How to setup SSL cert for SharePoint apps in a three tier farm with nlb

I am having trouble understanding how to setup the SSL certificate on SharePoint apps or in general its configuration

Please check the below thread..
https://social.technet.microsoft.com/Forums/sharepoint/en-US/53465d30-10b2-48c9-9541-5ade738156b4/how-to-setup-ssl-cert-for-apps
Don't forget to mark it as an Answer if it resolves your issue and Vote Me as helpful if it useful.
Mahesh

Similar Messages

Sharepoint 2013 Foundation three tier farm with two Webservers in NLB

Heloo,
I have been strugling with a problem the last htree days.
I have instelled and configured a sharepoint 2013 three tier farm with Sharepoint 2013 Foundation and MS SQL 2014 Express. This is a Test Farm and all the servers are Windows 2012 R2.
I have one SQL Server, one Application Server and two Webservers. The tow web servers are configured with Multicasting NLB. The NLB name is "sharepoint.ws.domain.net". The IP of the NLB is also in our DNS Zone.I have made a Web Application with
the name "sharepoint.ws.domain.net" on port 80 (NLB name) and a Site collection with the same name.
Now whene I am working on the Sharepoint Site I get very offen a login Window or I get the message "An error occurred while processing the request on the server. The status code returned from the server was: 0".
The error "An error occurred while processing the request on the server. The status code returned from the server was: 0" comes when I try to create a sub Site (most with no Permissions inheritance)... but not allways. I also get sometimes
the same message when I upload files (MS Office documents and PDF files).
The login Windows comes whene I am navigating throw the Sites... but also not allways.I go to the Site with an IE11 and the Site is also in the Intranet security sites.
Can you help me on this one...
Kind Regards
Ioannis Kyriakidis

With no hostname on the Web Application, you have to create Host-named Site Collections. So that complicates things a bit.
As far as NLB setup, you create Web Applications the same way you would otherwise. NLB is simply installed on both Web Servers and placed into the NLB VIP (virtual IP). The DNS A record points at the VIP.
Also set up your Windows NLB using Unicast instead of Multicast. If you have certain types of switches that block unicast ARP from multiple clients, e.g. Cisco, you may have to make an exception for them (e.g. http://www.cisco.com/c/en/us/support/docs/switches/catalyst-6500-series-switches/107995-microsoft-nlb.html).
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to setup JNDI Name for Oracle Apps adapter?

Hello,
I am learning Oracle SOA 11g and trying to do some tutorial on Oracle Application Adapter. I know how to configure JNDI for DBadapter and I did that successfully. I followed same steps to create New JNDI for Oracle Apps Adapter.
1. I Created new data source using Path Services->Data Sources -> New Genric Data Source. Connection to database was successful and created new JNDI Name: jdbc/PKDTAPPS.
2. Then Deployment-> OracleApps Adapter-> Configuration-> Outbound Connection Pools -> New and created JNDI Name eis/Apps/PKDTAPPS.
However I did not find newly created JNDI Name in step 2 under Deployment-> OracleApps Adapter-> Configuration-> Outbound Connection Pools -> javax.resource.cci.ConnectionFactory.
Please let me know if am I following correct steps to create new Oracle Apps Adapter JNDI Name or not.
Since above approch did not work I created new JNDI for DBAdapter with same database connection details. And then latter on use that JNDI Name while creating Oracle Application Adapter in JDeveloper composite. And it allowed me to access Oracel Apps open interface. However while deploying the application it gave me following error.
<Feb 16, 2015 10:50:59 AM CST> <Error> <oracle.integration.platform.blocks.deploy.servlet> <SOA-21537> <Sending back error message: There was an error deploying the composite on AdminServer: [JCABinding]
[adapter-Apps-101-JournalImport.InsertJournal/1.0]Unable to complete unload due to: Cannot locate Java class oracle.tip.adapter.apps.AppsTableWriteInteractionSpec: Cannot locate Java class
oracle.tip.adapter.apps.AppsTableWriteInteractionSpec..>
Since I have no past experience kindly suggest me what is right way to do this.
Thanks,
Shri

