teredo Tunneling Pseudo-Interface:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
       Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
       Default Gateway . . . . . . . . . :
    Tunnel adapter 6TO4 Adapter:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    Tunnel adapter IPHTTPSInterface:
       Connection-specific DNS Suffix  . :
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
       IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
       Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
       Default Gateway . . . . . . . . . :
    ipconfig exited on MURA01 with error code 0.
    Below are the IPCONFIG Details for SCCM Server:
    C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
    PsExec v1.98 - Execute processes remotely
    Copyright (C) 2001-2010 Mark Russinovich
    Sysinternals - www.sysinternals.com
    Windows IP Configuration
    Ethernet adapter Ethernet:
       Connection-specific DNS Suffix  . :
       Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
       IPv4 Address. . . . . . . . . . . : 10.192.1.30
       Subnet Mask . . . . . . . . . . . : 255.255.255.0
       Default Gateway . . . . . . . . . : 10.192.1.1
    Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
       Media State . . . . . . . . . . . : Media disconnected
       Connection-specific DNS Suffix  . :
    ipconfig exited on sccm01 with error code 0.
    What will be the IPV6 values to configure boundary?

    Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • How to create database item for fast formula?

    Hi,
    Is there any document for how to create database item for fast formula? I could not find in Metalink or this forum. Thanks.
    Andy

    Oracle ship many pre-delivered Database Items plus they're created automatically when you create Input Values (etc).
    There's often something already there for you. If there's not, you usually create Fast Formula functions to retrieve other data. You don't create your own custom DBIs; Oracle don't deliver APIs for that.

  • How to setup SSL cert for SharePoint apps in a three tier farm with nlb

    I am having trouble understanding how to setup the SSL certificate on SharePoint apps or in general its configuration

    Please check the below thread..
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/53465d30-10b2-48c9-9541-5ade738156b4/how-to-setup-ssl-cert-for-apps
    Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
    Mahesh

  • How to setup Data guard for SAP database?

    Can someone please tell me how to setup data guard for SAP databases?
    Thanks,
    Abhi

    Hi Abhi,
    have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
    14
    Oracle Data Guard
    You can use "Physical Standby".
    You cannot use "Logical Standby".
    You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
    You can use Data Guard Broker.
    You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
    In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
    Maximum Protection causes the primary database to terminate if problems occur in the standby database.
    And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
    Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
    regards
    Kay

  • SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?

    Hello IDM-experts,
    where can my customer find information about
    SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
    Customer situation description:
    The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
    SSO access to the Abap systems via the SAPGui. See screenshot as an example.
    Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
    this or if it is possible via SAP IDM 7.2.
    You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
    Kind regards,
    Daniela

    Do you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
    If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
    Thanks
    Tim

  • How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

    How can I purchase items for app when the app was loaded on another ID before? I has to Chang my AppleID and also transferred an app to new phone. I can't purchase items for app because it wants me to buy the app through new ID. The app was free.

    All apps (and other content from the store) are tied to the account that downloaded them, whether or not they are free. To do in-app purchases in that app you will either need to log in with the account that downloaded it, or delete it (which will delete its content) and download it with your currently logged in account if you want to do IAPs on that account.

  • How do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?

    how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?

    Cessna007 wrote:
    how do i sign up for a new e-mail address @icloud or @me; and can I have more than one e-mail address?
    You create an @icloud.com address in the first place by signing into Settings>iCloud with your Apple ID and choosing an addres - you can only create an @icloud.com address, not @me.com.
    Then if you want further addresses on the same account you can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account or move it to another account.
    More information on aliases here: http://help.apple.com/icloud/#mm6b1a490a

  • How to create a folder for a specific e-mail account?

    How to create a folder for a specific e-mail account?
    I'm using a POP e-mail account and I would like to create folders / sub-folders... how can I do this?

    You can right click on your Desktop and select New Folder.  In Finder File > New Folder should work too, not in front of my Mac.
    Welcome to back by the way.  You might find these websites helpful.
    Switch 101
    Mac 101

  • Have a question I do not use mail in my computer I use yahoo and I have all these emails and selected all and then delete then delete trash and they always come back how do I stop these old email in apple mail? I never send anything from there but I have

    have a question I do not use mail in my computer I use yahoo and I have all these emails and selected all and then delete then delete trash and they always come back how do I stop these old email in apple mail? I never send anything from there but I have the same email in yahoo but delete them and they still show up in apple mail from day one how do I get rid of these once and for all.Please help
    <Edited by Host>

    I am soooooooooooo confused now.  Ok, if you are having problems with Yahoo Mail and Gmail but you do not use Apple's Mail you need to do the following:
    1 - Post in Yahoo's Mail forums and/or contact their tech support.
    2 - Post in Gmails forums and/or contact their tech support.
    Neither of the above are Apple's products.

  • How could i import .olm outlook files to apple mail on osx mountain lion

    Recent days i have decided to use apple mail. So i export my Outlook data .olm files . but could you please help me how i could import this .olm files into apple mail.
    i am using osx mountain lion

    I goggled your question and came up with this:
    https://www.google.com/search?q=import+.olm+into+apple+mail&ie=UTF-8&oe=UTF-8&hl =en&client=safari
    You can do the same.

  • What is the easiest method to convert your Outlook Mail from MS Office 2011 for mac, into Apple Mail?

    What is the easiest method to convert your Outlook Mail from MS Office 2011 for Mac, into Apple Mail?

    As best I can see from googling it, there is NO easy direct way with Apple's builtin tools.  If you Google it you will find that many software companies are selling Apps specifically designed for this purpose.  Good luck.
    Hope this helps

Maybe you are looking for

  • How do I install a SSD drive - the Bios does not allow changing to AHCI mode

    I have a Windows 7, HP ENVY approx 1.5 years old.  I want to install an SSD drive, however the BIOS seems to be locked, or does not include options to change the SATA connection to AHCI or RAID. How does one unlock the BIOS, or change the sata settin

  • FTP service through CSM: Quit command not working

    Greetings all I've been testing FTP service through our CSM for about a day now and has run into an issue I can't find an answer for. Here are the settings I'm currently using for the vserver and serverfarm. The 10.90.1.0 network is routed from my cl

  • New Idea for NSU...

    Wouldnt it be great if Nokia Released a NSU with Username & Login section so people nokia users can register for BETA firmware this way this will help Nokia make Stable Firmware (Final Release)... The Registration should also mention which products t

  • Field not set: ParentEPSObjectId when creating Project.

    Hi everyone, I'm developing .net application and getting data from primavera by using p6 web service. At the moment I stuck on project creation. I'm using following code to create a new project: Public Function CreateOneProject(pProjectName As String

  • VSO account and VS 2013 code base not in synch

    I have a VS online account connected to a Azure Webapp.   How do I synch-up the code with Visual Studio 2013.  I have connected VSO and VS 2013 as directed.  However, the code base in VSO is not the same when I connect to VS 2013.  There are missing