Hi shri,
Can you check the targets of oracle apps adapter that is it deployed on both cluster and admin server both.
Deployment-> OracleApps Adapter-> Targets
Regards,
Anshul

How to setup SSL for Business Objects

Dear colleagues,
can you help with the following issue: we want to setup SSL for BO and have dedicted information for the implementation of certificates and know that sapcryptolib needs to be used. But there is no information provided how to inform BO about the location of the sapcryptolib. Can anybody provide a hint for this? Many thanks in advance.
Best regards,
Detlef Kreiss (HP Outsourcing services)

Detlef,
The SAP Crypto library is not required if you are simply trying to secure the webserver using SSL.
Securing IIS (.NET infoview, or IIS fronting a Java application server) is pretty simple as you would follow the same steps to SSL secure it as you would any IIS server (there is an add certificate button in the properties of IIS).
If you are using a Java Application server solely and want to SSL secure that, there is an SAP note to describe the steps required to add an SSL certificate to the (Tomcat) Java keystore.
Please see:
1299147 - How to setup SSL on Tomcat in Business Objects Enterprise XI 3.1?
https://bosap-support.wdf.sap.corp/sap/support/notes/print/1299147
-Brian

How to create new scope for SharePoint calendar?

How to create new scope for SharePoint calendar?
I have a calendar list to which I want to create following scopes-
Annual View
Half Year 1 (Jan-June)
Half Year 2 (Jul-Dec)
Quarter 1 (Jan-Mar)
Quarter 2 (Apr-Jun)
Quarter 3 (Jul-Sep)
Quarter 4 (Oct-Dec)
How this can be created. Any help appriciated. Thanks.

Hi Pratima,
Can you please see below link and code snippet for how to
format date in gridview.
http://www.aspdotnet-suresh.com/2011/05/how-to-set-date-format-in-gridview.html
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title>Gridvew Date format</title>
</head>
<body>
<form id="form1" runat="server">
<div>
<asp:GridView runat="server" ID="gvdetails" DataSourceID="dsdetails" AllowPaging="true" AllowSorting="true" AutoGenerateColumns="false">
<RowStyle BackColor="#EFF3FB" />
<FooterStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<PagerStyle BackColor="#2461BF" ForeColor="White" HorizontalAlign="Center" />
<HeaderStyle BackColor="#507CD1" Font-Bold="True" ForeColor="White" />
<AlternatingRowStyle BackColor="White" />
<Columns>
<asp:BoundField DataField="Date1" HeaderText="Date1" HtmlEncode="false" DataFormatString="{0:s}" />
<asp:BoundField DataField="Date2" HeaderText="Date2" HtmlEncode="false" DataFormatString="{0:D}" />
<asp:BoundField DataField="Date3" HeaderText="Date3" HtmlEncode="false" DataFormatString="{0:m}" />
<asp:BoundField DataField="Date4" HeaderText="Date4" HtmlEncode="false" DataFormatString="{0:d}" />
<asp:BoundField DataField="Total" HeaderText="Total" HtmlEncode="false" DataFormatString="{0:C2}" />
</Columns>
</asp:GridView>
<asp:SqlDataSource ID="dsdetails" runat="server" SelectCommand="select * from DateFormat" ConnectionString="<%$ConnectionStrings:dbconnection %>"></asp:SqlDataSource>
</div>
</form>
</body>
</html>
Hope this will help you.
Regards
Soni K

How to setup the RV120W for quickvpn

Hello,
The PPTP client from Windows 7 is not working with this router; therefore I would like to try the quickvpn.
Is there any paper from Cisco explaining how to setup the RV120W for quickvpn ?
Thanks for any help

User Guides for thee rv120W are here:
http://www.cisco.com/en/US/docs/routers/csbr/rv220w/quick_start/guide/rv220w_qsg.pdf
http://www.cisco.com/en/US/docs/routers/csbr/rv120w/administration/guide/rv120w_admin.pdf
and theres some more stuff over on my site:
http://www.linksysinfo.org/index.php?forums/cisco-small-business-routers-and-vpn-solutions.49/

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?

How to setup IPV6 boundary for SCCM 2012 R2 Primary Site?
I have Direct Access implemented in my environment. I have Windows 8.1 machine connecting through direct access.
I want to manage the windows 8.1 through SCCM. How do I setup IPV6 boundary. Can someone guide me through?
Below are the Windows 8.1 client IP Configuration
C:\Windows\system32>ipconfig
Windows IP Configuration
Wireless LAN adapter Local Area Connection* 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Wireless LAN adapter Wi-Fi:
   Connection-specific DNS Suffix . : home
   Link-local IPv6 Address . . . . . : fe80::7466:11a5:39ed:ffb0%4
   IPv4 Address. . . . . . . . . . . : 192.168.1.5
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.1.1
Tunnel adapter isatap.home:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fd:1494:1339:93d6:439c
   Link-local IPv6 Address . . . . . : fe80::1494:1339:93d6:439c%9
   Default Gateway . . . . . . . . . :
Tunnel adapter iphttpsinterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819
   Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:206c:f857:ddbe:2f2b
   Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10
   Default Gateway . . . . . . . . . :
Below are the IPConfiguration details for Direct Access server
C:\Windows\system32>PsExec.exe \\MURA01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:3333::1
   Link-local IPv6 Address . . . . . : fe80::b1ad:1c29:b4a:9125%15
   IPv4 Address. . . . . . . . . . . : 10.192.1.25
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter isatap.{3D6A5E86-D85A-46C8-B69B-FFCF6D5D849C}:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1:0:5efe:10.192.1.25
   Link-local IPv6 Address . . . . . : fe80::5efe:10.192.1.25%18
   Default Gateway . . . . . . . . . :
Tunnel adapter 6TO4 Adapter:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
Tunnel adapter IPHTTPSInterface:
   Connection-specific DNS Suffix . :
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::1
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000::2
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:2552:e9f8:87d3:ed8e
   Link-local IPv6 Address . . . . . : fe80::2552:e9f8:87d3:ed8e%20
   Default Gateway . . . . . . . . . :
ipconfig exited on MURA01 with error code 0.
Below are the IPCONFIG Details for SCCM Server:
C:\Windows\system32>PsExec.exe \\sccm01 ipconfig
PsExec v1.98 - Execute processes remotely
Copyright (C) 2001-2010 Mark Russinovich
Sysinternals - www.sysinternals.com
Windows IP Configuration
Ethernet adapter Ethernet:
   Connection-specific DNS Suffix . :
   Link-local IPv6 Address . . . . . : fe80::9f0:86f9:441d:bc07%12
   IPv4 Address. . . . . . . . . . . : 10.192.1.30
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 10.192.1.1
Tunnel adapter isatap.{0749E47D-AE0A-4D47-9D37-BDDC848E56F6}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
ipconfig exited on sccm01 with error code 0.
What will be the IPV6 values to configure boundary?

Depending on how the clients connect use the IPv6 prefix of their 6to4, Teredo, and/ or IP-HTTPS tunnel. Just keep in mind that it could become a long list...
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

Using internal SSL Certs for Webview and Reskill (ICM 7.2.X)

Hi,
I would like to use corporate ssl certs for webview and reskill to avoid the user having to install the self signed certificate on the local machine. Has anyone any experience of this? Can it cause any unforseen problems?
My plan for webview is to create the certificate request in IIS for the default website, use this csr to generate the cert, then complete it by uploading the certificate.
For reskilling, I will assume I will have to do some command line stuff here ...
eg: keytool -genkey -keyalg RSA -keystore hostname.key
to create the key,
keytool -certreq -keyalg RSA -keystore hostname.key -file hostname.csr
to create the csr, and
keytool -import -trustcacerts -alias tomcat -file hostname.cer -keystore hostname.key
to import the new cert
Suggestions or comments for anyone who has tried this before would be appreciated.
Regards,
Brian

I've never done it on a version so old, but at the end of the day it's just IIS and Tomcat and importing an SSL cert is very standard.
david

HT201304 How do I prevent paying for an app and what is an in app restriction

How do I prevent paying for an app and what is an in app restriction

You can't prevent paying for an app if you buy one. You can, however, turn off the ability to install apps in the Restrictions settings (Settings/General) which blocks the App Store app on the iPhone. You can also block making purchases of extra features or capabilities from within an app, which is referred to as an "in-app purchase", in the same Restrictions.
Regard.

How do I create folders for variuos apps i.e health, news etc.

How do I create folders for variuos apps i.e health, news, sports etc.

Tap and hold down on an app con until it begins to "wiggle", then drag one app icon on top of another app icon to create the folder. Move as many apps as you like into that folder. When you are done, tap the home button and the apps will stop wiggling.
You can also name the folder whatever you want to in the white text field that will pop up when the folder is created.

How to setup Data guard for SAP database?

Can someone please tell me how to setup data guard for SAP databases?
Thanks,
Abhi

Hi Abhi,
have a look at OSS 105047 - Support for Oracle functions in the SAP environment you find this under
14
Oracle Data Guard
You can use "Physical Standby".
You cannot use "Logical Standby".
You are allowed to use Fast Start Failover (FSFO) but SAP Support is not provided.
You can use Data Guard Broker.
You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
Maximum Protection causes the primary database to terminate if problems occur in the standby database.
And here you find on Oracle white paper from 2010 http://www.oracle.com/us/solutions/sap/wp-ora4sap-dataguard11g-303811.pdf
Perhaps some SAP user have answers for you http://scn.sap.com/community/oracle/content?query=guard
regards
Kay

SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?

Hello IDM-experts,
where can my customer find information about
SAP IDM 7.2: How to setup SSO functionality for WebUI of CRM and GRC?
Customer situation description:
The situation is that we are using SAP IDM 7.2. We are using a functionality to allow our users to access a webpage from where they can gain
SSO access to the Abap systems via the SAPGui. See screenshot as an example.
Now what we want is to access the CRM and GRC WebUI also with the same SSO possibility. We cannot find any guide/best practice on how to do
this or if it is possible via SAP IDM 7.2.
You can see a weblink in the first screenshot but it does not work. It will ask you for a username and password, see second screenshot.
Kind regards,
Daniela

Do you know how the SAP GUI SSO is setup ? Is it using SNC/Kerberos ?
If it is (I suspect it is), then you will need to use similar method of authentication for the ICF Services. These cannot use SNC since they are accessed via browser, but what you want is possible.
Thanks
Tim

How to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

how to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

my problem solve by me
first create apple id
fill credit card details
and complete your account creating process.
than go to app store or itune store
login your acount
click right side - account button
than again login for account setting
next go to payment information and click edit button
when u enter payment infomation
click none button in payment method and click done button.
than ur credit card has been removed.
but rs. 60 will deducted in your account when u doing this process.

How to stop update notification for one app (iMovie) that I do not want to update

How to stop update notification for one app (iMovie) that I do not want to update. I do not want iMovie 10 taking up nearly 3 gb on my hard disc. iMovie 9 is just fine and only takes up 1.5 gb. But I get notifications to update and don't know how to turn it off. I've gone into the Purchases tab of the App store and deleted it. I don't want to turn off Update notifications (which is irrelevant in any case because I see no option to do that in Notifications system preference pane). I just don't want to be bugged about iMovie updates. The only option I'm given is to postpone the next reminder until the next morning. -- Franklin

Interesting; never came across that - here is the window I get (just double clicked on a random doc in the trash):

How do I get audio for my apps without headphones?

How do I get audio for my apps without headphones? For some reason I can only hear the audio for many of my apps through my headphones. I've got the latest version of the OS so I'm not sure what else to do. Volume works fine for all apps that use video like Netflix and YouTube. Help!

Instead of turning it off, try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.
If the reset is not enough to knock a little sense into it, make sure that everything is backed up and restore the iPad to the factory settings.

How to setup SSL cert for SharePoint apps in a three tier farm with nlb

Similar Messages

Maybe you are looking for